Тёмный

Do You NEED a 3D Spacemouse for Shapr3D, Sketchup, Fusion 360 | Tech For Makers 3DConnexion 

Bevelish Creations
Подписаться 85 тыс.
Просмотров 44 тыс.
50% 1

To try everything Brilliant has to offer-free-for a full 30 days, visit brilliant.org/BevelishCreations . The first 200 of you will get 20% off Brilliant’s annual premium subscription.
📌 CODE EXTENDED UNTIL DECEMBER 31st 2023
10% off on 3DConnexion products: bit.ly/3qEMOXG
(If discount is not applied, please use code: bevelish10)
📌 10% Off Shapr3D Pro Subscription: BevelishCreations10
Download Shapr3D here: bit.ly/3FXbnn9
In this video, I will show you how I have the Spacemouse Pro and the Spacemouse Wireless set up to use with Shapr3D, Sketchup, and Fusion 360 to help unify the navigation in all these programs to smooth out my workflow and make my design process more efficient. The 3Dconnexion Spacemouse 3D mouse are amazing tools that give the users more control over the navigation that's not obtainable using a traditional mouse.
*Thanks to Brilliant for sponsoring my channel! 😊
🍿 WATCH NEXT:
FIRST LOOK at Shapr3D NEW User Interface: • FIRST LOOK at Shapr3D ...
Furniture Design For BEGINNERS in Shapr3D: • Furniture Design For B...
DESIGN & MAKE in Shapr3D and Fusion 360: • DESIGN & MAKE in Shapr...
| FOLLOW |
► WEBSITE 👉 www.bevelishcreations.com​​
► INSTAGRAM 👉 / bevelish_creations
► FACEBOOK 👉 / bevelishcreations
🔧 Tools/Supplies Used (Affiliate) 🔧
■ Spacemouse Wireless bit.ly/45zTvcf (3DConnexion)
■ Spacemouse Pro bit.ly/3QHzk88 (3DConnexion)
■ Keyboard iqunix.store/bevelish (IQUnix)
5% Discount with code: bevelish
■ Mouse amzn.to/45d6OzM (Amazon)
■ Loupedeck CT amzn.to/3OFgHiL (Amazon)
📷 Film Gear (Affiliate) 📷
■ Microphone amzn.to/3KiEljG (Amazon)
■ Microphone Arm amzn.to/43NilUM (Amazon)
■ Lapel Microphone amzn.to/3EkoQEa (Amazon)
■ Main Camera amzn.to/3WZBi4u (Amazon)
■ Backup Camera amzn.to/3X6cub6 (Amazon)
■ Main Lens amzn.to/3tBru3m (Amazon)
CHAPTERS
00:00 - Introduction
01:08 - 3DConnexion Discount
01:30 - What Is a 3D Mouse?
02:11 - Getting Started
07:52 - Build Quality & Ergonomics
10:08 - Compatibility
11:02 - Navigation Setup
14:40 - Shortcut Keys Setup
22:54 - Do I Recommend It?
#bevelishcreations
#cadcam
#3dmodeling

Хобби

Опубликовано:

 

