DIY WOODEN COASTERS | Beginner and Intermediate Designs |

Подписаться 8 тыс.

Просмотров 29 тыс.

50% 1

In this video, I make two different types of WOODEN COASTERS. The beginner coasters are made with Hickory which gives the coasters a nice rustic look. For the intermediate level coasters, I used scrap wood from my shop. I glued together the different pieces of scrap wood and then ran the glue up through a planer. From this new laminated board, I cut out the coasters.
Want to make other WOODWORKING PROJECTS THAT SELL? Check out this playlist: • MAKE MONEY Woodworking...
Like this video? Check out this one: • How to Make Epoxy Coas...
REMEMBER!
✅Like this video (It helps me out a ton)
✅Let me know if you have any questions in the comments (I try to answer all of them)
✅Subscribe to the channel here: / @ben_grimsley
See affiliate links below for products and tools used in this video🧰
SawStop Table Saw: amzn.to/45l69vw
Powermatic Dust Collector: amzn.to/3PN7vJz
Irwin Clamps: amzn.to/45iBa2Z
Titebond III: amzn.to/46r1R7e
DoubleSided Tape: amzn.to/45hqeCF
DeWalt Planer: amzn.to/3Q89uK0
Saw Safety Hold Down Stick: amzn.to/3RPTZHM
Bosch Palm Router: amzn.to/3ZLuppc
Bosch Sander: amzn.to/3ZKcgbo
Bora Centipede Base: amzn.to/3SMKGJc
Bora Centipede Table: amzn.to/3STOatn
Filming Equipment 🎥
Gimbal: amzn.to/3TBLEIs
Iphone Mic System: amzn.to/48vTc3E
External Hard Drive: amzn.to/4azz5Uk
As an Amazon influencer, I profit from qualifying sales, which helps me bring you more helpful woodworking content.
Check out my Etsy shop here: boardsbyben.etsy.com
Thanks for watching!
#woodworking

Хобби

Опубликовано:

7 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@Ben_Grimsley 9 месяцев назад

Like this video? Check out this video on making an end grain cutting board: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TiLaaiQzpGg.html

@whitag01 9 месяцев назад

I love the warm tone of that finish

@Ben_Grimsley 9 месяцев назад

Me too! I really love working with hickory. Thanks for watching!

@WoodworkingTop535 Месяц назад

Really quality video

@stacijones8271 3 месяца назад

I want to learn how to make coasters. This is so cool and creative! Thanks!

@dorb6246 5 месяцев назад

Love the video. Keep up the great work, can't wait for other videos!

@Ben_Grimsley 5 месяцев назад

Thank you! More on the way

@PapaJoeWalsh 2 месяца назад

Great video - Thanks for posting!

@Ben_Grimsley 2 месяца назад

Glad you enjoyed it! Thanks for watching

@raymundomarroquin7105 2 месяца назад

Thank you for sharing your skills and knowledge..

@Ben_Grimsley 2 месяца назад

My pleasure!

@nasserharb2814 4 месяца назад

Good job. I highly recommend a good microphone for a better quality sound

@Ben_Grimsley 4 месяца назад

Thank you! I now have a mic and I think it has made a huge difference (but let me know what you think). I think this was the last video I made before I got a mic. Thanks for watching!

@randomuser23277 3 месяца назад

Really cool, too bad I don’t have a planer, they look very clean!

@Ben_Grimsley 3 месяца назад

You could make these without a planer. Just start with lumber the same thickness you want your final coaster to be. Thanks for watching!

@stevelewis8919 5 дней назад

Just sand them.

@xokrissy13xo 2 месяца назад

How do you make that coaster finish? Im thinking of getting into making coasters as a hobby, this was a great video full of great information thank you

@Ben_Grimsley 2 месяца назад

Glad it was helpful! I will make a video soon on my coaster finish. Stay tuned…

@sflagg0817 4 месяца назад

Thanks for sharing, would hot glue work in place of double sided tape. Thanks

@Ben_Grimsley 4 месяца назад

I have not tried this, but I would guess it would work! Thanks for watching!

@davidfix444 2 месяца назад

How thick are they Thank you

@Ben_Grimsley 2 месяца назад

I make mine roughly 0.75” thick. Thanks for watching

@Ross_MC 7 месяцев назад

Couple of questions. What else could you use to seal the wood? i.e. a clear varnish or lacquer? Can you apply that AFTER the beeswax/oil mix? Tyia!

@Ben_Grimsley 7 месяцев назад

Great questions! Any type of oil based finish will work great. Just don’t use a water based finish (like polycrylic) because water will eat at the finish. And of course since it is a coaster, it will be exposed to water. I always apply wax last. The wax is less about sealing the project and more about giving it a great feel. Hope this helps! Let me know how it goes when you make your own coasters!

@butbuckets Месяц назад

How long does the glue take to cure?

@Ben_Grimsley Месяц назад

I think it takes 24 hours to completely cure, but you can usually start working with it after 4-6 hours. Hope this helps!

@66millworker 4 месяца назад

How much do you sell them for?

@Ben_Grimsley 4 месяца назад

I usually sell them for $5 each. At craft shows, I sometimes throw in a set of two coasters if a customer buys a more expensive cutting board. Hope this helps!

@ArjenBes 2 месяца назад

What are the de mentions of your coasters?

@Ben_Grimsley 2 месяца назад

I think these were 4.25” x 4.25”

@ArjenBes 2 месяца назад

Thanks!

@jeff2101 3 месяца назад

What price range do you sell the basic set for?

@Ben_Grimsley 3 месяца назад

Usually $20-$25 for a set of 4 coasters. I would up this to $30 if I include a holder. Hope this helps!

@jeff2101 3 месяца назад

@@Ben_Grimsley Awesome, I have 4 very old oak 6' long true 4x4"s that I have been trying to figure out what to do with. I want to cut and seal them but try and preserve the natural patina. Thanks for the direction.