DIY Project. How to & Easiest way to fix a leaning fence without removing the fence pole? Pinoy Tayo 

Thank you! DOING THIS RIGHT NOW! Had no clue how to begin. You're awesome!

Thank you. Found out the company that put my fence in didn’t use enough concrete to hold the post.

This was a good job you did. Smart and with the least effort and expense. You can be on my team anytime.

Great job dude. I just fixed my fence and posted a video.... my fence was only 1.5 months old when it started to lean.... noticeably

Thank you so much!! I think this is what I need to do to secure my chain link fence posts!!

thank you for this video, that makes a lot of sense.

Supplies needed - croc sandals

Now thats a privacy fence. My noisy neighbor would still look over that fence even if it was 12ft tall lol.

Thanks for the video. It did the job of explaining how to level a sagging fence vertically,.. You did show the right tools and the the cement type. However, you did not mention which zone you are in and the depth you have to go. Overall good video.

Helpful video. Thanks!!

Thanks, kfor the information.

Great job!

The contractor accidently hit my fence pole when they were replacing the sewer line, and I need to do this. What side bags quickcrete are you using, and why three bags. Great video, and thanks.

Might as well remove the post and swap it out with a replacement. Go 3 ft instead of the usual 2. A brick or 2 or multipurpose granite and not use the quickset cement. But hey what do I know I despise using a shovel and I'm going to have fun replacing our side fence for the 1st in 32 years since purchasing our home.

Thanks I'm going to try this

Got a letter from city! I have to do it asap. 5 poles leading at 30 degrees. How long did it take?

Thank you..

I have same issue but leaning forward. can i follow same method without detaching bolts from rails? in other words exert pressure to plumb poles by adding 2x4 forms then add concrete. let me know what you think

mine is old and only one pole is loose it's a 6ft pole that attach to my gates when i open the gates it's shaky so do i use 3 bags as well of Quickrete

What would you charge per poll I have six to do as a handyman to replace the polls is right around $150.00 of hole average Dallas Texas

Looking to find out how to "easily" fix metal fence posts that have are rising. The original cement is above the ground. Is there a way to re-sink the post and cement without tearing it all out?

I'm renewing our old fence w/new rails and pickets and came across 2 posts, which should be straightened (they have ~ 30 degree deviation fm/vertical. I digged around them same way you did, but about 12" deep, the second one even about 10", then added water to dig more next day, but to my surprise, I could move that 2nd post easily any way I want after that water added. So I straighten them both planning to add cement mixture and water, but then got stuck on the doubts if I need to add any cement in the holes. The posts are aluminum and the fence is pretty light (cedar, 6'). The original cement has practically perfect cylindrical shape, so for the future possible repairs it would be so much easier to deal with those perfect cylinders than the mines of irregular shape. So my question is: what will happen if I just surround those now straight posts (with existing cement cylinders on the bottom of them) with the soil (it is in Texas, soil type of clay)? Will it keep them straight, or it is absolutely necessary to remove the old cement, or at least to add some more new? Thank you for the great film, very informative.

My fence had less post as the person who loved didn't put hardly any post bit are joined by little wood on top on the joints my fence is leaning inward from the top and also part of its come off from the panel on bottom so not partley attached can you help how to do these two points thanks

Is it straight if you put a level too it?

What if it needed to go the other way? 😉

good idea not to pull it out. i tried it once it hurt my back.

Anyone knows how to fix leaning fence that is installed between two concrete walk-way?

This is helpful after watching the above video. Thank you. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yWpQtKJBsMU.html

I bet that metal pole cost alot

I used that cement to install post for chain link and and is the worse product ever , after 24 hours I can pull out the post by hand ... I need the redo the kid with another cement ... time and money 🥵

Woodglut is a good solution for every woodworker.

Be careful that drill is almost stripping those wood screws Chief & Your video is helpful, but I don't think my customers would want to see a high pile of concrete afterwards.