DIY White Concrete Using Titanium Dioxide

Подписаться 14 тыс.

Просмотров 16 тыс.

50% 1

In this video, I go over how I use Titanium Dioxide to dye my concrete containers a bright white color! Check out my other videos for How-Tos on Candle Making, Concrete Design, and other DIY projects! 😊
If you have any questions - feel free to comment below! I will get back to you 😊
Enjoy the video!
CHECK OUT MY ETSY SHOP ❤️ Use Code: "RU-vid20" For 20% Off! www.wizeowlcandle.com
❤️ Follow me on Instagram: wizeowlcandles
❤️ Follow me on Facebook: wizeowlcandles
Links for Materials I use 😍
Candlemaking:
Presto Pot - amzn.to/3dUqSOF
Thermometer - Digital - amzn.to/3hJDLMD
Thermometer - amzn.to/3yAOb7Z
Pitcher - 4 pounds - amzn.to/2SRBiHw
Pitcher - 2 pounds - amzn.to/2SRBiHw
Scale - amzn.to/3yLyAmv
Golden Wax 464 - 10 lb bag - amzn.to/2UzfNMo
Golden Wax 464 - 5 lb bag - amzn.to/3jTmLq8
Golden Wax 464 - 50 lb Box - www.candlescience.com
Wick Stickers - amzn.to/2VjMb5V
Wicks - amzn.to/3xBj1xa or www.candlescience.com
Warning Labels - amzn.to/3hprq12
Wax Melt Clamshell - amzn.to/36jTT2a
Wax Melt Heart Silicone Mold - amzn.to/3hlKnBL
Avery Labels 2.5 Circle - amzn.to/3yrEkBs
Avery Labels 2 Circle - amzn.to/3xsGMHR
Wick Cutter - amzn.to/3dRAIRB
Popsicle Sticks - amzn.to/3yBYBEo
Fragrances: www.candlescience.com or www.lonestarcandlesupply.com
Containers: You can make your own from concrete - here is a video on how: • DIY Colored Concrete C... Or you can purchase tins, glass, etc.
Concrete Containers:
Silicone Mixing Bowls - amzn.to/2YWzMag
Cylinder Mold - amzn.to/3ANKdeq
Oval Mold - amzn.to/3dQzR3i
Square Mold - amzn.to/2Uy3wrd
Hexagon Mold - amzn.to/3wmtPOr
3 Pack Molds - amzn.to/2Uy3Whh
Small Hexagons Mold - amzn.to/3hIV14P
Sponge brushes - amzn.to/3hKKG8n
Sanding Blocks - amzn.to/3ht3tGc
Titanium Dioxide - amzn.to/3e2wiav
Craftsmart Acrylic Paint - amzn.to/3dZucIA
Printing - Dust Covers - Vinyl Projects:
Cricut Maker 3 - amzn.to/30uUHBA (best bang for your buck!)
Cricut Basic Tools - amzn.to/30ubqVR
Shipping Supplies: www.uline.com
** Some of the links above are affiliate links. This means that if you purchase from my links, I get a small revenue, helping me sustain the content I create, with no extra cost for you. I only share links to products I believe in, tried, and enjoy using myself! :)
******************************************************************************************
If you have any questions please feel free to post them below and I will be happy to answer them!
Don't forget to subscribe so you see my new videos! 1-2 new videos weekly! ❤️
_______________________________________________
I do not own the music in this video. RU-vid Copyright Free Music
#concretecandle #diyconcrete #marbleconcrete #wizeowlcandles #1000subscribers

Хобби

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 90

@rachisonyoutube 3 года назад

Thank you! So informative

@WizeOwlCandles 3 года назад

Thanks for watching!

@stephanieocasio2720 3 года назад

Love your videos. Thank you for your help.

@WizeOwlCandles 3 года назад

Thanks for watching!

@lisas5187 3 года назад

Great video, thank you! I have been mixing the td in water first but I am going to try adding the powder into the cement!!!

@WizeOwlCandles 3 года назад

It is way easier in my opinion! :)

@khalidal-hassan2566 2 года назад

Big thanks!!

