DIY Retro Arcade How To Install A 60 In 1 in A Arcade1Up Pac Man Cabinet 

Great site to order from. This video is very good, first one installed and just took time since it was new to me. Just a few things I found on my own and hope I help someone else with my same level of experience.... (0). - You will need screws, this kit (at least mine) doesn't have them it's 90% complete as indicated on the site. (Speaker nuts and bolts were listed. These were not: joystick, mounting for board, PS, amp, etc.) I wasn't happy just using 3M double sided tape. Go to the hardware store first. Since this was my first install for any of this, I kinda learned as I went. Wish a list of size screws was listed, only a minor thing. Not a complaint, this was on me. 3 trips to Lowes here. LOL - Go ahead and buy the trackball and control panel that supports it. Very awesome quality! - You will need wire. Just get a small spool of 20 gauge speaker wire from Amazon. I thought I ordered 4x of the 1 ft, but I probably only hit x1 in the cart. My fault. - You will need wire terminals unless soldiering. You will at least need them for the power supply. - EMI filter is very easy to mount on the back panel using a drill and keyhole saw. - If your screen image is shifted way down after install, I tried to auto-adjust and it didn't work. I switched DIP switch 4 up, powered up and it fixed the screen. Powered off and switch back down and the screen has been right so far. This took me a while, hope it saves someone some time. - My joystick came 8 way, switch to 4 way for most of the games on the 60 in 1. You don't have to flip the plate as shown on the site, mine just turned after removing the screws and putting them back. - There is no (that I can find) way of leaving a game back to menu other than losing all lives or powering everything down. Probably since this was meant for coins, game ends and switch game after another quarter. :) Anyway, hope this helps someone. You will be happy with this kit. Ordered several items from diyretroarcade, never disappointed.

By the most comprehensive walk through I've come across. Thank you so much!

I stumbled on this video and this is what I've been looking for to mod my Arcade 1 Up Galaga cabinet. Thanks DIY Retro.

I could not have set this up without this tutorial.. thank you! And your Street Fighter Monitor upgrade video as well! You rock man!

Very thorough instruction! I haven’t bought a Arcade 1Up yet, but when I do, I’ll get this kit and follow your video.

I just wanted to thank you for the trackball control panel i received. Its very nice. Videos are great too of course. Thanks so much.

Magnificent tutorial. I would like hundreds of them like these. Congratulations, I'm Italian and I don't understand spoken English but the video is very clear, I would even be able to make connections, ahahahaha. Bravo and still good

Thank you so much! just yesterday i was looking for a good all in 1 kit i could buy!

Thanks for this how-to just what I was looking for. I can see that a continuity testers would help on the duplicate color wires.

You guys should make a video for the 60 in 1 partycade kit, this video will work but this version has some other components and different wires that the partycade doesn't have in the kit.

Thanks for the great parts and components I recently purchased from DIYRetro for my SF2. This....is....AWESOME!! Thx!!

Thanks for the detailed instructions. :)

Awesome video! This made my installation faultless!!! You guys rock!

Considering arcade1up never fixed all my QC issues (I haven’t been able to play it after a week of owning it because of faulty buttons, faulty screen and faulty pcb) this is the lifeline I was waiting for. You have my businesses as soon as you do a street fighter version.

Thanks for taking the time to make this awesome step-by-step video! Is there a list of the games that comes with the 60 in 1?

Merci pour toutes ces explications ! Clair et précis. TOP !

This was a fun project. Anyone have any tips for cutting the slot for the EMI filter into the back panel?

Sanwa parts is a good idea to.

Great product thanks just upgraded my space invader cab

You guys rock!

Great kit, just got mine today and got it all set up. Just a heads up, I have a space invaders cab, and the included panel that the speakers mount to is about an inch too long and had to use a circular saw to trim it down. Unfortunatly the included audio amplifier broke on me, the sping loaded tabs broke off (three of them) when I tried to insert my speaker wire, so I have no sound :(

Hello! Nice tutorial! I’m not sure if I missed something but how do you connect to the monitor? Thank you in advanced

Where’s the list of bolts etc we need for speakers/anything else?

U gotta post this in arcade1 up Facebook page u will get ppl buying this

I hate to ask, but I am greeting ready to make an order with you, and I dont understand the Test and Service buttons, as they needed? Are those Just for JAMMA boards? I plan on going a few ways, with a few cabs...and I think your set up and Kit for the JAMMA 60 in 1 and the Space Invaders light up buttons kit, will be my first go at it. Could you let me know what those 2 buttons are for, I am super new to this, and just dont understand those 2. Thank you so much, you provide an unequaled service to so many DYI home builders, its a very cool thing to do for everyone, and I am sure I will be very thankful for having Your kit, and its ease of use. Thank you so much.

Thank you for lhe explaining step by steps I don't have any arcade game! Can I use this kit to build one, and using a computer monitor? If yes, please list down for me the additional electronic components. Thank you

You should of used a router and counter sinked joystick mount.

