DJI Avata 2 Full Cinerip | Dronarchy FPV 

you can do this bro. Send that clip, make it happen 👊🔥

once you practice enough, you can pull anything with what you have 🫶

Yeah, the people who hate on this thing are morons. This is like, one of if not THE best FPV drones on the market. Outside purpose built drones for niche circumstances, or people who just enjoy DIYing something. You'd be better off with 10 prupose built drones, all made for a spwcific purposw,, but the avata 2 is basically a jack of all trafes, while a master of none. If you can only have a few drones, the avata is the best single fpv drone If you just wanna buy and fly, nothing out there beats it. Maybe you lose a tiny bit of maneauverability, or speed, or acceleration, but I'd rather sacrifice that a bit when everyone else is losing signal, or changing their batteries for the third time, or lugging around a go pro adding weight and drag, and making the already non-existent battery life even shorter. The modularity and repairability isn't there, but that doesn't matter when for $50, you just get a new one. It's not like replacement parts are free, and good luck having someone send you a brand new one if you lose your custom FPV drone. I mean, don't get me wrong, you should still absolutely fly custom FPV drones AT LEAST once, but they are definitely nowhere near a "daily driver" like this is. I think people are just jealous this is so good, and don't wanna feel like a "noob consumer" from flying an easy to use, mass market drone. I think a big part of it is misguided elitism, and not wanting to admit a drone you can just run to the store and pick up 2 of them on a Tuesday, is a better drone than your custom built Frankenstein.

@@brennanIX you hane no idea how much fun I have with this drone. Still using the same props from day 1!

@@brennanIX Absolutely right! The DJI Avata 2 combines versatility and user-friendliness in an impressive way. It’s perfect for pilots who want the best of both worlds, cinematic and FPV. Your points hit the nail on the head.

Idk check fpv Fenix, I doubt that level could ever be achieved with this drone, don't get me wrong it's a great starter drone but there's definitely a cutoff

if I can do this and I'm a Mavic pilot, then imagine what you can do if you put the time. Facts 👊✅

Liquid Drum and Bass 💯🔥

too much fun bro. Anyone can fly this.

@@dronarchy @dronarchy I'm training in the simulator to have this courage kkk, I bought the drone but it's still stalled. Watching your videos is helping me a lot, I'm glad the internet is there to connect you to me, even if I'm in Brazil!

@@safakaswedishairgunforum-n1490 more clips soon 🔥🫶🔥

Thanks a lot!

@@AB-bu8ti fun days 🔥

@@leobislig6190 Hi Leo. Remember this is a heavy whoop and not engineered to fly like this. Of course I need to find its limits. Using 940° freestyle rates 👍

@@dronarchy i appreciate it, ill keep that in mind. ill try those rates

@@aerulfpv will continue posting Avata 2 clips 💥

Thank you! Cheers!

check my other clip that explains the rates and setup. Will help a ton 👊

@@dronarchy Done! Thanks & keep making content like this - great FPV skills. Greetings from Belgium. PS: Any recommendations on a good simulator?

@@Drone_GambitI like the feel of LiftOff, but I like the look of TrypFPV and Uncrashed FPV so I use all 3 lol.

650° is ok to start ripping freestyle, till they get use to agile rates. Then crank it up to 900+ 👊😎.

@@dronarchy jyeah, im quite surprised myself, I didnt think the avata 2 can be that agile. It behaves really close to the TrypFPV simulator that I use to practice. Like you said, the problem is not the drone, its the pilot. Keep rockin that avata boss 🤘🏻

@@bashrushdn it takes more throttle control. Anything is possible if you know how to execute it.

Show me the rates and expo

@@AnemosFPV thanks for asking. Need to check the song name and artist. Got it from Artlist licensed music site.

@@dronarchy Please do. If you have a deal with artist post the link so they know I'm coming from your channel

@@asaki_drone from OriginalDobo Etsy store.

@@dronarchy thanks!!🥳

mad fun, more clips ahead!

thanks, more clips ahead!

@@cipri198zero is not rates, it's finger dexterity. All drones will have some sort of prop wash on any abrupt move. Why? Because is physics. Unless you change air density and prop design. Just be mindful of your throttle during moves and fly more elegant(smooth). That will avoid propwash 👍

J'en utilise 25° 👊🔥

@@dronarchy merci 🔥

hey Blake, I show all my settings and rates on my video called Pro Ripper. Check it out 👊😉

you can do this with enough practice. Go out and send it 👊

real freestyle 940, cinerips 650.

thanks for asking. These are HQ 2.9x2.7x3 which gives more control due to lower pitch value. Had to use smaller screws, because they are slimmer.

thanks for the answer 👍

@@dronarchyi got these props, but the screws are too long. Did you replace the screws with something shorter? Any tips on a specific size?

great question. It depends on the situation. Would say 60% to 70%. If it's a nasty trick with a small dive then 100%.

@@dronarchy Thank you bro... Would the conditions change if the default prop from the Avata 2 is used?

@@Adept1780 no deathrolls and I've been doing same tricks as my 5".

thanks for asking. These are Avata1 props by HQ called DT 2.9x2.7x3. Must use shorter screws.

@dronarchy awesome I'm all over this!✌️

@@dronarchy I have these propellers, and also the Avata 1 screws, but the holes don't match, if you screw on one hole the other is slightly moved towards the edge. I mean the distance between the motor holes of Avata 1 and Avata 2.

thanks for asking. Think I left it at 20 or 25.

always fun bro 🔥

DnB clips hit different 🔥🫶🔥

@@dronarchy disc golf too though 😎🤑

you mean to fly like those influetards technerds on RU-vid? Naaa bro, this is the real drip.

@@dronarchy I meant more like your ladder dive video, pushing yourself to fly harder / better / progress. Not sure what you mean about influentard technerds, we're talking about quads on the internet, no qualms with being a technerd lol.

depends if you want super aggro freestyle with 35°, or chillax cineflow with 20°.

@@dronarchy What is the setting in this video?

if it's a nasty change of axis then it can produce some wobbles. I'm ripping fast 940° rates and having a ton of fun so far 💯🫶

must upload it to Thingiverse. Keep in mind that you will need double sided tape.

That's would be greatly appreciated :) thank you

danke bruder 👊. Yes, I need to visit Germany again. Ludwig's castle need a proper rip 😉

still a joke, but people panic after all these years hearing the same nonsense.

will notify everyone once is up for free download.

I have a video that shows all the settings, rates and remote control setup. Watch the Pro Ripper clip.

@@dronarchy thanks a lot :)

@@luisamarales941 I hated sims for 3 years in a row. Till I found FPV Logic last year. Now do the math 😉

​ Is there a profile that best approx the real avata 2 in it?

@@Adept1780 Noow available at MyFPVStore, called HQ DT 2.9x2.7x3. Keep in mind you will need shorter screws!

I heard that OriginalDobo is not shipping outside US. I'm sure someone will make a different bumper print soon enough.

@@dronarchy Thanks for your answer, there are several bumpers out there, but I dont know if its worth getting 1 from amazon randomly, maybe it is though idk

the bumper print is through @originaldobo , the top print cover is mine. Props HQ DT 2.9x2.7x3

They claim that this size of propeller is not compatible with Avata 2. Only with Avata 1? Is this true? I mean there's no other additional modding needed?