DIY Plastic Blanks For Adhesive Vinyl with Your Cricut | Teckwrap Opal Glow in the Dark Vinyl

Подписаться 151 тыс.

Просмотров 7 тыс.

50% 1

Shrink plastic for Beginners: • Shrink Plastic for Beg...
Affiliate links are marked with * . If you use my affiliate links, I get a small commission at no cost to you.
*Teckwrap Opal Glow in the dark Vinyl: teckwrapcrafta...
(10%off Coupon code; AMYMADE)
*JDiction UV Resin: jdiction.online
(10%0ff coupon: AMYMADE212)
*Grafix clear Shink Plastic: amzn.to/3niL98i
*Grafix Black shrink plastic: amzn.to/40cLyYh
*Grafix Sanded shrink plastic:amzn.to/3ZgWanE
*Digital caliper: amzn.to/3K5Vhu1
Buy me a cup of "resin" to help me support this channel: ko-fi.com/amymade
Instagram: @amymade.IG
Amy.madeYT@gmail.com
My Shop: www.emiialchem...
IMPORTANT NOTICE: Please ALWAYS use resin with proper precautions including wearing proper PPEs (glove, mask, respirator etc) AND working in a well ventilated space. I recommend getting a hold of the SDS (Safety Data Sheet) info that every resin company has available to the public (by law). This has all the info about the resin you are using including the precautions you need to take and first aid care. Watch my resin safety video for more info: • RESIN SAFETY | Importa...
Why do I use two different types of resin in my projects?
I use a casting resin to cast and a doming resin for doming.
Casting resin is usually low in viscosity and works very well in molds without much issue with the bubbles. Also the low viscosity will allow the resin to reach detailed area of the mold. Doming resin is thick in viscosity and holds its shape very nicely. It creates a full dome and tends to hold the surface tension much better than low viscosity resin. So lower risk of the resin dripping off the sides. It also gives the piece a smooth, flawless finish.
Videos for Resin Beginners:
Part 1 • Everything You Need to...
Part 2 • How to Measure and Mix...
Part 3 • How to Dome with Resin...
How to Fill and Seal Shaker Charms: • How to Seal & Fill Liq...
BGM: www.epidemicsound.com

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@Raynecolwell Год назад

So cute!! After you make off set, go to contour (right lower corner) and remove those pieces that it didn't fill in. A lot faster especially when there is multiple pieces.

@AmyMade Год назад

Aaah yes didn’t think of that. Thanks!

@Raynecolwell Год назад

@@AmyMade you are welcome :)

@RamTheproDragon Год назад

Thank you for another awesome tutorial! I used your last one and designed some super cute shrink plastic/vinyl koi charms! It's helped me get rid of scraps AND make something beautiful! Thank you for your knowledge and creativity!

@gabydiygoth 9 месяцев назад

Que belleza de trabajo ❤❤❤❤

@timeenuf4200 Год назад

Wonderful combination of media. You are so talented. Thank you for sharing.

@MileyonDisney Год назад

Great info, as always. Thanks!

@artmadewithsoul Год назад

That glow in the dark vinyl is so cool! I'm thinking of so many ideas I could do with it!

@bronasmom Год назад

These turned out so cute! Fun tutorial 👻

@papercraftingwithenis Год назад

Such a cool technique. Thanks so much for the demo.

@crissygiacona8022 Год назад

Your videos are amazing!!

@ArtemisSilver 9 месяцев назад

Hi Amy, thank you so very much for making all these superbly informative and beautiful tutorials. I have watched almost all of them and I even get the same Rustoleum spray you use. One thing i’m not quite sure is how to tell if the spray coat is dry enough to apply resin. Mine usually dry to the touch in 30 mins, I wondered would you add reain at this point? Thank you. (Sorry if you’ve already answered similar questions elsewhere-I’ve tried and didn’t find it mentioned anywhere so I thought I’d ask you here. Thanks!)

@AmyMade 9 месяцев назад

Thank you! I usually wait overnight just to make sure!

@artsynessa1713 Год назад

Amazing i love them !🎉

@KoopaKiiid Год назад

thank you so much for this!! I've been wanting to make acrylic blanks with my shrink plastic, but never thought to use calipers to measure accurately!! I cant wait to try this again! Question, for using regular resin, would you still recommend using a sealing spray/mod podge for the resin to adhere to? I use mostly printable shrink plastic and it still has a sandy like texture after shrinking, dont know if that texture helps the resin stay on or if i should continue with the modpodge

@AmyMade Год назад

Thank you! The printables have special coating on it so you don’t need to seal it

@creationsbyvalerie Год назад

Awesome.....✌

@misstang01 Год назад

Hi! I love your projects! Can you explain the Tik Tok hack? I didn't quit understand what it was for or what it helped.

@AmyMade Год назад

Creating an offset cut round it makes it easier to weed than trying to weed from a larger piece of vinyl

@misstang01 Год назад

@@AmyMade OH ok! I see! Thank you for letting me know!

@karinaguadalupecasmaangulo7681 Год назад

hola, clean your work , why use the spray and done sell it

@meenashrestha5935 Год назад

can we use the vinyl clear film(pvc) to seal the liquid shaker?.. thanks

@AmyMade Год назад

This is not a shaker video

@meenashrestha5935 Год назад

@@AmyMade i know but before when i was watching this video, i was gonna order some pvc clear film which cost cheap for the liquid shaker... i just remembered that i watched ur liquid shaker few weeks back, and thought it would hurt to ask you 😅 sorry i comment here on randomly 😅.... but can i use pvc film for seal?

@peaceibeh29 Год назад

Pls where can i order shrink plastic

@AmyMade Год назад

Did you check google? Or for your convenience, I put everything in the description box of this video

@Barfitorscarfit Год назад

which acetate do you use? I only see grafix shrink in your links?

@AmyMade Год назад

That’s because that’s what I use! Lol

@Barfitorscarfit Год назад

@@AmyMade Oh I didn't know shrink plastic was called acetate as well..my bad!

@AmyMade Год назад

I think you’re confused. I used shrink plastic for this entire project. And only used the acetate setting on the design space because there’s so no specific setting for shrink plastic. I chose acetate because it’s the closest material to it.