Тёмный

Dodge caravan window stuck down! Door disassembly and regulator / motor replacement DIY! Dadmobile 

DADMOBILE Garage
Подписаться 6 тыс.
Просмотров 95 тыс.
50% 1

I used this regulator: amzn.to/43ARFab
Main page amzn.to/3VkweaQ
I am an amazon associate and get a small kickback if you purchase using my link!! Consider using these to help my channel grow!
***NOTE***My van requires 6pin regulator plug. Base model vans will use 2pin, all other will use 6pin. If you aren't sure you may need to pull yours OUT and look before buying the new part.
***NOTE***Sorry I missed addressing this in the video but my window was barely poking out and I was able to grab and pull it up. Wedged door apart a little to get my finger/tape onto the edge of it and was able to lift it and tape it up.
Not meant to be a perfect instructional, more to show that any person can look up the directions and do this. A few torx bits, couple screwdrivers, some tape and a part from your local shop. Save time and money! No way I wanted to drop this at the shop for a whole day or even two. I got it done in about 4 hours, and I was taking my time.

Опубликовано:

 

11 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 128   
@jaclynmarie5747
@jaclynmarie5747 4 месяца назад
I, a mother of three youngs, watch this and just smile at the amazingness that is Dads fixing things. First my own Dad, who fixed all his own vehicles, and now my dear husband, who undoubtedly will be fixing this same issue in my beloved dodge caravan. On behalf of wives everywhere, thank you for caring for us in this way. You are heroes
@Dou8leShot
@Dou8leShot 2 года назад
Thanks. Just finished mine. Note to others. Be ready careful when disconnecting the little orange and purple plastic clips from the door latch rods. If you break them beyond usefulness, the only way to get new clips is to buy the entire $100 door latch. Mine was slightly damaged but I was able to use a zip tie to keep the purple clip from coming loose from the latch rod.
@Black_Jesus3005
@Black_Jesus3005 5 месяцев назад
Thanks for the warning. Piece of mine broke will have to zip tie
@jamesgilbert8851
@jamesgilbert8851 Год назад
Thanks for the video! Saved a lot of money. I did however skip the part where you removed the whole inner panel. Did not want to mess with those rods that gave you a lot of trouble. I just had my wife swing it out slightly enough for me to get in their and change the track cable system! Works perfect now. Although i had to push down harder on the window than i thought to get it into the new clips. And for everybody wondering how to get the window up, all you have to do is take out the speaker and reach thru the hole and lift the window up.
@alexanderbleisch2661
@alexanderbleisch2661 Год назад
Your tip with the speaker saved my life. My driver side window fell down today, and I drove home at 7°C for half an hour with all heaters maxed out. Now I "fixed" it with your tip and 3M body shop tape. That offers me to use my car until the spare parts arrives. Thank you very very much!
@jamesgilbert8851
@jamesgilbert8851 Год назад
@@alexanderbleisch2661 yeah, I had to drive my daughter to soccer early in the morning when it was cold and had the heat cranked, BUT not that cold!! Glad my comment helped you. If you follow the video step by step it's pretty easy. I took pictures of every connection and screw I took out. Good luck with everything.
@PTBCANADIAN
@PTBCANADIAN Год назад
@@jamesgilbert8851 I actually used a cloth and pair of pliers to just grab the window and slide it out. This all looks rather complicated - I hope I don’t have to remove that second piece like you said, in order to attach the new part.
@theandyrichter2868
@theandyrichter2868 4 месяца назад
@@alexanderbleisch2661 Did you tape the window on the outside or from inside the panel? Mine is currently taped outside but my Wife hates how it looks.
@raven7068
@raven7068 Год назад
My cable for my window just popped. I just saw your video, and I'm not looking forward to doing the job😡 Update; Thank you for the video. I actually did the job, and it came out way easier than I thought. I didn't come across any issues or problems at all 😎👍
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
Awesome glad to hear it!
