Sir, I just want to say that when it comes to Ronins and mounting, you are by far and away my favorite creator. You are concise, smart, and more than anything, SAFE. I feel like there has been a lack of safety as these tools have been given to more and more people. I am 21 and trying to make specialty shots my career (and well on my way to doing so). I respect you and your process so much. Thank you for sharing with all of us
Hello, awesome video! I have a question... Is it possible to use the lidar subject tracking with a longer zoom lens? like the newer canon 24-105 and have it on 105 mm? For a tighter framing on the subject? Thank you
Hey Adam, did You try using the new hand unit/pro grip with the "old" transmission system and monitor? My question is - does it allow tap to focus functionality using the transmission system or the cable hub + high bright monitor?
Your last video on the cable hub and setup was very useful. Will you be making a video showing how this could all work on a komodo for example with the cable hub? Do you even need the cable hub anymore?
What Arri has for accessories with Alexa's, DJI has created for all other cameras, now imagine the wireless video transmission and focus pro with Blackmagic's newest Ursa Cine.
8:31 Adam, can you give the names of the parts you used to modify the mounting? I’d love to be able to mount this to my 15mm rods the way you have it configured.
Thanks for all the amazing insight! I was wondering... when controlling the gimbal with the high bright monitor, is it possible to control multiple FIZ motors? Not necessarily at once but for my workflow it would be really beneficial to be able to have the ability to set focus from the high bright monitor, and then swap to controlling the zoom motor?
Hello, I watched some of your videos on YT about DJI Ronin. I'm just starting with them. Tell me, if I have Ronin RS2 DJI transmission and Sony A7iii, is it possible to control the Ronin and control SONY parameters? And how to do it?
Was looking for your review, you always tell something else others miss! I wouldn't mind longer videos. Is the Car Mode stabilization in the DJI RS4? or is it only available on the Pro?
The RS4 Pro got a lot less hype than the RS3 Pro did I think mostly because it was actually made for more professional operators as opposed to amateurs (who were the original target demographic). I feel like their new accessories reflect that - all professional pieces, meant for flexibility rather than a one-man band just getting started for the first time.
RS 4 Pro, here you are certainly quite right. I think that if someone who is just starting the adventure of filming, may think that these things are too complicated. Nevertheless, it all just seems complicated, in fact each of these gimbals and their accessories are quite easy to use, but the fact is that you need some time to get familiar with it.
A great review, as always. Love my RS3 pro with an FX6, especially with the simple Steadimate adapter to us with my Steadicam rig, rather than getting a Float. But now you have me yearning for the RS4 Pro with the focus system.
I'm still trying to figure out if the Rs four pro combo comes with the lidar? Some of the youtubers were making it seem that way. But on DJI's website, I'm not seeing that So if I have the RS2 pro combo, would I be able to get the focus pro combo and switch the handles?.
Hey Adam, you have done a terrific job reviewing the system, in my opinion the best one so far I found on the internet. Question for you- if you were to compare the AF from the lidar to something like the AF on R5 or FX3, would you say its as "sticky" or its more of a Nikon situation where the AF has issues sometimes. Thanks!
Very nice and interesting video Adam! Great job on the different rig. Looking forward to watching the setup for the R2, quite curious about it. Just a quick one: how did you power the focus motors from the R2? Cheers, Chris
Excellent video. Can the internal camera (Canon R5II) tracking function control the Ronin RS4 Pro gimble? The Canon has excellent tracking and auto focus.
And dji ronin app or RaveEye does not support active track because they do not have desqueez feature of anamorphic footage ☹️. Expensive failures. DJI customer support is useless.DJI is too big to fail now.
And dji ronin app or RaveEye does not support active track because they do not have desqueez feature of anamorphic hdmi output☹️. Expensive failures. DJI customer support is useless.DJI is too big to fail now.
Dobry film! Mam pytanie. Czy rączka z extension base (pokrętło) będzie mogła po kablu sterować silnikiem focusa z zestawu combo? Rs4 pro. Pozdrawiam i zazdroszczę kupy sprzętu :)))
06:46 that looks like the Tilta Float?…. But I don’t recognize the vest. I saw an older video of yours (I think it’s roughly 3y old) in which you reviewed the Tilta Float, but the vest looked very different (was looking more like a more advanced waist strap/belt than a vest). Did they improve it in the mean time, and it’s the vest that I see here in this video, or is it something else?
Are you going above the 10lbs (4.5kg) with any of these rigs on the RS4 Pro? I want to fly a 10mm ultra prime with a c70 on one and that combo without motors is right at 9lbs...
Do you know if there will be any way to make the grip speak wirelessly to the gimbal, lidar and DJI motors? Seems like a limitation that the grips needs to be hard-wired to communicate with anything. Perhaps that wireless link could be done via high-bright monitor, so it performs similarly to a R4D handgrip, but with the ability to control lidar via the grip's touch-screen and also be more affordable than 2 x R4D grips?
