Тёмный

Dodge Dart Brake Caliper Noise 

Desert Car Care
Подписаться 14 тыс.
Просмотров 205 тыс.
50% 1

We deal with a variety of noise related concerns that can come rolling in to the garage. This Dodge Dart was no exception as an odd rattle was clearly evident from the front of the vehicle.
Driving over rough patches of road surfaces and speed bumps was when the culprit noise concern would rear its ugly head.
A simple road test over speed bumps and we were able to distinguish the rattle and isolate a general area from the wheels as to were it was coming from.
Getting the vehicle hoisted in the air we did quickly determine that the brake caliper was excessive in movement when not applying brakes. Now in most occasions as per the design of the brake caliper their will be some slight movement, but in this case, too much and subsequently the noise source.
Anytime we determine the source of a fault we will research information regarding technical service bulletins (T.S.B) as well as any potential open recall information. This allows us to ensure that we are not missing any updated designs to fix or more importantly make sure the repair is not a current RECALL candidate. It is important that you do the same before diving in to repairs.
There are many websites claiming Recall information ,however go right to the regulated source ,as there will be less ambiguity.
NHTSA Recalls for the Dodge Dart : (Type in the V.I.N; you can find on the drivers side inner door ; and the current recalls will populate) www.nhtsa.gov/Vehicle+Safety/R...
There is a Recall regarding brakes for a brake booster concern, but not a brake caliper noise concern.
T.S.B for the Brake Caliper concerns : #SB-05-004-13
If YOU need a copy ( you in most occasions have to pay through various websites from what is currently out there) just contact me in the comments and I can send to you.
Appreciate the great recent comments and questions and to all of our recent subscribers. I love doing these vids and will kick out weekly. Here are few more vids to check out :
Inside the Garage Videos :
Kia Hub Bearing : • Kia Hub Bearing Inside...
Coolant System Oxidation • Engine Coolant System ...
76 Corvette Repairs : • Classic Car 1976 Corve...
Oil leaks www.youtube.com/watch?v=if5KO...
Timing Belt Tips : www.youtube.com/watch?v=LlQzs...
Follow us on FaceBook : / desertcarcar. .
On Twitter : / desertcarcare
Website : www.desertcarcare.com/

Авто/Мото

Опубликовано:

 

