No video :(

DIY Router Lift for Plunge Routers

The Newbie Woodworker

Подписаться 144 тыс.

Просмотров 94 тыс.

50% 1

Видео Поделиться Скачать Добавить в

** BUILD VIDEO: • Build: Router Lift wit... **
Here's a look at my lever-operated plunge router lift. If you want a build video, leave a comment.
SketchUp Models:
3dwarehouse.sk...
Viewing SketchUp Models: • Viewing SketchUp Model...
All Products featured in my videos: www.amazon.com...
Products featured in this video:
Xtreme Xtension Router Collet Extension: amzn.to/2AxfM0H
Rockler Miter Track (36"): bit.ly/2zqbA29
UHMW Plastic - 4" x 24" x 3/8": amzn.to/2DfE80g
Skateboard Bearings: amzn.to/2Cejt7S
Dust Right Small Port Host Kit (Rockler): bit.ly/2Qpa59a
Steel Rod (1/2" x 10"): amzn.to/2xzHMwg
Speed Squares (7" & 12"): amzn.to/2xoYuza
Screws: NOTE: I use 2" screws to attach the lift, but I don't have a link.
Spax Screws (#8, 1 1/4"): amzn.to/2NYXcnP
GRK Screws (#8, 1 1/4"): amzn.to/2QOXQmH
Makita Cordless Hammer Driver-Drill Kit: amzn.to/2uobfrU
Micro-Adjuster (Kreg): amzn.to/2Expyy5
Power Tool Switch - Rockler: amzn.to/2EJyi3m
Push Block - Bench Dog: amzn.to/2Fv6AJ2
Rockler Router Plate: amzn.to/2D4q1q9

Опубликовано:

29 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 395

@giorgioclavelli1757 6 лет назад

You are a very talented and generous person! Although I would surely enjoy a video on the making of this router lift, I can live without it. Thanks again for sharing your clever solutions.

@TheNewbieWoodworker 6 лет назад

👍

@JayDee-xj9lu Год назад

I love it. I have a plunge router and I've seen one video using the screw thread but it's a bit slow to wind up and down. I like the bit extension. I had wrestling with 2 spanners all the time. I will definitely use your lift. Thanks.

@TheNewbieWoodworker Год назад

Awesome! Glad I could help. 🙂

@stevebowen809 4 года назад

Elegantly simple, I have looked at quite a few DIY router lifts online, IMHO this is the best so far.

@TheNewbieWoodworker 4 года назад

Thanks! That means a lot! 😄

@Quincerr1 5 лет назад

By far the least complicated router lift I've seen explained for my plunge router. Thanks for your video. I'd better get started on my build.

@TheNewbieWoodworker 5 лет назад

Thanks, and you're welcome! If you have any questions, feel free to ask. I'm working on the build video, but who knows when I'll finish it... 🙄

@johnmcdonald9977 5 лет назад

I like the way you allow the idea to develop and don't beat yourself up when you make a mistake.perfect for us newbies! Thank you!

@TheNewbieWoodworker 5 лет назад

Thanks! And that's the way it happened. Truthfully, few people have the ability to do woodworking without making mistakes. It's half the "fun" (not sure that's the right word) trying to figure out how to still use something, after you mess it up! 😄

@terryarnold3657 5 лет назад

Thats very useful !!! Just retired and setting up a workshop here in Auckland NewZealand. Appreciate your video !! Thx

@TheNewbieWoodworker 5 лет назад

Thanks, and glad to help. Here's the buld video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LJqPDADi8MM.html

@tatooz52967 6 лет назад

Build video please. And I have one word for you sir..... Brilliant!!!!

@TheNewbieWoodworker 6 лет назад

👍

@scottschannon692 6 лет назад

If you need one more person requesting a build video...count me in! Well done sir!

@TheNewbieWoodworker 6 лет назад

Thanks, and I heard loud and clear! 😄

@dougprentice1363 6 лет назад

Very nice work. I bought a router lift about 20 years ago from woodpeckers. It is high quality aluminum plate with steel guide rods and bronze bushings. I like yours better.

@TheNewbieWoodworker 6 лет назад

Thanks, and LOL.

