No video :(

DIY simpel Pocket Hole Jig from scrap wood under $1 cost

Подписаться 162 тыс.

Просмотров 119 тыс.

50% 1

#plywoodworking #pockethole #bestdiytools
If you like The video Please Subscribe and share this channel!!
DONT FORGET join on Plywoodworking Tips & Trick Group on FB !!
easy for download FREEPLAN
Follow Plywoodworking
/ 479435482886643
/ plywoodworking
The easiest way to make a pocket hole jig, i using scrap wood for make pocket hole. You won't have to spend money to other expensive products doing same works. Very low price, easy to make and perfect to work. build this only need under $1 cost
hope this video can give inspired
Subscribe and leave comment on bottom if there is any question or less obvious please leave it in comment field.
Hope you like it and don't forget to like, share and SUBSCRIBE...
Thanks
---------------------------------------------------------------------------------------------------------
Song: "Sappheiros - Embrace [Chill]" is under a Creative Commons license (CC BY 3.0)
Music promoted by BreakingCopyright: bit.ly/Sappheir...
--------------------------------------------------------------------------------------------------

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 120

@kratingdieng 5 лет назад

Wah pas nih.. kapan hari abis nyimak punya JSK-koubou, sekarang nongol yang versi Indonesia.. komplit dah referensi saya buat bikin pocket hole jig murah meriah. Sama2 istimewa! Makasih bro udah kembali berbagi...

@plywoodworking 5 лет назад

Siap sama2 mas, bnr bgt video ini jga dri bbrpa video yg udh ada, modelya mirip pya jsk coz cb bbrpa plng bagus hasilya pya ini cm dia pake potongan kayu dilem tanpa dibor krng kuat, mkya dirubah bbrpa am cri bahan yg murah2 kyk pya G- atuntas. Akhirya jdi versi plywoodworking sndiri hehehe

@kratingdieng 5 лет назад

@@plywoodworking Wah.. berarti sdh melalui proses research & development yang ketat nih... hihihi. Jadilah versi plywoodworking, yg mudah dipraktekin.

@plywoodworking 5 лет назад

Hehe iya kurang lbh kyk gitu mas, smua hasil banyak ide digabung jdi versi sndiri akhirya wlpun sdkit mirip tp pasti ada bedha hehehe

@arshia1961 4 года назад

First video with all full details and dimensions, not like other keeping secret about details.. thanks you for great video

@plywoodworking 4 года назад

your welcome hope can give inspired

@ErosStein 4 года назад

It gave me chills to see you use the table saw... Use a push stick! You're going to lose your fingers, dude. Awesome work, BTW :)

@plywoodworking 4 года назад

Thank you, now use diy fence push block for safety use table saw.

@ErosStein 4 года назад

@@plywoodworking awesome, now I can sleep tonight :D one more time, congrats on your work! It looks great!

@plywoodworking 4 года назад

@@ErosStein thank you !!

@rixarvox 4 года назад

thank you very much, it's a nice jig

@plywoodworking 4 года назад

Glad you like it!

@bplus9z 4 года назад

great job on the jig. i got a kick out of the hose and bag to collect wood shavings!

@plywoodworking 4 года назад

That is awesome!

@muhammadyasin-hb3nj 5 лет назад

Bukan berapa banyak alat yang kita punya untuk membuat suatu karya, Tapi berapa banyak karya yg kita buat dengan alat dan bahan yg seadanya, Khususnya buat saya yang low budget om hahhaha, 😅 oh iya makasih udah upload om.

@plywoodworking 5 лет назад

siap sama2 semoga bermanfaat

@asarijunaedi3870 3 года назад

mantab simple,,menggunakan lem kayu DN

@plywoodworking 3 года назад

thank you very much 👍👍💕

@jimmyalex296 5 лет назад

Mantap.....terima kasih telah berbagi idenya bos 🤗👍👍👍

@plywoodworking 5 лет назад

Siap sama2 smoga bermanfaat

@christofix 5 лет назад

Great build. I love to use pocket holes in my projects too. They make a strong connection!

@plywoodworking 5 лет назад

thank you

@edinsonsierra243 5 лет назад

Maestro sus trabajos son verdaderas obras de arte,pero se sufre mucho verlo trabajar con las manos tan Serca de los discos de corte de las máquinas. Sus manos fueron tocadas por Dios para crear obras de arte,por eso debería cuidarlas un poco más espero q lo tome como una crítica constructiva ya q UD es digno de imitar,un abrazo desde Colombia

@plywoodworking 5 лет назад

thank you so much that my honor for me, hope this video can give isnpired!!

