How to Connect An AV Receiver (AVR) | EASY Step By Step Instructions

Подписаться 135 тыс.

Просмотров 383 тыс.

50% 1

How to Install an AV Receiver | EASY Step By Step Instructions
Links to all products below ⬇️⬇️⬇️
Channel Sponsor: Arendal Sound - bit.ly/Arendal_Sound
Arendal 1723 Speakers - bit.ly/Arendal_1723_Series
Arendal 1723 Monitor - bit.ly/Arendal_1723_Monitor
Arendal 1761 Speakers - bit.ly/Arendal_1961_Series
Arendal Subwoofers - bit.ly/Arendal_Subwoofers
Recommended Cables:
Speaker - amzn.to/3Jimwjv
Subwoofer - amzn.to/3ZW562K
HDMI 2.1 (3' to 10') - amzn.to/3YJzA6T
Banana Plugs - amzn.to/3mQ2Xr6
Toslink (Optical) Cable - amzn.to/3JCjs2M
RCA - amzn.to/3FlX9Ms
RCA Y Splitters - amzn.to/42aPjyL
Component Video - amzn.to/402SwyL
Pioneer Elite AVR's:
7.2ch Elite VSX-LX105 - amzn.to/3FnSAkF
9.2ch Elite VSX-LX305 - amzn.to/3l5bw0R
11.2 Pioneer Elite VSX-LX505 - amzn.to/407znLQ
Klipsch Reference Premiere II Speakers
All Klipsch Speakers - bit.ly/Klipsch_Speakers
RP-8060FA II - bit.ly/Klipsch_RP-8060FA-II
RP-504C II - bit.ly/Klipsch_504C-II
RP-600M II - bit.ly/Klipsch_RP-600M-II
RP-500SA II - bit.ly/Klipsch_500SA-II
SPL-120 - amzn.to/3XtF1Hu
Weekly and monthly Zooms on Patreon - / youthman
MWAVE 2023 Tickets and Info - midwestavexperience.com/
Best pricing on Home Theater products - youthmanreviews.com/sales/
FREE Home Theater Design Tool - bit.ly/Home-Theater-Design-Tool
Ways You Can Support:
Patreon: / youthman
Youthman Courses - www.youthmancourses.com/
Youthman Merch - teespring.com/stores/youthman/
Donation via Venmo @Youthman
Follow Us:
RU-vid: Subscribe to this Channel: goo.gl/YEJ23p
Youthman Crew Facebook Group - / youthmancrew
Instagram: / youthmanreviews
Twitter: / youthmanreviews
Website: youthmanreviews.com/
____
Disclaimer: Affiliate Links are used in the description of this video. I earn from qualifying purchases.
Valencia Bespoke Series Theater Seats:
Tuscany Ultimate Luxury - bit.ly/valencia-tuscany-ultim...
Oslo Ultimate Luxury - bit.ly/valencia-oslo-ultimate...
Naples - bit.ly/Valencia_Naples
Valencia Cinema Series Theater Seats:
Venice - bit.ly/valencia_venice
Budapest - bit.ly/valencia_budapest
Piacenza - bit.ly/valencia_piacenza
Piacenza Powered Headrest - bit.ly/valencia_piacenza_powe...
Verona - bit.ly/valencia_verona
Verona - Powered Headrest - bit.ly/valencia_verona
Valencia Premier Series Theater Seats:
Oslo - bit.ly/valenciaoslo
Oslo XL - bit.ly/valenciaosloxl
Zurich - bit.ly/valenciazurich
Tuscany - bit.ly/valencia_tuscany
Bern - bit.ly/valencia_bern
All Valencia Seating - bit.ly/valencia_all

Наука

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 253

@cod4787 10 месяцев назад

Sometimes you know when you watch an amazing guide. Thank you! , sir.

@keepingupwiththejones2933 Год назад

Youthman getting back to basics . Very helpful video for people who just home and unboxed a prized AVR to begin their home theater journey ❤❤🔥🔥.

@Youthman Год назад

Thank you. Trying to help anyone that is interested in Home Theater, regardless of where they are in their journey.

@1orderofwildplease 4 месяца назад

That video was great! Very impressed how you demonstated everything in a way that even this A/V rookie was able to understand! Thank you!

@Youthman 4 месяца назад

Thank you kindly.

@tomgraber8839 8 месяцев назад

Great video! I needed to figure out how hook up a used Pioneer Elite AVR receiver and wasn't sure about a few things but you did such a good job of explaining that I now know how to do it.

@mikaelbiilmann6826 Месяц назад

Thank you for this great walk-through. I recently bought an old old Pioneer SC-LX57, and now will connect it up.

