DO THEY FIT? Pt. 1

Подписаться 388 тыс.

Просмотров 90 тыс.

50% 1

Previous Video ▶︎ • How to Install a Weld-...
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯
In this video, I test fit my new wheel setup for the Accord. This year I’ll be running a square set of 18x9+35 Enkei RPF1’s with 265/40R18 tires, square. Last year I was running staggered which didn’t allow me to fully rotate my tires, so the fronts wore much faster than the rears. This year I can switch them up from front to back.
So as mentioned in the video, before actually running the new wheel setup on the car and getting them dirty for the first time, I cleaned them up and ceramic coated the painted surfaces to protect the perfect finish on them. If you buy a set of wheels that are brand new, this would be the ideal time to ceramic coat the paint.
I’ve included the products that I used in the video, down below. Feel free to check them out!!
Meguiars APC ▶︎ amzn.to/2mDKTQv
Hog Hair Brush ▶︎ amzn.to/2lLZDsp
Turtle Wax Tire Shine ▶︎ amzn.to/2lqwJC6
50 ml Ceramic Paint Coating ▶︎ amzn.to/2m61r0p
18x9+35 RPF1 Wheels ▶︎ amzn.to/2m8eujH
235/40R18 Hankook RS3 ▶︎ amzn.to/2mFcRM0
The link to the tires above was as close as I could find. Mine are 265/40R18, which are 30mm’s wider in section.
If you have any questions, feel free to send me an email at milanmastracci@gmail.com. Thanks for watching!! :)
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯
Please give it a like 👍 and follow 👣
milanmastracci RU-vid Channel ▶︎ / milanmastracci
milanmastracci Facebook Page ▶︎ / milanmastracci
milmast Instagram ▶︎ / milmast
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯
End Screen Links 🎥
READY TO ROLL!! Well, hopefully not.. ▶︎ • How to Install a Weld-...
GOT NEW WHEELS FOR THE ACCORD ▶︎ • GOT NEW WHEELS FOR THE...
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯

Авто/Мото

Опубликовано:

6 мар 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 209

@P71ScrewHead 3 месяца назад

"Went for a meaty fit".. The kid inside me quickly, "That's what she said!!" lol..

@thedude_underyourbed 7 лет назад

i feel like you're just like me haha, you get excited when something is dirty just so you have an excuse to clean it up and make it looks all nice and new. Thanks again, love your videos!

@milanmastracci 7 лет назад

Cheers buddy!! Detail whores ;)

@chinafukr69kack31 7 лет назад

I'm so glad u don't like the cambered look. thought I was the only one

@milanmastracci 7 лет назад

Not camber here :D

@MrRangerZr1 7 лет назад

No more rice life, switched to race karrrr life lol

@dannesito304 7 лет назад

rolling and pulling fenders, can't wait!

@Mr.SparkleOG 7 лет назад

Excellent choice on the tire shine and ceramic coating!!! I fell in love with the turtle wax tire shine the first time i used it!!!

@milanmastracci 7 лет назад

Yeah its great stuff!! :)

@thetraindriver01 7 лет назад

Nice vid, I'm glad you took it well when they didn't fit as first, that was funny :-) ready for the next vid now, thanks for the upload.

@milanmastracci 7 лет назад

Thanks bud!! I'll make it work lol

@NarutoUzumaki5678 7 лет назад

You gotta widebody the accord now Milan xD Keep up the great work my man!

@milanmastracci 7 лет назад

LOL that'd be funny!!

@johnisfy 7 лет назад

Great video bro

@milanmastracci 7 лет назад

Thanks buddy!!

@stiliqn007 7 лет назад

Happened to me when I got my 7,5x16 rims. They were hitting the brakes, but I grinded just a bit of the brake frame to make it go by without hitting. If there's still problems, I might go 3mm spacers too

@juvenalnajera727 7 лет назад

Love your videos bro!!

@milanmastracci 7 лет назад

Thanks buddy!! :)

@juvenalnajera727 7 лет назад

milanmastracci pretty cool how you take your time to reply to your viewers. Not alot of people do that.

