DIY Table Saw Fence New Design - Smooth, Strong, Precise 

This is absolutely the best most detailed home made fence I've ever seen. I'll be using this to upgrade my horrible one that came with my saw. Thanks!

VERY VERY well done and YES you should be happy with result! You are a very creative designer of tools and jigs and your camera and editing work is superb. I enjoy watching! Your entire DIY table saw project is amazing work! Thank you for your time and sharing your creativity with us! Peace be with you!

I made a similar one last year. I put my spirit level along the blade and scribed a fine line across the table in line with the blade to use as a reference datum. To do this you need a new blade that is absolutely true, I checked the blade with a dial gauge first. I also checked that the slot was in line with the blade with the dial gauge at the same time.

Ini channel go internasional loh....banyak yg komen dari luar negeri....Semoga terus berkarya ya mas...saya seneng lihat kontem2 dari anda....pengen ditiru semua....2 jempol utk anda mas...

Always love your works, very inspiring. Terima kasih sudah berbagi 👍

Fantastic work, dude! Nicely done! 😃 Stay safe there with your family! 🖖😊

Nice job. It looks like it came from a factor

Nice job. It looks like it came from a factory!!! 👍👍👍

Excelente!! Gracias!👏👏😉

Just a friendly tip. You don't square your fence with the blade, you square it to the miter slot. The blade can be out of square with the miter slot which is another issue all together. The miter slots are perfectly square with the table top. I'm not going to put down the build, it came out very nice and you should be happy with it. I would just make a few changes. But over all, it's good.

Istimewa Om, mudah2an bisa d praktekkan kapan2... 👍👍👍

Çok güzel ürünler yapıyorsunuz ellerinize sağlık

Well done, fantastic design 👍

Good job thanks I say hello from London and Colombia 👍👍🙏

Great, God Bless!

Brilliant work.

Listening my friend wood and wheels I’m happy whit the design I see other people making differently but this one just perfect I don’t like to go and pay 300 o400 pounds I say pounds because I’m from Colombia but I live in London go to Colombia see how people there make fence for table saws first the table is like wonky and the fence nothing like this one any way for me is very nice actually I started making my own on little different but very close thanks my friends good luck and goodbye 👍👍👍🙏

Very, very good!

Very nice job!!!

lovely job mate enjoy brother greetings from australia

The reason I want a new fence on my saw is so that I can easily move my fence to a presise and accurate position. Which means it has to have tape measure that I can trust and read.

Keep creative.. 👍

Hi love this build and planning on making this. I have a question though as I may be missing something. Why is there such a big gap where the angled steel sits 03:12? Wouldn't it be better to just be the thickness of the steel (3mm) so it sits in tight so there is no play at all?

Super cool 👍👍👍👍👍👍👍

i had to make one myself. the one that came with my saw had no track and before EVERY cut, i had to measure front and back to make sure it wasnt toed in or out (it would be, always).

Güzel çalışma👏

I'm really happy for you.

Nice job

hi! Did you have a link for your toggle clamp? I search a lot but I didn't find one wich close like yours! Thanks!

Good job sır. Please next project will be over Arm Dust Collection..

Hey there buddy, hope you and the family are good. I have a Dewalt contractor saw- model DW745 and want to install a longer fence on it. I've built the saw into my work surface /assembly table so I have more room for a bigger fence. Do you think a design like yours would work? I'm trying to figure out how to keep the end farthest from the front from flexing. Do you have any suggestions? Thanks for what you do!!

Nice Job.. Istimewa banget hasilnya.. Itu Nylon sheet yg Tipisnya ukuran brp mas ?

this is great! how's it held up since you built it? is there anything you'd do differently if you were building another one?

The screw used to square the fence to 90 degrees is going to wear a groove in your aluminum clad.