@itz4u 10 месяцев назад

@Youthman, I am so glad I found your channel. This video answers a lot of things others weren't. My friend has a: BOSE sound bar that has: 1.S/PDIF Output - 2.a RCA input #1 3.a RCA input #2 -3.a sub out SHARP AQUOS QUATTRON What I see on the back(I'm assuming that's what I'm supposed to use for this case) VIDEO 1 w/ R AUDIO L AND VIDEO VIDEO 2 w/ R AUDIO L AND VIDEO COMPONENT w/ R AUDIO L AND VIDEO AND Pr Pb and Y (She has the BOSE RCA input #1 going into that component R AUDIO L AND VIDEO of the TV. AV YAMAHA HTR On the back of the AV I have no idea where to plug anything to the back of this. I twiddled around and put it in the CD in the DVD in everything I could and on the front put in the corresponding input and nothing works. I'm confused on making work through the tv(which doesn't work) the AV (which she has sitting there) and I'm lost. I see from your video the visual on the back looks so much like mine, but I can't get it connected and for the last 4 weeks till I seen this video, it started to make sense, but still don't know what I'm doing wrong. Its driving me nuts!! Can you tell me where I'm going wrong or whats the best way please, Thanks

@dannyroldan_av Год назад

Thx Youthman! Love your content. I havent seen Component cables in a min lol. This video is very much needed in our community thank you!

@Youthman Год назад

Right? I’m a bit surprised brands continue to add them to AVR’s but I guess people still have older gear they want to connect.

@ryank5309 6 месяцев назад

Thank you! This is exactly what I was looking for

@brianlewis7632 Год назад

Blessings 🙌🏿 Kansas City is Watching 👀

@osp2548 2 месяца назад

very thorough thank u!

@tdhoeffel 11 месяцев назад

Thank you so much. Just starting here.

@adrianred236 8 дней назад

Thanks for that, great explaination.

@jamesanderson4014 5 месяцев назад

Excellent straight forward video and nice amp. I stick to 8 ohm speaker. Banana connection is sweet.

@mikelary88 Год назад

Very nice overview. I would have liked to have seen you quickly discuss 12v triggers and possibly also IR inputs - but regardless this is a good intro for someone that has no idea where to begin. Thanks for your efforts and all the content you put out Youthman! 👊

@Youthman Год назад

Amps come with a 3.5mm cable to connect from the 12v trigger on the AVR to the amp. Turn the amps power to on. Now when you turn on the AVR, it “triggers” the amp to turn on. When you turn AVR off, it “triggers” the amp to turn off. That’s it

@Youthman Год назад

How to Connect an AV Receiver | Home Theater Basics Links to all products below ⬇⬇⬇ Recommended Cables: Speaker - amzn.to/3Jimwjv Subwoofer - amzn.to/3ZW562K HDMI 2.1 (3' to 10') - amzn.to/3YJzA6T Banana Plugs - amzn.to/3mQ2Xr6 Toslink (Optical) Cable - amzn.to/3JCjs2M RCA - amzn.to/3FlX9Ms RCA Y Splitters - amzn.to/42aPjyL Component Video - amzn.to/402SwyL Pioneer Elite AVR's: 7.2ch Elite VSX-LX105 - amzn.to/3FnSAkF 9.2ch Elite VSX-LX305 - amzn.to/3l5bw0R 11.2 Pioneer Elite VSX-LX505 - amzn.to/407znLQ Klipsch Reference Premiere II Speakers All Klipsch Speakers - bit.ly/Klipsch_Speakers RP-8060FA II - bit.ly/Klipsch_RP-8060FA-II RP-504C II - bit.ly/Klipsch_504C-II RP-600M II - bit.ly/Klipsch_RP-600M-II RP-500SA II - bit.ly/Klipsch_500SA-II SPL-120 - amzn.to/3XtF1Hu Weekly and monthly Zooms on Patreon - www.patreon.com/youthman MWAVE 2023 Tickets and Info - midwestavexperience.com/ Best pricing on Home Theater products - youthmanreviews.com/sales/ Ways You Can Support: Patreon: www.patreon.com/youthman Youthman Courses - www.youthmancourses.com/ Youthman Merch - teespring.com/stores/youthman/ Donation via Venmo @Youthman Follow Us: RU-vid: Subscribe to this Channel: goo.gl/YEJ23p Youthman Crew Facebook Group - facebook.com/groups/youthmancrew Instagram: instagram.com/youthmanreviews/ Twitter: twitter.com/youthmanreviews/ Website: youthmanreviews.com/ ____ Disclaimer: Affiliate Links are used in the description of this video. I earn from qualifying purchases. Valencia Bespoke Series Theater Seats: Tuscany Ultimate Luxury - bit.ly/valencia-tuscany-ultimate-luxury Oslo Ultimate Luxury - bit.ly/valencia-oslo-ultimate-luxury Naples - bit.ly/Valencia_Naples Valencia Cinema Series Theater Seats: Venice - bit.ly/valencia_venice Budapest - bit.ly/valencia_budapest Piacenza - bit.ly/valencia_piacenza Piacenza Powered Headrest - bit.ly/valencia_piacenza_powered_headrest Verona - bit.ly/valencia_verona Verona - Powered Headrest - bit.ly/valencia_verona Valencia Premier Series Theater Seats: Oslo - bit.ly/valenciaoslo Oslo XL - bit.ly/valenciaosloxl Zurich - bit.ly/valenciazurich Tuscany - bit.ly/valencia_tuscany Bern - bit.ly/valencia_bern All Valencia Seating - bit.ly/valencia_all

