DIY Stealth Bomber EBike COMPLETE Build Tutorial (How to) 

Nice! I'm liking everything you guys are putting out for content

I was looking for a Canadian place to order my parts!!! So glad you're an option!

This is amazing. I love the work you guys do and I love that you guys put in the extra effort for the customer your all amazing

Amazing content, as always!

Wow, that's a kickass looking bike!

Great Video! Thanks for being Open Source. When lining up the side panels I have use two long studs or bolts with the heads removed threaded in the frame, the side panel hangs on the long studs till the rest of the bolts are threaded in. Great Magnet ideal.

Great stuff :)

great video bro👍

It's a nice build, but by buying all those parts individually you will pay more than just ordering one off Alibaba, which I did ( and yes, HIGH-QUALITY). everything on this bike is almost the same except mine is a 95 mph (GPS) 15,000Kw 49Ah Samsung cells, 200amp Sabvatron controller, moto seat, KKE forks, and leather grips, all for $3300 to my door from (Domain electric bike company in China) bought in February and arrived May 12 only because it was a custom order.

Built a 12kw clone this last summer, wish I had your video at the time. Couldn't figure out a good setup for fenders until I saw your setup - pretty simple and effective. Either way I'm on 1300 miles and LOVING this bike. Appreciate the time you took to put this out, keep it up!

Step 10. It's very important to apply some lock tight on the screws. I use stronger than the blue one. When a screw pop out after hard breaking it damage or severe the motor cable. It happened to me 3 times on 2 of my bikes.

Thank you.❤

Dear friend! What is the name of the music that plays in your video?

You forgot to send me a free kit. Looks fun.

*Very nice video* for the seat it will cut circulation off to your balls, I modified mine, get longer bolts and put washers in between top 2 bolts to change angle of seat 1” usually and perfect, also you can put a enduro seat with some simple modifications if you need your balls lol but seriously it’s a great modification! The motor cable he spoke of is probably most over looked so great job, if that cable rubs on the rotor you’ll be buying a new rear hub motor! Bakes you may need to adjust few times or bleed air out, I bought a ebike hydraulic brake bleed kit! Great item to have. I got slightly over 5k miles on my bike in 1 yr so Im trying to help here I think this is a great video just to be clear. I would not use all that caulk it’s going to be extremely difficult to remove and you’ll actually get moisture if you leave bike inside air conditioned home then go ride in summer my experience and vise-versa from heat to cold, I never ride in rain and my bike is fine no caulk my sabvoton control is actually under the seat they sell a mount box that bolts underneath just fine, if you want keep battery from getting wet just don’t ride in rain or use very thin rubber gasket self adhesive 1/4” wide or trim smaller is ok. Again just trying to help guys! FYI riding on roadway cars will 100% pullout on you etc so be extremely vigilant and put set mirrors on it! Definitely mandatory if you want to live, I had a truck hit me a few days ago he didn’t have his blinker on was going straight thru intersection then abruptly turned right into me “while riding the shoulder of road” going 15 mph, I was watching and saw him start to turn so I was ok but you gotta pay attention 1000% and just a tip I use brush guards on all my bikes to protect my hands ( gloves of course) when this truck turned into me he hit my handlebars first and they kept me from losing control etc so something to consider, as a note I’ve rode motorcycle 45yrs so but what matters is really paying attention do not assume anything, last month a elderly lady ran a intersection jumped curb knocked down street signs and almost ran me over but I saw her, what I’m saying is pay attention guys don’t think it could never happen, if you ride long enough you’ll understand what I’m saying, and if you have kids don’t let them ever ride along a highway, again if you ride long enough you’ll see why I’m saying this, people just don’t pay attention they’re distracted on cell phones most of the time, one more thing but a set of led rechargeable blinking light, red rear/white front, be safe out there people.

can you change the size of the free wheel like people with surrons do to there sprocket for mid mount motors? will it do the same thing and change the top speed or acceleration depending on which way you wanna go?

