Thumbs up for the Turkish boat building industry.Spearheaded by a hardy Englishman, engineers, technicians and infrastructure to support everything boating is something to be proud of for a sail boat owner (Turkish merchant mariner) like me. You can see the Kraken 50 is a boat you can take to circumnavigate the world without any doubt in your subconscious. Again a great video as usual from a very likeable family. Enjoy Turkey and thanks friends..
Whoever thinks that it is just “cheap / competitive labor near water” is a near-total ignoramus, and I kindly invite them go and build one anywhere they want in the world with “cheap labor near the water” (and that is a lot of coastline). Turkey has experience building all kinds of boats that most competitors do not, coupled with the best machine manufacturing and the strong industrial base for accessing the semi-processed materials you’d need in boat-building AND the super skilled shipbuilding labor to enable you to bring these together in a boat that will cross oceans. With all things into account, the difference in the cost of labour can even look marginal at the end, hence boats built in Turkey are not even that cheap. Seriously, do some research before embarrassing yourselves like this.
@@clintonstewart4786 such a lame comment! "Ignorance is an enemy, even to its owner. Knowledge is a friend, even to its hater. Ignorance hates knowledge because it is too pure. Knowledge fears ignorance because it is too sure" S. Chinmoy
Eliminating propane is so practical and such a future-proofing aspect. Two or three years ago, SV Delos got rid of all their propane too. Mostly it was motivated by eliminating the irritation of finding new adaptors for each country, but also for increased safety. That was combined with a more capable electrical system which supported induction burners all around. Probably for the oven too. The cup holder gave me a chuckle. I have no doubt the yacht industry is placing lots of flashy accouterments all over that do nothing to improve the safety and seaworthiness of their vessels. It is really refreshing to hear of a boat builder who makes the safety and durability job #1!
One of the best Kraken videos. Kraken looks great inside too, unlike the many IKEA-feel boats others make. About no-gas: Worked on an older boat, tearing out the gas installation; we found hand-tight, almost loose fittings (on copper tubing), tucked away up in a cupboard.
What an absolutely fabulous sailboat! This video was put together so much better than 99% of all the other sailboat tour videos I've seen. Dick is not only a boat building genius, but he's also a great man who obviously loves life and cares about the people who sail in his boats. Thanks so much for introducing him to us.
Of all the blue water boats out there this is the one that excites me the most. You know the saying that if I win the lottery I won't tell anyone but there will be signs. This would be one of them. It's just such a well thought out boat.
Bird in the hand…you sold me on you Atticus II. Dream on but stay grateful for what you have. Glad Desiree came up with the “but Atticus II is our home” statement. Probably not a great thing for a sailor to say but “stay grounded”. Enjoy the laurels of your hard work (no small task!) getting your current boat exactly the way you want. Your mental health will thank you. Have a great day, and enjoy your adventurous spirits!
One of the best 30 minute Kraken videos I've seen yet. This felt like a very "personal' boat review, for lack of better word - and anyway, all the nitty gritty specs are on the website. It’s also Dick Bowman's warmth towards people. He's become one of my favorite salty dogs in the community, and the fact that he's now building these beautiful boats is such a wonderful contribution to the market choices out there. It really feels like he's brought his 'A' game 💯 and thought of everything, based on his extensive sailing experiences. You can feel his heart and soul in the design. I hope he writes a book about how he gathered up all his experiences to build this smart, stout and work-of-art blue water boat - totally 'pimped out' ;-)
I just realized why I like you guys and your channel…. I really feel comfortable with your videos, the style you both use for delivery of your message and your honesty. I also liked Dick’s closing statement,”…….. Don’t die saying I wish I would have done this…”
Didn’t think you’ld manage to leave Turkey without stepping on a Kraken! Good to see Dick doing so well, one of the very few people putting together a boat for proper cruising.
I had enjoyed the interview with Dick by Mil.Falcon awhile back (also nicely done) The Kracken is definitely a boat that sets standards higher than much of the current main stream production yachts. You guys would definitely enjoy the upgrade--but as you said, your needs are currently met with what you have Thanks for another great production
In early times, Dick would be the royal shipwright. That gentleman means business. That’s why he established it in Türkiye. High quality labour would cost a fortune elsewhere. And this is a solid boat. And… did I say that you guys are adorable? ❤️
Thumbs up on the aeropress plug - nicely done, and it's the first sponsor bit in a sailing video that doesn't go on and on and i have to skip past. Thanks for keeping it short and to the point. Actually made me want to get one!
It is nice to hear that Kraken is expanding its operations to Poland. The city of Szczecin would be a good choice not only because of the skilled labor, yacht building traditions but also a convenient location (Proximity to the Berlin Airport), etc.