Great tutorial! I'm looking to mod my cabaret cab pretty soon, and DIY Retro Arcade looks like a strong option. Unrelated question: what model of watch are you wearing?

Thanks for this video. I just picked up a 60n1 upright (for $500, is that a good deal? Cabinet is in good shape) and by watching how you put it together helped me better understand how the console works. However, I have questions that I am hoping you can help guide me on. I appreciate it. 1) having it in an arcade as oppose to a home makes a huge difference on sound. Some of the games are really loud and I can’t play them while the family is sleeping. 😉 I saw a round yellow knob on the PCB in your video...is that volume control? Does the unit need to be in setup mode to adjust that? Is there a way to add a volume control knob on the outside so that when we are having parties we can turn it up, and when the family is sleeping, I can turn it down to play. 2) I don’t see any setup/test buttons on the outside of my cabinet. Is it possible there are just on the inside somewhere? 3) my P2 button is sticky, is it safe to say it’s the micro switch or the button itself? 4) the down position of the joystick doesn’t really work. Well, it does, but it’s like you need to be in a sweet spot, just left of the down. Thoughts on that? Is it the joystick? Could the micro switches be out of alignment? 5) my cabinet looks like it has an old CRT monitor. Could I technically change it out for a flat screen monitor/TV? Anything additional I would need to run it? 6) to change the graphic wrap on the control panel, is that something your company can do? Is there a way for me to identify the type of cabinet I have so you know measurements? Just curious. I think that is it for now. I appreciate your time on these questions and the educational video.

Just checking but is yellow wire the test wire ? Thanks great video 😊

Love the kit and thank you for this video. Easy to follow and answered all my questions save one. Is there a recommendation for upgrading the speakers? The audio sounds like it could be better ( only on some games like time pilot for example the audio is horrible ) is this a speaker flaw or an audio problem with that particular game?

I'm making a bar top cabinet one joystick a trackball and I put a coin Mech in it with only one slot do I need to hook up the other coin for coin to or can I use that coinmach with just a wooden coin for two player on one joystick

At 46:55 the cable you have hooked up to the splitter is that included in the kit? Or do you sell that separate?

What LCD driver board have others used successfully on the 1UP Generation 3 monitors? The board DYI RetroCade sells appears to only work with the Gen 1/2 LCD.

hooked mine up today and oddly enough the splitter did not work. so i have the original power supply for the monitor and the other for everything else. it seems like when i use the splitter it doesn't want to boot up.

Nice Kit! Im building a full size cab on my channel Level By Level Gaming and found you searching 60 in 1 jamma. Thanks for sharing

can i stack my monitor to that mi filter? it uses the same pc type cord, instead of having two come out one for power supply one for monitor, or can the monitor go to the power supply?

I want to convert my pacman 1up machine to jamma with this kit..do I need to buy an LCD driver board also or does the board in the pacman work as is.

I just bought a ms pacman cocktail and I want to get all the good games on it. What kit do I need? Thanks

I have a lighted marquee 1up. Can i use a triple splitter from the supply and use the third to power the marquee? I realize i need to change the male end on the marquee. I this ok? Thanks

Thanks for this. One question though. Why do you need an amp . Doesn't the 60 in 1 provide sound ? Does the 60 in 1 always need an amp ? Thanks.

I never got the amp splitter or booklet

This is a great video . 1 question . What do you power with the 3 12 volt plugs . The monitor the amp and what else ?

What size screws did you use to mount the amp and power supply?

I can’t not find the two buttons you are using on the speaker panel. What are the part niners or link to buy them on your website?

Is it 2 player hooked up like this or do you have to hook the player 2 wires up from the jamma harness to the joy stick and buttons

Not sure if this has been answered. Can you use the 5 volt off power supply to light up a marquee?

Awesome video!! How is the sound on the pcb? I hearing some of the 60-1 boards the sound is not that good.

Am I missing a link to this kit? Thanks

I want to add this to my Pac-man A1up cabinet, but I don't care about all the games and would prefer to only add one button. So, 2 questions:! 1. It looks like Buttons S2 and S3 aren't necessary, and I can get by with just S1, P1, P2, Service, and Test. Is that accurate? 2. Can I disable roms in the setup? I don't want to move my Pac-man stick from the center, so i just want to add a single button for games like DK an DigDug, and disable any games that need more than one action button. Thanks for the great tutorial!

I'm using this for an original Ms Pacman machine that obviously does not have the S1, S2 and S3 buttons. If I add two buttons, one on each side of the joystick, do I just use the S1 and S2 buttons or will it not work?

So this could be used for any build, not just the arcade 1up? All you need is a monitor and cabinet?

Hi, I have an old cabaret machine that was gutted. Can I use this kit along with an old pc monitor? What other items should i consider? Thanks a million!

