DIY | RATTLE CAN | GLOSS BLACK | Painting Grilles and Trim Fiesta ST150

Подписаться 10 тыс.

Просмотров 29 тыс.

50% 1

A while back I split and painted the inside of my headlights, but ever since, the faded grey plastic grilles and bumper trim have really been letting the side down. So it was time to do something about it. I removed all the horrible grey plastics and prepped them ready for paint. I went with the classic gloss black and for a rattle can job I don't thing they came out half bad.
Hope you enjoy it and be sure to let me know what you think!
Music Credits
--------------------------------
That Night (feat. Austin Salter) - Heuse
Song: Heuse - That Night (feat. Austin Salter) [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/ThatNight
Watch: • Heuse - That Night (fe...
Blank - Disfigure
Song: Disfigure - Blank [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/blank
Watch: • Disfigure - Blank | Me...
Symbolism - Electro-Light
Song: Electro-Light - Symbolism [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/symbolism
Watch: • Electro-Light - Symbol...
CHILL TRAP BEAT - OCTILARY | No Copyright Trap
Song: Chill Trap Beat
Music provided by: / @bnbproductions
Artist: Octilary
RU-vid link: • OCTILARY - CHILL TRAP ...
Make Me Move (feat. Karra) (Tobu Remix)
Song: Culture Code - Make Me Move (feat. Karra) [Tobu Remix] | NCS Release
Music provided by NoCopyrightSounds
Watch: • Culture Code - Make Me...
Download/Stream: ncs.io/TobuRemixCr

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@michaelc2759 3 года назад

Looks brilliant 👏 autoglym headlight restorer is really good if they need doing. Made a huge difference on mine

@MendItModIt 3 года назад

I’ve got a kit off Amazon which I’ll try but if they don’t come up too good I’ll give the autoglym a go 👍🏻

@jaymechanic1228 2 года назад

Fantastic video. Iv always wanted to have a go but confidence has stopped me. Thanks mate you just gave me that to have a go myself. Going to follow youe video and get some of those 3d printed vents.

@daniellele9634 2 года назад

Good job on that man! Giving me confidence to do it on my own car now

@joshuawalkey8536 3 года назад

Looks amazing bro, gonna do the same thing to my mk6 Zetec S

@Robstacey82 3 года назад

Looks good mate makes such a difference. I did mine a few months ago.

@MendItModIt 3 года назад

Definitely mate, how are they holding up?

@ashleyadams611 3 года назад

Smashing it as always mate, can’t wait for that DIY wrap, 1000 subs best hurry!

@MendItModIt 3 года назад

Thanks man, can’t wait have a go at wrapping 😬

@mwestney2k196 Год назад

would you be able to take the plastics off without taking the whole bumper off?

@MendItModIt Год назад

Yeah you can

@waynerountree9284 3 года назад

Top job great content thanks for sharing

@MendItModIt 3 года назад

Cheers mate

@robsmith7430 3 года назад

Good job mate, I know we do our mk7 ST’s but this is the first time I’ve seen the mk5 done well done 👍

@MendItModIt 3 года назад

Cheers mate. You call these a MK5? I’ve heard them as a MK5 and a MK6, makes it so confusing when trying to buy parts 😂

@robsmith7430 3 года назад

@@MendItModIt definitely mk5 I’ve had 1,2,3 and currently mk7 the mk 5 is the fiesta I always wanted but some reason I opted for the focus st170 instead

@djmandrick 3 года назад

@@MendItModIt I found out it's a Gen 5 (like you'll see it listed on ebay for parts 'Fiesta V') but also a MK6. So it's both but the terms get confused. Google search "wikipedia ford fiesta ST" was a pretty interesting read.

@shelg6082 3 года назад

@@MendItModIt its because they don't acknowledge the facelift mk4 as being the mk5 so mainly European countrys call it the fiesta 5. Where as we have the mk4, mk5, mk6, mk6.5 (facelift) mk7, mk7.5 (facelift) and mk8

@MendItModIt 3 года назад

@@djmandrick I’ll take a look, thanks 👍🏻

@martinsylvester6691 3 года назад

Looks good mate I’m going to do it on mine in the summer.

@MendItModIt 3 года назад

They make such a difference mate well worth it 👌🏻

@Robstacey82 3 года назад

@@MendItModIt yeah definitely make it look so much better. Holding up well so far. Mine came out the same as yours with the grills really glossy and the other bits not quite as good but I’m really happy with it for a diy job. The sanding and prep took me ages to do.

@lukeniblett3703 3 года назад

Good job mate looks good!

@MendItModIt 3 года назад

Thank you buddy

@jacobrichards6818 Год назад

I was thinking of doing this but worried about the paint coming off if I jet washed it, Is this possible?

