Genesis / Mega drive 6 button controller to Arcade Stick Joystick Sanwa Bao Long (best clone) switches BaoLian Layout: www.slagcoin.c... Streets of Rage cover/sticker: mega.nz/file/E...
Great Video! A squeegee is a great tool to apply your graphics and protective sheet. Also you can roll up a hand towel and use that as it lays pressure more evenly than your hand and helps against bubbles. I cover mine with feldt.
Quite curious, where do you sauter(think that’s how you spell that) the ground wires on the joystick part? I have everything I need to make this, just want to make sure I do it right, thanks mate
Hi should have bought a joystick with the individual direction connections, not of 5 pins. Looking at the PCB, I saw that all the steering ground were the same track. You can see it by pausing the video here 9:10. Thank you.
I tried this several years ago for a arcade project but the saga encoder chip on the paddles kept burning out not to long after when being modded to this platform i'v been doing this mod for the nes paddles to arcade games for years but have never been successful with the Sega paddles in doing so curious to know if you have experience the same problem
Me voy a poner con el tengo bastantes dudas en cuanto a donde soldar los cables, como sabes donde va el de tierra y el de acción tanto en la cruceta como en los botones?? Aviso de antemano que soy manitas pero poco puesto en electricidad y circuitos. Muchas gracias