@WizeOwlCandles 2 года назад

You are very welcome!

@shwetakapoor1111 3 года назад

Thank you ❤

@WizeOwlCandles 3 года назад

You're welcome!

@annemariebridges1459 2 года назад

Thank you.... can't wait to play with a white base.

@WizeOwlCandles 2 года назад

Yes! Titanium dioxide is a game changer

@sorayastevens545 3 года назад

Great video! I tried Direct Colors white pigment which worked well, but I already have TD for cold process soap making, so I would rather use that. Thanks for showing both methods. I'm going to try this today. Please keep these type of DIYs coming! :)

@WizeOwlCandles 3 года назад

Thank you for sharing about direct colors! That is good to know :) Thanks for watching!

@tiffanywickens6465 3 года назад

Thank you for sharing.

@WizeOwlCandles 3 года назад

Absolutely!

@marknemeth1889 3 года назад

Thank you:)

@WizeOwlCandles 3 года назад

You are very welcome! Thanks for watching!

@elanachristiansen 3 года назад

You really have such a great process and great videos. Thank you for sharing them. I'm wondering if you've considered using materials that are not disposable to cut down on plastic waste? You could easily replace those plastic cups with reusable silicone bowls for example.

@WizeOwlCandles 3 года назад

That is a great idea! I will have to try that out! Thank you :)

@CovetAlchemyCandles 3 года назад

You had mentioned in a past video that you were testing a new sealer for candle making. If you don't mind sharing your thoughts on the new coating. thanks!

@WizeOwlCandles 3 года назад

Yes I am going to be posting This soon I wanted to make sure everything was tested properly :)

@daniellebartlett9972 2 года назад

Hello! I love your videos, they have helped me so much in making my candle vessels. I was just wondering if you have added color after mixing in your TD, for a white base for your color?

@WizeOwlCandles 2 года назад

I have! It definitely helps grab the color more :) I usually use it on colors that I need bright

@Shelley_CoreRN 2 года назад

I add my titanium to the dry cement and stir the dry ingredients 1st. I add about 5 or 6% of my weight. That seems to get mine super white

@WizeOwlCandles 2 года назад

Nice! Thanks for sharing!

@hayakhan2298 2 года назад

Thanks for your content!! I'm struggling with the hexagon mould off amazon as it really is tough to get off but hoping I can get the hang of it soon. Because of it's shape its really hard to roll down. The smaller octagon set of 12 moulds have my jars coming out a little lopsided at times even though im shaking and adjusting it on a flat surface - tips?

@WizeOwlCandles 2 года назад

Hi! For the smaller ones I would say just tap the sides gently to get the form back. I experienced the same thing but after playing around with it a bit they straighten out :)

@alexfurey7642 2 года назад

Such great content, thanks! Have you ever used cement instead of concrete? I'm considering using cement but I'm not sure if it's too brittle.

@WizeOwlCandles 2 года назад

Hi! Thanks! I have used cement but it didn't work well as it was very weak. The Concrete is mix of cement and sand which helps with the durability

@viennacarbajal5636 2 года назад

Hi! Have you tried this process with the cement and titanium dioxide by also adding a direct colors pigment? I really want to learn how to get a nice cream/beige color and I have yet to see someone do it. Thank you love your videos!

@WizeOwlCandles 2 года назад

Yes :) it works well! I would only recommend for light colors though like pastels or light shades

@jomas1676 Год назад

Can you add a little blue powder for concrete to have a bluish hue without compromising the strength of mold or avoidca chemical reaction?

@WizeOwlCandles Год назад

Yes! I use concrete pigment to color my concrete :)

@athraaali5969 3 года назад

Loved the video 🙏🏼 but why you don’t use a white cement instead? Thanks

@WizeOwlCandles 3 года назад

I haven't found white cement I like using. I also like the idea of controlling how white the container can be :) thanks for watching!