One question though - most chainplates fail not as you described it (the paper clip analogy), but rather because the holes into which the standing rigging lines connect to grind away over time and become oval in shape until they eventually break from just getting too thin at the "eye" part that connects it to the line. Another common failure happens when you encase stainless steel in something that prevents oxygen from getting to it, which can lead to "crevice corrosion". When that happens - you need to (and in most boats - you can) replace the whole chainplate. How do you do that with the chainplate being fully embedded into the fiberglass hull like it is in the Kraken?
Mr. Kraken was brilliant!!! A very smart team by having you detail his boat. Your descriptions were perfect....I'm SOLD!!! BTW, your daughter is cuter by the day....
I guess I have a new dream sailboat now. Dick seems like an awesome, honest, down to earth man too. What an accomplishment to even build a single boat like the Kraken, much less an entire production line of tanks!
Great video explaining and detailing the brand. While it may not be in your budget yet keep on grinding away and focus on how to achieve your goals of obtaining one in the future.
One point I truly appreciated below deck, and there were alot, was the finish on the wood wasn't hyper glossed. That finish just ruins an interior for me. Safe is sound is serenity. Great job on that vessel.
I'm not a sailor at all, never done it, probably never will. This chanel shows the open minded aspect that may build the drive to. I'm far more familiar with motor homes & living off grid on land. I'm very entertained by this channel & can put some of what I've learned from here to motor home style (of grid living) exploration. Luv you guys & looks beautiful through & through.
What an absolutely beautiful boat. We had a 52’ Erwin ketch that we loved and lived on for a few years in the 80’s. I’m 60 now and crippled up now but I would get the K-50 because of the ease of piloting, safety, and beauty! My gawd that thing is beautiful! Soon as I get the $… Ima get him to hook me up. Oh ya, thank you for showing this video. I appreciate it.
I must admit that, by and large, boat tours bore me - mostly because I'm not in the market for a salboat. However, this one worked for me and I thoroughly enjoyed it. That little girl is growing at an alarming rate, too!
This was an amazing video. The factory walk thru and the detail in which a Kraken is built with, shows if a monohull is the way to go...This is the boat to buy. Thank you for presenting this.
"The best size boat for you is always 5 feet longer than the one you own" That Kraken is to Atticus II what Atticus II is to my boat. I found myself extrememly jealous when I saw what you ended upgrading to. Since then though I remind myself that with extra length comes extra cost and is harder to maneuver etc... At the end of the day my little 32 foot cutter from the 70's is tough, safe and exactly what I need. If you can afford a Kraken, send it. If you're like me, remember to be thankful for what you have! There will always be nicer boats but to someone, what you've got is their dream.
I love your wrap up, I and many people appreciate a team of people working to make an excellent product! This video has made me a Kraken fan, I love their attention to detail. Thank you Jordan and Desiree for your tour, it's fun seeing how you enjoy certain aspects because of your real life experiences! Great video, thank you. I also love that your boat, with all the work you've put into it, makes you happy to return to!
I personally thought the entirety of the video was excellent! I didn't skip anything I was engaged in every aspect of it. The kraken 50 was the first sailboat that I have ever seen that I just was extremely impressed in! I've never had any interest whatsoever in a sailboat but that one was very impressive. your personal sailboat was surprisingly nice as well! And yes if I were looking to purchase a sailboat I would definitely get the Kraken50.. number one for the safety which is of extreme importance to me but the comfort at my age is something that can't be ignored as well. Great video
Highly educational! 1.6 Mil boat with all the bells & whistles is truly exciting. And his right being sea worthy is #1. Also it has all the comforts of a cat boat but in a single hull. Home is were ever ya find it, Aye!
What a absolute awesome episode, you guys did great reviewing the Kraken and I hope to see you one day sailing your own. And I hope to one day own my own.
Wow what a great episode, love how they over built everything on Krakens. Not to nit pik did anyone else notice how the rudder sticks below the support skeg? That would be the first thing to grab the bottom, I'm sure there's a reason.
I’m in love 😍 I now know what I’m buying. Excellent saloon design that is really tall for a 50 ft boat. Cheers on the video as well. A walk through that flows like a conversation and thank God you guys don’t open every drawer and storage space. You got a new subscriber, and Kraken just won a client. ❤
Access to equipment and systems: to me, tinkering with, checking on all the many systems is one of the things I really like about a boat - IF they are accessible! Thumbs up, Kraken. It is frustrating when something was installed unnecessarily hard to reach, often just cosmetic.
