Тёмный

DIY Radiator Cover | The Carpenter's Daughter 

The Carpenter's Daughter - Vikkie Lee
Подписаться 109 тыс.
Просмотров 233 тыс.
50% 1

This week, I taught myself how to make a radiator cover which will also serve as a focal point in our living room.
It was SO easy to do using 18mm MDF and treated myself to a biscuit jointer. If you have any questions or tips, feel free to comment below. You can also find my plans on how I did it here:
thecarpentersda...
Also, a MASSIVE THANKS to both these RU-vidrs - their videos really helped!
Thanks so much to the following videos I mentioned. These gave me confidence to do it:
Spend Time, Save Money DIY: • How to make a simple r...
Average Joe's Joinery: • Should you Build or Bu...
Also, here's the scribing video I mention: • How to scribe/cope and...
Also, this video is NOT sponsored - although the other Erbauer tools were gifted from my Dog Kennel project.
Here's everything I used (*As an Amazon Associate, I earn from qualifying purchases made through links.
):
18mm MDF sheet: bit.ly/2QGRqGj
MDF screen - I bought mine from Shepperd's DIY in Coventry
Tape measure geni.us/m0yABB [Amazon]
Erbauer cordless circular saw: bit.ly/2XgrT9s (gifted)
Erbauer battery: bit.ly/2Z0M6AE
Irwin clamps geni.us/e3yK44i [Amazon]
spirit level geni.us/Ydpz2 [Amazon]
Face mask: geni.us/PGZn9RW [Amazon]
Ear defenders geni.us/uU7T5w [Amazon]
Goggles geni.us/ioDB [Amazon]
Glue gun geni.us/LKunZh [Amazon]
Glue gun battery geni.us/K5MABY [Amazon]
Combination square (not speed square) geni.us/rTBcSl [Amazon]
Speed square geni.us/oYR7 [Amazon]
Grip gloves geni.us/bWp5O [Amazon]
Erbauer palm router bit.ly/313ZpC3
Chamfer router bit (45 degree) from this set geni.us/khlQZDD [Amazon]
Round core box router bit (18mm) from this set: geni.us/2hzyI [Amazon]
Erbauer biscuit jointer bit.ly/2XkIvNt
No. 20 biscuits: geni.us/IhUsNq [Amazon]
Titebond 2 wood glue geni.us/FeJAOI [Amazon]
1200mm sash clamps geni.us/1TN278B [Amazon]
Angle brackets geni.us/NwgC [Amazon]
Combi drill geni.us/ZTnqkQ [Amazon]
Fatmax combi drill geni.us/0zayJaX [Amazon]
2mm wood drill bit geni.us/sSpFR [Amazon]
Erbauer cordless jigsaw bit.ly/2QAFBBs (gifted)
MDF sealer (NOT SURE IT'S WORTH IT?) geni.us/k6pd [Amazon]
Dulux Trade Satinwood: geni.us/GzFc2 [Amazon]
Mini Foam roller kit: geni.us/vXMqndb [Amazon]
---------------------------------------------------------------
You can also find me at the following places
🛒Shop in my Etsy Store: www.etsy.com/s...
Support Me Via Patreon:
/ thecarpentersdaughter
The Carpenter's Daughter Blog:
www.thecarpente...
Instagram:
/ thecarpenters_daughter
My Facebook Page:
/ carpenters-daughter-15...
Pinterest: / carpenterslass
Twitter: / carpenterslass
---------------------------------------------------------------
FOOD:
My Food Channel:
/ tastefullyvikkie
My Food Blog:
www.tastefullyv...
My Food Facebook Page:
/ tastefullyvikkie
Instagram:
/ tastefullyvikkie
Pinterest:
/ tastefullyvik
Twitter:
/ tastefullyvikki
---------------------------------------------------------------

Опубликовано:

 

17 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 360   
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 4 года назад
Here's my written step by step: thecarpentersdaughter.co.uk/woodworking/diy-radiator-cover/
@flyc3
@flyc3 3 года назад
Love the fact you’re not one of these that has a workshop and all the expensive tools that you feel you need to buy to do these sort of projects. DIY and a dog - consider me subscribed. Love it.
@inkydoug
@inkydoug 5 лет назад
Top notch cabinetry, and I like how you explain what you're doing to your dog.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you! Kills two birds with one stone haha
@Tony-Thompson
@Tony-Thompson 4 года назад
Well done, young lady. Your skill is matched by your presenting ability. You should be on TV, in my opinion. Who am I? A long retired teacher of technology and design with a lifetime of practical skills at my disposal. That's my credential - well, part of it - and so when I say your work has considerable merit, you can take it as a fact. Ignore the mindless comments of those who have nothing better to do than belittle the efforts and talents of others. Keep up this very good work!