@joshd125
@joshd125 11 месяцев назад
Successfully replaced my assembly this morning thanks to you! Couldn't have done it without your video. Thanks!
@angussutherland4401
@angussutherland4401 Год назад
Thanks for the vid. It helped a lot. I agree with the guys who didn’t pull the inner panel all the way out. Was able to do mine that way and avoids all the downfall of disconnecting the linkage to the latch.
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
Bought another caravan and if it happens again I will use that tip too!
@KC__1997
@KC__1997 Год назад
My passenger window just did the same thing. Thank you for the information !
@Mekazas
@Mekazas Год назад
Your video was the saving grace today as my mom's van has that exact issue. Thank you sir! Very helpful indeed!
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
Glad it helped!
@SailingSarah
@SailingSarah 3 месяца назад
Dude, I rolled my window up and it got to the top, made a POP noise AND FELL INTO THE DOOR! IT'S 105° OUTSIDE! 😤🥵
@DADMOBILE_Garage
@DADMOBILE_Garage 3 месяца назад
NOOOOOOOOOOOOOOOOO!!!!!
@TannreDC
@TannreDC 2 месяца назад
Same here lol f Arizona
@DrPhil714
@DrPhil714 2 месяца назад
Same here in Carlsbad . 🥵
@threehonks1351
@threehonks1351 2 месяца назад
just happened to me🤣🤣🤣🤣
@SweetQueenAdelaide
@SweetQueenAdelaide 3 дня назад
Samsie. The kids are NOT letting me fix it and it sucks to try to fix as a single parent. 🙄😊
@samtexidor7003
@samtexidor7003 Месяц назад
Thank you, Sir. Appreciate you taking the time to make this.
@Justfor2day10
@Justfor2day10 Год назад
Great video but I’ll be taking mine to the shop or else I may total it with a sledge hammer! This project is for people with a lot of patience which I don’t have.
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
I probably wouldn’t do it again lol. We since replaced this van with another newer caravan…..hopefully the issue doesn’t come up again but it seems pretty common on these
@Justfor2day10
@Justfor2day10 Год назад
@@DADMOBILE_Garage haha! I actually ended up taking it apart and it’s sitting on my front porch. I’m going to try to tackle it this weekend 🤞
@Tierra96
@Tierra96 2 года назад
Tried this today and it worked, got my window fixed thanks for the video
@Kirbytherealgamer
@Kirbytherealgamer Месяц назад
For those rods that have you trouble, they should connect to the door actuator on the panel, before putting the panel on the door (Pink and orange clips first). Then you just make sure that they are pointing up when you put that entire panel on the door, and then you should only have to fuss with the white and yelo clips.
@Kirbytherealgamer
@Kirbytherealgamer Месяц назад
Mine gave me a bunch of trouble because AutoZone gave me the wrong part number, so I was trying to fit the wrong regulator on the door and couldn't figure out why I was having issues mounting it.
@michaelhagen9714
@michaelhagen9714 Год назад
Yay! Got it done and your video helped a lot. Did not take have to take out the door lock linkage. Went right to O Reilly and got the part. Took a pic of the wiring before disassembly which helped. Saved me tons of money! Can i get you a Starbucks card or something as a way of saying thanks?
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
Awesome glad it helped! Yes I will absolutely try it without completely removing the panel next time. The lock linkage is ridiculous. just added a PayPal donate button to my profile since I’ve been asked a couple times.
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
Thank you so much Michael 🙏😌 got your gift
@michaelhagen9714
@michaelhagen9714 Год назад
@@DADMOBILE_Garage My pleasure my friend. Appreciate your help for sure. Saved me $$ Loved how you even told me where to get the part. Keep posting, , great job!
@Mstreman53
@Mstreman53 Год назад
If you loosen 2 screws on the door panel closest to the henges you can decouple the entire harness without having to disconnect the individual plugs.
@juliabailey9033
@juliabailey9033 Год назад
Lol I’m watching this because mine just did this too, at a drive thru and it’s raining 🥹
@AugRINZ
@AugRINZ 2 года назад
Thanks for posting this. My window is broken similarly since I tried to open an iced up window. Now I know what to do.