@loriblunt5352 3 года назад

Great info Kayla 👍 I'm having an issue with my mold, they are coming out slightly lopsided. Any tips would be greatly appreciated. Thank you. 😁

@WizeOwlCandles 3 года назад

I would make sure it is on a flat surface when drying and really make sure you are tapping the sides. I found that sometimes the concrete will be higher on one side so getting level to the mold to see if the bottom is level will help too :)

@loriblunt5352 3 года назад

@@WizeOwlCandles thank you Kayla, I'll try that. 😊

@WizeOwlCandles 3 года назад

Absolutely!

@lagomco9539 3 года назад

Hi, I´m having a hard time getting my vessels sharped after demolding them. when you said: 4:1 ratio. how much concrete grams are in that ratio? why sealer is necessary on vessels? and why mine got cracked after poring my wax :( Help!!!

@WizeOwlCandles 3 года назад

I actually don't measure the concrete in grams. I have done it by eye this whole time. I would say for my cylinder mold I usually use about half of a red solo cup. I would say try to make one without as much water to test it out. That may help with the cracks. The sealer is so that the wax doesn't seep through the concrete. I would say at least seal the inside

@urmilaagarwal3335 2 года назад

Hi can I check which wick size you use both cotton wick and wooden one. Thanks

@WizeOwlCandles 2 года назад

Hi! I use different sizes for each container. I usually use CD 12 or CD 3 depending on what container for cotton wicks. I don't use wood wicks in all my containers as of now

@cindyrobinson2618 3 года назад

Hi there. Just found your channel and subscribed! I was just wondering if you have ever tried to make a terra cotta colored vessel? I know there are terra cotta colored acrylic paints, but I’m just wondering if they would come out looking just orangey because you can’t use too much paint in the cement. Just wanted to get your thoughts.🙂. Just ordered 3 molds…can’t wait to try these!

@WizeOwlCandles 3 года назад

Hi! Thanks for watching! I did a red color on one of my videos that almost looks terra cotta. I get pigments from direct colors and they may have a color close to it!

@cindyrobinson2618 3 года назад

@@WizeOwlCandles thank you so much for your quick response! Love your videos! Cant wait to see whats next!

@WizeOwlCandles 3 года назад

@@cindyrobinson2618 thank you!! ♥️🙏

@CarolineDeKimpe 7 месяцев назад

Hi :) What percentage of titanium dioxide do you recommend? I have been advised that using too much weakens the structure of the vessel.. Thank you

@WizeOwlCandles Месяц назад

Yes if you use too much it will weaken it. I usually use no more then 2 Tablespoons for an average size container

@jennymelendez1049 Год назад

Thank you! I added titanium dioxide and acrylic paint and my paint didnt show at all, I tried to marble and it came out very shiny not Matte. Any tips?

@WizeOwlCandles Год назад

That's strange. I would say try different acrylic paint. Some brands I have noticed blend in more than others. I hope that helps!

@annalisagibbs1564 2 года назад

How would you do a marble white effect?

@WizeOwlCandles 2 года назад

I have done white marbled with other colors and I have a video on my channel to help! It's just mixing them together :)

@rachaelvaldivieso3434 2 года назад

If I am using titanium dioxide, can I also use the marble technique to make these and can I use acrylic paint also in addition to the titanium dioxide?

@WizeOwlCandles 2 года назад

Yes! I use acrylic and pigment dye for marble. Plus you can do the titanium dioxide to make your white in the marble more true white

@ItsSheila 2 года назад

Have you tried plaster of paris?

@WizeOwlCandles 2 года назад

I have not however I have heard of others using it :)

@SimoNowo23 3 года назад

Hi! I have one question: do these forms not crack after some time? I made a few casts of the cement itself and poured it with wax and after a few weeks a crack appeared

@WizeOwlCandles 3 года назад

Hi! I usually have that issue if I add too much water. I would test out a few different consistencies :)

@SimoNowo23 3 года назад

@@WizeOwlCandles thank you very much for your answer :) best regards

@maricris2561 3 года назад

Great idea!! Question please! Have you had any issues with your UV coat? Some people in the candle groups were saying we shouldn’t use that type. I would love your opinion please