@andrewdavies1312
@andrewdavies1312 5 лет назад
3 things that keep me watching your videos. 1. You. Your fun to watch working and informative 2. Ideas for my own house/van 3. Hans Although. I'd probably just buy nice looking radiators. More Expensive I know but the look is worth it
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Aww, cheers :) We thought exactly the same for our bedroom makeover last year! We now have a tall upright radiator with mirror and it takes up far less space and is multipurpose :)
@billg5704
@billg5704 3 года назад
Love your video. You explain the process so clearly and make it so easy to follow. Also like that you have not chosen any unnecessary music that drowns out your voice - like some videos have. All in all you have done an excellent presentation. Well done!
@normanstronach2426
@normanstronach2426 5 лет назад
Good idea to fit a room sensor radiator valve or it will close down in a jiffy or take the head off the existing and it will never close if you don't mind continuous uncontrollable heat. Lovely job. Getting my MDF delivered tomorrow.
@PaulLockwood
@PaulLockwood 5 лет назад
Great video and great build Vicki. I think though that radiator covers are certainly a fashion choice just like coving etc. Personally I like the radiators as you can easily hang wet clothing on them and it dries quickly. I would guess that there is also a restriction by covering the radiator as to how much heat comes out, therefore costing more energy to heat the home. I know it's well vented but heat must be more directional. I bought a MDF sealer paint from either B&Q or Wickes, can't remember which. Just looks like a white paint. Only issue I see with sealing with PVA is that you would need to add water to it to thin it down, therefore adding the one element that MDF does not like, water is not good anywhere near MDF so worth the extra expense.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks Paul :) Yes, radiator covers do seem to be a very personal choice. Thoroughly enjoyed making it as it's taught me a few basics to make a recycling centre and it's going well :) The sealer I used seemed to be very watery.. thinner than milk, but the MDF soaked it right up. Haven't read the label, but don't really know what's in it.
@209porker
@209porker 5 лет назад
Nice job. Very smart. Never used MDF sealer just MDF primer and two top coats. Wickes keep that sort of screen but I see the website shows it all on clearance so maybe they won't be stocking it anymore. I also use Medite MR MDF as the quality is good and the edges less fluffy than B&Qs. If you need a nice smooth cut edge don't bother sanding before priming. Sand after a coat of primer and it can be sanded very smooth.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks for the tips! I'll try looking for that MDF if I want to do some more :) Also, yes, I spotted it was all clearance there too and my local stores didn't have it.
@JamesManCave
@JamesManCave 5 лет назад
I made the same project back last year. I opted against using the mdf sealer and the paint finish I had was great without it. But like you, totally made sense to make one rather then buy one 👍
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
The place I bought the MDF screen advised not to buy the sealer because they thought it was expensive PVA glue, but deep down wanted to try it. But so many people since have said that cheap undercoat did fine. I'm just not sure why this product has so many great reviews as it soaked up almost 500ml which cost a fiver. Also, I've since read the label on my satinwood and it says self under coating, so won't bother on my 2nd one. A hardware store
@bubels23
@bubels23 8 месяцев назад
I made the last one with old tongue and groove and made slats as a screen, I’ve also got second hand brass ones however new project I’ve found lots on Etsy, hundreds of different designs. I need a biscuit cutter in my life now 😂 well done you! Very professional
@bidders77
@bidders77 5 лет назад
Nice job . You've every right to look so proud of yourself!
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you :) I'm pinching myself even more now we've put the TV up on the wall and moved the sofa. What a difference it is! 😍
@Thebacongirll
@Thebacongirll 4 года назад
Very nice job! I was wondering if you could hang a tv above the radiator while it's on? Or should you keep off.? As i wanted to do the same but not sure😖
@dieselbushcraft1299
@dieselbushcraft1299 5 лет назад
I agree with comments that you work very professionally. One question though which has always sprung to mind about radiator covers. Do they effect the efficiency of a radiator? Granted you have included plenty ventilation in yours. Also the TRV definitely will be rendered useless which is fine if the valve is turned to full. Well done though you have made a very neat job.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you :) I'm yet to find out in the winter. It may be difficult to tell in this room though as we have two radiators (it used to be a very cold room). However, Rob who recommended the vents says there should be no issues.
@maxximumb
@maxximumb 5 лет назад
They can slow the heat initially (10-15 mins), but once the cover is warm heat will still radiate and the vents will allow normal convection currents to do their thing.
@tracey2patrice
@tracey2patrice 3 года назад
Great video, Can the opening at bottom be closed/covered? Just brought home and none of covers go to floor, although floors were repaired up to cover. Not visibly pleasing.