@mamiqajiesakina6071 5 лет назад

Wah keren ne. Ini yg dimaksud pocket hole yg ada lubang angin ya...👍👍👍

@plywoodworking 5 лет назад

Iya bnr bgt pak, br awet mata bor am pocket holeya ngebor lebih ringan

@mamiqajiesakina6071 5 лет назад

@@plywoodworking btw itu kompresor listrik ya?kalo yg lakoni 75 itu maksimal ga untuk ngecat?

@plywoodworking 5 лет назад

iya klo ini pake lakoni fresco yg oiless kuat klo yg iin, bs ttp maximal yg lakoni 75 cm karena tabungya kecil sering isi angin, pas posisi isi angin kdng semburanya krn kenceng

@SuperAnimal1970 4 года назад

Great details, easy manufacture, Thank you (watch your fingers).

@plywoodworking 4 года назад

Glad you like them!

@marksatterfield3100 4 года назад

Nice to see someone make a nice piece without Festools and Powermatics everywhere,

@plywoodworking 4 года назад

Glad you like it!

@adoneran 3 года назад

That coke nail tho

@plywoodworking 3 года назад

thank you

@user-co6js9we6o 4 года назад

Super!!! ( ШЕМКИР ДЗЕГАМ) 🎲🎲🎲

@plywoodworking 4 года назад

thank you very much

@legaians1 3 года назад

Hebat

@plywoodworking 3 года назад

thank you very much 👍👍💕

@IEnjoyCreatingVideos 5 лет назад

Nice job on the pocket hole jig Friend! Thank you for sharing the video with us.👌👍😎JP

@plywoodworking 5 лет назад

your welcome my friend, hope can give inspired!

@IEnjoyCreatingVideos 5 лет назад

@@plywoodworking 😎

@norik122 5 лет назад

Очень здорово сделал, такую вещь приятно в руки взять!

@plywoodworking 5 лет назад

thank you

@Lethandstry 4 года назад

Very good working!

@plywoodworking 4 года назад

Thank you! Cheers!

@ammrbarbarossa2230 5 лет назад

Mantap gan... Kreatif dan menginspirasi. Klo dipasaran harganya mahal2, utk barang kecil bgtu haha Oiya itu pake kayu ulin gan?

@plywoodworking 5 лет назад

Makasih banyak mas udh mampir, iya mahal emg klo beli ini cm abis 10rb bahany aj hehehe, itu pke kayu limbah sonokeling

@ammrbarbarossa2230 5 лет назад

Mantap emang ni salah 1 channel lokal, semoga terus bisa update video2 kreatif dan inspiratif gan. Oiya gan itu miter saw merknya apa?

@plywoodworking 5 лет назад

@@ammrbarbarossa2230 amin2 makasih banyak suportya am chanel kecil ini, itumerek NRT seri pertama tp udh sy modif mas jdi enak bgt am presisi dibandingkan waktu awal beli, low budget tp presisi heheh

@ammrbarbarossa2230 5 лет назад

Kapan2 boleh dong gan upload tutorial cara setting miter sawnya dan alat2 potong lainnya biar presisi hehe

@kaderrousselle 2 года назад

ce n est plus un outil c est un bijou

@plywoodworking 2 года назад

Thank you very much!👍😊👍

@anawheaa 4 года назад

Thanks. its clear now I make same

@plywoodworking 4 года назад

👍👍

@markkoons7488 4 года назад

As an old guy who's etched cast iron with his own blood a couple of times, it makes me weak in the knees to see you sawing small bits on a table saw without using push sticks.

@plywoodworking 4 года назад

thank you for remind me, i dont have jig for cut that, that what i use my hand, i will make jig for safety work.

@dolly280156 4 года назад

I was so scared for you. Your fingers are too close to your saws etc.

@arniscustom9234 5 лет назад

Mantap mas bro...

@plywoodworking 5 лет назад

Bs mas tp blm produksi coz ini cm disiapin buat tutorial aj

@ekanurfebriani2728 5 лет назад

Nice

@plywoodworking 4 года назад

sip

@alissongisleno7982 5 лет назад

Meu caro, admiro muito seu talento e o desejo sincero de compartilhar os seus projetos. Parabéns pelo desempenho.

@plywoodworking 5 лет назад

thank you hope can give inspired!