When you have a family.....safety is EVERYTHING.... better to pay more and have safe boat. I know you would buy Kraken if you could effort it. But maybe one day! 😃 This is my first time on this channel. And I liked the educational part of it. So I will stay subcribed
Best solution to prevfnt mast and rigging failure is a free standing carbon fiber mast. All stress points are eliminated. The mast itself ca flex as necessary for conditions. I've had 3 Freedom yachts over 35 years and the proven concept has served me well.
Who else thinks the owner of Kraken looks like Mike (played by Jonathan Banks) from Breaking Bad? Beautiful company and it looks like they produce perfect yachts, thanks for this great introduction of Kraken!
I went back and watched your very first 'Project Atticus' video just now... What a long and incredible journey! I need to get moving, that inspires me to do a retrospective!
I've always loved your sailing videos and getting to share in your adventures; but I have to say, I can't take my eyes off that BEAUTIFUL baby girl. She is so adorable and growing up so fast. Enjoy each precious moment with this great treasure. Thanks for sharing your journey. xoxox
Kraken is one of the only builders that makes boats how they are supposed to be made. They shouldn't even be in the"production boat" category because they're built like custom high end (military quality) boats. So impressive!
Good sales promo. The one thing you didn't mention was ease of maneuvering in a marina, or not. Mind, I would not want to mess with that on a 1M5 boat that wasn't mine either. Do be aware that there is a line somewhere around 50 feet (or the metric equivalent or displacement equivalent) where the cost of owning, mooring and running the boat goes up faster than length. There tends to be a bigger insurance jump, a bigger jump in the cost of qualifying for that insurance, like captains lic. if you want not to hire crew for example. You may be looking at yearly inspections and of course everything costs more in parts too. All those electric winches are nice but have about twice as many parts in each one to go wrong. I like the idea of electric galley but for myself, I don't have the room for the battery bank or genset or the money to buy either. And I do need cabin heat as well so some sort of flame in some device somewhere already. I suspect Ming Ming II or Wave Rover are more sea worthy.... if much smaller and made for solo sailing but maybe not by much. Oh, and for all the new owners of multihulls on YT, I see someone found out how stable multihulls really are..... even when they are upside down.
Love your work Dick! I wish I could give you a couple of mill. But I'll get by with a low budget 80's boat one of these days- the aussie dollar doesn't stretch too far... I might have to nick a few of your ideas for the refit though! I really want to thank you for showing the industry what a real boat should be. I wish Kraken every success.
If I had those dollars, the Kraken would be my first choice. What a beautiful, well built vessel that is fully ocean crossing capable, comfortable and sturdy. Well done to the Kraken team!
you have Amel as competitor but thanks for the discovery already skeg + shaft they prove me good happy to see the engine room and acces ! privilege on catamarran have the same perks. on Amel when you lift the bed you have an underwater windows to see the prop, very cool feature
It is a beautiful boat. It’s also huge. Many of the high end features and innovation will eventually make their way down to more production style boats. Roller filers are pretty much standard now, even on sub 30’ boats. I line to see the tradition of seaworthy boat building to continue. It’s important. While most of us can afford a new $1.5 mil boat, eventually they will enter the second hand market. And as they age, they will become more affordable for the rest of us. So for this selfish reason alone, I wish the Kraken team tons of success and inspire more builders to build such vessels.
There are several things I did not like about the Kraken. 1) no dinghy davit system, so the dinghy presumably would sit on the foredeck. 2) there are no hand holds foredeck. One of the cardinal rules for sailing is "one hand for you and one for the boat". ALWAYS have a hand on the boat while underway, like a shroud line, or teak hand rail or steel pulpit (and lifelines dont count). Loved the Yanmar and the systems access, but some concern that the heat generated by the engine could affect electric components in there. Thanks for the great walkthrough.
Great to see the Kraken being featured. I was first introduced to this company by Adam & Khiara (SV Millennial Falcon) and they came to very similar conclusions. One of the best blue water cruising boats being produced for all the reasons you mentioned. Adam did quite a long, in-depth interview worth checking out too. (I think a screne grab of it was in this video?)
The first thing the owner/builder said that gave me shivers.... "It is impossible for this to ever fail" sounds like the famous last words of the Titanic builders. 😱😱 When I win the loto I would love to have a boat built, But I would build it with 100% aluminum using the designers of the M1 Abrams tank. 😂🤣 Test it in the wonderful waters around South Georgia Islands in the southern ocean during the winter. If it can handle Cape Horn in the winter. Now that would be a boat possibly worth having built and owning. But I do Confess.. I'm not a sailor, I have just watched far to many videos of boats built out of plastic and carbon fiber being destroyed in fair weather. No way I would ever sail one not built out of aluminum. Way awesome Video y'all. helped confirm for me that until I win the loto.. The best place is still on "Dry Land" 😁😂
Ok that was a very informative episode. Thank you for taking the time to share and educate us. Your insight and words of wisdom shows us just how much you care and enjoy the world and sailing. Sail on !!!