@adrianharrison5208 6 лет назад

I would definitely love to see a build video, this is the next project that I will be building for my workshop so it would be very useful to see

@TheNewbieWoodworker 6 лет назад

👍

@tomclemens807 6 лет назад

I liked your solutions. I really like that you showed all the step by step ways to navigate around on you tube. I'm about to retire and will be setting up my shop....things like your router lift will help me redo and improve the current version I built. I'd like to see a build video if you get enough interest. You're no newbie in my book. Thanks

@TheNewbieWoodworker 6 лет назад

Thanks, Tom. I'm probably not a newbie now, but I certainly was a couple of years ago! Fortunately, I learn quick. 😄

@JOESMITH-hb8vb 3 года назад

best worker - greatings from germany - saarland - JOE

@TheNewbieWoodworker 3 года назад

Danke! 😄

@dwaynebarker2771 3 года назад

Great idea. Simple but it certainly works!

@TheNewbieWoodworker 3 года назад

Thanks! Here's the build video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LJqPDADi8MM.html

@talltimberswoodshop7552 6 лет назад

That looks like a very effective design and relatively easy to build. We do need a build video.

@TheNewbieWoodworker 6 лет назад

👍

@shaunwhiteley3544 6 лет назад

I honestly believe this is the best router lift build I have ever seen! Thank you for showing it. Cheers

@TheNewbieWoodworker 6 лет назад

Thanks! 😄

@TheGholiday 5 лет назад

Brilliant. I've been trying to come up with some method for creating a router lift and finally tried you tube. Yours appears the easiest method & design I've seen. The collet extension is brilliant and I was only wondering this morning if such a thing existed. Now I know...lol.

@TheNewbieWoodworker 5 лет назад

Thanks, and glad to help. I'm working on the build video. 😄

@wwscott7595 6 лет назад

Well young man, I have watched all of your video's since you started and I have got a number of good idea's on the basis of, why didn't I think of that. I already have a shop router lift but I would use your one knowing that I could stand back and say, I built that. Don't be scared, GO FOR THE BUILD VIDEO.

@TheNewbieWoodworker 6 лет назад

Thanks, LOL. If you've watched all my videos, you know I'm not a young man (I'm 61). And yes, looks like I'll be doing some sort of build video.

@wwscott7595 6 лет назад

Well young man, over the pond to Scotland where I am 62 no one dare call a man of my age an old man. Believe or not but their is actually a Law against it. My grandfather used to say, You are only as old as you feel.

@TheNewbieWoodworker 6 лет назад

LOL. And very true.

@terristroh3965 6 лет назад

Yes, build video

@TheNewbieWoodworker 6 лет назад

👍

@gordonheacock7646 4 года назад

Well thought out, well done, good job.

@TheNewbieWoodworker 4 года назад

Thanks! 😄

@babylon5952 6 лет назад

Genius design - build it.

@TheNewbieWoodworker 6 лет назад

Thanks!

@chrisrg1948 5 лет назад

I would like the build video, much better idea than a threaded rod system.

@TheNewbieWoodworker 5 лет назад

You're in luck then! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LJqPDADi8MM.html

@speedo1664 4 года назад

Love to see a build of this

@TheNewbieWoodworker 4 года назад

You're in luck! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LJqPDADi8MM.html 😄

@jeffwatson8869 3 года назад

Looks like it works great

@TheNewbieWoodworker 3 года назад

Thanks - it definitely works great. 😄

@KnottenWood 6 лет назад

Would definitely love to see a build video with optional plans. Thanks for sticking with this invention and working through the bugs. Looks like a great solution.

@TheNewbieWoodworker 6 лет назад

👍

@jrrieder2 Год назад

Me too please!

@TheNewbieWoodworker Год назад

@@jrrieder2 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LJqPDADi8MM.html

@billyjay4672 5 лет назад

Hi Newbie I would very much like to see you build that unit as I have an old router.keep up the good work.

@TheNewbieWoodworker 5 лет назад

Thanks, and you're in luck! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LJqPDADi8MM.html

@paulnoble8695 3 года назад

Neat looking design. I like your home workshop construction considerations.

@TheNewbieWoodworker 3 года назад

Thanks! 😄

@tomhale5956 6 лет назад

I like this! Would love to see a building video.

@TheNewbieWoodworker 6 лет назад

👍

@mattlacarra2069 5 лет назад

All of us would love to see the build video. Great job again.

@TheNewbieWoodworker 5 лет назад

Thanks, Matt. It's coming. It got put on a temporary hold because I had to make some Christmas presents (which I videoed, of course). But I'll get back to the build real soon.

