DIY waste oil burner, almost anyone can build!

Подписаться 2 тыс.

Просмотров 14 тыс.

50% 1

Dead simple waste motor oil burner assembly and operation. I have to give credit to ‎@glumpy10 for this design. This is where I started my oil burning adventure. I have built countless burners since the early days of learning how these burners operate. I have taken what I've learned from these simple designs and have come up with the perfect burner for my application. I think it's a great place to start for anyone who wants to learn about burning waste oil. Thanks for watching! Like and subscribe, if you haven't already!
#diy #fire #heat #oilburner #wasteoilburner #wasteoil #heater #welding

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@glumpy10 9 месяцев назад

Spot on! Don't have to be complicated and having them run red hot is the the key.

@karlsoffroad 9 месяцев назад

I learned from the best oil burner on RU-vid! I'm glad to see you are back! Cheers and happy holidays!

@yachtsteve Месяц назад

Let's give it some bounce house air😅

@Superduty_59 10 месяцев назад

That burner really started getting hot at the end!

@stevesrt8 10 месяцев назад

thanks man. good stuff. have you tried a router speed controller for your air blower?

@stevesrt8 10 месяцев назад

also yes. I think you and the aussie oil burner would get up to some crazy stuff

@karlsoffroad 10 месяцев назад

Yes, I have,I should have demonstrated that as well! I will do that in the next video. I will build another style in the next one.

@Craigs_Adventures 9 месяцев назад

Again, Great video. thanks Karl

@xephael3485 10 месяцев назад

0:16 this is just a f****** piece of stainless steel that's worth a crap load of money unless you can get it from your buddy Joe down the street

@karlsoffroad 10 месяцев назад

I'll build an easier to obtain burner next. My other burners are made from exhaust pipe. I'll make sure there's no welding required as well. I will change the title, too.

@xephael3485 10 месяцев назад

@@karlsoffroad I'm not ripping on you, and I subscribe to your channel... I just see a lot of people post that they did something with some part which cost a lot of freaking money and it's not replicable unless they have the same source for that part. I love anybody posting about welding and waste oil burning.

@karlsoffroad 10 месяцев назад

@xephael3485 I understand completely. I didn't think about the material, more about the simple design. Someone else pointed out the welding, which I didn't think about either. I'll make one out of an old fire extinguisher. I know those are easy to get. Thanks for watching and commenting!

@enigmatube5437 9 месяцев назад

Im looking at building a waste oil burner to heat my shop, I like this design. I’m thinking of using 6 to 8 “ drill casing for the burner pot and putting the whole deal inside an old water heater

@gabrielcretu8737 8 месяцев назад

Nobody get boring around you 😂😂😂😂😂

@E.force89 10 месяцев назад

Awesome! Would you recommend this burner over the one that you have in your boiler? Seems like it's pretty efficient. Really looking forward to your next videos

@karlsoffroad 10 месяцев назад

What are you using it for?

@E.force89 10 месяцев назад

@@karlsoffroad heat. My current burner is set up in an old wood stove.

@karlsoffroad 10 месяцев назад

@@E.force89,it would be great for that.

@johnnye2346 9 месяцев назад

Sweep the Leg Johnny

@attilasipeki1418 8 месяцев назад

Gerat video! Simple as it, BUT how can you prevent the fuel tank from catching fire through the oil line?

@karlsoffroad 8 месяцев назад

I've never had that problem. That's the only problem I've never had! Lol,I run one in my boiler 24/7, and that's how I have always done it. The oil will vaporize much easier if it's warmed up. I know some like to have a p-trap in the line,but I've never needed it. Thanks for watching!

@attilasipeki1418 8 месяцев назад

@@karlsoffroad Thank you so much for the good idea :) I will make my own to. Greetings from Hungary/Budapest!

@slimtny 9 месяцев назад

What size burner should I use for my meth lab? Its around 1700 sqft

@karlsoffroad 9 месяцев назад

This one should do the trick! 🤣

@sshhiinnoollaa 10 месяцев назад

lol my car does the same thing

@karlsoffroad 10 месяцев назад

Lol

@sevanson1 9 месяцев назад

thanks for the vids! But may I ask you why on God's earth would you use your nice MIG as a frick'n workbench and welding bench?

@karlsoffroad 9 месяцев назад

Just happened to be the right height. I was waiting for someone to comment on that! Lol, my workbench is filled with projects at the moment, but I plan on getting caught up and using that instead. 😅

@MrSprintcat 9 месяцев назад

Awesome, not a care in the world 😅😅

@MrSprintcat 9 месяцев назад

Good job and to the point, your a mad man ,and thats awesome. I will be doing the same thing as your design.what did you use for the blower ?

@karlsoffroad 9 месяцев назад

A bounce house blower. Model MS-1019-U2

@MrSprintcat 9 месяцев назад

👍👍

@OP8Mike 9 месяцев назад

Having trouble with your slowing or inconsistent drip rate? Here's the solution on how to maintain a constant temperature? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Rg94BKdvjk8.htmlsi=7iNVqHObtJ22G1vE

@karlsoffroad 9 месяцев назад

I just use a pump and a needle valve with a bypass,so I don't deadhead the pump. Consistent and reliable oil delivery. I run everything outside, so the temperature makes a huge difference in flow rate with gravity feed. Thanks for watching!