Do you need Separates for your Surround Sound System?

Подписаться 35 тыс.

Просмотров 21 тыс.

50% 1

Do you need Separates for your Surround System? And really, what does that even mean?
Free Home Theater Guide:
tym.link/Theate...
If you're looking at a Surround Sound System, there's a good chance you'll read or hear about using Separates.
Most of us are familiar with Surround Sound Receivers. A typical Surround Sound Receiver, has two main jobs to do. It process the signal it's getting from the Blu-ray player, or Apple TV, and it amplifies (or powers) the speakers.
With separates, we break those two jobs out into separate components, so that each piece of hardware can focus exclusively on the thing it does best.
So you have a dedicated Processor, often called a Pre Processor or Prepro to manage the signal coming in from the Video Source.
Then you have dedicated Amplifiers to power the speakers. There's different configurations for amplifying your speakers, but a common one we see a lot is to use a dedicated Amplifier for the 3 front channels, and a second Amplifier for all the surrounds and atoms speakers in the room.
You could separate it out even further, but that's a very common setup.
One of the main advantages here, is that you give the speakers the kind of power they need to perform at their highest level.
Without geeking out, under powering your speakers is a bit like running a race on one leg. It works, but not as efficiently as running on two legs.
Now this is an oversimplification, there's a lot more to separates, and amplifiers than we're covering here, but hopefully that gives you the general idea.
So now the question is whether or not you actually need Separates for your surround. As a general rule, all surround systems will benefit from separates. That being said, if you're budget for the surround system is $5,000-10,000 I'd probably focus on getting the best speakers you can, and then using a high quality surround receiver.
If you have a larger budget for your surround approaching $15,000-20,000 then I might start looking at separates. Again, there's no fine science here. Every application is always different.
And you can always add separates later. So start with your speakers, and then as you're able break out your Receiver into separate amplification.
ABOUT TYM
Our mission here at Tym is to help home owners everywhere have a Smart Home they LOVE, without blowing up the budget, buyers blues, or a system headaches.
Here are the ways to work with us here at Tym:
⚡️FREE GUIDE: Our Award Winning Theater Design Team put together this free guide:
tym.link/theate...
⚡️BOOK: Check our top selling book How To Wire Your Smart Home here:
tym.link/wirebook
⚡️COURSES & SMART HOME CLUB: We combined all our Digital Courses in one central hub:
tym.link/smarth...
⚡️Design Services: Want Tym To Help You Design Your Smart Home or Theater:
Smart Home Design Service: tym.link/mydesign
Home Theater Design Service: tym.link/mytheater
MORE FREE SECRETS AND TIPS:
Find Tym Online: www.tymhomes.com
Instagram: / tymhomes
Facebook: / tymsmarthomes
Twitter: / tymhomes
TikTok: / tymhomes
#TYMhomes #hometheater #surroundsound #DolbyAtmos #MattMontgomery

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@hildareveron6858 2 года назад

Dont buy a surround processor its best to buy a really powerfull reciever with preout then run a separate amp to run front left and right towers speakers then another amp for center and let the recivers internal amp just run all the sorrounds. It will blow you away.. as the reciver now has plenty of headroom to handle just the surrounds , put fans on all of the amps to run cool and make sure you got a direct 20 amp Power line from the panel and a surge protector unit to clean and condition street Power coming in the house. You do this and you will never blow a tweeter when cranking up your system and you will be able to play a whole movie at Reference levels or more.

@retroforce6919 5 лет назад

I ran my AV receiver for couple of years as is, and it sounded great. I ended up buying a external amplifier for a fair price. My receiver sounded like a different beast. It sounded louder with less effort, and I'm not sure if it's in my head but to me I'm hearing more details than without an external amplifier.

@michaelslocumbsr.2286 5 лет назад

So, I like separates because you can maximize the power going to the surrounds and the height channels.... Most receivers place most of their power in the LCR channels while placing 35 to 65 Watts in the surround and height channel.... Keep in mind that, depending on the speakers and your room setup, a receiver would do just fine for most set ups.....

@ChrisSmithFW 4 года назад

Nicely done. About as simplistic and easy-to-understand tutorial on the subject as I've found. Much appreciated.

@beyondonethousand 3 года назад

For ultra high performance you will need an amp. Too many reasons to list.

@gadgetguy5871 5 лет назад

Great video but I have a question. If I have 6 seats 3 in front 3 in back should the side speakers(in wall) be between the seats and should the atmos speakers be placed 2 in front of the front seats and 2 in front of the rear seats? I have a 11.4.2 system. I'm building my room out now and needed advice on proper placement of speakers for theater room.

@AM-jg9ic 3 года назад

That was incredibly helpful to understand the basics and potential impact on overall cost. Thank you!

@curtismariani6303 2 года назад

Thanks, I feel better about my staged approach now. I’m installing a 7.1.4 system into my living room (approx 1400 sqr feet). I need to build it up over time due to the cost of the down stairs remodelling and sound damping treatment I’m doing. For now I’m just getting an all in one receiver to power all the channels (likely the Denon x6700h) and adding 4 new ceiling speakers (RSL C34E MKii) to my existing 5.1 speakers. Then I’ll add 3 new front speakers (probably 2 Klipsch RP-600M II and a R-50C) and replace the rear speakers with Klipsch R-40M’s. Finally I plan to add a 3 channel amp to separately power the front 3 channels and replace my existing sub. I know I will be making compromises due to it being a living room but Hopefully if I can get the speaker placement right it should sound pretty decent after being professionally EQ’d.