@MadsFeierskov 6 лет назад

This is the first lever lift I've seen. I've been thinking about this idea as well, it seems way better for a newbie build than the other lift designs on RU-vid. Well done! I just bought a cheap lift from China, so when that arrives, I'll see if it works well, if not, this is definitely the way I'll go.

@TheNewbieWoodworker 6 лет назад

Thanks. Let me know how the cheap lift works. I'm curious.

@LDhusky 6 лет назад

Yep. Build video. Would love to have this!!

@TheNewbieWoodworker 6 лет назад

👍

@normansidey5258 6 лет назад

Yes please make a build vid, I have an old Bosch P50 plunge router I use but have to lift and lock it manually, bit of a pain really. Please include how you wire start and stop switch. By the way really inspiring work, I am a retired mechanical engineer who has taken up wood working as a hobby and your videos are great for ideas, keep up the good work. Warm Regards Normski (UK)

@TheNewbieWoodworker 6 лет назад

Thanks, and you got it. As far as wiring the switch, the one I use lets you plug the router right into it. I'm not much of a wirer, if that's even a word. 😄

@halsonger1317 6 лет назад

I'd like to see the build video also. BTW, the inner tube sealer you made just solved a problem I've been trying to figure out on a portable dust collector I am making, so thanks for including that little tidbit!

@TheNewbieWoodworker 6 лет назад

You're quite welcome! I can't remember where I learned about using inner tubes, but it's nice to pass that along to someone else. 😄

@brentcollins6067 6 лет назад

I definitely want to see the build video.

@TheNewbieWoodworker 6 лет назад

👍

@walleyeye 5 лет назад

Thats a nice build. If there was a “WOW” button i’d punch it!!!

@TheNewbieWoodworker 5 лет назад

Thanks! I appreciate it! 😄

@rickstewart2247 6 лет назад

Great router lift. Yes, please post a build video.

@TheNewbieWoodworker 6 лет назад

👍

@johnnypantages250 6 лет назад

yes yes yes. build video please

@TheNewbieWoodworker 6 лет назад

👍

@mikeyeary6257 6 лет назад

I too would like to see a build video but if there are links to the sketchup drawings, and they have measurements, I could.probably figure it out. Good video as always!

@TheNewbieWoodworker 6 лет назад

There's a couple of tricks to getting everything aligned right, so maybe I need to do a build video.

@Andy-te6jj 6 лет назад

so than what you waiting for mate? go in your workshop and do it ;-)

@TheNewbieWoodworker 6 лет назад

LOL. I don't blame Mike for asking. Always get as much information as you can before attempting something. And, it never hurts to ask, right? 😛

@eauciel 4 года назад

The Newbie Woodworker Hi Dan, enjoyed the video as usual! Your worldview shines through. Curious about dust collection. Why pull dust from top to bottom? Doesn’t the router motor assembly get clogged? What prevents the hole at the top from working? When you tried the hole at the top:- Did you have a path for clean air to come up from the the bottom and carry the dust into the collector? Keep up the good work!

@b767greg 5 лет назад

Great design! I am researching linear motors for another project and this would be the perfect project for a linear motor. Install it under your lift with a 12v power supply and a switch and you could eliminate the lever. These motors are cheap on eBay. Something to consider to enhance your lift. Count me in for a build video! Nice work and I like your videos!

@TheNewbieWoodworker 5 лет назад

Thanks! Build video is coming soon. 😄

@antoniosebastian7672 5 лет назад

Absolute Genius, This is the best solution and Design I've ever Seen. Keep up the great work Dan!

@TheNewbieWoodworker 5 лет назад

Thank you! I've just started work on the build video. We'll see how long it takes. 🙄

@matthewpotter1933 6 лет назад

That is terribly clever!

@TheNewbieWoodworker 6 лет назад

Thanks!

@paulreed2054 4 года назад

Nice job kept simple this is a real winner with me few moving parts to jam up thumbs up from me

@TheNewbieWoodworker 4 года назад

Thanks! I appreciate it! 😄

@johnflatt6822 5 лет назад

Great video. A build video would be helpful. The guide system is a great use of existing and readily available products. I think this will continue to evolve and become even more user friendly.

@TheNewbieWoodworker 5 лет назад

Thanks! I'll be starting on the build video soon. And yes, I think the use of miter tracks and UHMW plastic rails is something everyone who designs a router lift should consider. Very secure and reliable.