@nickc6411 Месяц назад

This video showed me everything I needed! Thank you very much. Banana plugs! Woohoo!

@Youthman Месяц назад

I’m glad you found the video helpful

@welderfixer Год назад

More Youthman awesomeness! Thx Mr. Stevens! You're a real pro.

@Youthman Год назад

Appreciate it.

@papercrowe8772 11 месяцев назад

This is so useful, as a college kid in charge of my groups home audio system and with zero knowledge of any of this last week, thank you, this makes it so much easier!

@mrdewes Год назад

Very good instructions.

@teresahopemiller1008 7 месяцев назад

Thank you for making it fairly close up I was able to zoom with magnification. So many other RU-vidrs don't make it easy for a geek to see when having a issue with low vision. They either don't speak English, or they don't talk at all. and the view isn't lit or close up. So, thank you very much. I learned about some great tips of the banana tips and the new terminology. I give you a like and *****.

@Youthman 7 месяцев назад

Glad you found the video helpful

@rlbc_lagos 6 месяцев назад

You are the best out of everyone explain this onkyo receiver. I love your content well understood. God bless you.

@Youthman 6 месяцев назад

Thank you kindly

@keepingupwiththejones2933 Год назад

Great tip on how to use an RCA splitter to connect multiple subwoofers using their RCA connections

@Youthman Год назад

It’s a common question that I get asked

@BlueJazzBoyNZ 2 месяца назад

A most outstanding post. Clarified a big box of what didn't I know..

@Youthman 2 месяца назад

I'm glad you found the video helpful.

@jwliebenberg 6 месяцев назад

Thank you sir I really appreciate it

@spencer82rocks 6 месяцев назад

I subscribe as soon as I fall sleep listening to you’re lecture knowing more about receiver and external amplifier and so forth, very easy to understand and follow , I do understand receiver and some sound system it’s just I need to go back to basic which you explain very well , Huge Thanks and keep it up, Stress free lecture to follow 😊😊😊,

@Youthman 6 месяцев назад

Glad you found the video helpful

@IzludeTingel 4 месяца назад

ahh there we go, that explains it. i just bought a pioneer vsx 815 at thrift for $20, using it for my PC speakers (sony bookshelf speakers), wasn't sure if I was supposed to do the bare wire twisty connectors or the pre-out (i'm so used to RCA cables, so i tried the pre-out). no sound.. then i went to the twisty, sound works, but was confused as to what the preout even was. thanks!

@alozzzy1213 8 месяцев назад

Very helpful. Thank you so much.

@Youthman 8 месяцев назад

Glad you found the video helpful Kody!

@babyvlad007 7 дней назад

I really appreciated seeing this. I'm now wondering if it is worh keeping my old Technics SA-GX190. It doesn't have any HDMI ports.

@jannahrusdi872 7 месяцев назад

This person explained so clearly and so sample. I have watched so many videos about how to add extra amp to av receiver,but this was super easy to understand. I really appreciate ur video. Thanks heaps!

@Youthman 7 месяцев назад

I’m glad you found the video helpful

@jannahrusdi872 7 месяцев назад

Hi sir. I need to know more about the pre out connection. Question: I have 2 AV receiver and they both have same rca jucks for pre out . One of them says pre out and another one doesn't says pre out it says AUDIO left, right, center, subwoofer rear right rear left. So,I don't know what to do? 😊 Or if you could make another video to show the back of both receivers connections . Thanks 🙏

@Youthman 7 месяцев назад

@jannahrusdi872 what is the model number of the AVR

@jannahrusdi872 7 месяцев назад

@@Youthman 1: Integra model: DTR-30.4 2: JVC : Model: RX-7022v 3: Yamaha: model: RX-v565. Thanks 😊

@jannahrusdi872 7 месяцев назад

@@Youthman Hello sir. I am still waiting for ur advice. Thanks 🙏

@user-fu3cw2oz5e 2 месяца назад

D video really help and put throw, and I thank God my system works perfectly without contacting technician.