@justyncrownover2901 7 лет назад

looks sick man!!

@milanmastracci 7 лет назад

Thanks buddy!!

@Maspaitella 7 лет назад

Yo that looks mad!

@Wrenchlife604 7 лет назад

accord love. hope the fittments ends up working for you

@L-Noble.YT_Hi.Res-Soundminds 4 года назад

You can still get a nice look with 255 40 18 so you will have more room and not have to roll or pull the front fender as much. If you can get the 265s to work then thats gold. Love the set up, looks better than 19s imho and it will ride better.

@zAvAvAz 2 года назад

looks great

@abiamiamab9677 4 года назад

Love your videos . You are gifted.

@chrisfitch7555 7 лет назад

I'm not sure if you planned on using ARP extended wheel studs or something else but 96-97 Acura TL studs fit 8th gen accords. Dorman part # 610-360.1 this will get you 6mm longer studs. Worked great for my 10mm spacers. Some grinding will get them installed without removing the wheels bearings.

@williancastillo5626 7 лет назад

Hey Milan , what do you recommend for my 2008 Lexus is250 . Wheel wise ?

@666Seb87 7 лет назад

"that moment when you breathing so deep because something ain't right" 🤗🤗🤗

@milanmastracci 7 лет назад

LOL

@greeenteeee 7 лет назад

ran into this same issue on my RSX-- tested my gf's 17x8 and 9 RPF1 in SBC. 9s need AT LEAST 10-15mm for me to fit the Brembo, the 8 clears just fine but is sunkkkk lol.

@sirajaxious3522 7 лет назад

awesome vid bro quick question any suggestions for battery jumper packs for quick car jumps?

@Amir.z32 7 лет назад

Perfect timing as i'm also looking for tires for my new wheels! Not sure if I should go with a 265/35/18 or a 265/40/18. What tire sizes are these that you are putting on? Just so that i can have a visual reference

@Amir.z32 7 лет назад

Never mind, just saw the description! 265/35/18

@ohSpectrumHD 5 лет назад

Hey Milan, how would a 255/35 look on a 18x9 +20 ?? Thanks and keep up the great content. 🔥🔥🔥

@muhammadfurqan7815 7 лет назад

bro the wheels r looking so dope!

@milanmastracci 7 лет назад

Thanks man!!

@ClaudioArrau 4 года назад

O.C.D you said, but the right one is facing the wrong direction xD

@milanmastracci 4 года назад

The right what? Both wheels are on the proper side, and both tires are pointed in the correct direction.. I'm not sure what you're referring to

@Niko2515 7 лет назад

yes fender pulling vid! i have a similar issue with my wheels

@OmarRodriguez-fm4vh 7 лет назад

why brembos and slicks? are you planning on adding some power to it?

@101mg 7 лет назад

can you post a link on where you got the tires for that cheap? im also in ontario

@ZynovFTW 7 лет назад

Can you do more detailing videos when the weather gets nicer?

@milanmastracci 7 лет назад

You can count on it :)

@MattyHutchison 7 лет назад

Hey, love your videos! Where do you get the Meguiars in bulk jugs in Canada? I can't find them anywhere

@milanmastracci 7 лет назад

Yeah I haven't been able to find anything reasonable in Canada. What I did find was outrageously expensive..

@babyjoker360 4 года назад

Is it safe to run both of those 5mm spacers on top of each other?

@jojodeleon2602 5 лет назад

Will a 19"9.5 40 offset fit all around the car

@stoneyswolf 7 лет назад

Those wheels look huge on that. I got 18x9s on my chevelle with 275 40s and it looks like it should have come that way from the factory.

@KECIKKCHANNEL 6 лет назад

hey man, can you help me . i got a 14 size wheel and i want to change to 17 inch . whats you think ?