@kevinroyer1264 6 лет назад

I would enjoy that build video

@TheNewbieWoodworker 6 лет назад

👍

@tomas5376 6 лет назад

Waiting for build video.👍

@TheNewbieWoodworker 6 лет назад

👍

@jaykepley5238 6 лет назад

Very clever. Nicely done.

@TheNewbieWoodworker 6 лет назад

👍

@vksubra1953 6 лет назад

Thank you. You have definitely whet my appetite for more. Please put out a build video too. As always, a great video

@TheNewbieWoodworker 6 лет назад

👍

@whothefuckami55 3 года назад

Great video, would love to see the build video

@TheNewbieWoodworker 3 года назад

Thanks, and here it is: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LJqPDADi8MM.html.

@mixedmartialmayhem7703 4 года назад

I’d like to see a build video if you haven’t done one yet. You’ve done a great job mate! Definitely going to try this one out.

@TheNewbieWoodworker 4 года назад

I have: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LJqPDADi8MM.html

@sapelesteve 6 лет назад

Without a doubt one of the easiest to operate router lifts that I have seen on YT, so kudos to you! Yes, I would love to see the build. Also, I don't think that it would take much to incorporate a micro-adjustment knob which I feel would come in very handy........... :)

@TheNewbieWoodworker 6 лет назад

Thanks! Go for it - let me know how it works! 😄

@lisaalbrecht7900 6 лет назад

Wonderful! Please do a build video!!!

@TheNewbieWoodworker 6 лет назад

👍

@carlmarsteller8649 6 лет назад

love to see the build

@TheNewbieWoodworker 6 лет назад

👍

@billbyrd9845 5 лет назад

Sorry if this has already been mentioned. I worry that a spiral bit on just the right project might screw itself through the workpiece and into your hand if you don't have a top stop for the lever. As to the use of a lever as opposed to some screw arrangement-- I like it. It's actually better because it's faster and just as precise. Good on you.

@TheNewbieWoodworker 5 лет назад

Thanks! Unless you're using a very lightweight router, I don't see much of a chance of this happening. Most routers are VERY heavy.

@SyMaster1 5 лет назад

I found your channel when searching for DIY router tables using a Ryobi plunge router and saw you have the same router.

@TheNewbieWoodworker 5 лет назад

Cool! I'm working on the build video for the lift right now. 😄

@frankthornal9489 6 лет назад

I think you have reinvented the wheel. Very nice and inexpensive. I would very much like to see a build video.

@TheNewbieWoodworker 6 лет назад

👍

@Drowe1956 6 лет назад

Yes build video please

@TheNewbieWoodworker 6 лет назад

👍

@TetraCNC 6 лет назад

Nice job here's to the start of your second Million views.... I would love to see a build video, but I think I would love it even more to see your mistakes and how you overcame/fixed them. This is the Newbie Channel after all and what better way to learn than from mistakes. Keep up the good work.

@TheNewbieWoodworker 6 лет назад

Thanks! I actually have a "virtual" sticky to remind be to do a video on mistakes/problems, and how I overcome them. So I'll definitely do at least one, in the future. And when I finally release the drill press table video, it's got multiple places where I made mistakes and show how to fix them. So, good idea, and thanks again!

@greghalford2617 5 лет назад

Good and simple

@TheNewbieWoodworker 5 лет назад

Thanks! 😄

@rbleda 2 года назад

Hi Newbie Woodworker, I love watching all of your videos. You explain everything so well. I can’t wait to watch you make this video from scratch. I am just a little confused about the raising arm and the ball bearing and how the 2 can raise the router so high. Another great video!!

@TheNewbieWoodworker 2 года назад

Thanks! 🙂

@johndenton42 4 года назад

Incredible and very well executed! Love the lever idea to allow for micro adjustments

@TheNewbieWoodworker 4 года назад

Thanks! I appreciate it! 😄

@SKTWoodDesign 5 лет назад

Would Like a build video for this too. Great job!

@TheNewbieWoodworker 5 лет назад

Thanks! And your wish has been granted: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LJqPDADi8MM.html 😄

@shaunwhiteley3544 6 лет назад

Excellent! Build video please 😀

@TheNewbieWoodworker 6 лет назад

👍

@Bill.L.Carroll 6 лет назад

Great design there, mate👍 Brilliant idea with the dust draw👌 I won't say no to a build video😋

@TheNewbieWoodworker 6 лет назад

Thanks!