15 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 85   
@BevelishCreations
@BevelishCreations 10 месяцев назад
To try everything Brilliant has to offer-free-for a full 30 days, visit brilliant.org/BevelishCreations . The first 200 of you will get 20% off Brilliant’s annual premium subscription.
@chrisose
@chrisose 4 месяца назад
I've had a Spacemouse since I shifted my primary design work into Inventor. I can't imagine working 3d without it.
@jasonjordan9598
@jasonjordan9598 3 месяца назад
Great addition of showing video of how you actually use the mouse versus just showing the cool zooms within CAD.
@sphaxxhaps3628
@sphaxxhaps3628 День назад
Used to say it was pretty useless until I got one at work.... now I'm considering buying one for my hobby. It's just that amazing, but also a bit debilitating, I struggle to navigate models and be efficient with the basic MnK setup now. Worth it 100% if you're a CAD tech'
@lifeholdstrategic
@lifeholdstrategic Месяц назад
I bought the Spacemouse based on this video for Shapr3D,,, it’s been a game changer! I’m also using two Stream Decks. I made icons in Keynote to make selecting tools quick.
@BevelishCreations
@BevelishCreations Месяц назад
Awesome
@DesignCraftWorkshop
@DesignCraftWorkshop 10 месяцев назад
oh man! that's awesome! Need something like this for my workflow
@BevelishCreations
@BevelishCreations 10 месяцев назад
Dude you will not regret it
@garagemonkeysan
@garagemonkeysan 10 месяцев назад
❤👏Great instructional video. The Space Mouse is super intuitive. Very short learning curve. In fact I'd recommend it for people learning CAD. Mahalo for sharing! 🙂🙏❤️
@BevelishCreations
@BevelishCreations 10 месяцев назад
Thanks man! Which one do you use?
@garagemonkeysan
@garagemonkeysan 10 месяцев назад
@@BevelishCreations I have the Compact. But I should have bought the wireless. 🙂
@dwaynevarnell9157
@dwaynevarnell9157 10 месяцев назад
Used one since the first one was produce and had many since. Can’t live without it working in the cad world.
@BevelishCreations
@BevelishCreations 10 месяцев назад
Glad to hear!
@greggjohnson621
@greggjohnson621 10 месяцев назад
Indeed. I tend to avoid software that doesn’t support 3Dconnexion devices.
@greggjohnson621
@greggjohnson621 10 месяцев назад
I’ve been a 3Dconnexion user for about 20 years. I’ve had five of them over the years. The Enterprise is my favorite but the two button single knob format is also good. Most importantly, I have to say that pulling the knob up or pushing down should make the model space go up and down. Pushing away should make the model space push away. That’s one of the two default choices they give you and it’s so intuitive, because it feels like the knob is actually the model space. As if you’re holding the object with your left hand. The way you move the knob, is the way you move the object. It would not be good to get used to the other setup that you show at the beginning of the video, then decide later that you want to switch to the more natural and intuitive setup.
@BevelishCreations
@BevelishCreations 10 месяцев назад
I know that’s the default way of using it, but I’ve been using one of these for 15 years and have always had it setup this way. I doubt I’ll ever go back to the other way 😆
@greggjohnson621
@greggjohnson621 10 месяцев назад
@@BevelishCreationsif that’s what works for you that’s totally cool of course. 👍 When I advise new users, I always tell them to set it so the workspace moves the same way that the knob moves.
@crashkg
@crashkg 7 месяцев назад
Your videos are great thanks!
@BevelishCreations
@BevelishCreations 7 месяцев назад
Thank you!
@monkeysausageclub
@monkeysausageclub 10 месяцев назад
I've gotten pretty used to using the Stream deck with Sketchup. These would mean retraining muscle memory.
@BevelishCreations
@BevelishCreations 10 месяцев назад
It’ll be an upgrade. I’ve tried using a Loupedeck with these programs before, it’s not even close
@kyletaylor3578
@kyletaylor3578 5 месяцев назад
Hey Alex, great explanation of the spacemouse. I've seen people use a loupedeck / streamdeck on there productivity, setups and i've even seen people using the smaller people take the smaller spacemouse and pair it with a small streamdeck. Have you tried to use the loupedeck for CAD? is that even worth considering?
@BevelishCreations
@BevelishCreations 5 месяцев назад
I have a Loupedeck and it’s not that good for CAD. I tried it, but it’s laggy and you can’t really do much other than program some hot keys
@rinellauzakova6832
@rinellauzakova6832 10 месяцев назад
Omg omg I need to buy both 😍 so useful wow
@BevelishCreations
@BevelishCreations 10 месяцев назад
Yessss buy both!