@WizeOwlCandles 3 года назад

Hi! Sealant is definitely a preference. I personally have tested Polycrylic on mine and have not had any issues. This is straight from their site for your reference :) "Minwax® Polycrylic® Protective Finish is a crystal clear, fast-drying protective topcoat for use over bare wood, oil- and water-based stains, paint and wallpaper. It has very little odor, is non-flammable, cleans up easily with soap and water, and can be recoated in only 2 hours"

@maricris2561 3 года назад

@@WizeOwlCandles thank you so much i honestly thinking the same! Appreciate your answer

@claudiagold1925 2 года назад

@@WizeOwlCandles Thank you so much for these tutorials, I love how concise, straight to the point and clear you make them! I have two questions 1. For the sealant do recommend the satin or matte finish? 2. How long should the containers cure before pouring the candle wax? Thanks again!

@DONTEATTHEPIE 2 года назад

have you tried using the white version of your black pigment in comparison to titanium dioxide? do you think that'd work better or worse? i've read a lot of feedback about td compromising the structure of the vessel and i desperately want to avoid that! thanks for sharing all of this great content!

@DONTEATTHEPIE 2 года назад

nvm, the end of your video answered my question lol can't wait to see that video!

@WizeOwlCandles 2 года назад

Thanks for watching!

@conniezaiss7883 3 года назад

You have started using bottled water. You said in one of your last 2 videos it is just better. Can you tell me why you have found it to be better? BTW I am absolutely inspired by your videos to try this for my succulent planters. And I may expand out to making candles as well. I am just starting out a business and am so excited about trying these out. Thank you!!

@WizeOwlCandles 3 года назад

Hi! Yes I have noticed it gives a nicer color and the colors blend better with the drinking water than tap.

@WizeOwlCandles 3 года назад

Thank you for watching! I am glad they are helping you! ♥️

@THDRNGHT 2 года назад

I'm not sure why but every vessel I make, it always comes out tye-dyed but I want it to be a solid color, how do you stay profitable on your candles if you require so much paint/powder?

@WizeOwlCandles 2 года назад

I use pigment powders and the titanium dioxide. Once you get in a flow less containers come out messed up :) it just takes practice

@lisalt1655 Год назад

Is this strong enough to make a cement bowl?

@WizeOwlCandles Год назад

Yes it should be depending your mold :)

@jennymelendez1049 Год назад

How much Cementall are you using for the Amazon cylinder mold?

@WizeOwlCandles Год назад

I am using about 1/2 of a solo cup. I hope that helps. :)

@1Cor13-13 10 месяцев назад

how much TD to 1/2 solo up?

@khalidal-hassan2566 2 года назад

How can ilI get milkshake consistency?

@WizeOwlCandles 2 года назад

Keep stirring. Don't add too much water :)

@natashagreen5385 3 года назад

Thank you for sharing your Tips & Tricks Could you mix plaster of Paris into the cement to make them white? Can you use Mica powder to colour the cement?

@WizeOwlCandles 3 года назад

I haven't tried plaster of Paris or mica powder so I wouldn't be able to let you know. I do know some powders are not strong enough to change the color.

@dwansmith4974 2 года назад

What can be used instead of Cementall

@WizeOwlCandles 2 года назад

I'm not sure as I have only found cement all to work for me personally :) you can always test out different concrete

@gracesalas3110 3 года назад

Can we add acrylic paint after doing this process ??

@WizeOwlCandles 3 года назад

Yes! I would only add it on the outside though :)

@THDRNGHT 2 года назад

@@WizeOwlCandles Is there any issue with adding acrylic paint directly to the mixture?

@josjoseph1883 3 года назад

Can you just add white acrylic paint instead?

@WizeOwlCandles 3 года назад

You can absolutely. I have found it doesn't work as well. The white paint really gets hard to stir into the concrete (unlike blue, red, or other colors for some reason). Give it a try though and see which option you like best :)

@josjoseph1883 3 года назад

@@WizeOwlCandles thank you