DIY Simple Roller Bender - Homemade Metal Bender 

Thank you for the compliment! I'm glad you found the DIY video helpful with its clear measurements. If you have any specific questions about the video or need further assistance, feel free to ask!

Thank you very much! I'm glad you found the DIY video helpful with its clear measurements. Best wishes to you.

You are welcome!

Congratulations

Wow, thanks!

Thanks

Thank you so much. Շնորհակալություն!!👍✅️

Спасибо 👍 ✅️

Я тоже себе такое сделаю и вам спасибо.

@@user-gv3gp4js6c желаю вам удачи во всем!👊🫡👍

спасибо вам 👍👍✅✅

Thank you

Hello, this piston suits the cars below. But in order not to make a mistake, you can first buy 6301rs bearings and go to an auto parts store and check on the spot which Brake Caliper Piston is ideal Below is a list of cars on which this Brake Caliper Piston is used APPLICABILITY AUDI 100 C3 Sedan (443, 444) 82-91; AUDI 100 S3 Avant (445, 446) 82-90; AUDI 80 B4 Avant (8S5) 91-96; AUDI 80 B4 sedan (8C2) 91-94; AUDI 90 B3 (893, 894, 8A2) 87-91; CITROEN C5 III (RD_) 08-14; CITROEN C5 III Brake (RW_) 08-14; CITROEN C6 (TD_) 05-12; CITROEN C8 (EA_, EB_) 02-; Bus CITROEN JUMPER/RELAY (230P) 94-02; CITROEN JUMPER/RELAY Platform/Chassis (230) 94-02; CITROEN JUMPER/RELAY Van (230L) 94-02; CITROEN JUMPY/DISPATCH (VF7) 07-; CITROEN JUMPY/DISPETCH Van 07-; Bus FIAT SCUDO (270_, 272_) 07-; Platform/chassis FIAT SCUDO (270_, 272_) 07-; FIAT SCUDO Van (270_, 272_) 07-; FIAT ULYSSES (179_) 02-11; Bus OPEL VIVARO A (X83) 01-; OPEL VIVARO A Platform/chassis (X83) 01-; OPEL VIVARO A Van (X83) 01-; PEUGEOT 407 (6D_) 04-11; PEUGEOT 407 Coupe (6C_) 05-; PEUGEOT 407 SW (6E_) 04-10; PEUGEOT 607 (9D, 9U) 00-11; PEUGEOT 807 (EB_) 02-; Bus PEUGEOT BOXER (230P) 94-02; PEUGEOT BOXER Platform/Chassis (ZCT_) 94-02; Van PEUGEOT BOXER (230l) 94-02; PEUGEOT EXPERT Platform/chassis 07-; PEUGEOT EXPERT Tipi (VF3X_) 07-16; PEUGEOT EXPERT Van (VF3A_, VF3U_, VF3X_) 07-; RENAULT AVANTIME (DE0_) 01-03; RENAULT ESPACE III (JE0_) 96-02; Bus RENAULT TRAFIC II (JL) 01-; RENAULT TRAFIC II Platform/Chassis (EL) 01-; RENAULT TRAFIC II Van (Florida) 01-03; Van TOYOTA PROACE (MDX_) 13-16

Approximately 20cm, but maximum thickness 2.5mm

Can you make one to roll thicker?

Hi 👋

front brake caliper piston

Hello, thank you very much for your comment. the maximum diameter I made on this machine is 1 meter, but I think I can make bigger 😉

@@ArdoDIY thanks, I Will make one with you idea.

@gabrielbautistaalatorre5478 That sounds great! Wish you best of luck

I think this design will not withstand such a heavy load

You can make such a design if you have the capabilities and tools for this project.👇👇 facebook.com/share/v/UdnBBMyHNPrUkVtj/?mibextid=w8EBqM

Thank you so much

Hi 👋, outer diameter of the bearing 37mm. Here is a link for more information about this bearing koyo.jtekt.co.jp/en/products/detail/?pno=6301%202RS

@@ArdoDIY oh thank you bro!!

@xotakk Thank you too, and I wish you good luck with your project 👍✅️