@mariogonzalez2805 7 лет назад

What should I use to clean mat black str rims, I don't want or ruin them

@alanOHALAN 3 года назад

35 off set is the same but the spokes are thicker in proportion to the bigger rim size. Also the wider rim is designed for rear wheels, for a staggered set. Rear wheels have smaller breaks, no problem, but you can't have them as front wheels. Time to get RWD car.

@ashdeepchahal538 7 лет назад

Would this set up fit the oem break calipers?

@Rhino5.0 5 лет назад

What do yall recommend on my 2006 g35 coupe

@johnmendoza592 7 лет назад

Great video, I need help @millanmastracci. I have a corolla with tires 215 45 17, I dont know whats the maximum with I can go for 17 inch rims and what size for an 18 inch rims woth out using spacer thanks

@JFRECKELZ 7 лет назад

How many coats did you put on those wheels ??

@milanmastracci 7 лет назад

I did 2 coats of the cquartz and then 2 coats of the Turtle Wax tire dressing :)

@JFRECKELZ 7 лет назад

milanmastracci thanks !

@zevach17 7 лет назад

Just with rolling fender and its going to be perfect!!!

@milanmastracci 7 лет назад

We'll find out ;)

@blackterryknight 7 лет назад

you need like a +30 and lower offset to clear your big brakes

@flowremix 7 лет назад

wheels look great, how do you feel about flares? against them?

@milanmastracci 7 лет назад

Depends on the car. Ideally, if you're just looking to make a set of wheel fit because of slight poke, a fender pull & roll should do the trick. But if you're looking to go wide body, they're great. My only thing is if you're going to go wide body, don't go wide body just to fit some 'stance' super wide wheels. I find the point of it is to get more traction, kinda like what I'm doing with the Mini :)

@flowremix 7 лет назад

gotcha. function > form

@milanmastracci 7 лет назад

Bingo :) That's my opinion on it. I don't find the logic in spending lots of money, to make your car handle worse than stock.

@pavlo5.055 7 лет назад

how many coats of tire dressing did you put on the brand new tires?

@milanmastracci 7 лет назад

2, with about 10 minutes between each layer

@Nick-sv9lk 7 лет назад

You don't know poke until you see my cobalt!!!

@thomastrotta7859 7 лет назад

Might do the cleaning to mine too. 😁

@milanmastracci 7 лет назад

DO IT ;)

@MarkoDaPrynce 7 лет назад

You think that Turtle Wax Jet Black stuff would work on Plasti Dip? Tired of my rims looking like shit after it rains lol.

@GurdeepxSingh 7 лет назад

Not sure if you plan on pulling and rolling the rear quarters as well but you should definitely roll that edge in or it will rip your tire up!

@milanmastracci 7 лет назад

Oh 100% :) When I get the wheel studs and spacers, I will see how much adjusting I will have to do

@TRusty394 7 лет назад

hi Milan great videos ! will you do a heater matrix fix on the golf? Its a very common issue on these cars. Thanks !!

@milanmastracci 7 лет назад

Until I have that problem with the golf, I won't touch it. If it ain't broke, don't touch it ;)

@TRusty394 7 лет назад

Agreed! Thanks for the content Milan and keep it up :)

@milanmastracci 7 лет назад

Cheers buddy!! :)

@kiwto1 7 лет назад

Very nice, I got me some hankook 24535r20 for my accord.

@milanmastracci 7 лет назад

That's awesome!! Im looking forward to see the grip difference

@CarlosUbando 7 лет назад

Im throwing 18x9 plus 30 on my mk4 Jetta this month 😁

@milanmastracci 7 лет назад

That's exciting!!

@maeenulislam1556 7 лет назад

Hi need links to buy racing gloves..

@bogdananghel9480 7 лет назад

do you guys think those 5 mm universal spacers (like minute 7:05) are safe? i have 20 mm spacers on back and i need 5 mm for front to sit exactly like the back wheels. so, are they good enough? or should i go for something more expensive. i can buy those with 10 $ both of them.

