[DIY] The easy way to make hexagon knobs/ Making Star Knobs 

No problem~~ I'll show you how to make a sanding mob soon. Thanks for your suggestion.

Hello Richard~ The sanding mob production process video you requested has been completed. I would like you to watch the video below. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YWTrktri3KY.html

Thank you VERY much! The video is very detailed and easy to follow. :) One question and one suggestion.... Can you please tell me the diameter and length of the bolt used for the mob? It seems that the mop will wear out just on the perimeter of the sand paper. I suggest coming up with a way to "trim" the sand paper 5-10mm as the sand paper wears out. This way the mob can continue to be used until the diameter get close to the washer. Just a thought.

@@Richard-dh8ny The bolts used to make the mob are 150cm long and 1cm thick. And the big washer diameter is 5cm. That's a good suggestion. If you use it several times, the mob becomes like a perm head, which makes it more usable.

Has has he made a video on how to take off your finger tip on the router table?

Safety is the number one priority when it comes to woodworking. Thanks for your advice. As you said, my router work was risky. I'll have to find a safer way. Please continue to support us in the future.

Thank you so much^^

플라스틱 노브를 사용해도 괜찮지만 직접 만들면 비용도 아끼고 의미도 있을 것 같아요 ㅋㅋ 고맙습니다~~

That is my mistake. Thanks for your comment.

찾아 주셔서 고맙습니다.^^

Thank you so much^^ I hope you enjoying woodworking too.

고맙습니다, 같이 좋은 결과 만들어 보시지요~~~

Muchas gracias

I'm so happy^^

멋진 작업이죠 ㅋㅋ 고맙습니다~~~

Thank you very much for your support. Also, thanks for asking the question. If you would like the production process of the clamp shown at the beginning of the video, please watch the video below. youtu.be/watch?v=DqauurnPb-g&t=124s

좋은 응원 글 고맙습니다. 따뜻한 말씀에 힘이 절로 납니다.

Muy buen trabajo, delicado y preciso, felicitaciones...

@@franciscoolivares3703 Muchas gracias.

Thank you So much.

Muchas gracias ^^

Thank you for taking a good look at our work process. Your support is a great strength to me.

Thank you so much.

Thanks for your advice. In my case, I wanted to make it pretty by making the upper hole smaller. The lower insert nut insertion hole is too large. Please continue to support us in the future.

I'm so glad I was helpful to you. Thank you so much^^

노브는 소모품이라 계속 필요 해지잖아요ㅋㅋ 다음에는 직접 만들어 사용 해 보시지요♡

참으로 오랜만입니다. 잘계셨죠? 고맙습니다~~ 건강관리 잘하시구요.

Thank you so much~

Thanks for your advice. In the future, I will work according to your advice. Thank you very much.

Thanks for your comments. Thank you so much.

Muito obrigado.

Muchas gracias.

Thank you for looking at it beautifully.

Thank you so much.. Please try making it.

Thank you so much^^

Gracias por apoyarme. La madera utilizada para hacer el pomo es madera de nogal. La madera de nogal se utiliza a menudo para fabricar muebles de lujo. La madera de nogal es realmente hermosa. Thank you for supporting me. The wood used to make the knob is walnut wood. Walnut wood is often used to make luxury furniture. walnut wood Is really beautiful.

왜 자꾸 그러세요... 쉽다는 거 다 아시면서ㅋㅋ 고맙습니다~~~~

Thank you so much^^

muchas gracias.

I envy you for having a good laser cutter. But I am happy just being able to make a pretty knobs with my own hands. Thanks for your comments.

Thank you so much♡

Thank you so much♡♡

Thank you so much🧡🧡🧡

Thank you so much^^

Thank you so much^^

Thanks for your comments. Thank you so much.

Thank you so much^^

Thank you so much^^

좋게 봐주셔서 고맙습니다. 본드로 사용되는 에폭시입니다. 저는 이 제품을 사용하고 있습니다. itempage3.auction.co.kr/DetailView.aspx?ItemNo=A093021260&frm3=V2

Dust collection was difficult at the time of knob production. Now I have a nice dust collector on my drill press. Please watch the video below~~ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TBrVOOwF3wE.html Thank you so much.

That is my mistake. Thanks for your comment.

Are you referring to the woodcarving workbench full of holes gathered in the Knob Demonstration video? Do you want to purchase the products in the production video below? Available for sale.

@@enjoyingwoodworking691 Thank you for your response. I'm a fellow woodworker, but since I began living in Korea I have not seen any reliable suppliers of materials and tools. I was just wondering where you buy your plywood and the tools etc.

I overlooked the safety of using a router when making a video. that is my mistake A subtitle about safety was put in the video location of the dangerous scene. Thanks for your comment.

Thank you so much for asking the question. The size of the Lennox Hole Saw used to make the knob is 2" (50mm, the inside size is 46mm). The thing to remember is that the inside size is 46mm. And, the number of used forstner bits is two. One is 25mm for the insert nut side, and 15mm for the bit used for the outer hole. There is one thing missing from your question. The drill bit size used on the insert nut side is 10mm. The drilling depth should be limited to the length of insert nut insertion. I hope my answer is helpful to you.

@@enjoyingwoodworking691 Thank you very much for the detailed answer. It is very much appreciated!

@@enjoyingwoodworking691 Ciao il tuo lavoro è preciso la tua spiegazione è dettagliata nei minimi particolari a mio parere meriti 5 stelle ⭐⭐⭐⭐⭐

@@ciror1129 Grazie mille ^^

Большое спасибо

Thank you so much^^

월넛(호두)입니다.