It's good that you can use the DJI TX/RX combo for the RS4Pro, instead of the ravenEye. Using the Ronin 4D monitor as the receiver to pull focus comes in handy as well. Seems like there is a lot more integration between DJI and Tilta. Thanks for the review Adam! 👍
Bestboy Adam I discovered a safety mount bracket today that works with the RS4 Pro. I will be putting out a video on my other channel in the next couple days, which I will send you a link too.
Adamie, czy Twoim zdaniem za pomocą obecnej w nim automatyzacji sprawdzi się przy braku drugiego operatora, można śmiało zostawić go podpiętego na jakiejś konferencji pod sceną, żeby śledził przykładowo prowadzącego na jakiejś ogniskowej typu 200?
Hej, myślałem nawet o tym żeby tego spróbować gdzieś na jakimś wydarzeniu live. Na pewno jest to jakaś opcja, niemniej nie próbowałbym tego z główną kamerą bo wystarczy że ktoś na dłuzej stanie w kadrze i Lidar zapomnie kogo śledził. Ogniskowa nie ma tutaj większego znaczenia bo Lidar sugeruje się tylko swoją kamerą, ale przy ogniskowej 200 może nie zawsze dobrze trafiać.
It's hard for me to describe it in %, but I think with a big heavy camera (komodo/pocket 6k pro or similar) it's in my opinion about 30 % better stabilization
Thanks for this very in-depth review! Question, will the older DJI LiDAR Range Finder still work with the RS 4 Pro? Will I have any cable/power management issues if I use the old LiDAR Range Finder+Transmission+RS 4 Pro?
Hi Adam, Love your videos! Does the DJI Focus Pro hand grip have hard stops on the focus wheel? Similar to the Tilta Nucleus M or does it spin continuously? Sorry I haven't been able to find any information online about that.
I was curious about the app - I wonder if you get waveform "top down" feedback via the app? I know ou have the high bright monitor so it probably didn't occur to check it out, but sometimes I use an ipad air for the ronin ap for additional controls and it would be really sweet if it did have the function! ... 2nd, I know the rs2 and 3 didn't have this simple function: you could do a timelapse w/ focus points programmed as waypoints, but setting up a tracking shot with waypoints you could NOT add focus points which was a huge missed opportunity. An example is you could setup a shot where you program pan and tilt from one character to another at different distances - but would be great to be able to program the focus too (which you CAN do for timelapse mode) I doubt rs4 changed that as it's not an immediately obvious cool feature. Cheers!
you know what, I haven't checked it out yet, but what you are talking about actually would be a great option. I will try to check it out as soon as possible ! Great idea !!
Kanał świetny każdy materiał ciekawy i zaskakujący. Znajdujesz imponująca ilość zastosowań dla każdego produktu który recenzujesz. Szacunek za profesjonalizm i prawdziwą zaradną kreatywność.
That is a Segway Ninebot. Great little unit. Knee steering control. Fine for lighter setups and a fraction of the cost of the full size Segway when modified for filmmaking. Love mine.
Excellent as usual Adam!👏🏾 A really good and concise run through! I shall definitely be looking forward to your follow up videos. Every time I watch one of your new product release videos, I always know that within six months I shall be spending more money due to your convincing arguments as to how much more creative one can be by using that gear!😂 👍🏾🙏🏾 🏴🇸🇪🇹🇹
Thanks Eugene !!! *🙌*( and apologize to your wallet from me ) :) But you can always be sure that I would never recommend anything that I would not buy myself !
just want to give a huge shoutout to this channel! It's the only one that's always up-to-date with the latest rig and equipment reviews. Your insights and thorough reviews are incredibly helpful for filmmakers like me. Keep up the amazing work! BIG FAN FROM MOROCCO✌🏼
@@adamhubalovsky4135Neither can I. Only currently selling old one which also happens to not be standardized on hole spacing making mounting quite difficult. Also would love if he did a detailed rs4 pro detailed larger camera build. I can't even get my fx3 with vmount required for hub to clear the arms, even a smaller 50 vmount sized one. Driving me nuts to get transmission system working with rs4 pro gimbal. Basically I'm limited to raveneye with canon AF.
@@prOkrEAt Hey man, they have just released it today! I've already ordered it with expected delivery date of 26/08 ! Can't wait to try promised features.
Hey @bestboyadam - I can't find this information anywhere, does the Ronin 4D handgrip knob rotate on its own in AMF mode the way the focus pro grip does when using the lidar module?
Amazing video, really looking forward to the next tutorials about the Focus Pro. I've looked into setting DJI LIDAR up on a shoulder-rig RED V-RAPTOR but this looks like the better way now. What do I need to connect the Focus Pro to the V-Raptor and DJI Transmission? The Focus Pro, a Focus Pro Grip, Focus Motor, DJI Transmission? And also a cable hub? Can I power the grip battery off D-TAP?
Thanks man! glad you liked the video. There are several configurations , but the simplest is focus pro grip, Lidar sensor, and FIZ motors. If you have dji transmissions then you only need Cable Hub , sensor and motors. Focus pro grip has its own dedicated battery (same as RS) but with Tiltaor DJI adapter you can power it from V-lock too.
@@BestboyAdam neither rs3 nor rs4 are listed as compatible on the site for that expansion thing which lets you put it on drones and car mounts and stuff. Is this what we’re talking about?