@brucemchattie8532
@brucemchattie8532 2 года назад
Awesome. Searched you tube on doing this and found yours. Love the video and have now subscribed. Layman’s terms used for us DIYers. 👌
@stuartjones7903
@stuartjones7903 3 года назад
Came across your excellent vid whilst researching radiator covers as I have 2 to make Pretty much got everything I need to know from your excellent video I was going to make mine from pine having never worked with MDF before but not now Thanks for a god resource of info
@ranjankc121
@ranjankc121 5 лет назад
Your work is completely professional. So neat and perfect...
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you so much 🥰
@teslaandhumanity7383
@teslaandhumanity7383 5 лет назад
Jali stock mdf screens . Awesome all that planning payed off and new tools 🧰 too . Emulsion I would use as a base . I couldn’t do this my maths is awful. So impressive xxx
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks! My maths is awful too 😂😂 It was really simple... I initially just held a thick book either end and measured the length. Then after deciding the strips would be 15cm wide, I subtracted that from length and divided it by two (or three) sections, rounded it up and got my horizontal cuts. I too was contemplating just white emulsion as spotted it's often used for them :)
@MrMajorduck
@MrMajorduck 5 лет назад
You might want to consider MRMDF if you routing profiles as you get a much better finish. Normal mdf is quite fluffy you needs lots of sealing and sanding and on those flues you'll lose the sharpness.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you! Do you know any mainstream DIY stores that sell it?
@nixy102
@nixy102 5 лет назад
I have a question. How did you clamp the second half of the cover? Your sash clamp is only 1200mm but you rad cover is 1800mm. Unless you just clamped it near the middle area rather than at the biscuit joints? But that would probably cause it to bow if too tight. Its not shown in your video. Great video though well done. I'm been putting off making my own rad covers, maybe this is my push to start and get it done.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Good question! On the second section, I clamped above the biscuit join towards the top below the biscuit join for the bottom. Although I probably should have clamped with an extra piece of wood to crushing my chamfered edge a bit. I've just had a close look now since it's painted and can't see where I've been with the clamp, so I'm happy :)
@markevans1973
@markevans1973 5 лет назад
Get you .getting so handy with all your tools .loved the jeans with paint on so trade ! And your Timberland style boots .like a top chippy ! Keep up the good work Vicky 🥰
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks! :) The problem I find is I don't like forking out on tools which can limit some of my jobs. So I treated myself to the biscuit jointer this week and so glad I did!
@markevans1973
@markevans1973 5 лет назад
@@TheCarpentersDaughterUK never heard of that till now . biscuit tool .your welcome 😊
@johngratton467
@johngratton467 2 года назад
Looks very smart, Automatic Bleed Valves are essential when fitting rad covers else you'll have to dismantle the cover to access the manual bleed valve, having the Thermostatic Radiator Valve (TRV) and Lockshield Valve (LSV) within the enclosure is a mistake you'll later regret the TRV will be unable to monitor the room temperature, forget about convection, there will not be enough air movement for the wax stat in the TRV to operate to the room ambient temperature, also no (quick) access to the LSV in an emergency and no way to adjust the temperature of the TRV. Nothing wrong with rad covers just ensure the TRV and LSV are outside the enclosure, I worked as an electrician mainly fitting Central Heating controls for a local authority, these problems became the bane of our lives a few years ago.
@darrenmackenzie1892
@darrenmackenzie1892 Год назад
Ive never used a router before can you tell me the bits required to chamfered the edges and the grooves you did? Im going to buy the same router as you. What other method can i use instead of a biscuit joint as i dont want to spend the money on a biscuit cutter for one project if you know what what i mean. Thanks again
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK Год назад
Great questions! If you don't want to buy a biscuit joiner, you could use dowel joinery - you can watch my do this for the first time here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fduBysIH2JQ.htmlsi=tuvrWoth_nDn2QUx Or you can simply build the frame and add another support or two and clad the top - or push some strips of wood together for your top and fix together with some strips of wood at the back. Also, you can see this router set closer in this video if useful: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xwu2GAlKDss.htmlsi=UHcI9S7TjqzqbPnF And finally, you might find my radiator build written tutorial here useful: thecarpentersdaughter.co.uk/woodworking/diy-radiator-cover/ Let me know if you need any more help!