샌딩몹(Sanding Mop)이라고 합니다. 자작 한 것 이구요~~

@@enjoyingwoodworking691 하~ 넘 멋지더라고요... 저도 저런게 꼭 있었으면 좋겠다고 생각을 했었는데~ 아이디어가 넘 좋으신 것 같아요~ 많이 배우고 있습니다~ 감사합니다~ 꾸벅~

@@user-zi6vb1hb1i 응원 해 주시니 힘이납니다. 더 좋은 영상으로 보답할 께요ㅋㅋ

I overlooked the safety of using a router when making a video. that is my mistake A subtitle about safety was put in the video location of the dangerous scene. Thanks for your comment.

Thank you so much for asking the question. The size of the Hole Saw used to make the knob is 2" (50mm, the inside size is 46mm). The thing to remember is that the inside size is 46mm. And, the number of used forstner bits is two. One is 25mm for the insert nut side, and 15mm for the bit used for the outer hole. The drill bit size used on the insert nut side is 10mm. The drilling depth should be limited to the length of insert nut insertion. I hope my answer is helpful to you.

Linseed oil with wax. The product name is AURO #129. Thank you so much^^

@@enjoyingwoodworking691 Thanks!

비싸게 사주세요 ㅋㅋ

Thanks for your comments.

Sorry for the late reply. The size of the large circle is 50mm, the circle around the handle uses a 15mm forstner bit, the inner circle uses a 25mm forstner bit, and center hole is 9mm brad point drill bit is used. And, Holesaw size is 50mm. 큰원의 크기는 50mm, 손잡이 주위 원은 15mm forstner bit 이용, 안쪽 원은 25mm forstner bit이용, 중앙 구멍은 9mm brad point drill bit를 이용 했습니다. 그리고, Holesaw 사이즈는 50mm입니다.

가시너트라고 합니다. 검색해서 원하는 사이즈를 구매하시기 바랍니다^^

Thank you so much^^

É uma nogueira. It is a walnut wood.

Sorry for the late reply. Recently my mother passed away. Thanks for your question, below is the answer to your question. If my answer is not enough, please ask more questions. 00:09 The outermost circle size is 50mm (radius 25mm) 00:16 The length of the sides of the hexagon (25mm radius of the circle) 01:06 Drill bit size is 2.5~3M 01:23 Forstner bit 25mm, hole depth 8mm 01:38 Side 6 holes, Forstner bit 15mm 02:23 Insert nut outer diameter size, drill bit 10mm (insert nut M8, hole depth 13mm) 02:39 Hole saw size 50mm

에폭시본드입니다

@@enjoyingwoodworking691 감사해요

I was thinking about the cost factor here as well but he has much nicer knobs as a result. If you want quick and dirty go the $1.25 route. IMHO

Making and using it yourself can be more than worthwhile. You can also enjoy the process of making it. Like you, I use a lot of plastic knobs. Thanks for your comments.

You'll be more surprised that I can still count to 100. :D

Thanks for your comments. Thank you so much.

Thank you so much^^ The size of the Lennox Hole Saw used to make the knob is 2" (50mm, the inside size is 46mm). The thing to remember is that the inside size is 46mm. And, the number of used forstner bits is two. One is 25mm for the insert nut side, and 15mm for the bit used for the outer hole. The drill bit size used on the insert nut side is 10mm. The drilling depth should be limited to the length of insert nut insertion.

@@enjoyingwoodworking691 Thank you very much and best regards.

Thank you for giving us good information. I think I'm growing on your advice.

Thanks for your comments. Thank you so much.

Is the radius of the circle. The length of each side of the hexagon is the radius of the circle. Thanks for asking.

@@enjoyingwoodworking691 Ahhh, now it seems obvious. Thanks much for responding. I just made these for my shop. Appreciate the knowledge share!

@@RyanWattersRyanWatters I'am so happy.

Thank you so much^^ I want to sell, but I don't know how to sell it yet. sorry.

@@enjoyingwoodworking691 list them on eBay and I will buy. 😊

You are right. I'll put a warning subtitle at that working location. Thanks for your advice.

If you know of an easier way than this, please let me know. Thank you.

Thanks for your advice. Safety is always the best. I admit there is a problem with using my router. From now on, I'll use the router in a safe way.

Thanks for your comments. Thank you so much.

You just need to decide on a distance equal to the size of the knob you want. Of course you should be able to cut it out with your hole saw. Thank you :)

Please tell me a better way. Thanks for commenting.

@@enjoyingwoodworking691 Hammers are hardened metal, striking one against the other is dangerous, hardened metal can fracture and in some cases cause injury through metal fragments flying around the workshop (rare but it can happen), would be better to use a hard wooden dowel, or a large diameter punch, or even use a vice to force the metal item into the wood, lots of ways to do it but not the way you did.

@@myworkshop2 Thank you for your kind advice. I hadn't even thought of the danger. Please monitor my video at any time, and ask for advice. Thank you so much.

I will be careful in the future.

Thanks for the good advice. I will refer to the video production

I actually liked the back ground music, it went well with the project, very smooth and relaxing just like Fred making the knobs, thank you.

그냥 구멍 뚫고 자르면 되는데 ㅋㅋ

@@enjoyingwoodworking691 에이 형님 그건 아니죠 ㅋ~

Thank you for your kind advice. I hadn't even thought of the danger. thank you so much.

I overlooked the safety of using a router when making a video. that is my mistake A subtitle about safety was put in the video location of the dangerous scene. Thanks for your comment.

Merci pour vos conseils.

Thanks for your comments. Thank you so much.

I'm sorry