Тёмный

DIY RAPTOR LINER | MAKE YOUR BED / TUB BADASS 

AdventureN
Подписаться 1,9 тыс.
Просмотров 88 тыс.
50% 1

Welcome to Build EP 02. You can follow me spraying in a DIY Raptor Liner Tub Liner for my Hilux. Spraying the Raptor is the easy part. All the prep...not soo much. Hopefully, by watching this video, you will see it's a simple job. Just time to finish it.
Below is a list of products you may need/require:
Raptor Liner Product: amzn.to/3NCfdWZ
Raptor Liner Spray Gun: amzn.to/3qQOkWr
Festool Orbital Sander: amzn.to/3NjVvhx
Sanding Pads: amzn.to/3CyX5Hr
Sand Paper: amzn.to/3pdtQqs
Wax and Grease Remover: amzn.to/3Jmc8YP
Masking Tape: amzn.to/46afbwT
Plastic Drop Sheets: amzn.to/443h1yl
---------------------------------------------------------------------------------------------------
**Affiliate Links
Some links above included in my videos' descriptions are affiliate links. This means that if you click on them and make a purchase, I will receive a small commission without any additional cost passed onto you. By doing this, you are helping to support the channel!

Опубликовано:

 

24 июн 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 48   
@thepuresaltchannel
@thepuresaltchannel 5 месяцев назад
You crushed that. Definitely not fun but so worth it.
@AdventureN
@AdventureN 4 месяца назад
thanks mate! no it isn't a small fun job, but definitely rewarding!
@AkumaQiu
@AkumaQiu 2 месяца назад
What sprayer are you using?
@wilen
@wilen 6 месяцев назад
I'm about to paint a whole ass RV with it. I'm nervous
@boocatdog
@boocatdog 6 месяцев назад
How did it go? Wanting do a van
@wilen
@wilen 5 месяцев назад
@boocatdog it went really well, it has a very modern look, and is an easy fix to an ugly vehicle
@johnnhoj15
@johnnhoj15 4 месяца назад
By chance are you on meth?
@kr2513
@kr2513 4 месяца назад
Wash the bed with Dawn let it dry. Wire wheel on a grinder (buy 2), staying away from edges. Sand as you would by your hard line. I apply Primer sealer first.
@AdventureN
@AdventureN 3 месяца назад
Great tips!
@kr2513
@kr2513 3 месяца назад
@@AdventureNyou as well. Good on you for doing it yourself. The factory jobs aren’t even sanded before they do this, and you did a much better prep job than line-X.
@kalaganne
@kalaganne 2 месяца назад
Defo primer indeed
@matteg95
@matteg95 Месяц назад
I want to do the roof of my camper but not sure how it will bound to the roof now.
@NYGSZN
@NYGSZN 11 месяцев назад
My 2nd gen is a 6ft bed. Do you think I could get away with 2 cans???
@AdventureN
@AdventureN 11 месяцев назад
I think it would be possible. but would be a very light coats
@ricardocorsa9077
@ricardocorsa9077 9 месяцев назад
How nany cans do you recommend the kit with four cans, i have a 5.8. Short bed from chevy silverado.
@AdventureN
@AdventureN 9 месяцев назад
The thicker the better, this kit was 4 and I any used 3 from memory. Our Ute tub / beds over here in Australia are much smaller so I’d say 4
@justinhaley9672
@justinhaley9672 24 дня назад
How many quarts
@coltsblue0331
@coltsblue0331 3 месяца назад
What psi do you recommend for this. I see the instructions say 50-60. I just want to know what you use. Look great by the way.
@sostrongineedmoreofyourmon974
@sostrongineedmoreofyourmon974 22 дня назад
It kind of depends on what texture you desire. The higher the psi you will tend to get finer/flatter texture whereas with the lower range you tend to get a rougher/chunkier texture. Today, I sprayed my vehicle plastic trims at 55 psi (with the raptor shutz gun) and got a decently rough texture which is what I was going for. I plan on doing the same for the entire bed tomorrow, but when I raptor the exterior of my truck I know I’m going to go for 70 psi (depending on what my test sprays give me at that setting that day)