@aleksamaker8118 6 лет назад

Yes do a build video

@TheNewbieWoodworker 6 лет назад

👍

@billbennett8447 6 лет назад

I definitely would like to see the build video. Enjoy watching your build, and tips videos.

@TheNewbieWoodworker 6 лет назад

Thanks!

@shortbuspimp 6 лет назад

I'd love to see a build video.

@TheNewbieWoodworker 6 лет назад

👍

@bobnicholas5994 5 лет назад

Dan you are mind blowing precise. I felt good about figuring out how to cut a tile to carpet transition piece...lol.

@TheNewbieWoodworker 5 лет назад

Thanks, Bob. But I'll bet you did a better job at that than I would. Those are the kinds of things I'm terrible at. Boxes with square joints, and vague dimensions? That I can handle. Cutting tile to specific dimensions? Only if I could waste one for every one I laid. 😛

@bobnicholas5994 5 лет назад

@@TheNewbieWoodworker dont tell anyone but my wife is a mechanical engineer. Shes the gile person. I'm the wood transition piece guy. I made my first 15 degree cut and hours of deciding rabbit bit or tablesaw..lol

@TheNewbieWoodworker 5 лет назад

@@bobnicholas5994 That's so cool! My wife is way smarter than me in some things, and I don't mind admitting it. BTW, I assume you meant she's the "tile" person, and not "gile", or better yet "guile". 😛 As for taking hours deciding which to do, I am *so* right there with you. That's exactly what I do, and in fact, I just realized this morning that it's a benefit (at least for me). If I give myself enough time to think about how to do something, sometimes even days, eventually I latch onto something I never would have thought of before. My mind is like an old Intel 286 processor, and it just takes a while to get there. Oh, and regarding me being precise, it's because I made every single one of the errors I caution about. Who knew that my inability to do things right the first, second, or third time would turn into something useful? Seriously!

@bobnicholas5994 5 лет назад

@@TheNewbieWoodworker I obviously love you tube and I have found my favorite contributors are people who show or discuss mistakes they've made. I have been making elaborate picture frames and I thought I was the only one who couldn't get a corner matched up..

@TheNewbieWoodworker 5 лет назад

@@bobnicholas5994 Yeah, isn't it interesting that some people make it look like they never make a mistake? I don't know whether it's intentional or not, but the more I get a look "behind the scenes", the more I realize that some of these things *are* hard, but we figure they make it look so easy, it must just be us who's lacking, and we start devaluing our abilities. If I can ever figure out how to word this, I'll certainly blog about it, and if I can figure out how to shoot it, I'll do a video. We're doing things most people either can't or don't. That's pretty awesome, if you think about it. (Pardon my rambling, but I want to get this out while I'm thinking about it.) Why do you think there's so many jigs and specialty tools on the market? Because there's things that are hard for a lot of people - hard enough that they'll buy a tool for it. Anyway, enough rambling. 🙄😄

@okieinva1 6 лет назад

You might consider magnet cups, if you have the room they can help increase the holding power, Nice video too!

@TheNewbieWoodworker 6 лет назад

Thanks!

@nyc11420 6 лет назад

Yes please on the build video. Thanks for your efforts, your videos are great! Jim C

@TheNewbieWoodworker 6 лет назад

👍

@fahermsen 6 лет назад

It looks nice a build video would be nice too. Just because i like these kind of videos. However there are many kinds of plunge routers so it differences in sizes. I wil wait and see.

@TheNewbieWoodworker 6 лет назад

Thanks, and very true. I'll point out the things to look for in your router, to see if it'll work in this solution. Also, you decide the dimensions of the lift based on your own router, so size is less of an issue.

@a-gogo5275 5 лет назад

Definitely add a build video! Great job on this video.

@TheNewbieWoodworker 5 лет назад

Working on it. 😄 Thanks!

@David-ew9rg 6 лет назад

Nice lift. Would appreciate seeing the build to this. Thanks

@TheNewbieWoodworker 6 лет назад

👍

@ricksteele1343 6 лет назад

I would like a build video. You built a terrific router lift. I may even be able to make one from your video

@TheNewbieWoodworker 6 лет назад

👍

@stephandallons3282 5 лет назад

Pure genius ! I also would like to watch a build video of your plunge router lift.