@DADMOBILE_Garage
@DADMOBILE_Garage 2 года назад
Yw! It’s doable and saves money!
@AugRINZ
@AugRINZ 2 года назад
And I ran into the same issue as you with the key cylinder rod. Stupid design but I’m sure glad you documented it well. Done and dusted
@GeoffreyScott571
@GeoffreyScott571 10 месяцев назад
Thanks, man. This helped me get the problem fixed in a matter of hours.
@SnowboarderInLove
@SnowboarderInLove Год назад
Just used this video to show me what I was messing up in the process lol thanks much dude! Great video, did mine and everything was working perfect!
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
Awesome glad to hear it!
@xxthe_foxy_gamerxx6896
@xxthe_foxy_gamerxx6896 4 месяца назад
This just happened to my wife’s van door.. trying to follow this video.. Ty!!
@DADMOBILE_Garage
@DADMOBILE_Garage 4 месяца назад
Most welcome and good luck!
@angelzucchet8543
@angelzucchet8543 8 месяцев назад
Thank you so much for the video. Have the same problem and with this cold 🥶 is terrible. Only put the window up but now I know how fixer 😄👏🏽👏🏽👏🏽👏🏽
@blacknight-if4ex
@blacknight-if4ex Месяц назад
Thank you so much your video was very very helpful.
@moonmagi
@moonmagi Год назад
Thanks. This helped me get mine fixed within a few hours of it breaking.
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
Awesome glad to hear!
@damyjonill
@damyjonill 5 месяцев назад
Thanks, this video helped a lot. I'm a female so I'm ready to assemble it myself👏🏻
@DADMOBILE_Garage
@DADMOBILE_Garage 5 месяцев назад
Glad it helps! Anyone can do this if they can use tools.
@johntech263
@johntech263 Год назад
How to fix the window: take apart entire van. Lol.
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
🤣🤣🤣🤣🤣🤣
@scottweatherman3266
@scottweatherman3266 Год назад
Thank you for all of your hard work. Video helped.
@angelicayates1422
@angelicayates1422 3 месяца назад
❤ I’m gonna try to do it with the from my daughter and son
@donaldnaylor723
@donaldnaylor723 11 месяцев назад
Good video, my door won't even open because the window fell down in the door. I'm probably going to have to take the driver's seat out to get the door panel off to open the door smh. Thanks again for the video!
@DADMOBILE_Garage
@DADMOBILE_Garage 11 месяцев назад
Oh no! It must have disconnected the annoying little rod that attaches to the door lock on the inside. What a pain! Good luck!
@Kirbytherealgamer
@Kirbytherealgamer Месяц назад
If you remove the weather stripping and are able to get to that cable, pulling it should pop the door open
@JpattDaHebrew
@JpattDaHebrew Месяц назад
Thanks man!
@larrybrown9279
@larrybrown9279 Год назад
It's a 3-hour fix. Unless, you forget to put the door lock plug back in before you put the window in. If you forget to do that plastic manipulation with a pair of pliers. It's a $53 fix so do yourself.
@birdologytr3556
@birdologytr3556 4 месяца назад
Tried messing with my 05 regulator yesterday...nice to see 13 years later and it's still garbage just to get access in between the door panel such a pain... No wonder everything costs so much you break half the crap just getting in there ..
@DADMOBILE_Garage
@DADMOBILE_Garage 4 месяца назад
Yeah it’s a real pain. I’d rather pay someone to do this repair, but unfortunately every time I’ve dealt with a dodge dealer I have to leave the vehicle for multiple days. Still more time efficient to do it myself.
@birdologytr3556
@birdologytr3556 4 месяца назад
@@DADMOBILE_Garage 💯
@richardtulchin2608
@richardtulchin2608 9 месяцев назад
Thanks a lot Video was really Helpful!
@uzcanga
@uzcanga 2 года назад
Video is supposed to help with the windows suck done but you start the report part with the windows already up.