@LonghornWorkshop
@LonghornWorkshop 5 лет назад
The flutes was a very nice detail. Nicely done.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you :) Now I know they're called flutes 😂😂
@wisher21uk
@wisher21uk 5 лет назад
Well done looks very good we got one once second hand an there was a damaged area we looked everywhere for the panel but in the end I had to fix it, I used lolly pop sticks and cut and shaped them to make and patch up the damage, and no one ever knew where it had been repaired, and all that talk about biscuits made me hungry what biscuits are best rich tea or digestives ? Would custard creams be double the strength ? Keep up the good work 😁
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
😂😂😂 Surprised you're the first one to talk about biscuit-biscuits 😂 Yout fix sounds perfect :)
@wisher21uk
@wisher21uk 5 лет назад
The Carpenter's Daughter thank you it looked brilliant once painted
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
I agree! I think it'll look even better once the wall is painted and made another now to paint too :)
@wisher21uk
@wisher21uk 5 лет назад
The Carpenter's Daughter well done you, there’s no stopping you is there, you’re most blokes dream doing all the diy, some women don’t even know what end of a screwdriver to hold 😂😂😂😂
@markmiller6402
@markmiller6402 5 лет назад
That’s a great build. Am decorating my living room at the minute, and your rad cover design is going to be the one I use. Thanks, and keep up the good work.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 4 года назад
Thank you :) Hope it goes well!
@JamieSandersonx
@JamieSandersonx 4 года назад
Pretty new to DIY myself, and this is a project I want to attempt. This is a fantastic video with all the info on how to complete everything - thanks!!
@VampyRagDoll
@VampyRagDoll 5 лет назад
Nice job chick. I was thinking about you when I made my garden gate last week. It's by no means perfect but I'm proud of it. The old one is knackered but I'm going to try and use parts of it cut down to make a gate mid way to stop the dog running round the entire garden.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Brilliant :) And love the sound of reusing your materials. You should post a pic of your gate on my Facebook page :)
@ericthekingthekingtheking4842
@ericthekingthekingtheking4842 5 лет назад
Wow wow wow my mrs struggles putting the wheelie bins out 😂 never mind knocking up a Rad cover
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
😂😂
@terretulsiak
@terretulsiak 3 года назад
Maybe try being encouraging and supportive and she may try doing something more ambitious...
@peterduncan5268
@peterduncan5268 2 года назад
Brilliant that made me laugh 😃 🤣🤣
@tsemybaatuud1872
@tsemybaatuud1872 4 года назад
Wooow finally a video that is understandable and explains the process while doing. Such a good video. 👍👍👍👍
@charlottetucker985
@charlottetucker985 5 лет назад
I found the screening fairly easy to find the thing that got me was the price! Couldn’t find anything less than £40 for the size I needed. And for that price I managed to pick one up in great condition second hand. The screening is really easy to come by on eBay if you’re happy to wait for postage though :) Also, great to see a fellow lady DIY’er 😁
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks :) Yes, I did see some online and almost choked on the price!! I'm hoping it's just a seasonal issue, but do fear they're less in demand. I've since made my second one, so Ebay may be a better option as I'm in no rush :)
@smitcher
@smitcher 5 лет назад
@@TheCarpentersDaughterUK Great job!! If you want to do it on the cheap then you can do the holes using a router and a couple of easy to make jigs. 2x bit of mdf offcut, one with 1 dowel spaced from bit and one with 2 dowels, same spacing. 1st row you clamp a straight edge and do first hole, then use single dowel jig for accurately spacing 1st row. then you remove the straight edge and you use the jig with 2 dowels. you place the 2 dowels in an L shape with the router bit and it will keep the column holes at 90 degrees. Time consuming yes but you wouldn't need to do the whole sheet, just the part you see and you could do a rabbet in the frame to hold in place...
@johnlamb2754
@johnlamb2754 5 лет назад
6'x2' screen at b&q £29.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Sadly b&q are out of stock at the moment :(
@davidlovell7724
@davidlovell7724 2 года назад
Screwfix you can buy mdf screening, just looked as am going to try my best to make one for the living room and the other in the hall for now, see how I get on?
@jamesclarke9149
@jamesclarke9149 4 года назад
Well done girl. Impressed. Doing one myself at the moment. I got my screen on Amazon. Keep up the good work.
@ferencfapal
@ferencfapal 2 года назад
Great video! What is the work bench do you use for cutting the wood on?
@grotekleum
@grotekleum 4 года назад
Great video, I shall pinch your ideas. Love your dog, not seen a border collie with that facial colouring before.
@scoyle1750
@scoyle1750 5 лет назад
I have only recently found your channel and am amazed at how handy you are, I am in the building game and have to say well done
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you :) Have just been learning what I need off RU-vid and family, or peoples' suggestions on here 😊
@robertthomas6127
@robertthomas6127 5 лет назад
Hello Carpenters's Daughter …. Around 35 years ago radiator covers where removed all over because they jack up your heating bills just as well as long drapes hanging over the radiators do. So ok maybe things have changed since? However I would never cover up the thermostat because that will effect your heating. Just mentioning this as a tip incase you should consider doing this in another room as well. Otherwise? …. Beautifully done. Nice to see you are so happy with it.