@TheNewbieWoodworker 5 лет назад

Thanks! I'm working on the plans and video right now. 😄

@ctenos45069 6 лет назад

Would enjoy seeing the build video. Nice video, as always.

@TheNewbieWoodworker 6 лет назад

👍

@saindon3 5 лет назад

Dan, I love the router lift and I would love to see a build video.

@TheNewbieWoodworker 5 лет назад

Well then, you're in luck! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LJqPDADi8MM.html. 😄

@Shopwolfe 6 лет назад

nice! Seems simpler than the Jay bates lift I built. Build video would be cool.

@TheNewbieWoodworker 6 лет назад

👍

@jlmpenedo 6 лет назад

I would like to see The assembly of the lift. Very clever ideia. Congrats

@TheNewbieWoodworker 6 лет назад

👍

@tworailsrails1821 6 лет назад

+1 for a build video on this cool project.

@TheNewbieWoodworker 6 лет назад

👍

@gderflinger 6 лет назад

Hi Dan, gr8 idea thx for sharing. A construction video is highly appreciated.

@TheNewbieWoodworker 6 лет назад

👍

@NickDV007 6 лет назад

Great build 👍👍👍 It's made me rethink the way I build mine 🤔 A build video would be useful 👍

@TheNewbieWoodworker 6 лет назад

👍

@barryroberts6470 6 лет назад

What a brillo build and a thumbs up from me for a video build as well. Barry (ENG)

@TheNewbieWoodworker 6 лет назад

Thanks Barry! "brillo" must be a British word, although it's fairly obvious what it means. But it makes me think of "Brillo Pads", and my voice has been scratchy lately like I swallowed one! 😛

@barryroberts6470 6 лет назад

Ha ha ha does remind me as well of brillo pads, but you are right brillo is just short for brilliant, which is what this build is so well done, and good luck with the throat. Try gargling with salt water, but don't swallow it as you will end up with your head down the loo, or you could just gargle with some mouth wash, take care. Barry (ENG)

@TheNewbieWoodworker 6 лет назад

Thanks, that's a good idea. No, wait, that's brillo! I'll have to try it. 😛

@rchavez5056 6 лет назад

Great job. Simple and effective.

@TheNewbieWoodworker 6 лет назад

Thanks!

@capn10gene 6 лет назад

rchavez 505 I get SDK error when I try to download this. The error window message says it is not an SDK file. I’m trying to download it on my iPad. Thanks for all the very informative videos that you provide. I like being able to download them on SketchUp warehouse

@rchavez5056 6 лет назад

Gene Augustin I think that was meant for The Newbie Woodworker

@TheNewbieWoodworker 6 лет назад

Thanks. I don't know what an SDK file is. It should be a ".skp" file.

@mertothe1st.258 5 лет назад

I'd like to see a build video, I really like how simple and effective this lift is 👍👍👍👍👍👍👍

@TheNewbieWoodworker 5 лет назад

Well then, you're in luck! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LJqPDADi8MM.html

@spicyhot1695 6 лет назад

Great job!

@TheNewbieWoodworker 6 лет назад

Thanks!

@chadwilderdyke1275 6 лет назад

Great video and I would love to see a build video. I have been thinking of making a router table and a lift to replace my old Ryobi table with something more custom. I really like this design!

@TheNewbieWoodworker 6 лет назад

Awesome!

@monty3862able 6 лет назад

I would love to see a build video

@TheNewbieWoodworker 6 лет назад

👍

@gkalman20 6 лет назад

Great idea, I would love to see a build video.

@TheNewbieWoodworker 6 лет назад

👍

@randallparker8477 6 лет назад

I would like to see your build video of both the lift and the table too!

@TheNewbieWoodworker 6 лет назад

Thanks, but I doubt I'll do a build video of the table. It's construction is fairly ugly. However, there *is* a SketchUp model.

@bzzsimon2601 6 лет назад

Great job. I would love to see a build video on your system. Also, great dust collection solution.

@TheNewbieWoodworker 6 лет назад

Thanks!

@dannyyoung5542 5 лет назад

Love the build would like to see the build video! Thanks for this info tho

@TheNewbieWoodworker 5 лет назад

Thanks! Working on it right now. 😄

@EM1473 6 лет назад

Great job!!

@TheNewbieWoodworker 6 лет назад

Thanks!

@markspc1 5 лет назад

Great Idea !