@et8865 10 месяцев назад

Should you buy an inbox system with all speakers or Should you piece the entire system with different type of "quality " speakers

@SmartHomeBrothers 10 месяцев назад

We use the same model for all LCRs, same model for all surrounds, same model for all Atmos. And all speakers from the same brand/line.

@et8865 10 месяцев назад

@tymhomes so what is the best all on one boxed surround sound system for a room 17×17 " roughly"

2 года назад

THANK YOU AWESOME THAT I WHAT I NEEDED TO KNOW YOU THE MAN AND I WILL BE A SUBSCRIBER

@BilalFazalShaikh 4 года назад

I have an average size living room, I will be running Denon 6700, Klipsch 8000f, 504c, 4 Atmos ceiling, SVS PB3000, for a 7.2.4 setup. Do i need an amplifier? I have never used it, previously i had Onxyko TXNR 636 7.1 with Paradgim CT Cinema 100, i never used 100% volume, mostly at 50 only.

@Mike_v_E 3 года назад

I would like to know this too

@SmartHomeBrothers 5 лет назад

Leave your questions and comments down here, and we'll do our best to respond to every one!

@hometheaterman1424 4 года назад

Hi I own an Onkyo TX-RZ1100 Reciever. Can my Onkyo TX-RZ1100 Reciever can I still use separate to separate my sound? And which would sound better using separates or using an Reciever?

@angelluisguzmandeleon4903 4 года назад

hi,, enjoy your videos,,a lot info to processing..but in good way..I running system 7.2.4 Dolby Atmos ..marantz AV 7705 (preamp) +Monolith 11X XLR connections ..and I am very happy ...a lot details, very clear and separated sounds in movies..do you think if I get another amp only L-C-R is gonna be better than now? if it is like this? how much ? thanks

@Jdeneik 3 года назад

I have a 3 channel ATI amplifier, but looking forward an excellent pre/pro that is used. I need 5.2 . Do you have a recommendation? This is mostly for 2 and 5 channel listening Thank you

@ramyarj 2 года назад

So how do you adjust volume? Do you have to set volume separately for each amp every time you want it louder/softer?

@wolverine3344 2 года назад

No, the amps are only power regardless how many. The preamp/processor volume control adjust all volume levels together.

@wolverine3344 2 года назад

Not to be confused with “calibration” that happens inside the processor, where you adjust audio level (and distance) per speaker, so volume up or down makes the whole system louder or quieter.

@SANTA17 4 года назад

the last few days i've been watching your video series about home theaters, and i gotta say i love your info and im surprised you don't have more views. keep it up man, great job of these videos and keep them coming. I will be building my house in a year or so and a theater room is one thing i want and was wondering what is a good starting buget wise for a great theater room?

@mdoh8209 2 года назад

Very understanding video , not over whelmed cheers again

@freddy1382 5 лет назад

Hi, i have a older Yamaha flagship receiver and was wondering what would be the output power at 0 db.. like 50 or 100 watts? I have a rx z9. I run bowers Wilkins cm series towers. Thanks.

@freddy1382 5 лет назад

Needless to say it always sounded stunning

@babymaker13th 4 года назад

Do we really need an amp ? I have the avr-a660 Yamaha and I have everything hooked up to it and it seems to be working

@dlloyd6300 4 года назад

need more info

@callejon5ovando400 3 года назад

hi fi audio?

@callejon5ovando400 3 года назад

power amp ,amp,pre amps?

@jasonperry6046 5 лет назад

No question, just thank you. I feel like a kid in a candy store with all the new content. It is almost as good as when I found your channel and binge watched everything. PS. I love the format with the chart paper. Please don’t feel like you have to go fancy, this is comfortable .

@SmartHomeBrothers 5 лет назад

Thanks my friend! Appreciate the support, and the feedback. Glad you like the note board. Some videos lend themselves to other things, but as a general rule we like the original note pad. Like you said, just comfortable :) let us know if there's anything particular video wise you would like us to answer

@jasonperry6046 5 лет назад

@@SmartHomeBrothers the only thing I could suggest. Your clients obviously can afford larger setups; it would be nice to see a set of videos on systems for various house sizes, and how to plan your system so it scales with a move to a bigger house.

@michaelslocumbsr.2286 5 лет назад

Sir, Your thoughts on subwoofers in the ceiling... Such as the new IMAX Enhanced?

@SmartHomeBrothers 5 лет назад

Michael Slocumb Sr. In-ceiling subs are a great option when the application calls for it. I prefer traditional placement on floor or even in wall, but we’ve used in ceilings subs, and clients have always been really happy with them.

@SmartHomeBrothers 5 лет назад

Jason Perry good deal I’ll get you one for that

@saikatbose8370 4 года назад

I have a question since I am already using a marantz 5.2 .2 av receiver and getting sufficient sound from the lfe inspite using all towers except the Atmos and the center speaker which is from klipschs reference series r50 if I remember correctly. Now my point is since I am using a reciver will using the preouts as this receiver has will give that same balanced sound as you get while using just the lfe or the preouts actually outsink the sound and proccessor required for separates. Why I asked this is because in 2005 I started my theatre by using separates directly from the analog outputs of the blue ray player as such analog player s were available then. After upgrading to marantz I get good power and ofcourse the complcasies of adjustments of the different amplifiers from time to time. So if possible read carefully please and answer. Thanks for this viedo