I wish you could tell where you get your tool and plastic wheels etc. but I do love watching your stuff

Herkezin ihtiyacı olan ürünler

This is the way brothers

Nice, but you need to build yourself a better push stick than the orange thing you are using. Make one that holds the stock flat so you keep positive control. I have seen a lot of near misses with the orange type.

Please let me know if the plate you glued on the surface is stainless steel or aluminum

Great work, but I noticed at 12:51 that your fence is not sliding perfectly straight to the blade, there was a non-straight movement at the top of the fence when you pushed toward the blade.

What do you call the clamp you use on the end ? Do you have a link for product purchase ?

nice to watch, but too complicated to Do It Myself

Pertama nemu chanel ini tak kira punya luar negri lho,dan fance gitu full nylon setelah sebelumnya top tablenya juga pikir full metal, oya nylon+ metal itu dpt dmna dan klo nyari d toped kata kuncinya apa??

what was the device you used to draw the straight line?

great project, thank you, where can I find the the lever you use to block the fence?

Hebat uy

I can't find The Free Plans for nothing. On Facebook I located Drive, but I didn't find any folder that had New Fence. Can you help me? Congratulations on the incredible project.

do you have a link for the circular saw guide you used in this video?

Papan hmr bisa merekah juga ya om. Padahal cuma kecipratan aer. Trus kalo d tempat lembab jadi jamuran,merekah juga,nambah 1-2mm.

It would be much better with subtitles instead with computer generated voice. Additionally - plesa make some introduction (what, why and how...).

Hello, i'm one of your followers and I really like what you do; may I have the reference of the clamp you used for this fence ? Thank you very much.

Where to download this plan guru?

👏👏👏👏👏👍👍😍😍

Hi how are you can I ask you what are you located sometime I see a lot of stuff you use I can't find it around here in the United States thanks you do a great job by the way

мастер брат

What is the size of the tongle clamp

bang, beli toggle clamp yg karet hitam besar ada linknya? saolx saya nemu atau dsni walau yg body besar, karetx ttp kecil

I can't find the plans for this on your drive.

Good design but I think you supost to clean the rust from the things you use to make this fence

Could you please tell me what HMR is in the UK it looks like mdf.

How do I get the plans ?

WHAT DID YOU USE FOR THE WHEEL AND WHERE DID YOU GET IT

On your exploded view you have a typo 940mm should it be 94mm ? good job pal

Mas, ada link utk bearing utk fence nya?

I have a question what is the name or type of clamp used for the fence?

CORRECT ME IF I'M WRONG BUT IN THE MEASUREMENTS YOU SHOW LENGTH OF 720MM AND ON THE SAME PIECE THE WIDTH IS 940MM BUT THE WIDTH IS FAR FAR SHORTER IN THE PICTURES,. LAST I CHECKED 940MM IS > THEN 720MM.

Алюминий не пачкает заготовки?

what is the glue that you use to bond alluminum?., also nylon sheet sir to your mdf?

What is the type of the bearing wheel? thanks so much

Where did you buy the wheels?

What is that marking gauge?

On your exploded view of the fence @ 4:35 mark... shouldn't the end piece be 67mm X 94mm? I don't think "940mm" is correct.

Where can I get the wheel bearings

Quanto custa uma dessa aí ? ???

⭐🙂👍

dua sisi kanan kiri yg warna putih bahan apa namanya mas...toko apa yg jual info mas

melayani pesanan fence gk gan?

18:16

13:32 itu Pe Board kak?

you may have possibly built the most expensive fence ever made, lol

I was really surprised how much cutting power (and torque) this saw had out of the box. I've used other (10" saws) previously and was pretty surprised with the speed and cutting ability of this Dewalt saw.I have bolted mine to a table to minimize movement which I highly recommend.This is a Great saw ru-vid.comUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe with a light to see your cutting line (not a laser line).I'd recommend this saw fro anyone looking to upgrade from a 10" miter saw.

Look ll

The use a an Ai voice, is super annoying.

What's with the poofy glove?