Hello dear friends it looks like real mountains bike 😅😊

Nice video, tiny things like putting lock washers or regular washers on bolts. Getting proper size quality bolts also kinda must do, the chinese ones can snap, wear threads out or come loose. Maybe those could be made as a kit for upgraded bolts and nuts

We need a mid drive version of these bikes, those hub motors are not good offroad

do you think the breaks/suspension could safely handle about 300lbs?

I wish they were still available on the site :(

the kits say that tires aren't included, what size is the rim for both rear and front? do you use motorcycle tires? seems like a fun little project to make something to ride into work on.

Nice build. Didn't seem to have many threads on that rear axle nut?

If i get one of these im putting on street tires and clip on handlebars and have an insane supermoto.

Nice bild buddy, what a good video !! 72v 60ah right ? What about full trottle range vs pedal assist range ?

Very interesting video! But if possible I would recommend to install the motor so that the wire is facing down. Then the water will not go to the motor so easily.

What is the headset kit used in this video. Anyone have a link for it?

Nice bike bro. I just got the 8000W motor. It's cool ,but how is the 12 one?!??

Awesome video. Where can you get the front fender wedge screw?

I'm very new into this and, I'm used to hooking up car stereos and amplifiers but I was wondering, to extend the battery life could you put a battery capacitor like in the battery compartment just right in front of the battery and hook it up in a parallel sorry. Or is it just not compatible like that.

hi whats on my mind is a bike that i can take to work, detach battery for charing in an apartment, and breaks/suspension that can hold about 300lbs (id like to be able to take myself 150 and my partner 120 on short trips (3mi round trip), is there a bike that can do this? been looking at the radrunner 3 for this

Hello! ive had a problem wih mine where the light, horn, and urning signals dont work do you know what i can do to fix this issue?

Saludos Bro! Tu cuanto mides y cuanto mide toda la bicicleta ?

i really want one of these, there so expensive lol

Hey Bro! Será que se le puede adaptar otra silla para llevar pasajeros?

Hey brother looking at mounting the front fender but can’t seem to find anything like that wedge hole with the wing nut, any chance you know where I could get it? Or did you just fabricate it?

hello how much does this all cost roughly

Will there be a qs273 option later on?

How fast does it go looking at getting one from the link.

Some one please help me 😢I have motor or controller short circuit (sensor fault)

does it come with all the bolts and hardware like the spacers and washers ?

is there a peddle delete version available?

I'm sorry but why do you encapsulate the controller in epoxy? Wouldn't this make any potential future repairs impossible?

Hello. Would you be willing share the 3d file for the controller mount? I checked your site and the mount is not available for purchase

Is the chain and pedals necessary?

nice bike how much just for the frame? if possible

hello do you have "certificat of conformity " type approval 168/2013 CE

What's the name of this rear fender?

Where can I get the file for the controller mount bracket?

The frame joints don’t look like they will hold very well. I’ve purchased a 60v scooter off of alibaba for $1600 and the frame failed due to metal fatigue. I absolutely see this happening to this stealth bomber clone.

When you placed the front fender on what is the exact name of that wedge bolt you used I'm trying to search for it Please and thank you 🤘🏾 killer build can't wait for mine to come in the mail

yo how much for u to build one and send it tk me I would die for ine

good afternoon. I watched your video. you buy an electric bicycle. I really want you to put together in this video. how much is the price col for such a thing? . but I need a nominal 8000 watt or even 12000 watt ☝👍

Where do you get those screws

How longs your waiting list? Lol

hi i saw in ali express they sell a complete set of this is it legit tho?

Uses" Chinesium bolts". Uses a spacer on the brakes. Doesn't use longer bolts to secure the brakes disc. Locktite is no substitute for thread engagement. FAFO

Just buy a talaria xxx it’s like 500 bucks cheaper and faster

stealth bomber showed up at my local track I own a mx4,xxx, and pro ss when I gave it a try it was shit sorry I'd rather ride xxx over stealth bomber anyday anyone that rides dirt bikes will feel the same sorry.

wait there isnt a nut or bolt holding the fork into the neck?

do you ship to europe?