@milanmastracci 7 лет назад

I personally wouldn't use them. I only had them because I was just testing what size spacer I needed. You ideally want a set of hub centric spacers, so the wheel is properly set on the hub.

@bogdananghel9480 7 лет назад

Thanks !

@anada6923 7 лет назад

when is going the video for the widebody for the mini?

@milanmastracci 7 лет назад

As soon as I get the wide body kit.. Trust me, if it was up to me, they'd be on the car already!! :)

@jeshuaaponte3501 4 года назад

U think this size will be fine on a 8th gen civic si?

@milanmastracci 4 года назад

I doubt. I'd stick with 17s on a Civic, and do some measuring before buying aftermarket wheels.

@christiancuevasmusic 7 лет назад

Is your motor stock?

@WoooonTC 7 лет назад

Does it mean that you need ET65 wheel to have enough clearance and at the same time push the wheel inside?

@milanmastracci 7 лет назад

Not quite 65, but the higher the offset, the more the wheel will be sucked into the wheel well. On the other hand though, where I ran into a problem is calliper clearance.

@christopherpirri7973 7 лет назад

You had the wheel where you your old wheel where you wanted it. You new wheel is an inch wider. You should have added 12.5 to the wheel offset. half the added inch of the new wheel. and it would fit in the wheel well and not have to use the spacers.

@triniwarrior16 7 лет назад

Where is tire rack? Can I go to the store and buy it there?

@milanmastracci 7 лет назад

Its an online website where they sell tires, wheels, and lots of extra stuff. Google it :)

@finngurgens3264 7 лет назад

haha I use the same tire shine. stuff's amazing. props to turtle wax

@milanmastracci 7 лет назад

Yeah no kidding man!! Its great stuff :)

@DeejLux 7 лет назад

Does the offset matter when getting new rims? I just wanna get the same size as oem will I still be able to use the old tires?

@milanmastracci 7 лет назад

The offset makes every difference on how the wheel will look and fit, along with the face design.

@GurdeepxSingh 7 лет назад

Check out willtheyfit.com it helped me a lot!

@sridharbhaskar7605 6 лет назад

How much offset can be varied so that we stay close to the OEM setup?

@Synthwave89 4 года назад

You remind me of Veritasium of the car world.

@lahzu1748 7 лет назад

Bro I have a 2011 Accord Coupe. Do think its possible to use the 2009/10 grill? And I literally can not find anyone that can wrap the reflectors of my headlights lol

@milanmastracci 7 лет назад

Hey man! Unfortunately because the front bumper is different for the 2011-2012, the 2008-2010 grills won't work with them. You'd have to do a bumper swap.

@lahzu1748 7 лет назад

milanmastracci for sure. Also, I literally put on brand new brakes about a month ago with new hardware and when I first apply my breaks when I'm pulling up to a stop sign I'm hearing a crank/popping noise. Any ideas to what it is? I took it to Honda and they said it was normal. I laughed cause that's BS my other Honda doesn't even do that.

@christopherpirri7973 7 лет назад

That happen to me when they forgot to put the break grease on the piston pad surface. The pad would stick to the piston until there was pressure. The sound you hear is the pad moving (braking loose from the piston) on the piston.

@lahzu1748 7 лет назад

Christopher Pirri for sure. It's been driving me crazy bro. It's a nasty sound. Thanks man!

@sadakotube 7 лет назад

that feel when your wheels don't fit lol

@milanmastracci 7 лет назад

It was disappointing, but no big deal :)

@pnojazz 7 лет назад

Love your channel! Bummer about the first fit - Did you measure the tire/wheel via an online tire/wheel calculator before purchasing the set? www.willtheyfit.com/index.php?width=225&aspect=50&diameter=18&wheelwidth=7.5&offset=45&width2=285&aspect2=35&wheel_size=19&wheel_width=10-0&offset2=41

@anonymousmind 7 лет назад

I want to see videos on the Mini!!!!!!!!!!!!

