No video :(

DLG Radio Setup on the Spektrum iX20

Подписаться 6 тыс.

Просмотров 12 тыс.

50% 1

Setting up a DLG on your radio can sometimes be quite challenging. Let's go through this step-by-step radio programming tutorial on how to set up a high-performance F3K glider (BAMF 2) on the Spektrum iX20 radio.
Download my .ispm file: bit.ly/bamf2ispm
ArmSoar: www.armsoar.com
ArmSoar USA: www.armsoarusa.com
BAMF 2 DLG (Kit): bit.ly/bamf2dlg
Deviant DLG (Kit): bit.ly/dev1m
Deviant DLG (Receiver-Ready): bit.ly/rrdeviant
My ultimate tool guide for DLGs: bit.ly/dlgtools
Resources / What I Use
KST X08 v5 Servo (International): bit.ly/kstx08v5
KST X08 v5 Servo (USA): bit.ly/kstx08v...
Wire For Pull Strings: amzn.to/3eykaO7
Crimps For Pull Strings: amzn.to/2QbSLta
5mm Gap Seal Tape: amzn.to/3v1d3UE
Kapton Tape: amzn.to/2QjwSIf
Spektrum AR410 Receiver: amzn.to/3n3BhLr
Spektrum iX20 Radio: amzn.to/3dwPcq5
FrSky GR6 Receiver: amzn.to/3gZV8Kf
FrSky X-Lite Pro Radio: amzn.to/3nMYtxY
I hope you find that useful! Just so you know, ArmSoar may collect a small share of sales from the Amazon links on this page. It does not increase your price but helps us keep making good content!

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@ArmSoar 3 года назад

What radio are you guys using to fly DLGs?

@user-ek5wk8pq8d 3 года назад

jeti ds12pro

@ArmSoar 3 года назад

@@user-ek5wk8pq8d sweet radio!!

@user-ek5wk8pq8d 3 года назад

@@ArmSoar I bought two BAMF2 and received them immediately. So I hope you can do a setup video for Jeti

@doversailplanes 3 года назад

I use a RadioMaster TX16s running OpenTX.

@factoryrollracing3847 3 года назад

I'm also using a TX16S, I use the AD5.1 DLG program as a template which has most of these features built in.

@michaelsell6928 11 месяцев назад

Clear as mud. Any videos for a total newbie? Like step by step, throws, etc.?

@ArmSoar 11 месяцев назад

Throws and settings will depend on the model. This video is to show how the iX20 DLG template works and provide the template for download.

@84westy55 2 года назад

If you could borrow a DX8 G2 and make the same video, I *promise* my first brand new DLG purchase will be from ArmSoar! It just does not translate backwards because the interface is so different.

@Scott_Hudson 3 года назад

Perfect timing! Received my Deviant a couple days ago, and will be using an iX20. Thanks for taking the time to put together this tutorial!

@ArmSoar 3 года назад

Good luck with the setup and maiden!! You’ll like the Deviant :D

@ianhu7981 3 года назад

Nice video about DLG in RU-vid. Hope more will coming up

@ArmSoar 3 года назад

More to come! Have a few more in the works already :)

@bryankrause4090 3 года назад

Thanks for the vid and your setup. I’ll try it on my ix12 and see how I go with my training dlg. I’m just starting out with dlg flying so all the help is really appreciated.

@ArmSoar 3 года назад

Welcome to the DLG family!!

@scott9054 3 года назад

will the ix20 file download and work on an ix12? Thanks

@bryankrause4090 3 года назад

It does, I have down loaded the file and checked onscreen and you can see everything working. I will now put a receiver into a plane and check it out.

@scott9054 3 года назад

@@bryankrause4090 thank you

@bryankrause4090 3 года назад

@@scott9054 it seams like the rudder is also working? Did you have that operational as I thought you said you had a non rudder dlg.

@keithdouglass3618 2 года назад

🐨🌏 i was flying old style tx.from 1970. moved to dx9. now ix20. was a bit perplexed. but play with it . soon became fun..Keith Australia

@ArmSoar 2 года назад

Such a great radio... I love my iX20!

@IvanMacKenzie 3 года назад

Basically impossible to "read along" on the radio screen. A lot of work I know, but an zoomed in inset would be helpful. 🤔

@ArmSoar 3 года назад

Thank you for the feedback! We’ll see how we can make the next ones easier to read along :)

@mori-patte Год назад

@@ArmSoar Totally agree with Ivan. Technically it's should be possible to mount lightweight camera (GoPro for example) on to transmitter using strap mount on transmitter and some kind of mount or lay transmitter straight and zoom in screen and button part of video.