@Dou8leShot
@Dou8leShot 2 года назад
Use a suction cup.
@eviloctober
@eviloctober 2 года назад
Going through this right now
@DADMOBILE_Garage
@DADMOBILE_Garage 2 года назад
It’s a pain but it’s fixable at home!
@kingg1965
@kingg1965 2 года назад
Big help brother made a 600 dollar dealership a job a 60 dollar diy good looking out
@GospelGrill
@GospelGrill 8 месяцев назад
Great video, convinced me to pay a pro lol
@DADMOBILE_Garage
@DADMOBILE_Garage 8 месяцев назад
🤣 honestly I’m not sure I’d want to do it myself again
@leahborst2372
@leahborst2372 Год назад
What are the tools needed for this? Why are you using a T20 instead of just a screw driver?
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
T20 is what a lot of the screw heads are in the door. I suppose a flathead might still work but I already had the bits. Screw drivers/ torx bits, tape is all I remember using but to be fair it’s been a while
@Mstreman53
@Mstreman53 Год назад
The only way to reconnect the lock coupler is to remove the outsie door handle then it only takes a hour vs 10 hrs trying to connect from the inside
@larrycarroll6869
@larrycarroll6869 2 года назад
I paid $500 at dealer today to have this done - i thought it was easier job now I see video I don’t feel like I got hosed that bad
@DADMOBILE_Garage
@DADMOBILE_Garage 2 года назад
Yep it’s bit of a beast and a few hours work.
@szlyar
@szlyar Год назад
Mechanic said $700. So, I am going to try doing it myself, God Willing!
@franconoe10
@franconoe10 2 года назад
Thanks!!!!
@faikserifovic3719
@faikserifovic3719 5 месяцев назад
Thank you
@DefenderoftheCross
@DefenderoftheCross 10 месяцев назад
My window is stuck in the down position. You skipped the whole part where you raised it up to get to the tabs.
@toriblack835
@toriblack835 2 месяца назад
The only thing I don’t like about the vid is…HOW DID YOU PULL UP THE WINDOW? I took everything apart and I got to this part and my window won’t budge. 😵‍💫
@toriblack835
@toriblack835 2 месяца назад
3:40
@Kirbytherealgamer
@Kirbytherealgamer Месяц назад
I had to grab mine from the bottom I side the door and wiggle it up. Once I got it poking out of the top, I grabbed it from the top and pulled it up. I could have grabbed some tape, but I had some clamps that were like 3 ft closer
@cherylschermerhorn650
@cherylschermerhorn650 6 месяцев назад
Thanks!
@green461
@green461 4 месяца назад
So what was the initial problem? Obviously the window fell.... Why? How? What went wrong? What was broke?
@DADMOBILE_Garage
@DADMOBILE_Garage 4 месяца назад
Regulator cables jumped off the wheels/guides and tangled/broke….or they broke first not sure which came first
@tjflagler1434
@tjflagler1434 2 года назад
The car manufacturers should have done a better job when making this part so they were more durable. Good video.
@DADMOBILE_Garage
@DADMOBILE_Garage 2 года назад
Thanks, and agreed. This breaks way too easily/often.
@rayray2613
@rayray2613 Год назад
They made more money by using cheap plastic parts. Unfortunately Chrysler is going out of business because they still use this business practice .
@kimberlyrogers9953
@kimberlyrogers9953 Год назад
Crunchy popping noises lol Your wife’s words, I’m guessin lol
@jasonthertell5681
@jasonthertell5681 Год назад
I have a problem pulling window up to get to tabs it stops. Should I remove window motor?
@cchristiantouch1
@cchristiantouch1 2 года назад
Currently doing this now, what was the replacement part # from auto store?
@DADMOBILE_Garage
@DADMOBILE_Garage 2 года назад
I don’t remember sorry. I searched the store by make model and year and found the number that way and went it with a screenshot
@kristinaray5477
@kristinaray5477 8 месяцев назад
I have a dumb question and nowhere online seems to have the answer. I need to order my new motor and switch, but my window is stuck 4" down in the mean time and it's cold. Any idea how to manually force the window to stay up until I get the parts?