@milanmastracci 7 лет назад

If you can get my school work done for me, I'd love to ;)

@anonymousmind 7 лет назад

milanmastracci university is bullshit! Get on that RU-vid full time once it's grown to a comfortable amount! Why get in debt for so called education?

@Bitaliktderr 7 лет назад

Go with fender flares bud!

@ScottPC 7 лет назад

The noise of the wheel smashing into the breaks.. needs a repaint now!

@denniscarparts2294 5 лет назад

Why is everyone claiming to have O.C.D ? Yall should have been riding on the short bus in school. 🍀👀🍀

@tarek3702 7 лет назад

shared and liked ur video

@warden6808 7 лет назад

Man, I think the black rims looked better, but to each their own.

@GameTVAlperen 7 лет назад

That mini-bike caught my eye. Can you make a video about it

@milanmastracci 7 лет назад

LOL I love that thing!! I use it every week to take the garbage out to the street ahah

@GameTVAlperen 7 лет назад

milanmastracci Hahaha i also have a 50cc one but i won't start. I tried every thing and it still doesn't work. I think i need a new ignition or a new sparkplug.

@milanmastracci 7 лет назад

I had a similar problem last year. I got a new spark plug, rebuilt the carburetor, and she runs mint now ;) I even put 100 octane low lead in there for some extra power ahah

@GameTVAlperen 7 лет назад

milanmastracci Hahaha i can't wait for summerbrake so i can work on it again. I'm very busy with school now.

@grinbeefive4169 7 лет назад

Oh i just asked you about this wheels i think this one looks better

@milanmastracci 7 лет назад

Yeah I like the flatter face, but because of it, it doesn't fit like the convex ones

@antmontana2753 7 лет назад

A I've never asked where is it that you came about learning all of this about cars?

@moisestheentrepreneur637 3 года назад

I still don't know why people get such wide wheels for simple econamy cars lol I understand if you have alot of HP but people can go smaller width & little bit smaller tire width also & avoid weight

@alanOHALAN 3 года назад

for looks and cornering plus acceleration, at a cost of fuel economy.

@dankshiz69 7 лет назад

Haven't you said that we should NOT double the wheel spacers?

@milanmastracci 7 лет назад

Absolutely!! But i'm only doubling them to see what size I need. I wouldn't dare drive with them like that

@alikemalsultan.ferrari 7 лет назад

No more tires,but bmw ///M5 the mines because ;)

@brandon6242 7 лет назад

j.k the cars sick

@TheInspiringKhan 2 года назад

If you see some one who sounds American but talks in millimetres is a Canadian.

@twowheelsr6 7 лет назад

What kinda of lug nuts are those?

@milanmastracci 7 лет назад

I have these steel silver ones (amzn.to/2mydG8n), but you can also get different colour like these (amzn.to/2myheHC).

@twowheelsr6 7 лет назад

milanmastracci thank you, mate. I just got my wheels and tires for my honda accord, so i need some lug nuts.

@ii-soldier-ii2823 3 года назад

Those are real Brembo????!

@danielalvarez959 7 лет назад

do over fenderds

@triniwarrior16 7 лет назад

Stretch tires😈

@milanmastracci 7 лет назад

Yuck lol

@IliescuBenyamin 7 лет назад

if you use a 10 in the front you would need at least 25 mil in the back to be flush.

@tarek3702 7 лет назад

milan aka the money man

@milanmastracci 7 лет назад

LOL

@infernalGotYou 7 лет назад

What a surprise.. heard 3 times there is lube on them.. repeat mode engaged again my friend?

@milanmastracci 7 лет назад

Relax 😘

@infernalGotYou 7 лет назад

milanmastracci I really love the videos but can't stand the repetition, makes me feel like I'm treated like a todler or something, I will not ever bring this up again if you watch this video again and objectivly look for the many many repetitions..

@milanmastracci 7 лет назад

When making the video, I don't see it, but I do see what you mean when I go through the editing stages. I honestly will try to keep the repetition to a minimal :)

@infernalGotYou 7 лет назад

milanmastracci you're a bloody legend! Looking forward to watching the next video!