Hi there, I have another question in addition to the ones I posted in my earlier comment. Because I can’t get to the back of my cabinet right now, But I’ve been looking online for the pin labels for the JAMMA harness. I’m not seeing a label for a pin to wire up a trackball. Does that mean that it’s not possible? The 60 in 1 obviously has some games where a trackball would be beneficial. Any thoughts would be appreciated.

what size screws did you use to screw in the Joystick?

I want to put one of these in a Arcade 1up Partycade. I already put a Sanwa joystick on it and it seemed to be the same internally as the stand up Ms. Pac Man 3/4 size version. Can this be done? I also don't want the speakers or the joystick. I just want the 60 n 1 Jamma stuff with wiring. Do you have a kit like this?

I kind of skimmed through the video. One question......can I also install a trackball with the included harness to play centipede?

Can someone help me? I purchased a 60-1 Blee and i seem to have wired it correctly as the lights flash solid green after power up and blinking green on the second light but the games never seem to start up. It always boots to service screen and I have verified that the dip switch #4 is off and not in service mode. I have two of these boards and it seems to be doing it with both boards. I also have multiple harnesses. One player and two player harnesses. Please Help, thanks!!!

What gauge wire are used at 38:27 thanks!!! i ordered a kit does it comes with a list of the screw size and wire gauge that im going to need or is the list available to download this way i have it ready when i get the kit thanks again!!

Are you still selling the 60.in one 1 up arcade upgrade

Hello, I ordered your kit. But I made it all the way through until 38.21. I did not see a "Pig-tail" cable with the kit. Do I have to purchase this separately at a hardware store?

is that a 4 way or 8 way joystick?

Does this work with the galaga machine if I make the hole for the joystick because I do know it only moves left to right

Great video. Do you sell the modified power cable @ 47:45 or is that something you would have to do yourself?

Any idea how to traverse the setup menu via the normal gameplay buttons when you don't have buttons for S1,.S2, & S3 hooked up? I can get into the setup menu via dip 4 but can't go anywhere from there. Thanks!

Hello. Your website states that the newest version of the 60 in 1 JAMMA harness can do sound without an amp. Is this true? I'd rather not fiddle around with an amp. Also, how much of what size screws do you need for this? Thanks.

If you have a LED joystick that runs on 12V is it ok to piggyback that on the 12V part of the power supply also?

Does this still come with the amp? And what about hooking up a trackball?

hello are these mods good for the ms pacman countercades too?

hello friend very good video I just finished my arcade cocktail furniture and I use the same 60-in-1 system, I just needed to add the test and service buttons, since I don't know how they work and I would like to help me understand better when you want to go into mode test first turn on and then press the test button? I guess it's the same for service button? In another video I saw a person who instead of a button put a switch I don't know if this is correct I hope you can help me with my doubts greetings

Any pitfalls or concerns with this kit on a Galaga Arcade1up unit?

If the amp is inside the cabinet how do you adjust the volume?

How big is the connector that goes directly on the speakers?

when my game powers up the screen goesinto power save mode and wont do anything else can someone help me out with this issue

I have to use the service switch to add credits to unlock screen. Not s1.

Two questions... 1. On the 60:1 kit page it lists the LCD board/driver as optional, but it seems it's needed to convert an Arcade1up machine like this, correct? 2. At the very end, once you're in a game and playing, what's the key combination to exit back to the game selection menu?

A question: I have a cabinet crt with 5 pins old, RGBVS. Can I connect this motherboard 60 in 1? Thanks to reply

Ok, but is that a vga cable I see hooked up to the game board and is that included in the kit?

Need one for a mortal Kombat 2

I AM MAKING A CABINET WHERE THE MONITOR CAN BE FLIPPED WITHOUT OPENING THE CABINET I MIGHT NEED ADVICE IF YOUR STILL INTO THIS ??? NICE VID BTW

Hey there retro arcade will this work with the arcade 1 up "partycade" ?.

If I did a old computer monitor in my 1 up with dvi input will this work

Do u have a kit for street fighter with more games I’ll buy this in stead of the pi this seems easy to mod

Will this work in the partycade versions?

Does anyone know for sure if the A1UP Centipede cabinet is a vertical monitor? I have PacMan and SF2 and want to pickup something different for this mod. Thx.

Other than Pacman, what other Arcade1Up cabs are vertical? Do any of them have the right hole layout already so that we don't need to buy a deck?

Will this kit work on a Street Fighter 2 cab if I use a different Arcade PCB 56 pin JAMMA board they I bought? Is this kit for 2 players or just 1?

Do you have a replacement deck with the extra buttons with Pacman graphics on it?

How do I hook it up to a monitor?

I wonder if anyone out there makes concave, silent "american" buttons, but that are also LED. It looks like the LED buttons out there are the clicky microswitch, convex asian buttons. Anyone?

Great kit, can you save high scores?

Only 12 months since the video and the do it yourself yourself kit is gone? Wtf??

What size screws/nuts/bolts are used?