DIY QUICK RELEASE FOR G29/G920 | SIMRACING 

!!!IMPORTANT!!! You really dont need to cut the wire! The plastic connector ( the white one that goes to the motherboard) is very soft, you can use tweezers to open it up pin by pin and litterally slide out the metal part inside, and slide them back in with no problem, No need for soldering or a new cable! Also i drilled a small hole in the grill part of the back and I’m keeping the motherboard outside of the wheel! So no need for desoldering any button!

Why does the electronic board have to be in the wheel base?

Hey dude! What’s your force feedback settings for beamNG? Should I put smoothning high or low? Also nice work! I hope the 2020 F1 mod gets released soon!

does g29 work without pcb connected? i just want to remove it

why tf did he cut the cable when you can just take the pins out and put them in again

thanks you are top guy , from Brazil

Can I buy the 3d printed part somewhere? As i dont have a 3d printer

I don't understand how you got to fit the pcb inside the case. I have a g920 so smaller pcb but i find no way to fit it inside

Hi! where can i buy the replacement cable? (the cable you cut in this video)

I've purchased and printed it, i noticed there weren't options for 50mm or 70mm wheels, but of course i'm sort of expecting it. My guess is that the diameter for this one is 52mm so yea it doesn't really fit but other than that the adapter is one of the shortest option i can find

cool, but how sturdy is it? and you lose button functionality on the wheel? did you revert this mod afterwards?

Hi! I printed this adapter and I’m currently using it with a f1 wheel from amstudio and its working great, i advice to put some black electrical tape on the steering wheel end to ha a more snug fit, but for the rest it works very well for me!

Ma se uso una corona nuova con paddle shifters quest ultimi funzionano o funzionano solo quelli del g29?

Do the extra buttons that are more than the G29 work?

Please note: Technically, you don't need to de-solder the wire, you don't even need to connect it to anything! With the new Logitech software, the wheel is recognized, the force feedback does work but all the buttons are pressed in meaning you would need to de-bind them in the software/sim. THERE IS AN EASY WORKAROUND TO THIS! If you find a breadboard jumper wire, (make sure it's male to male), you can plug the jumper wire from the black wire to the yellow wire on the cable coming from the wheelbase, which fixes the issue of all the buttons being pressed AND makes sure your FFB works flawlessly.

Looks like you don't have to keep the controller board connected, you just need to complete the circuit on the first two pins of the connector, watch this guy’s video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xn8MtHFnERk.html

so, i knew your project on thingiverse.com, but because of my current conditions i cant pay for it, im sorry that i dont paid, but thank you so much for it and.. yeah so i came here and subscribe and like the video because you deserve it.

Można coś takiego kupić, bo nie mam drukarki 3D?

there is clearly a lot of play there

May as well buy a fanatec wheel. So you have to do all this but then get another wheel to use buttons

good friend can you explain how you soldered the wires all over again

so now is it available with the ecosystem ?

Would't it be too warm for the motherboard to be replaced in the wheel base? Because sometimes when you playing with the wheel, u can feel the back to be warm. Would't it damage it?

Brando vibing Wikwik wikawika

does it work on the g920 too?

I used this system and the bit on the wheel snapped, is there any metal ones that you can get

How do all the buttons on the wheel face work with this?

Does it still work after you cut the cord

How do i attach a 70mm bolt pattern steering wheel?

Hey are you still making these 3d prints?

hi, if i have an external wheel do i need to save the cable from the wheel?

which material did you use ?

I would of so kept the board out or cut holes in the top so buttons could stick through

good work but.... original button ....

It work on g27??

do you have a male end for 70 mm aswell? there is not one in the file

how much time did it cost to solder the wires back together when you cutted that part?

can i attach it with all the elelctronics/buttons still on?

Boa tarde. O volante não funciona sem a placa? É Possível montar sem ele?

What wire did he cut

What music it’s called

Why you put the electronics in the case?

But how to use your buttons?

Am studio copy

it has slack wow..........

Looks like this would easily break tbh....

0:09 wysi

wow that's a terrible print. good Lord

hey was going on i would like to buy this off u instead of me making it if you in inbox me asap

works with g27?