@daisyrose8606 3 года назад

It looks so good 😀

@MendItModIt 3 года назад

Thank you 🙏🏻

@martynroberts780 3 года назад

Professional job 👌

@MendItModIt 3 года назад

Thanks man, not bad for rattle cans 😁

@danielstuart7715 11 месяцев назад

Do I need to sand and prime the 2 grills as a fair bit of paint has came off or is it okay to just spray the black gloss straight on

@zaink7037 3 года назад

Good job there. Best to apply a plastic primer and a hard clear coat. I need to do this on my black zetec S. I'm thinking I might tell my dad to do it as I have no spray painting experience

@joelinden1579 3 года назад

Nice one mate 👌👍

@MendItModIt 3 года назад

Thanks buddy 👍🏻

@csomerville6559 3 года назад

Looks so good in black. The thing I have left to do is the lower grill. Do you have to remove the whole bumper to get it off, or can you just Jack the car up & push the clips out that way?

@MendItModIt 3 года назад

Yeah it makes such a difference. You don’t have to remove the bumpers no but most of my arch liner clips/screws are missing so it was only 3 bolts each side for me so took less than 5 mins to remove the front bumper. The back you would have to drill out the two rivets to remove the bumper but should be easy enough to remove the diffuser and reflector surrounds with the bumper still on. 👌🏻

@lozzgotzz7962 3 года назад

I have got an mk7 Ford Fiesta 2011 that is black and has a colour code that is D9. does it matter what black spray paint you use?

@philipstogden8906 3 года назад

Hi is it easy to get the rear diffuser off . Thanks Phil

@Vredeopaard Год назад

I see a lot of people on youtube make a lot of fantastic mods to the car , buth please start to clean the rusty things on youre car mate . I,m at the moment bizzy to paint and sanding al the parts behind the lichts , bumpers an behind the weels. After this i start instal my mods . Every one his own style only saying ✌️✌️ thanks for you video's man i learn a lot from you al in the UK . In the Netherlands are not that much people on youtube

@alanpercival6428 3 года назад

I've done virtually the same to my 1,25 zetec,. But I'm looking for the rear bottom grill with the half pipe for the exhaust..

@MendItModIt 3 года назад

The cut out you mean? Not sure what the bumpers are like on those but they might do one, if not, cut one out 😈 then sand it smooth and paint 👌🏻

@oluskloc Год назад

How does it look after some time? No sun fade or cracking?

@MendItModIt Год назад

still looks great, some stone chips here and there

@oluskloc Год назад

@@MendItModIt cool to hear that, i consider paint mine

@aidan3645 4 месяца назад

I know I’m 3 years late but does anyone recommend what grit sandpaper to use

@Vredeopaard Год назад

Can you tel me youre sanding paper nr?

@victoreduardoyanezromero4866 2 года назад

Era en color mate bro, yo tengo uno y se lo hice en mate quedo como original. Saludos desde México 🇲🇽 😉🖐️

@MrSeda89 Год назад

Did color fall off in a year?

@MendItModIt Год назад

Nope still perfect bar the odd stone chip

@JMackyD18 2 года назад

Link to the paint and primer?

@alanpercival6428 3 года назад

I have a mk6 1.25Z .My fog lights look the same as the ST "but" there's no screw to release...How can I pop them out ...? Is it attack from under the bumper..👍

@MendItModIt 3 года назад

Oh I wouldn’t know on the other models but if there’s no screw I’d guess it’s clipped in from the back somehow yeah, might be a bumper off job, but then just take the bumper off regardless cause it makes things so much easier

@alanpercival6428 3 года назад

I'm thinking about getting an ST bumper do they fit a standard mk6 ZT (late)56 reg

@MendItModIt 3 года назад

@@alanpercival6428 I’m pretty sure they do, got a mate with a 1.25 that has the full ST kit on, I’ll message him and let you know if he had any hassle with it

@MendItModIt 3 года назад

@@alanpercival6428 front and rear bumpers are a straight swap mate. Only things that need extra is the side skirts, they’’d need sealing on

@medosayed9562 2 года назад

Can u tell the speay product and how to buy them

@dokesz530 4 месяца назад

To get the best pro glossy look finish it with 2k coat.Nice fiesta i got mk5 only red need to paint the bumpers 😂

@MendItModIt 4 месяца назад

Yeah man the 2k stuff I’ve used on other things since is next level, even in an aerosol 😳

@dokesz530 4 месяца назад

@@MendItModIt yeah sure i also did restore my old headlights with 2k coat.Only need to practice before u apply it.But the results are awesome.

@harveyjoe0426 2 года назад

How long did you wait in between priming and painting?

@MendItModIt 2 года назад

About the same amount of time as I left between coats of either 👍🏻

@tonywood6332 3 года назад

You can do all that without taking the bumpers off mate. All can be clipped off or out

@MendItModIt 3 года назад

Yeah it just made life a lot easier to remove them for me, some of the clips can be a pain 😂 most of my arch liner clips/screws are missing so the front bumper was only 3 bolts each side and the rear was already missing the rivets so it only took me a few minutes to remove the bumpers.