@tychusenfieldlarsson206
@tychusenfieldlarsson206 11 месяцев назад
do you make 2nd layer after the first one dries out
@AdventureN
@AdventureN 11 месяцев назад
yes about 30mins dry time between the first and second layer
@user-uf8nn6he3e
@user-uf8nn6he3e 5 месяцев назад
Doesn't it rub off with minimal use ?
@AdventureN
@AdventureN 4 месяца назад
no it doesn't, it's a very durable tuff coating
@kaylanwade3392
@kaylanwade3392 3 месяца назад
Roll-on is where its at. Just ask project farm
@Miles-wy1zr
@Miles-wy1zr 3 месяца назад
Gonna do this in June on my 95 tacoma
@JayGBee
@JayGBee 2 месяца назад
Get it done professionally trust me
@sostrongineedmoreofyourmon974
@sostrongineedmoreofyourmon974 22 дня назад
Excellent! I also set myself up for June to line my entire F-150 although I pushed the start until today. Will be done with the paint project by July 4th
@Miles-wy1zr
@Miles-wy1zr 22 дня назад
@@JayGBee let me pull 400 bucks out of my asshole.
@Miles-wy1zr
@Miles-wy1zr 22 дня назад
@@sostrongineedmoreofyourmon974 nice bruv. I haven’t gotten to it but I will very soon
@Kernomadz
@Kernomadz 3 месяца назад
Nice work! How many bottles did you use?
@AdventureN
@AdventureN 3 месяца назад
The kit came with 4, I used 3. 2 got a coat on everything but the third I went extra thick on the base of the tub
@Kernomadz
@Kernomadz 3 месяца назад
@@AdventureNthanks for the reply! I’m about to coat my bumpers with raptor. Great video. 🤙
@bensmith9175
@bensmith9175 10 месяцев назад
Roughly what was the total amount of time it took from prep to spray the second coat?
@AdventureN
@AdventureN 10 месяцев назад
oooo good question....I really didn't make a mental note of it. Prep certainly took the longest. Spraying the easiest. Id say about 4-5hrs for prep. Then 2hrs for spray. All a gestimation
@bensmith9175
@bensmith9175 10 месяцев назад
@@AdventureN woah, you went hard on the prerp. Thanks for the info
@onetwoshootmedia
@onetwoshootmedia 10 месяцев назад
preperation is the key to any paint job, plus I didn't want to get any paint on the new car!@@bensmith9175
@philipadcock3508
@philipadcock3508 11 месяцев назад
@adventuren how streaky did it come out?
@AdventureN
@AdventureN 10 месяцев назад
no streaks at all, just have to overlap your sprays abit
@bakervinci163
@bakervinci163 10 месяцев назад
How big of a compressor do you need
@AdventureN
@AdventureN 10 месяцев назад
To be honest I'd have no idea, something that can do a consistent 50 PSI. I guess the bigger the holding tank the better!
@apexmarketing7621
@apexmarketing7621 9 месяцев назад
Toff
@Clappedoutprojects
@Clappedoutprojects 10 месяцев назад
With the price of this stuff it’s not worth doing it yourself you can get bullet liner done for 550
@AdventureN
@AdventureN 10 месяцев назад
Whilst this is a fair comment, its more fun and having that personal satisfaction of doing a DIY project. The ability to put your hands on your hips and amire your handy work is something else in my honest opinion 😃
@nicholssexton5426
@nicholssexton5426 Год назад
'promosm' 😅
@JayGBee
@JayGBee 2 месяца назад
Not worth all the time, effort and materials when you can get it professionally done with a warranty for around $300
@chuckbronco6485
@chuckbronco6485 6 дней назад
Where the hell are you getting a spray in bed liner for $300? The local crackhead?
@lui805
@lui805 4 месяца назад
Dont waste your time on this shyt in 20 years its going to look like azz and to restore it its a fukn pain
@AdventureN
@AdventureN 4 месяца назад
I certainly won't have this tub for 20 years, that's for sure!
Далее
HOW TO: Spray on Raptor Bed Liner 2020 Chevy 2500
14:27
БАССЕЙНЫ ПО ЦВЕТАМ ЧЕЛЛЕНДЖ !
38:20
Разбудили Любимой Песней 😂
00:14
How to paint a 4WD in Raptor Bed Liner
10:44
Просмотров 709 тыс.