@kaycox5555
@kaycox5555 5 лет назад
Really, really looks terrific.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you! I'm really happy with how they turned out 🤗🤗
@xxr0se_c1llxx18
@xxr0se_c1llxx18 4 года назад
Hello👍, I thinking of buying the biscuit jointer you have, was it easy to set up and use? I've never used one, thanks
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 4 года назад
I thought it was rather easy :)
@xxr0se_c1llxx18
@xxr0se_c1llxx18 4 года назад
Brilliant, thanks for replying back so quick👍
@maxximumb
@maxximumb 5 лет назад
The perforated MDF sheets might not be available in the large single sheet, but most DIY stores sell smaller sheets. As your design is in two panels, you could have used 2 panels. If you can only find narrower sheets, usually sold as cabinet door panels, then making your radiator cover into a 4 panel design would work as all the MDF panel joints would be hidden inside the radiator cover. MDF sealer makes a huge difference to the final paint finish. If you can't get the sealer use PVA applied in a thin coat on all cut edges and a thin coat 50/50 PVA + water mix for the surfaces. The water might make the MDF fluff rise on the first coat. When it's dry sand with a fine sandpaper and repeat. Like with all finishes, the more time you spend on the preparation the better the end result. You may need to sand and seal a couple of times, even with MDF sealer. A gloss paint roller (foam) is good for applying PVA. The end result looks fantastic as usual.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you. I saw a few smaller sheets online, but they were quite pricey I'm comparison. However, it may be a better solution for the smaller one I've now made this weekend.
@maxximumb
@maxximumb 5 лет назад
Oh another tip, buying wood and sheet materials from your local timber merchant or building suppliers is generally cheaper and they will deliver.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you! I still don't know many places in this area, other than timber for sheds and fencing and I've been here 5 years 😂
@Rossip00s
@Rossip00s 5 лет назад
Not wanting to sound patronising or anything but it's so good to see a woman get stuck into DIY...My wife struggles to put the top back on a bottle of ketchup....
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
😂😂 I have my moments like that 🤣
@andrewsimpson7400
@andrewsimpson7400 4 года назад
Oh no! Always make sure you put the top back on properly. I once shook a ketchup bottle at a friends house; the top came off and the ketchup flew across the room, up the wall and along the ceiling. The conversation suddenly stopped :)
@indiastop1045
@indiastop1045 4 года назад
Sorry to hear about ur wife’s inability in the DIY arena. In my household it’s the opposite. I’m the diy er and my husband not. Over 19 years I have been able to train him into a labourer and heavy stuff lifter.
@sonja_rademacher
@sonja_rademacher 4 года назад
@Rosco Then you should teach her how to work with tools and stuff. She can learn it.
@lin5683-d4m
@lin5683-d4m 3 года назад
🤣🤣🤣🤣🤣
@deansjball
@deansjball 5 лет назад
Great stuff as ever Vikki! Great to see your confidence growing with each project you do!
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Cheers, Dean :) I was so excited to do this and yes, I am feeling braver to try bigger carpentry projects 😍
@RiotBadger
@RiotBadger 3 года назад
This is so good and the end result is fantastic!
@rattylol
@rattylol 3 года назад
Years ago before I knew anyghing about joinery and had no tools, I made all my radiator covers with angle irons and plastic joiner blocks, haha! theyre still standing.
@theresasmith8533
@theresasmith8533 3 года назад
I'm guessing all the down votes are pizzed off blokes who wish they had the knowledge,tools,brains and space....! Bloody fantastic video chick....Superb x
@snatchios1
@snatchios1 3 года назад
The irony. It appears you are a sexist
@emm_arr
@emm_arr 5 лет назад
Good work! Coping saw? Have you considered Iwasaki wood files from Crimson Guitars? They leave such a good finish, you don't need to sand.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you for the suggestion :) I rather like the idea of making a guitar too 😂
@SteedmanWhite
@SteedmanWhite 3 года назад
Great video! I want to make one of these myself so I’ll definitely revisit!
@simonbriscoe8324
@simonbriscoe8324 5 лет назад
Great Job again Vicky. What did you think to your Erbauer power tools? I'm in the market for power tools but unsure which brand to choose. I'm a DIYer/hobbyist so dont want to spend a fortune but dont want to buy cheap neither. I've looked at Macallister, Evolution, Triton. Can you reccomend any please?