@jimpike3489 4 года назад

Another great video, I will make one of these, saves paying $100. Thanks for sharing

@plywoodworking 4 года назад

thank you very much

@jerichojoe307 3 года назад

$100????!!!Where the hell do you live that a pocket hole jig costs $100?? Maybe for a full setup with hold down, clamp, bits, and accessories. But just a jig? Lol. Here's a link to a cheap 3 hole jig. www.amazon.com/Woodworking-Drilling-Positioning-Carpentry-Adjustable/dp/B08DQS43WV/ref=mp_s_a_1_17?dchild=1&keywords=3+hole+pocket+hole+jig&qid=1604464547&sr=8-17 You're welcome. I'm just here cause I like DIY stuff and wooden tools for my shop, but Amazon is wonderful for the ones here to save money. Remember it takes tools to make tools and if you can afford the tools to DIY a tool, just buy the damn tool. If a pocket hole jig is to expensive, maybe woodworking is not for you.

@wagnerhenriquedeoliveira2921 4 года назад

Perfeito, muito bom Agora conseguiria enviar algumas peças para mim no Brasil

@plywoodworking 4 года назад

thank you very much!!!

@soarebv Год назад

👍👍

@plywoodworking Год назад

thank you very much 👌😊👍

@gtbmcollins1 Год назад

I have your link to the plans but I didn’t notice this one in there, can you send me the link to this plan?

@sitgesvillaapartmentneilsc7924 4 года назад

A little piece of Art 5 *

@plywoodworking 4 года назад

thank you

@romual90 4 года назад

Kalau tebal papan berbeda2 gmn bang ngukurnya? Kadang lubang pocketnya jadi ga pas terlalu ke pinggir, atau terlalu ke tengah

@plywoodworking 4 года назад

Klo pake ini manual dikira2 klo yg bs tau pake yg ada jig dudukya videoya ada jga kok lbh praktis

@anawheaa 4 года назад

Hi this is a very nice job but there is something I did not understand which is in the second piece size 65 × 60 Is the hole in 65 mm side? I was confused because in the image of the 3Dmax the hole was not in the side of the 60 mm, if in the side of 65 mm will not match the first piece with the second piece in the end ....... Please explain to me what confused me

@plywoodworking 4 года назад

my mistake i think measure in 3d that 65 mm not 60 mm, the real size width 60 and lengt 60 for wood and cut 45 degree on edge. i wrong give size on 3d animation

@fredikenzie2156 3 года назад

Jiplak JSK koubu. 😀

@plywoodworking 3 года назад

Bedha mas jsk pake kayu potongan, jsk pun jiplak jga asliya ada yg buat dluan😆

@Kunfucious577 4 года назад

That's so much harder than you make it look.

@plywoodworking 4 года назад

i sure you can make this too

@hasmukhvpatel4539 4 года назад

this is Rocket science .too long.but good.

@plywoodworking 4 года назад

thank you very much

@masbrois7491 4 года назад

Mas you pake kayu apa yg warnanya coklat?

@plywoodworking 4 года назад

Sonokeling / rosewood

@alcidespaulinoporto3521 5 лет назад

Você fábrica para vender?

@plywoodworking 5 лет назад

This is only prototype but great idea maybe i can sell this😊

@whyz63 4 года назад

Danger work procedure

@plywoodworking 4 года назад

Really!!

@GudangKanvasMedan 5 лет назад

Mas bikin animasi nya pake apk ap?

@plywoodworking 5 лет назад

pake sofware 3d Max

@XxxMrGigglezxxx 5 лет назад

Good luck keeping all your fingers. Cant do it safe dont do it..

@plywoodworking 5 лет назад

thank you for remind me, i have bad experince on 9 years ago i cut edge mmy finger wirh circular saw coz that now i more carefully use all power tools. Safety first

@deddymulyaman8890 4 года назад

Fungsi magnet tuk apa yaa???

@plywoodworking 4 года назад

Untuk ap ya 😁, br gampang klo pake clamp catok lbh cpt kerjaya, pocket hole nempel di clampyaya

@11111972cjb 4 года назад

Why......do......you.......use.......automated.........voice........?

@plywoodworking 4 года назад

Why that wrong

@josephlee1266 2 года назад

ㄷ

@plywoodworking 2 года назад

Thank you very much, hope can give inspired

@hashfihazazi3631 5 лет назад

mas,saya mau mesen bisa?

@plywoodworking 4 года назад

thank you very much

@ozzyozzy6728 4 года назад

Unnecessary steps

@plywoodworking 4 года назад

thank you

@malcolmhodgson7540 2 года назад

Really is a wonder you still have fingers! So many bad practices. It’s only time before you need to visit a hospital with a bag full of fingers. What is more you are teaching others unsafe practices. Not cool. Clamps, feather boards and push sticks were invented for a reason.

@plywoodworking 2 года назад

Yes you right, i really sorry about that. I made this video 2 years ago, now i work more safety

@malcolmhodgson7540 2 года назад

Thats good. Really glad to hear it. Take care my friend.