@unclejohnthezef 4 месяца назад

thx Youthman!!!

@mlough21 4 месяца назад

Great video showing what needs to be done clearly, not like some who like to see themselves on camera and like the sound of their voice…

@Youthman 4 месяца назад

Glad you found the video helpful

@eltruheyo Месяц назад

Hi, you mention that if you have a sub that you would plug it into the sub 1 on the back of the receiver, however you connected it to the one that has a 2 on the back. Does it matter?

@Youthman Месяц назад

No it doesn’t matter which one you use. They both output the same exact signal.

@stevenedwards8651 5 месяцев назад

Great video. I really appreciate it! Quick question… I am setting up an older pioneer elite monitor with hdmi however not arc. I have a pioneer elite vsx-90 Reciever and pioneer elite blue ray player. I just purchased a sound bar with arc (Polk) Where would I connect the hdmi cable from the sound bar to my receiver? Could I connect it to the arc hdmi since I won’t be using that for the monitor?

@HedgehogY2K 12 дней назад

Oh my gosh, that's how amplifiers work? I'm glad I don't live in a mansion. Wait, (2024 update), that means 24 bit sources have more significance in big rooms. The noise floor in a small living like mine does not require past 16 bit noise floors at all. I don't need a separate amp to jump my 16 bit transcodes past room tolerance. Amps are there to help hardware represent the 24 bit noise floor by allowing more power to surge through them. Bit depth should be relative to the size of your room. Even then 16 bit/48KHz can still fill a room if you have the equipment that can handle even that.

@aliciaANDanthonySandoval Год назад

I have the pioneer vsx lx301 but would love to upgrade to separates. That pioneer vsx lx505 looks nice though... 😉👍🏼

@danemoreno88 Год назад

Good clear how to for someone that may not know how great job

@Youthman Год назад

Thank you Dane. I know there’s a lot of new guys getting into the hobby. Sometimes it’s easy for us to forget that not everyone knows the basics.

@jayroland9481 Год назад

Excellent presentation, well put together & explained. Sadly let down by incessant ads.

@Youthman Год назад

Sorry. That’s up to RU-vid on the ads.

@terrakorp4291 3 месяца назад

Thanks very informative...

@Youthman 3 месяца назад

Im glad you found the video helpful

@AudioElectronicsChicago Год назад

Very Informative

@Youthman Год назад

Thank you

@jarodreddig63 Год назад

Well done my good sir.

@centurion8446 9 месяцев назад

The HDMI Arc/eArc out goes into the Arc/eArc HDMI in Port on the TV? Isn't that just audio when plugged into audio devices (soundbar) or does it carry the visual as well in the case of the AVR (including from legacy devices which tbh looks eminently useful)

@sphenoidjjj 2 месяца назад

How are you connected the individual pre outs to the extenal amp ? Surely you can only use one rca output at a time on the external amp?

@julioirizarry4262 Год назад

excellent video! very informative. By the way I just recently got two Tuscany luxury and one Oslo luxury ""(middle) chairs after watching your reviews. Currently looking at AV receivers and speakers to upgrade from my Sonos soundbar set up.

@Youthman Год назад

Thank you Julio and congrats

@toner37 Месяц назад

good step by step set up. But I have an 10+ yr old Yamaha system and all the speakers incl the sub are wired. I am looking to upgrade my receiver as I finally upgraded my tv to an new Sony LED. So my questions is can I use banana plugs for the sub to connect to the receiver?

@WMU9898 12 дней назад

Hi Youthman, thanks very much for your DIY setup instruction. Do you mind to also make another video showing how to connect a Music Streamer to an AV Receiver? Currently I connect my Music Streamer to my AV Receiver using digital optical cable but the output of the sound from the AV Receiver to my speakers is very soft and the subwoofer is not working (i.e. no sound output to subwoofer).

@Bronson-Apollo 2 месяца назад

I have a pair of cerwin vega dx-7 with a pair of dx-3 sitting on top of the dx-7. I'm new to this and was wondering what inputs to use on the receiver and what formation to use in the setup up menu? I'd really appreciate some help!!!

@harsumeetsinghjosan 2 месяца назад

Very impressive video and a good set of knowledge for beginners like me. Thankyou so much for your video.

@Youthman 2 месяца назад

I’m really glad you found the video helpful

@seamannn577 7 месяцев назад

If you can give us some info about the mic & headphone jacks maybe not on this amplifier but some other have. Thanks for great video.