@sonub5401
@sonub5401 2 месяца назад
Never heard of this before and I was curious. You're the first video I saw and a helpful one at that. So thank you for that. I was thinking of buying one of the cheaper ones, as I just got into Shaper3D. I couldn't help but notice some little platform thingy behind you mouse. Looks like something you'd rest the heal of your hand on. If you don't mind my asking, what is it and where do I get one? Thanks again.
@BevelishCreations
@BevelishCreations 2 месяца назад
Hey thanks for watching. Yeah it’s a wrist rest by a company called Deltahub
@darknessblades
@darknessblades 8 месяцев назад
With the smallest one I know that some people use a DIY macropad for shortcuts trough QMK
@BevelishCreations
@BevelishCreations 8 месяцев назад
I haven’t used that one. Not sure how well it works
@stevejones01
@stevejones01 7 месяцев назад
I used an old style Spacemouse (with the ball. Yeah way back when). Once you get used to these you won't want to model without it if you do any type of 3D modeling for CAD/CAM. Will this work in the non commercial version of Fusion 360? I can't find the answer online. All the reviewers us the commercial version. It would make modeling fun again.
@BevelishCreations
@BevelishCreations 7 месяцев назад
Yes it’ll work with the non-commercial version. That’s what I use
@FPChris
@FPChris 4 месяца назад
I’m left handed can I use it in my right and my normal mouse on my left? It looks ambidextrous.
@shapeshifterboogie9853
@shapeshifterboogie9853 10 месяцев назад
Like you could read my mind. I was literally wondering how I would use it with Shapr3D!
@BevelishCreations
@BevelishCreations 10 месяцев назад
Hope this video gave you a good idea on how you’d want to set one up!
@nlgordon
@nlgordon 6 месяцев назад
I've been googling around, and unable to figure out how you mapped a button to switch workspaces in Fusion 360. I've kinda hacked getting back to the design workspace with the any shortcut plugin, but it won't let me switch to the manufacture workspace. Thoughts?
@BevelishCreations
@BevelishCreations 6 месяцев назад
Mine is just a workaround. I mapped the key to cycle through the different workspaces. Since I only use Fusion 360 for CAM, it works well for me to assign the key to jump to manufacture from design. But if I need to go back to design, I’ll need to press it a few times to cycle through the other workspaces
@davidprock904
@davidprock904 6 месяцев назад
What about for game play, like a 3d world shootem up game?
@BevelishCreations
@BevelishCreations 6 месяцев назад
Not sure if it’ll work with that, you’ll need to check their site
@quanti5
@quanti5 8 месяцев назад
I love those 3D Mice. I had one when learning CAD/CAM like 18 years ago with Mastercam and SURFCAM. I think it wasn't even called a SpaceMouse back then. I don't do it much anymore, but using 3D software without one still feels wrong. Your justification for having the computer mouse on the right side being because you're right handed seems absolutely bizarre to me. I'm left handed and I use the mouse on the right side too. Aren't 95% of mice ergonomically shaped for the right hand anyway? I don't think I've ever seen anyone use a mouse in their left hand. Just imagining it feels so alien to me!
@BevelishCreations
@BevelishCreations 8 месяцев назад
I just meant I still use both a regular mouse and a space mouse. Some people have the space mouse setup on the right side and will use a track pad on their left side. And a few companies make left-handed mice, one of them being 3Dconnexion
@nicolacasali8304
@nicolacasali8304 5 месяцев назад
I'm left-handed and use a left-handed mouse. Right hand uses the SpaceMouse. It couldn't possibly work the other way around for me, not without months/years of relearning.
@greggjohnson621
@greggjohnson621 10 месяцев назад
When Shapr3D was first adding support for 3Dconnexion, I did this video for them to demonstrate the importance of Lock Horizon. Also the center of rotation was important to show. Their beta was a little rough at that time but it all works quite well now. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EA-haUgJMyo.html
@BevelishCreations
@BevelishCreations 10 месяцев назад
Nice! Yeah glad it wasn’t some setting I missed in F360
@aaronalquiza9680
@aaronalquiza9680 10 месяцев назад
SpaceMouse wireless looks like a buy for me.
@BevelishCreations
@BevelishCreations 10 месяцев назад
Get itttt. 10% off with the link :D
@NTruske
@NTruske 9 месяцев назад
does it work in Pop_OS or nobara Linux?
@BevelishCreations
@BevelishCreations 9 месяцев назад
It works with Linux
@waltergava5034
@waltergava5034 8 месяцев назад
No more coupon available, what keyword is that?