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks! I don't really have a great deal of experience to compare them to anything else. But my favourite tools from these are my circular saw, jigsaw and palm router. I love not have to plug things in with the first two and the palm router is nice and light compared to the double handed ones. They've helped me work much quicker!
@simonbriscoe8324
@simonbriscoe8324 5 лет назад
Thank you for your reply. Was you more then happy with them? I'm looking at a router, mitre saw and circular saw.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Absolutely! As for a mitre saw, my Dad gave me his old dewalt one, then I got an evolution one as seen in my garden storage box. Both are great, but I've only used the latter one once because I need to sort my garage space lol
@simonbriscoe8324
@simonbriscoe8324 5 лет назад
Thanks again Vicky, really appreciate your replies. I'm defo swaying towards Evolution for s mitre saw and I think Erbauer will be plenty enough for me. I'm just starting out in woodworking
@MegaVander24
@MegaVander24 3 года назад
you did a fantastic job, it's funny when you started painting your pants were completely covered in paint after a few minutes🤣🤣🤣
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 3 года назад
Lol... nah, they're different jeans :) These have years of silicone and paint on them and I still haven't thrown them away 😂
@OllyBaldwin1978
@OllyBaldwin1978 5 лет назад
Hey u! Another pro job by urself. Little peek at the camper there!! Hurry up with the hols blogs yeah. All the love to u both
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Haha, will do very soon 😂 And thank you! :)
@staycalmandreflect5296
@staycalmandreflect5296 4 года назад
Am hooked to your videos 😩 Thank you for taking your time to making these vids. Very helpful and inspiring.
@stevewilliams6191
@stevewilliams6191 5 лет назад
That's a cracking job Vickie. Looks the business. And will no doubt stand the test of time unlike some of the shop bought ones which seem terribly cheap and nasty looking! 👍
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you :D I think I'm more likely to look after it now I know I made it :)
@wallingtonfilming
@wallingtonfilming 5 лет назад
Cool 😎, where did you get the panel from? Candleman 🕯☕️🚬
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks! I found it at a place called Sheppards in Coventry :)
@stephenshipley1066
@stephenshipley1066 5 лет назад
Excellent. Persevere with the track for your saw - better still, add a cross piece so you only have to measure the near side and cut perfectly square panels. Try Peter Millard's 10 Minute Workshop for shaker doors - so similar to what you were doing there. And both him and Andy at Gosforth Handyman for painting MDF - and lots more. They both do a podcast called Measuring Up - I find it just the job for ironing, complicated cooking and massive washing-up.
@dazza944
@dazza944 5 лет назад
I actually love your videos, you do a spot on job no matter what the project, you just get on with the task. Very impressive 💪🏻💪🏻
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you :) I try.... 😂 But I like how I'm working a bit quicker these days 😊
@paulkinsella8800
@paulkinsella8800 5 лет назад
Brilliant love the new tools I have too get me a biscuit joiner fantastic job 😀
@nigelp7849
@nigelp7849 4 года назад
Lovely job and lovely dog. Wish I had the tools (and skills) to make such a great cabinet.
@MakingItOutOfTheWoods
@MakingItOutOfTheWoods 5 лет назад
I think this is one of my fave projects of yours so far Vikkie. It came out really well. You did a great job! It’s perfect! 🥰🌲🦊🌲
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks, Claire! I think this is my favourite woodworking project so far, too :) It's been very inspiring and it probably worked so well as I wasn't tight for once and finally reached in to my pockets for tools I've always wanted 😂😂
@hanimaki7939
@hanimaki7939 3 года назад
well done... with simple tools you made great thing
@sharonmc5192
@sharonmc5192 5 лет назад
What is the 'Fence' on a circular saw? Is it the guide bit? Looks great.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Must admit, I'm not sure what the attachment is called. But it's an adjustable guide that came with my saw and can rest it against a straight edge to make a straight cut. Hope that helps :)
@pauldunbar4299
@pauldunbar4299 2 года назад
Brilliant stuff but one question for you How can you screw it to the wall as you've blocked it all off ?
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 2 года назад
I handsawed two l shape pieces of wood and mounted to the wall so the radiator cover just hooked on
@philmccole2634
@philmccole2634 5 лет назад
Have made loads of these, like the flutes as well nice job my regards
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you :) They're my favourite bits 🥰 Have since made my second one as thought may as well while the tools are out!
@MrJessOliver
@MrJessOliver 5 лет назад
Great video! Great job! I really love how you planned every detail. Great work!
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you :)
@charleslyall4911
@charleslyall4911 4 месяца назад
You did a great job❤️👍🏴󠁧󠁢󠁳󠁣󠁴󠁿
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 4 месяца назад
Thanks 😊
@christinechin1909
@christinechin1909 4 года назад
This is so brilliant, well done! 👍 👏 👍 👏
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 4 года назад
Thanks :)
@mikeosborn3906
@mikeosborn3906 3 года назад
A very skillful young lady I'm impressed......