@johngibb5201 5 месяцев назад

Great video. Very simple and direct. I just purchased an Onkyo TX-NR696 AV Receiver which replaced my 18 yr old Onkyo that did not have HDMI outputs/inputs. My old Onkyo unit connected to my projector with component cables. Ive connected speaker cables to my new unit and ran HDMI cable to my projector. When I select HDMI on my projector, it says no “HDMI signal”. To set up my new Onkyo system I need to see TV screen but either the HDMI signal isn’t being sent from receiver or it’s not being detected by the projector. I know you did not demo Onkyo, but any suggestions? Onkyo printed material isn’t as helpful as i’d like. The only instructions it gives for initial set up is to connect to TV and then follow the prompts on the TV. I don’t use a TV, just projector….which isn’t projecting. I’m wondering if my new unit isn’t compatible with just a projector?? I’ll try calling their support line. Thanks again for the great video.

@GurbhaijSingh 9 месяцев назад

Thanks

@AlexosYou 8 месяцев назад

First of all thank you for the very helpful video especially for beginners. But there is one thing I don’t understand. Most of the AV receivers have reasonable power output only for 2-3 channels. What’s the reason? If I buy over 1000$ receiver I expect to have enough amplification. But in fact even for 5.1 if I am using mid range speakers, I have to set up two receivers just for amplification purposes. This seems strange. I have no place and budget for second amplifier. Now I am thinking just to continue using my sony ht-ct390 soundbar which sounds just great for its value instead of investing 2000$ for two receivers and speakers. I am not even sure if I will get noticeable difference. Another question I have is related to audio/video lag. I don’t find this information in specs, but it is very important for comfortable gaming. Are there any benchmarks for the input lag performed with single and double receivers?

@tdegrddeehjgd 2 месяца назад

Not all heroes wear capes.

@flesz_ 6 месяцев назад

what's the best way to connect PC to amplifier to have best quality when playing FLACs? My amp have optical in, so I thought maybe I could get audio card for PC with the optical out , do you think it's worth it or just mini jack out analog from PC to the amp would do without much difference?

@magrenge Год назад

This's the best instructor ever,keep up thank you.

@Youthman Год назад

Thank you for the kind words. I’m glad you found the video helpful

@jrorozco29 4 месяца назад

Thanks for you help👍👍👍

@Youthman 4 месяца назад

I’m glad you found the video helpful

@mightGalaxyBlackhole 2 месяца назад

Is it possible to wirelessly connect SA-RS3S as back speakers, connect SA-SW3 wirelessly, and also connect a wired center channel speaker in AN1000 Sony receiver model?

@tylere5817 2 месяца назад

Can we use Earc and connect everything to the tv?

@wayneross9723 2 месяца назад

Hi Michael, I managed to get another 15inch monolith cheap because he is moving to Canada we had a good test but when I got it home I couldn't daisy chain it I am getting no signal from either of the two front one's the led stays on red flashing but I did pull out the rca cable for the sub and it flashed green for a while, if I connect it directly to the amp it works, at the back it has line one and line two,the two front subs I connect the line one to my amp and I connect line two too line one of my rear sub. I am having trouble finding the manual but found the white gloves lol

@Youthman 2 месяца назад

The LED’s should not flash unless there is an issue with the amp. Hopefully that isn’t the case but I would recommend contacting Monolith support. You should be able to go from the sub out on your AVR to the Line in on one sub, then line out from that sub into Line In on the 2nd sub.

@wayneross9723 2 месяца назад

@Youthman just had a bit of sleep and while resting I went throw it in my sleep ,so will rerun it when I get back from work, if no joy then I have a b&w pv1 I shall test it out on. Thanks Ps I am running a marantz av8805 and two yamaha mx-a5200 aventage

@jaycastillo8743 9 месяцев назад

your videos are the best... may i know which speaker wire (brand) and gauge you are using? ty

@Youthman 9 месяцев назад

Thank you, kindly. I often use Monoprice 14 gauge, but I also have cables from Sewell - take a look here - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-R1GhvlIW2NE.htmlsi=FplI20SkB1a60XP-

@tundrawhisperer4821 10 месяцев назад

I need some assistance. I have cable box and a Roku, should both connect through the receiver first. But, when we want to just watch news or a TV show without going through all of our speakers how would we make this connection? We’d just like to use the TV’s speakers for news programs and regular TV shows. And is it possible to set up the receiver so that when we turn on the Roku box it “triggers” the receiver to come on automatically? Our receiver is a Marantz SR5010. Thx

@ferndogg4427 7 месяцев назад

Sooo if i wanna counnect soundbar to tv and a receiver (speakers) also to tv, how would i do it?, just for i can have a choice to either listen to soundbar or to receiver speakers or to both

@davidandambergarber6074 24 дня назад

I have a 6.1 receiver that I hope to use. If it's a 7.1 signal will it decode in 6.1?