@paulgross4789 3 года назад

Excellent

@ArmSoar 3 года назад

Thank you Paul! Hope to see you in the air with the Deviant soon :D

@keithdouglass3618 2 года назад

🐨🌏 well explained. happy with my ix20. Keith Australia

@MilesofBeard Год назад

Would you ever do a x9d dlg set up from beginning to end. I have not found one person to demo it and i think the video would be very popular. I’m someone my self who has been completely stuck with a 1M that i have not been successful loading a model preset and be able to adjust it to work for my dlg. If i could afford a spectrum i would have and just followed this video because you have the best videos!

@Dennis_le_Berger Год назад

Thx for the tips

@xtraflyer 3 месяца назад

Is the template still available? the link doesn't work anymore.

@tariqyounus3880 Год назад

Hi dear do u have , same settings with radio master t16 ??? Any video which help for those who have radio master t16.

@ArmSoar Год назад

No, sorry

@scott9054 3 года назад

I have my brakes set on the throttle stick. The stick is all the way up but when I pull it back they dont start moving until I hit half throttle . Not sure where to fix that.I am using an ix12

@ArmSoar 3 года назад

In Camber Systems you'll need to set values Ail values for both the Up and Down boxes. I'm guessing you only have a value set for the Down box?

@scott9054 3 года назад

@@ArmSoar in camber systems I have -100 down. And 0 up. I tried playing with those numbers this morning and couldn't get it right. Ill try again later.

@kniahaxel Год назад

Alternative is to Set the offset in camber System to 100 or -100 when only using down Stick travel

@davidrubin22 2 года назад

Thank you for the information...and thank you for the .ispm file. However, I cant figure out how you assigned flight mode switch 1, to speed B? Would you be willing to explain how you did that?? Thank you again in advance.

@samgibson9153 2 года назад

Hey Thomas. Getting into dlg and have spektrum DX8 gen2 . But can't seem to download your file. Is it still available? Finding your videos brilliant to help me along thank you

@84westy55 2 года назад

Previous generation transmitters can't use NX config files.

@banko444 3 года назад

Thomas, what are the 5 percentages you have set on your 5 point curve for your flap to elevator mixing? I’d like to match. Thanks!

@ArmSoar 3 года назад

You can use it as a starting point but it'll likely be slightly different than what you'll end up needed since each model is set up differently: 0.0% 18.0% 30.5% 40.0% 43.0%

@banko444 3 года назад

@@ArmSoar excellent Thomas thank you. I’ll start there and tweak it of course.

@ianhu7981 3 года назад

Futaba 18sz, jumper T18

@pedrogodoycruz 2 года назад

How can you set aileron travel limits? If you limit travel to have reasonable limits to the ailerons (+15mm, -10mm) it also limits the flap deflection. To have proper brakes, aileron down deflection during normal flying is way too much. I cannot find independent limits for aileron and flaps. NX10 and DX9. Both are the same.

@ArmSoar 2 года назад

You can use differential to adjust the aileron movement.

@pedrogodoycruz 2 года назад

@@ArmSoar thanks! Way simpler than my mixes flap-to-aileron that only sort of work. 30 years flying rc airplanes and still learning 😁

@scott9054 3 года назад

will the ix20 file work if i download it to my ix12? Thanks

@ArmSoar 3 года назад

I haven’t tried that, but yes, it should work.

@scott9054 3 года назад

It worked. just a few tweaks here and there and im all set. Thanks again

@billcarney993 2 года назад

Have the DX9, how do I get your ispm file loaded into the DX9

@ArmSoar 2 года назад

I think the DX9 needs spm files (no ispm support), although I could be wrong...

@ChrisForceFoodShow 3 года назад

which battery pack is that?

@ArmSoar 3 года назад

Hi, that's a Turnigy Nanotech 650 mAh 1S pack. Unfortunately, it's discontinued.

@Chris-forceDe 3 года назад

@@ArmSoar THX

@hoah 3 года назад

Can someone please show us an optimum setup on a normal person radio? This is a 1400 dollar transmitter.

@ArmSoar 3 года назад

Sets up just the same as a $300 NX6, same menus just slightly different layout.

@IllFlyIt 2 года назад

@@ArmSoar my NX8 doesn’t have ele or flaps (ailerons) in the sequencer menu. Only have AUX1, AUX2, and GEAR. Still unable to get an answer from anywhere about how to get my sequencer to work to program a launch mode. 🤷🏼‍♂️

@ArmSoar 2 года назад

@@IllFlyIt Have you tried RC Groups -> Radios subforum? Andy from Spektrum spends a lot of time there answering questions.

@84westy55 2 года назад

Man, HH has jacked up the price by $300 in a year. It's now a $1,699 transmitter.