@ericcorse
@ericcorse 5 лет назад
That turned out great. As an aside I believe Hans knows what you are saying.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks! Well, they do say sheepdogs are clever 😂
@bithealthcare8982
@bithealthcare8982 4 года назад
In awe. You are amazing !
@spendtimesavemoneydiy
@spendtimesavemoneydiy 5 лет назад
A big thumbs up 👍🏼 Great job. Thanks for the mentions and the link. Got a feeling this will be a very popular video for you, it's already over 4k!
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks again so much for your help, Rob! Your video was so easy to follow, it set me up for success 😍😍
@spendtimesavemoneydiy
@spendtimesavemoneydiy 5 лет назад
The Carpenter's Daughter just glad I could help! It's why I make videos! 😉
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Me too... or at least I try to help 😂😂😂
@ulysees08
@ulysees08 15 дней назад
What blade is best for cutting MDF with a circular please?
@MakeItSoph
@MakeItSoph 5 лет назад
Loved this Vikkie, it looks brilliant! And fits perfectly! 👌 Some of these comments are so ridiculous I can't even 🤦🏼‍♀️
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks, Soph! These muppets are so consumed with their own dark age views, they counterproductively waste time while the rest of us women continue to progress behind the scenes. They won't know what hit them and completely fizzle out 😂
@MakeItSoph
@MakeItSoph 5 лет назад
@@TheCarpentersDaughterUK 100%! If they have the time to comment negative things then they must have a lot of time of their hands. Feel sorry for them 😅 And in actual fact, many couldn't have done what you have in this video. Keep rocking it! 😎❤️
@escy69
@escy69 5 лет назад
What a fantastic job, it does look extremely professional. Did you add any brackets to attach it to the wall just in case it gets knocked and falls over.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks! Not yet... I'm just going to make some boxy style French cleats for them as I did with my electric fire suite. I've made a cover for the smaller one since and want to attach them all at the same time :)
@EuroB0B1
@EuroB0B1 5 лет назад
Amazing work again. Girl is bringing it with the biscuits! Inb4 your producing Japanese saw dove tails. The sealer for mdf not a bad idea, i personally have reservations with it and think is will be the next asbestos in buildings saga. As allways great work and content.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Lol.. that's a horrible thought but I feel you're quite right with having to wear a mask all the time working with it 😂
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
😂
@ClairesCraftyCorner
@ClairesCraftyCorner 5 лет назад
such a great job ! looks fabulous x
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you so much, Claire! You're not doing too bad with your router either 😉😉
@ClairesCraftyCorner
@ClairesCraftyCorner 5 лет назад
@@TheCarpentersDaughterUK 😘 must use it again soon x
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
@@ClairesCraftyCorner you should! I think used mine a year apart between projects and still don't fully understand their limits, but I'm having more fun with it 😍
@Stephens8x6Workshop
@Stephens8x6Workshop 5 лет назад
A neat job Mrs Carpenters Daughter ☺. I've never used MDF sealer, I'll have to investigate
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Both Joe and Rob have since said it's rubbish (or expensive) 😂😂 but the reviews are really good. My only gripe about it is I nearly used a £5 500ml pot on this cover. The hardware store I bought the screen off said PVA solution would be better, but thought I'd try it out first.
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Oh and thank you 😊
@Maker76
@Maker76 3 года назад
Great job and you know what liked about it? None of this the plans are on my website costing such and such, everything is there. A pleasant change.
@SomethingFromTheShed
@SomethingFromTheShed 5 лет назад
Can i ask where did you actualy get the mdf woth the holes in from
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
A couple of retailers out of stock kept recommended a place called Shepperd's DIY in Coventry. However, I've since spoken to b&q and they've not discontinued the range... there's just limited stock at the moment.
@shawng5799
@shawng5799 5 лет назад
Instead of the expensive fretwork we use the offcuts from the curtains so they match and staple them in. Easily removable to chuck in the washer.👍
@abbyg5069
@abbyg5069 3 года назад
Am just wondering how you get access to the radiator controls once the cover is in place?
@Mr_Judge_Benny_Hinn
@Mr_Judge_Benny_Hinn 5 лет назад
Good to hear that the frog has hopped off...good build...
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you! Relieved it's gone... was worried my voice wouldn't come back 😂
@leonskum.5682
@leonskum.5682 3 года назад
Beautiful work!!