@hugogomez1647 Год назад

Thank you for the info

@Dillithium Год назад

This is a great video! Even for someone like me who's had their system for nearly 7 years now, I still watch these video's and find more to learn. I'd love to see a video on specific media to test specific speaker additions. For instance, when I eventually upgrade to 4 Atmos speakers. What movies should I view to test them? Or what movie makes great use of side surrounds rather than rear surrounds? Or even the LCR set? Thanks Youthman!

@dragonsofnorway 26 дней назад

Hi. I have the Sony ta-an1000 but when i have connected the tv decoder to CBL/SAT but the sound out is not going to the center speaker but only to the front two speakers. I have a 5.0 speaker setup. I have my Apple TV connected to the media box and here i get full surround with speech through the center speaker. Any ide whats wrong?

@michaelschultze3595 7 месяцев назад

Thank You so much. You always learn something! I would like to know how to connect 2 floorstanding speakers in addition to the surround system, but only for listening to music (stereo). Where do you connect them? Because, the loudspeaker connections are already used for the cinema experience :-(

@Youthman 7 месяцев назад

Some older 2ch receivers allowed you to connect two pair of speakers (A and B) and you could toggle one or both pair on and off. You won’t be able to do that with an AVR. If you want that, I would replace your surround speakers with towers.

@michaelschultze3595 7 месяцев назад

@@Youthman Thanks. I have the AVC X4800H 🙈

@muhammadmutakabir 2 месяца назад

How do I connect 2 av amplifier together using 1 as a power amp. I am planning to use 3 channels. 2 main and 1 centre. Then on the other amp what output do I choose. Will the centre still work if I choose the 2 main input

@justinobello1378 9 месяцев назад

Question here ! I want to hookup my oldddddd receiver with surround sound to a newer projector, receiver doesn't have HDMI ports; there must be stereo cable to HDMI adapters that will work right??

@rabidcougar6465 4 месяца назад

I have a Pioneer Kuro TV, a Samsung DVD player and a new Denon AVR. If I connect the DVD player to the AVR via HDMI then the AVR to the TV via HDMI then the TV audio to the AVR via optical cable, do I then have to connect the TV directly to the DVD player? Or has that already been accomplished by the DVD to the AVR to the TV? I am asking because the DVD player only has one HDMI output.

@mym1217 7 месяцев назад

Definitely helpful video! Please explain me how the audio from the TV will return to the HDMI eArc port. How or what option on the AVR do I have to choose to listed to the audio coming from the TV? Thanks!

@Youthman 7 месяцев назад

This should explain it - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_CFNbzHYNJc.htmlsi=yLC0I-5IO_LQMGME

@dqitwithbrad 5 месяцев назад

Im on a craise on learning about stuff like this, I want a homa theatre someday

@Youthman 5 месяцев назад

You can do it!

@milospavic 5 месяцев назад

Hello I have speakers from the "Elite" DVD player. The player is broken, but I have speakers that I want to use. It is impossible to find the same used DVD player and I don't know how to use the speakers. Is it profitable to buy an amplifier and connect the speakers that way? The speakers are not of any quality, but they are 170w and have excellent bass. I don't know if it is more worthwhile to buy some used 5.1 systems or to personalize these somehow?

@firdausaqmar6542 5 месяцев назад

1 dumb questions, i just buy rx-a870 which use pre out sub, my old amp china one 2.1ch input 3.5mm jack and use passive sub, i dont have money to buy another sub so any idea how to connect rca-3.5mm directly to make do untill afford to better preamp and active sub. Thx

@damiangutierrez5272 4 месяца назад

Hello, i have a question that i need help with. i have a sony vlp vw100 and i don’t know how to set up the audio for it and ive looked everywhere but i can’t find an answer for it so i would really appreciate the help. Thank you!

@percybedford6266 Год назад

This is much needed. It would be nice to see the hook up of a processor.

@Youthman Год назад

I have a video on that - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-evYMGQyTY90.html

@percybedford6266 Год назад

@@Youthman Cool, you have it all covered.

@Youthman Год назад

I try. Much more to come

@johnsuggs8810 Год назад

If I use a receiver I upgraded from as an external amplifier will the quality of sound come from the old receiver (2014 onkyo) or the current receiver (marantz 7015) I’m just gonna amplify the Left and right channels. Thank you youthman

@shalenpestmanagement7160 Год назад

I love your videos, very informative. I am very frustrated with my home theater system. I have a Samsung short throw projector connected to a Denon AVR-S970H with 2 Klipsch tower speakers with atmos built-in on top, center speaker and 2 subs. I installed everything using your video. After the initial calibration the system played well. I then played some music from my phone via Bluetooth and from that moment I haven't been able to get sound through my speakers from my projector. I have tried everything. By the way, music plays fine. Please help. Thanks!