That Kraken 50, wow! Love the set up, I have the I want. Good episode, but I feel I have time-vested, in Atticus lol, I know her from the stern to the forward compartments... I am not ready to part ways, yet.
Personnally I don’t think that boat is as strong as the owner thinks Specifically: 1 that heavy piece of chainplate you had in your hand can be subject to stress corrosion cracking at the deck interface and Hydrogen embrittlement. i would use A Titanium alloy. 2 that SS plate in the skeg needs reinforcing gussets between the upper plate that is imbedded in the hull/ canoe and the vertical piece This will prevent bending and stress on the welds in a transverse load. 3 you didn’t show the details of the keel Good but not great.
The many things that enter into another decision for upgrades to any new material item. Grouping as you say, the many things to consider when mentally preparing so much to consider. One of my personal quests is know I have put the time in on an existing flat form before allowing my wants to overcome my needs. Can I make the old work or is it just the icing on top, (sweet tooth) of sorts projecting my interest for that caviar. In other words; have I put the time in, paid the price enough to deserve the next level? Many just merely say, I can afford it, so why not. The soul searching for acceptance of the qustion often leaves much room to quantify any answer. Ultimately we all need to make these tough decisions throughout life. Balance is difficult at the very least. Though I would speculate, should your future still maintain the sea, a larger craft may be in store.
This is one of the new Hybrid Electric Drive Version they talked about a while back. If you look at the video of engine room at (13.06 ) you can see the Belt drive from the Prop to the Combi Motor, ( at the Gearbox looks like a Timing Belt) and there is a little throttle on the Port side off Helm Binacle. ( you may have to watch it more than once, or pause the Video) This isnt mentioned, as i assume its a little secret, with a proper launch after the sea trials. Its a Parallel Hybrid, from a company called Combi, its probably around 20 / 25 KW by the looks of it. Combi is a big name in the Inland Waterways around Holland. Dick done a great feature on it about 2 years ago, they are really trying to eliminate the generator eventually.
Great boat, great tour! Thanks for the tour and the introduction. I now got a target to save money for :D But seriously, I think this is a fair price for a boat of this size and esp. for this safety! I would love to have a sail on it, not speaking of crossing an ocean.
If money was no object and you wanted the best monohull money could buy, I have no doubt it would be a Kraken. As an aside, I have been using Aeropress to make my coffee for years and it is as good or better than any fancy hyped up expensive coffee joint's coffee. The key with the Aeropress is to use good coffee beans.
Personally I would never consider an exposed helm. Enclosed (i.e., hard cover, at least partial enclosure) midships like the Amel or Beneteau would be my only choice of helm location.
Being wet and cold is danger, so I’m with you on the exposed helm location. The designer is heavily focused on safety so there’s probably storm covers for it - but it would definitely need to something to confirmed. Exposure is no joke.
BTW I’ve used Aeropress for my coffee when I go on motorcycle adventures. I also used it on a recent trip to the Philippines. The one I have breaks down to the size of a coffee cup. I use an espresso grind and it works great. Oh and that Kraken thing looks pretty cool too😂
Hats off to Kraken yachts for developing a great marketing strategy: invite sailing RU-vidrs to come and do a test sail/ and create a very watchable video ( This is about the third) , make sure all the USP’s are covered, and voila! RU-vid is a great selling tool. More yacht manufacturers should do this!
That Kraken 50 reminds me of the lines an Oyster yacht has of comparable size, toured in Annapolis when Atticus II made port there, 8ncluding meet-ups. Excellent marine craftsmanship in both vessels. ❤
Life rafts should be kept on the deck. Never below deck. What if water gets into that compartment. You damage that stern quarter, it takes on water. Sets of the life raft below deck. What happens? You have a fully inflated life raft below deck. For that reason, Life Rafts should be kept on the deck. Other than that. It's a nice looking boat.
What an amazing boat! Very expensive but also very safe and redundant. So much time and energy has been put into considering all the fail possibilities and mitigating these possibilities to the most efficient and successful outcome. Again, amazing. Unfortunately it will be a very niche market with the price so high. People like myself would love nothing else as much as this beautiful vessel, yet I could never afford over 1.5 million dollars. I guess I could look for one that has hurricane damage, but it probably would not be damaged because of it's huge tolerances! lol Kind of a catch 22. Thanks for this terrific video of an amazing boat! It's fun to dream and wish!