@askerdanny8
@askerdanny8 5 лет назад
Brilliant as always
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks, Danny :)
@thoughtlesskills
@thoughtlesskills 5 лет назад
Suggest looking for a rip guide(fence) for your circular saw, so handy. Edit: Not 20 sec. after I commented I saw you had one.
@jessicamendoza8863
@jessicamendoza8863 Год назад
Very nice and practical, the bad thing is that you don't leave where you can get the perforated plate or stencil, which fails, thanks
@squadmeta
@squadmeta Год назад
Bear in mind fitting a radiator cover will reduce the radiators efficiency by around 25%, with the lower flow temperatures used in new installations radiator covers will be unusable in most scenarios unless the radiator is massively oversized. When this video was made it didn't matter, becoming more important now though. Lovely job regardless, looks great.
@brucedickinson12
@brucedickinson12 4 года назад
hi bought a ready made one from wickes and the top has bowed is this normal or is it faulty
@Paul7296
@Paul7296 5 лет назад
Hi. I can't find the video of how you made the wall bracket. I need to make some. Thank you
@CAVERN1234
@CAVERN1234 5 лет назад
The lines you put in are called flutes. Fantastic job
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you! :) I'll remember that the next time I do it again. That's my favourite detail 😍
@joefairfield705
@joefairfield705 4 года назад
You are awesome!!! Well done 👏🏼👏🏼👏🏼
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 4 года назад
Thank you so much!!
@charleslyall4911
@charleslyall4911 7 месяцев назад
Great job ,thanks🏴󠁧󠁢󠁳󠁣󠁴󠁿👍❤️
@spudmourph73
@spudmourph73 5 лет назад
Love your videos, thanks for sharing your tips...regards from Ireland...
@Bazza1973ify
@Bazza1973ify 5 лет назад
Keep an eye on your router bits Vicki, they can have a tendency for the bearings on the end to work loose & fall off or the bearings to seize up, which ruins your day as well as the piece you're working on, the better quality the bits the less this happens, at the same time the cheap sets & single bits you can get on eBay are fine & more than adequate for the work you're doing... Just keep an eye on the bearings that's all, radiator cover looks great by the way 👍
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thanks for the tip! I do have a selection that has some bearings missing, but they were handed down to me, so thought I'd buy some new ones for this. Will keep my eyes peeled :)
@Bazza1973ify
@Bazza1973ify 5 лет назад
@@TheCarpentersDaughterUK I did look at getting replacement bearings but tbh it's as cheap to replace the bits (if you buy the cheap sets off eBay)
@doubled571
@doubled571 3 года назад
Great video. Well done 👍. Really helpful, thank you.
@MrAas41
@MrAas41 4 года назад
did you do the router centre cut with a plunge router or with just a normal router? was wondering how you done it without a plunge
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 4 года назад
Normal router and just lowering it carefully while it was on if I remember.
@MrAas41
@MrAas41 4 года назад
@@TheCarpentersDaughterUK amazing! Thank you so much
@Mark...
@Mark... 5 лет назад
My local b&q have always have the MDT mesh in stock when I’ve needed it, they generally have 3 or 4 different patterns
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Ah... that's the first place I went to, but called their head office and none were anywhere in the business. I'm wondering whether it's because it's almost Summer, so perhaps they don't sell as much time of year. Once I hear about stock levels again, I'll pin the link!
@ohtmanohtman9029
@ohtmanohtman9029 3 года назад
I like what you do. Respect
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 3 года назад
Cheers :)
@chrishendriks3205
@chrishendriks3205 3 года назад
We’ll done, good job 👍. But seeing how you are standing throughout this whole project, makes my back hurt 😔. It always amazes me that people can endeavour these positions for such a long time!
@raylawson72
@raylawson72 4 года назад
great to watch and fantastic cover too
@matthewharmer1656
@matthewharmer1656 5 лет назад
Looks really nice..
@TheCarpentersDaughterUK
@TheCarpentersDaughterUK 5 лет назад
Thank you so much! :)
Далее
Fitting Kitchen Plinths | The Carpenter's Daughter
4:22
Мечты, которые сбылись♥️
00:17
How to Make Simple Radiator Cover DIY
16:16
Просмотров 49 тыс.
How to make a radiator cover
6:13
Просмотров 21 тыс.
the Rise and Fall of Adobe
28:08
Просмотров 534 тыс.
Building a Tiny Office Pod Under My Stairs
51:47
Просмотров 4,2 млн
Im on Instagram.. and build radiator covers
7:23
Просмотров 25 тыс.
Why don't people use these for floating shelves?
18:13
Bad Beginner Cabinet Tips
24:21
Просмотров 1,3 млн
Make Your Own Radiator Cover With This Easy Tutorial!
10:57