@Youthman Год назад

Unfortunately ARC and eARC can be a pain. Try going into the projector and turning off ARC. Then turn it back on and see if that resolves the issue with not getting sound from your projector to your Denon.

@shalenpestmanagement7160 Год назад

@Youthman I will try that and keep you posted. Thanks Youthman!

@PrinceMoon 9 месяцев назад

What about old sub (passive subwoofer) . The new avr only works with active sub So, in this situation, what we will do ? 🤔 Please let us know if there is any way

@user-jx3ve7gc3w 10 месяцев назад

Hey I have 2cd players that I'm getting no sound but hooked right. They're working.

@glennchaffin8446 11 месяцев назад

Great videos. I have the rack mount ears for my Onkyo TX-RZ50 ready to install in my rack. Is there a way to remove the feet from this receiver so it fits in my rack easier?

@Youthman 11 месяцев назад

Most feet can be removed from AVR’s’s or processors. You just have to be careful if they have ventilation on the bottom.

@glennchaffin8446 11 месяцев назад

@@Youthman Thanks for your quick reply. I decided not to attempt removing the feet. It looked like it was going to be more trouble than the extra 1U rack space it was going to provide. I'm going to install an AC Infinity cloudplate cooling unit under the Onkyo as well as one above it anyway. It was a lot easier to subscribe to your channel. Thanks again. 🙂

@slab817 6 месяцев назад

you have some good videos but i was curious how do i connect my old graphic equalizer to these newer av receivers?

@Deeky76 Месяц назад

These have built in equalizers, Don't try connecting a separate equalizer or you could run into a whole host of problems

@jeremycarter7902 Год назад

Question. I'm new to the thought of even trying to build a home theater. But the timing is perfect because we are currently building a home that will have a dedicated media room. The Media Room dimensions are about 15 1/2 ft wide, and half the room depth is 19'10" and the other half is 23ft, the ceiling is vaulted from 8ft to 10ft (highest point). Would you consider this a small theater room space? Also, do you think the room is big enough to house a 150" screen projector or bigger? Thank you

@Youthman Год назад

Hey Jeremy, that’s exciting. Your room is more than sufficient for 150” screen. My room is 13 foot wide by 19 foot deep with 10 foot ceiling and I have a 150” diagonal screen in 2.35:1 cinescope screen. Take a look at this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AubrsBu-2nU.html

@jeremycarter7902 Год назад

@@YouthmanThank you. I will check it out

@elloco271 4 месяца назад

Hi I have an lg 5.1 system can I have this reciever linked to the lg speakers?

@liamboggs 7 месяцев назад

Height 1, can be use for ceiling speakers, right?!

@josearqco 2 дня назад

What about to connect 2.1 active speakers to this AVR?

@Ali-s110 6 месяцев назад

I really want to thank you for all this clear and pro explanations. One question: By connecting the video source to AV HDMI, does the receiver amplifi the video signal as well as the audio the it send it to TV?? Or it's only a bypass and any quality comes from the video source will be sent to tv by AV receiver?

@Youthman 6 месяцев назад

HDMI carries both audio and video signal. I’m not sure what you mean by does it amplify the video signal.

@Ali-s110 6 месяцев назад

@@Youthman hi, We know av receiver improve the sound and then send it to speakers, does it also improve the video signal before sending it to TV?

@Youthman 6 месяцев назад

There isn’t much (if any) video processing in an AVR.

@mandypatel684 5 дней назад

I have onkyo HT R590 and have installed in my store but i want to connect to my tablet or my mobile to listen to the music can you help me pls 🙏🏼

@wregerg1 5 месяцев назад

This would be by first time setting up a surround sound system and I have started to connect my individual speakers to my audio visual receiver but my sub-woofer has inputs for cords to hook up to speakers as well. My question is should I just connect all of my individual speakers to my subwoofer and then connect my subwoofer to my audio visual receiver or should I connect all my individual speakers to my audio visual receiver and then simply connect my subwoofer to my audio visual receiver.

@audiodynamicsmaxsolutions 3 месяца назад

Connect all individual speakers to your audio visual receiver to its respective amplifer terminals and connect the subwoofer using RCA to Audio visual receiver subwoofer output.