@BevelishCreations
@BevelishCreations 8 месяцев назад
Really? Try using the code again. Sometimes you need to do it a couple of times. Not sure why
@waltergava5034
@waltergava5034 8 месяцев назад
@@BevelishCreations tried again, saying they reached the limit, I meant which keyboard is on the video
@BevelishCreations
@BevelishCreations 8 месяцев назад
@waltergava5034 weird…I’m not sure what’s going on. I can ask. The keyboard I use is the IQUNIX F97 Hitchhiker. You can get 5% off using the code: bevelish on their site
@waltergava5034
@waltergava5034 8 месяцев назад
@@BevelishCreations I was able to order with a link from another video, I believe the one where you were modeling with shape 3D, thank you for reaching out
@BevelishCreations
@BevelishCreations 8 месяцев назад
@waltergava5034 awesome!
@earth355
@earth355 8 месяцев назад
hello does your coupon code work in india? doesn't seem to be working for me unfortunately
@BevelishCreations
@BevelishCreations 8 месяцев назад
It should. Sometimes you might have to try a couple of times. Something weird happens with cookies.
@earth355
@earth355 8 месяцев назад
@@BevelishCreations the link in the description takes me to us store. It seems the discount there. and when I change the country and add it to cart and I apply the coupon code . It says coupon code doesn't exist.
@BevelishCreations
@BevelishCreations 8 месяцев назад
@earth355 let me ask them…I’ll let you know once I hear back
@earth355
@earth355 8 месяцев назад
@@BevelishCreations thank you so much for this
@BevelishCreations
@BevelishCreations 8 месяцев назад
@earth355 I’m still waiting to hear back from them, the guy responsible is on vacation. I’ll let you know as soon as I get back to you. Just wanted you to know, so you don’t think I ghosted you haha
@aks13v35
@aks13v35 6 месяцев назад
Somebody uses this on Exocad?
@BevelishCreations
@BevelishCreations 5 месяцев назад
Exocad is supported. I have not personally used it though. There are videos of people using it with Exocad though
@mairmatt
@mairmatt 6 месяцев назад
Nice story. But: The guy that has used a shit ton of 3D mice in his job as a designer for the automotive industry is oblivious about this fact in his job as a designer of furniture until the manufacturer of these tools comes back on him to sell their product. Yeah .... sure ... yeah .... I have one of those for years now and they are awesome. But if I was ever to forget about this fact I would stay away from any design software due to the fact that my brain morphed into mush.
@BevelishCreations
@BevelishCreations 6 месяцев назад
No…it’s simply because I switched over to designing on the iPad 😂 this program I’m using only recently became available on the computer
@Weird_guy79
@Weird_guy79 22 дня назад
Damn, pricey.
@evgeniydeus8137
@evgeniydeus8137 Месяц назад
The title is quite misleading, it's posing a question that video doesn't give answer to...
@BevelishCreations
@BevelishCreations Месяц назад
The answer is yes…
@evgeniydeus8137
@evgeniydeus8137 Месяц назад
@@BevelishCreations The answer sounds... expensive)
@planefusionart
@planefusionart 5 месяцев назад
I don't understand why people are using these in the left hand... I mean why??? Seems idiotic to have two mice when the keyboard is such an essential tool in 3D
@BevelishCreations
@BevelishCreations 5 месяцев назад
Because it’s deigned to be used in the left hand…it’s not a mouse
@planefusionart
@planefusionart 5 месяцев назад
@@BevelishCreationsthe spacemouse is not a mouse?... lol. I mean it's doing the same functions of a mouse except it has more functionality. I get that it was designed for the left hand, I still don't get why.
@BevelishCreations
@BevelishCreations 5 месяцев назад
@planefusionart no it’s not a mouse, it doesn’t move the cursor at all
@planefusionart
@planefusionart 5 месяцев назад
@@BevelishCreations oh I see.. well that's sad.
@HonzaZalabak
@HonzaZalabak 4 месяца назад
​@@planefusionart its not sad :D some thought was put into designing these things
Далее
Do You Actually NEED A 3D Mouse? (The Full Story)
12:23
Eddie Hall VS Neffati Brothers
00:11
Просмотров 1,7 млн
СЫВОРОТКА С ВБ
00:39
Просмотров 417 тыс.
I spent 1 year searching for a perfect mouse for Mac
8:01
Testing 8 Innovative New Boat Propeller Designs
24:08
The ULTIMATE Raspberry Pi 5 NAS
32:14
Просмотров 1,5 млн
High precision speed reducer using rope
20:19
Просмотров 1,1 млн
Про 3D манипуляторы
18:43
Просмотров 89 тыс.
What's Inside a Space Mouse?
8:02
Просмотров 64 тыс.
ГИБКОСТЬ 80 LVL
0:18
Просмотров 4,9 млн
London Bridges Rap! #kidssong #funny
0:14
Просмотров 86 млн
Тг канал: lorxxix🤩💓 #dance
0:11
Просмотров 1,3 млн