@han07013 7 лет назад

painting the writings white gives it a sexier look

@chinafukr69kack31 7 лет назад

CJ not all the time, on highly modded looking cars yes.

@milanmastracci 7 лет назад

Yeah I contemplated it!! I might do it for the mini's tires

@han07013 7 лет назад

Ngoc Lai it looks good on any car (modded or non modded).

@han07013 7 лет назад

Ngoc Lai but better on rally cars.

@headly24 7 лет назад

im surprised u didnt clean the car first since u mentioned ur OCD.. lol.. other than that the wheel looks awesome.

@milanmastracci 7 лет назад

Welcome to the canadian winters lol wash your car 1 day, the next, your car won't look like you washed it at all.

@christopherpirri7973 7 лет назад

That happens anywhere. I wash my car once a week. I like to have a clean car to. It always rains or snows after I wash my cars.

@rodrigocruz4157 7 лет назад

FENDER FLARES

@williamneigum7002 7 лет назад

always test fit rims lol

@milanmastracci 7 лет назад

I would have loved to, but I didn't have access to them..

@blubase06 7 лет назад

now you need a wide body kit

@hermonbasil9263 7 лет назад

yes yes yes ..fender flairs atlest !!

@WelshyAutomotive 7 лет назад

Rolling them is perfectly fine, but yea it would be dope.

@michaeljubran24 6 лет назад

Lmfao I legit bought these wheels and tires from someone this year.

@milanmastracci 6 лет назад

Who did you buy them from? :) Guy with a silver Evo?

@michaeljubran24 6 лет назад

sorry just saw this! Yessir, you know what they look like now :D

@keeanhos7289 7 лет назад

Its called bead sealer

@chrissorial2957 7 лет назад

No disrespect man, but the just put the TSWs back. They made your car look so classy and it was an OEM+ look. Car is gonna drive like crap with spacers and you already have a track car.

@milanmastracci 7 лет назад

I didn't mind the look of them, but I wanted some change. With the TSW's being 19's with low profile tires, I didn't like the harshness of the ride. So going to an 18" lightweight wheel with some meaty tires, the ride should be awesome. How does spacers affect the drivability of the car?

@4G12 7 лет назад

Spacers actually affect the suspension geometry of a car, sometimes to quite significant degrees depending on the exact design of the car. For instance, for a car with a rear multi-link/wishbone suspension, your effective wheel spring rate would be slightly reduced because of the decrease in motion ratio caused by the wheel being spaced further out, effectively lengthening the lever arm. Of course, the longer the suspension arms, the smaller the effect due to reduced change of lever arm length %. For the front suspension, the effects are much more complex. Of course, you still get the reduction in wheel spring stiffness like the rear suspension. Your steering geometry would also be altered, since the more spaced out wheel would increase positive scrub radius (or reduce negative scrub radius if OEM geometry was designed as such). The net effect, assuming the car had +ve scrub radius to start with, would be greater steering feel, at the cost of greater steering effort and greater tendency for single wheel bumps to create steering kickback. Conclusion? I would only use spacers if forced to do so to solve clearance issues or to deliberately increase scrub radius for a car that could benefit overall from such a steering geometry change. All that said, I am glad you went for a much more functional set of wheels that would actually improve overall performance, improving both handling and comfort. I am not a fan of ridiculously oversized rims with rubber band tires. Suspension requires compliance to generate grip, especially on the less than perfectly smooth terrain in real world conditions.

@mikehamilton5854 7 лет назад

Oh my lord that wheel set is sexy. so much thick, many wow

@silvias13freak 6 лет назад

I thought this was a car video. Where is the car?

@Doggepp 7 лет назад

Double stacks of "loose" spacers is the worst thing you can do. Especially without extended lugs. I have had three friends, all had the spacers crack and wheels fallen off. Please get 10 mil bolt on spacers before you lose a wheel.

@milanmastracci 7 лет назад

I agree with you 100%. I just tested to see the size that I would need to clear the callipers