@TheNewbieWoodworker 5 лет назад

Thanks! Here's the buld video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LJqPDADi8MM.html

@ecaff9515 5 лет назад

Excellent video and process. Thank you for sharing. I will start building my lifting system sasp...Thank you for sharing.

@TheNewbieWoodworker 5 лет назад

Awesome! And thanks. Still working on the build video and plans.

@vaio1806 5 лет назад

yees, build video please

@TheNewbieWoodworker 5 лет назад

Very close to done. 😄

@BookofIsaiah 6 лет назад

PLEASE make a build video, Dan!

@TheNewbieWoodworker 6 лет назад

👍

@larryg6102 6 лет назад

Awesome! Please consider making a build video for your subscribers. Thanks.

@TheNewbieWoodworker 6 лет назад

👍

@jurgenkemmerer7624 6 лет назад

Please post a video how you build the router lift. Thx.

@TheNewbieWoodworker 6 лет назад

👍

@bobcarlyon977 6 лет назад

A video on the build for the router lift would be cool.

@TheNewbieWoodworker 6 лет назад

👍

@armylangston1 6 лет назад

Great job. I would love to see your build video.

@TheNewbieWoodworker 6 лет назад

👍

@brucebeal5104 6 лет назад

I would love to see the build video

@TheNewbieWoodworker 6 лет назад

👍

Далее

Build: Router Lift with Lever & Mini Router Table, for Plunge & Fixed Routers

41:40

Build: Router Lift with Lever & Mini Router Table, for Plunge & Fixed Routers

Просмотров 185 тыс.

£30 plunge router plate a lift solution

15:58

£30 plunge router plate a lift solution

Просмотров 51 тыс.

Скинул на нее свой товар 😱 #красныебутоны

00:38

Скинул на нее свой товар 😱 #красныебутоны

Просмотров 15 тыс.

Я прожил 100 Дней ЗА СОБАКУ СТРИМЕРА в Майнкрафт…

40:52

Я прожил 100 Дней ЗА СОБАКУ СТРИМЕРА в Майнкрафт…

Просмотров 307 тыс.

Тачка для ГОНКИ с Ильдаром АВТО-ПОДБОР | КАК ОНА ПОЕДЕТ???

1:13:47

Тачка для ГОНКИ с Ильдаром АВТО-ПОДБОР | КАК ОНА ПОЕДЕТ???

Просмотров 1,4 млн

Люблю детей 💕💕💕🥰 #aminkavitaminka #aminokka #miminka #дети

00:24

Люблю детей 💕💕💕🥰 #aminkavitaminka #aminokka #miminka #дети

Просмотров 663 тыс.

🟢 Router Table Insert Plate and Router Lift Build - DIY - Part 1

15:01

🟢 Router Table Insert Plate and Router Lift Build - DIY - Part 1

Просмотров 3,5 млн

Ultimate DIY Router Lift - It's ELECTRIC! And Budget Friendly!

15:16

Ultimate DIY Router Lift - It's ELECTRIC! And Budget Friendly!

Просмотров 41 тыс.

Bowden Router Lift Build

10:53

Bowden Router Lift Build

Просмотров 86 тыс.

DIY Router Height Adjustment Conversion

10:28

DIY Router Height Adjustment Conversion

Просмотров 99 тыс.

Router Table Lift for Micro Adjustment - DIY Install

15:51

Router Table Lift for Micro Adjustment - DIY Install

Просмотров 72 тыс.

Plunge Base Router to Router Lift with the Router Raizer

15:13

Plunge Base Router to Router Lift with the Router Raizer

Просмотров 336 тыс.

Router Basics - A Beginners Guide to using the Router

17:27

Router Basics - A Beginners Guide to using the Router

Просмотров 259 тыс.

Homemade A Router Table Lift Quick and Easy || DIY Router Table

12:58

Homemade A Router Table Lift Quick and Easy || DIY Router Table

Просмотров 7 тыс.

Build a lift table router yourself, for the Bosch POF 1200 and almost all routers!

19:10

Build a lift table router yourself, for the Bosch POF 1200 and almost all routers!

Просмотров 191 тыс.

Simple Precision Router Lift Table

20:22

Simple Precision Router Lift Table

Просмотров 63 тыс.

Скинул на нее свой товар 😱 #красныебутоны

00:38

Скинул на нее свой товар 😱 #красныебутоны

Просмотров 15 тыс.