@DADMOBILE_Garage
@DADMOBILE_Garage 8 месяцев назад
It’s likely that the cables connected to the motor/window assembly have jumped the track/wheels and tangled up, jamming the whole thing. If it won’t budge by hand you’d have to remove the door card and try to untangle or cut the cables so that you can lift the window and tape it
@DADMOBILE_Garage
@DADMOBILE_Garage 8 месяцев назад
Or maybe use some clear plastic/tape to cover the open window.
@Vertigoneardeath
@Vertigoneardeath 11 месяцев назад
My 2017 Grand Caravan began doing some clicking noises at certain heights when the drivers side window was going up, only. The clicking sound began roughly about two months ago. The window still operated normally when traveling up. But the clicking sound was really bugging me. I had never had this happen to me. I thought that there may be a little pebble or debris in the track at this part of the guide making for the clicking sound. Anyway, Sept 19th 2023, the window went south. I was raising the window and it no longer wanted to run up. It also was beginning to slide down on its own. I was near my home when this happened and I opted to hold the window with my right hand and drove the 1/4 mile with my left hand. Now, I am in debate if I should fix the window, as you have illustrated. Or, should I removed all the paneling and inspect to see if it is actually the regulator. Nonetheless, thank you so much for this informative video. I'll get back to you and share what I decided to do.
@DADMOBILE_Garage
@DADMOBILE_Garage 11 месяцев назад
Good luck!
@Vertigoneardeath
@Vertigoneardeath 11 месяцев назад
@@DADMOBILE_Garage Sept. 20th 2023. Ok, status of regulator window assembly replacement. I installed the new regulator assembly and followed with the new motor. However, I noticed that the motor is securely tight. I kind of leaned on the bolts to ensure an extremely tight and snug fit. However, the motor has a slight wiggle. The wiggle is indicating that the motor and shell has a micro gap. Now, the wiggle is not alarming. Nevertheless, I know it should not have any at all. Should I add perhaps three space washers? Now, if I do, will it affect the depth of the motor gear and regulator gear in where the motor is not inserted to its proper depth? By the way, this is a monumental task. Thank you for the video and words of experience.
@Vertigoneardeath
@Vertigoneardeath 11 месяцев назад
@@DADMOBILE_Garage Sept. 20th 2023. Follow-up on wiggle of motor. The motor has a triangle leg (three bolts) around the motor that act as a securing housing or guide. I compared these three legs new against old motor. I noticed that the new motor had a hair or fraction of length compared to the old one. Perhaps the extra extension was a miscalculation in manufacturing. But before I do grind down the three legs I am going to dry fit the old motor to see what I find. What I am going to do is grind down these three legs a fraction of an inch to ensure the is no gap when tightening it down. Thank you.
@Vertigoneardeath
@Vertigoneardeath 11 месяцев назад
@@DADMOBILE_Garage Update - Sept 20th, 2023 time - 3:50 pm central. Motor no longer has wiggle. The vertical regulator has two 10mm bolts. I removed them from old regulator and installed in new one. Walla! No more wiggle. Thank you.
@Vertigoneardeath
@Vertigoneardeath 11 месяцев назад
@@DADMOBILE_Garage Dadmobile garage,....you are not going to believe this SHIT!!!!! After working all day on this project, installing, removing, dry-fitting, re-dryfitting, modifying the motor in order for it to have no wobble, I am finally on the last part of finishing, which is setting the window on its tracks and locks.....AND GUESS WHAT. The plastic lock snapped and broke clean off. I called Autozone and told them what just happened. They will give me a new regulator set no questions asked. However.....the time and hard work plus the headache, backache, sweating, shortness of breath, lightheadedness and what ever other ailment you want to include --- what about that?
@604roger
@604roger Год назад
I did that Now my van window only opens halfway? Fault part or faulty me?