@IAmEGBeatz 3 месяца назад

Say if you had a media switcher that could connect to RGB strips behind your TV which allows them to mimic colors on your TV. Would it be possible to connect the media switcher to the AVR to still receive the full capacity of HDMI 2.1 from the media source to AVR to the switcher to the TV? Or is it like a certain path you need to use in order to get that full capacity

@Youthman 3 месяца назад

I have never used one personally but something like this product might be what you’re referring to www.lytmi.co/products/lytmi-fantasy-3-tv-backlight-kit?gad_source=1&gclid=Cj0KCQjw2PSvBhDjARIsAKc2cgOd4MFZOIzJ5JD5_NbalLxms6YfFOHFeoFvUUmgjnsIdbr_07iaEHMaAvkXEALw_wcB

@IAmEGBeatz 3 месяца назад

@@Youthman I was actually looking at that one, I just want to make sure when I connect everything, it works perfectly

@Youthman 3 месяца назад

I would reach out to their support. Unfortunately I’m just not familiar with them

@alanriley9754 4 месяца назад

👏

@cerrense58 9 месяцев назад

Hi, quick question if you were so kind to assist. I've purchased a pair of Klipsch R-625FA Dolby Atmos. Now, they have TWO set of connectors on the back of each. I will connect one set of each speaker to each 'Front L and Front R' of my amplifier. What about the other set of connectors of the speakers? Any input will be appreciated. Thanks!!!!!!

@audiodynamicsmaxsolutions 3 месяца назад

Not worry about the others. You need to just go into menu and set the assignment as 2ch and disable other speakers. That's all.

@justin2icy 5 месяцев назад

Hi, if i already have prewires setup and there’s only 1 hdmi which is for the tv, how can I connect my Xbox? I have ceiling speakers and prewire setup in my pantry room but there’s only 1 hdmi available which is for the tv.

@india........ Год назад

good presentation👌,,

@Youthman Год назад

Thank you. We have a lot of guys that are new to the hobby or wanting to get into the hobby so I wanna make some contact specifically for them as well.

@india........ Год назад

this includes me,, recently i bought marantz 5015 with magnat speaker,,,

@gingercleary8 2 месяца назад

I had everything working great until I got the FireBox. Now only the FireBox works by showing images and sound through the TV and Receiver. I have a Samsung 3D TV, a Sony DVD player, an Xbox Series X, and a PS5 going through the Onkyo AV Receiver TX-NR676. I've tried connecting each of the devices through the receiver to the TV's HDMI port to no avail. I've been searching the internet and again I've not found a solution to this issue. Any help is greatly appreciated.

@bluepioneer3081 4 месяца назад

Dear I have a Yamaha DSP-AX530 AV amplifier. I have a problem that relates to sound coming from center speaker. I hear center speaker sound in both front left and right main speakers even when I detach center speaker from the amplifier. The center speaker slot gives sound anyway in both main speakers. Is it a problem or it is the way it sounds. Me from Pakistan. Thanks.

@lkjyuiop 9 месяцев назад

Having to pick a new stereo system out is hard now days I need lot of hdmi ports more than 6

@chekote 2 месяца назад

I was hoping you’d explain how to set up ARC. I have an ARC TV connected to the ARC HDMI but it’s not working, even though I enabled it in the settings in accordance with Denon’s instructions.

@Youthman 2 месяца назад

There isn't too much to setting up ARC. 1) Both your AVR and TV must have ARC or eARC HDMI ports. 2) Connect an HDMI cable to those two ARC / eARC ports. 3) In your TV's audio settings, enable ARC. 4) I fyou have a Denon or Marantz, go into your Video settings and make sure ARC is enabled. Let me know if that helps.

@chekote 2 месяца назад

@@Youthman thanks for the reply ❤️ Unfortunately, I did that already but it’s not working. I’ve been using this exact setup with ARC for a long time so I know everything but that is working fine. 😢 The TV is behaving as if it sees the ARC AVR and is sending the audio there. But I hear nothing. The AVR has HDMI control And TV audio switching turned on.

@jamesm568 3 месяца назад

I know I probably won't get an answer, but I have rear in ceiling speakers for dobly atmos so what settings on my receiver do I set to activate those speakers? Atmos enable or height speakers?

@Youthman 3 месяца назад

Hi James, which AVR do you have? Typically Atmos enabled is referring to up firing speakers that you place on top of your front left and front right speakers to bounce the sound off your ceiling and back down to your listening position. If you have a Denon or Marantz, under Speakers > Manual Setup > Speaker Layout, change Height Speakers to Yes and then choose Top Front etc. The diagram will show you a visual representation of where those speakers would be placed in the room. Let me know if that helps.

@jamesm568 3 месяца назад

@@Youthman I got the new Pioneer VSX-535 5.2. My rear surround sound is set to height for my rear in-ceiling speakers and my front in-ceiling speakers are on the front height channel set to height. I believe that's a 3.2.2 setup. Now I know I don't have any rear surround sound ear level speakers, but the virtualization on the unit does a good job at imitating them. I just want to make sure that my in-ceiling speakers are getting the Atmos channels.

@Youthman 3 месяца назад

When you check your levels in your AVR you will hear what channels it’s utilizing. You can also download this callout file - www.stereonet.com/forums/topic/470220-dolby-atmos-sound-check-dtsx-111-callout-clips/