DJI Mini 4 Pro How to do Waypoints  

DJI MINI 4 Pro Waypoints using the DJI RC 2, I show you how to do it with the drone in the air

Another enjoyable video 👍

Very cool!!😀🐈‍⬛🐾🐈🐾👍👏👏👏😀

Nicely done 😎🤝

Thanks for the vid on this. I'm still finding it easier to just use the mini 2 with Litchi than the mini 4. But then, I like making a Way point mission on computer in my office before stepping outside. Seems the DJI implementation of this will chew through some battery charge cycles for Nothing. Admittedly after watching I can see some Good points in this. Thanks for your time.

Well done Mr. Matthews! It's so great that DJI put this feature on the Mini 4 Pro!

Thanks for sharing the tutorial. Look forward to how it performs at different times of day. I tested the mini3 pro at different times of day and sometimes it starts the Waypoint around 6' above where it was initially set to.

Hi Shaun. Been looking for some 4mm lifting eyes like yours. As the fixed ones are not easy to fit in the shoulder bag. But can't seem to locate ones with the loose D ring like yours. Some pointer would be helpful. I have the Air then Air2 then the 2S then the mini3pro and ordered the day it came out the 4pro, which I think is the best for most of my uses. Enjoy your videos. Need to get back over to our property in Alicante and often wonder what neck of the woods you are flying. Assume it is a bit further south of Alicante. Best Dave

But you must remember that if you want your waypoint to be exactly the same each time you fly that mission, you must take off from exactly the same point every time you do that mission as it records the height from its takeoff point, so if you takeoff from something 5 foot higher All of its waypoint will be 5 foot higher

Curious…where are the previous missions stored? In the cloud, the internal, or the sd card?

There are loads of great reasons to use Waypoints. What I think could be improved on with this is, In the video the aircraft is repeating every single little adjustment including all the mistakes. It would be great to just set all of the parameters for the beginning waypoint, position-orientation-gimbal etc then fly to the next location and do the same and have the algorithm figure out everything in between to make it a seamless smooth shot. then to take it to the next level maybe even adjust some of the parameters like the ramping of the speed between waypoints and the length of time the aircraft spends at each point before moving to the next. Or even be able to pause and un-pause on the fly using the controller.

nothing wrong with doing waypoints on the RC2 in fact it saves battery if you save the mission before you set off out .

Have you found anyway to set a waypoint based on a longitude latitude coordinate ?

it doesn't seem to replicate your camera position /angle .... unless you give it a poi .... IT would be better if it did the same as your were flying it/set up ... i just tried myself ...or did i miss some thing ??

I have a dji mini 4 pro rc-2 controller. using coorinates can I go from my take off spot (point A )to another coorinates (Point B) have it land at point B and RTH Point A? If so How?

When flying using an already defined route, can the Halt button be used to make the drone pause and then, somehow, let it continue its waypoint flight?

Super helpful Shaun. I am learning a lot from your videos. I have only had my mini pro 4 for 5 days.😃😃🦘🦘Cheryl