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
Oh no! Has to be assembled wrong , unless it’s the part for the back door. Not sure if that is possible.
@mominbata5775
@mominbata5775 Год назад
How to get the white holder off at 3:56.
@Chuckn0ris
@Chuckn0ris 2 месяца назад
Man wish they built shit to last. It seems like everyone is having this issue , dodge should be doing this labor for free! 😡
@DADMOBILE_Garage
@DADMOBILE_Garage 2 месяца назад
Yeah seriously. This is by far the most viewed/commented video I’ve posted.
@ABOLISHATF
@ABOLISHATF Год назад
Replaing mine currently on my 2016
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
Good luck!!!
@javierfigueroa5573
@javierfigueroa5573 Год назад
How many pins is a 2012 ? 2 or 6 pins?
@DrPhil714
@DrPhil714 2 месяца назад
Mine is 2014 I’m asking the same thing here?
@airquad1929
@airquad1929 24 дня назад
Your window is up???It's says window stuck down In headline???
@DADMOBILE_Garage
@DADMOBILE_Garage 24 дня назад
the tip of the window was sticking up, i grabbed it and lifted it with tape on the window and pliers. otherwise you have to remove the door panel and lift it through the speaker hole.
@FTKDeLaVega
@FTKDeLaVega 2 года назад
Have similar problem. How did you roll up the window to tape when it’s not rolling up?
@DADMOBILE_Garage
@DADMOBILE_Garage 2 года назад
Sorry I missed addressing this in the video but my window was barely poking out and I was able to grab and pull it up. Wedged door apart a little to get my finger/tape onto the edge of it and was able to lift it and tape it up.
@DADMOBILE_Garage
@DADMOBILE_Garage 2 года назад
********************** Sorry I missed addressing this in the video but my window was barely poking out and I was able to grab and pull it up. Wedged door apart a little to get my finger/tape onto the edge of it and was able to lift it and tape it up.
@katarinaarn
@katarinaarn Год назад
Im just having a really hard time unclipping the button from the door
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
This project is really a pain. I’m not sure exactly which part you are referring too….it’s been quite a while since I did this so it’s not fresh in my mind
@birdiifohtwentii3740
@birdiifohtwentii3740 2 года назад
He picked it up most likely and wedged it
@DADMOBILE_Garage
@DADMOBILE_Garage 2 года назад
Yeah I wedged it up and taped it to hold it up . I honestly can’t remember it’s been a while now. I see that I messed up the vid for that part and people have pointed it out a few times. Eeewps. 🤣
@birdiifohtwentii3740
@birdiifohtwentii3740 2 года назад
@@DADMOBILE_Garage literally got this problem today and just felt the need to say something haha
@marvincox4352
@marvincox4352 Год назад
Anyone got the part number(s)? My SIL has the same problem with her 2016 Caravan. Appreciate it!
@marvincox4352
@marvincox4352 Год назад
Edit: 2015 Caravan
@DADMOBILE_Garage
@DADMOBILE_Garage Год назад
I don’t have it on hand but the way I found mine was via autozone entering year/make/model search tool, and looking at ‘window regulator’
@halfisher3598
@halfisher3598 2 года назад
What planet are you on when you state your window fell down in, but the very next frame it shows it all the way up? You’re just fing with me right? Mine frll down in and will not just magically be up again when I turned my head.
@warwicktammy
@warwicktammy 2 года назад
I've been working on mine 2 days now. I'm tired and hot. Come fix mine Please!!! I'm into it so far now I'm committed but totally lost!! 😭😭
@halfisher3598
@halfisher3598 2 года назад
It’s actually not that bad after you’ve done it once.
@tomgawne4779
@tomgawne4779 Год назад
You're an idiot
Далее
Dodge Caravan Window Regulator Replacement
13:36
Просмотров 4 тыс.
The Truth About Dodge Grand Caravans
10:32
Просмотров 431 тыс.
Car Window Stuck Down - How to Fix Power Window
5:26
How to SUPER CLEAN your Engine Bay
21:58
Просмотров 51 млн