22 авг 2016

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 205   
@elenasolis5804
@elenasolis5804 5 лет назад
Very informative. Plus, I like the way you explain things, Frank. And I like the way you speak.
@7200generalrepair
@7200generalrepair 5 лет назад
good content man, like the flow of your info and its reassuring that you were in an active shop too!!
@kramer5702
@kramer5702 4 года назад
Well, you just solved my problem hopefully. I just did new brakes on my wife's 2015 Chrysler 200 with new caliper pins and grease and still have a loose caliper. Going to go through the service bulletins and recalls right now. Thank you!
@mrajj1261
@mrajj1261 3 года назад
You my hero i replaced the cv axle and checked all suspension didn't fixed until saw your video. Because was clicking so bad when i was breaking, i didn't replaced the caliper i just replaced the caliper braket because the 2 bolts where worn out a lots of movement, the issue its fixed thank you very much thanks for posting this video you save me a lot of money i was trying to sell my car but people tried to low baller me thank you so much
@dakotabritton75
@dakotabritton75 5 лет назад
So glad I found this I have the same exact problem and the dealer told me it was normal for the brakes to sound like this
@Crocestrans
@Crocestrans 7 лет назад
Nice job as always Frank!
@Desertcarcare
@Desertcarcare 7 лет назад
Thanks for stopping by! -Frank
@joselnunez7440
@joselnunez7440 2 года назад
I have a 2019 jeep grand Cherokee limited x 5.7 with HD brakes . This video helped me out figure the banging noise i had on left front caliper
@daver20007
@daver20007 4 года назад
Thank you I was going nuts trying to find that noise
@Desertcarcare
@Desertcarcare 8 лет назад
The biggest takeaway here...research beforehand. Trying to dial videos in the best I can with a busy load at the Garage. Appreciate you guys hanging. Rock on.
@dominus2361
@dominus2361 6 лет назад
Same noise and location coming from my 2013 dodge dart, thank you for this video really helpful.
@Desertcarcare
@Desertcarcare 6 лет назад
Dominus 23 ~~glad it all worked out brother ! Join us over at @wrenchnation ~~Frank
@francisbaluca7912
@francisbaluca7912 4 года назад
You can't fool us John Cena! Kidding aside thank you for informative and well explained video :)
@DavidArroyo78
@DavidArroyo78 5 лет назад
Thanks for this video! I have the exact issue and I was definitely headed toward the brakes and you just confirmed it for me. New calipers and pins coming my way....
@Desertcarcare
@Desertcarcare 5 лет назад
Glad it helped ! Call us anytime at the garage if you have any questions --Frank
@naimulhasan7614
@naimulhasan7614 5 лет назад
Desert Car Care I change my rear break pads and left rear caliper . After changing it making noises when I drive Whats the issue let me know please
@DavidArroyo78
@DavidArroyo78 5 лет назад
Naimul Hasan I took his advice and replaced the Autozone brake pads with OEM and the noise 100% went away. It was the pads all along. The little metal clips that come with the pads was the key to the issue. The OEM pads come with metal clips that have a spring tensioner in them that separate the brakes from the rotors while the autozone brakes didn’t. So when I let off on the bakes, the AZ brakes kept making contact with the rotor causing chattering while the OEM pads no longer made contact. Those little metals clips believe it or not are so important. Let me know how you make out.
@jaylee5643
@jaylee5643 4 года назад
Can u just buy the pin? I just replaced my pad a couple months ago.
@Shosui
@Shosui 4 года назад
In case you haven't found an answer yet: yes! Caliper guide pins can be bought separate from a full assembly. They typically come as a set of 2 guide pins and 2 bolts to completely replace the old ones on a single caliper. These usually DO NOT come with the rubber boots that go on the pins, and are also sold separately.
@gloriabarragan8238
@gloriabarragan8238 2 года назад
Tanks for you information
@hippievato
@hippievato 6 лет назад
I have this same problem on my Chrysler 300. I swapped the caliper for a new one I got at Autozone and its still got play in the caliper. Maybe it was just faulty, I guess I should warranty it out and see what happens. Awesome video man.
@slimskinny
@slimskinny 3 года назад
I've replaced the whole front end on my cadillac, and i still get this violent gas pedal shake when I hit bumps. Also I hear like a metal whirling sound when driving, and my steering wheel shakes at highway speeds even after alignment and balance. Also the more I drive the worse it seems to get epically when it's hot outside, and it is some type of fluid or water that comes from the bottom of it after driving it. Could this be the brake calipers are seized? I have replaced everything on the front end, I did buy the car used also.
@chuanni6201
@chuanni6201 6 лет назад
Great video!
@Desertcarcare
@Desertcarcare 6 лет назад
Chuan Ni..thanks for stopping by ! ~Frank
@rajavideo4319
@rajavideo4319 5 лет назад
Thanks super explain!
@OscarDiaz-nn9ch
@OscarDiaz-nn9ch 7 лет назад
I got the same exact problem with mine its also a 2016 model and it makes that noise when I use the breaks and when I turn the wheels to both directions, but everything else is good the car is very smooth and fun to drive! thanks for the video man!
@Desertcarcare
@Desertcarcare 7 лет назад
oscar diaz ...thanks for stopping by ! Always here to help ~~Frank
@TheJavonholt
@TheJavonholt 4 года назад
I believe this has to be the problem with my car and soon as I look up brake caliber noise a Dodge Dart pops up wow isn’t that something. I had my Dodge Dart serviced the struts and sway bar links replaced thought the noise was coming from the strut mount or spring but I don’t hear the noise when I apply pressure to the brake pedal. So this definitely have to be the issue in my 2015 Dodge Dart
@longelevenandahalfdong9586
@longelevenandahalfdong9586 4 года назад
This is John Cena's dad
@ceo20561
@ceo20561 4 года назад
🤣🤣🤣🤣🤣🤣🤣
@tashawnuatilmon8312
@tashawnuatilmon8312 4 года назад
😂😂😂
@vickersfanxoxoxo
@vickersfanxoxoxo 2 года назад
Who? There's no one in the video. I thought that was odd. 🤔
@atomicpunch723
@atomicpunch723 Год назад
Facts 💯 😂😂😂😂
@kemfacts
@kemfacts Год назад
@@vickersfanxoxoxo I can’t see what you did there
@ralphe14
@ralphe14 4 года назад
Would you recommend a transmission fluid change on a 2013 ford escape 1.6 ecoboost with 95k miles?
@kauk1488
@kauk1488 7 лет назад
Omg your are legend dude exactly same issue with toyota prius i will change the pins now
@Desertcarcare
@Desertcarcare 7 лет назад
X6KAF Vlog ..rock on. Glad you stopped by & it all works out . Thank you. ~Frank
@mtbco8767
@mtbco8767 Год назад
Thank you sir!!
@corporateragnar5940
@corporateragnar5940 7 лет назад
great video thanks
@Desertcarcare
@Desertcarcare 7 лет назад
..thanks for stopping by!
@porksniffer
@porksniffer 6 лет назад
My 2010 1.8L Vibe/Matrix rears are doing the same thing. I bought aftermarket slide pins Dorman HW14470 everything is bolted down but the caliper still moves. Are both guide pins suppose to have the rubber o-ring bushing at the tip or just one of them? The originals were pretty corroded so I tossed them and can't remember which has a bushing and/or which goes on upper/lower on the bracket?
@BossMan-yu1og
@BossMan-yu1og 3 года назад
So, I regretfully overtightened one of my guide pins for a new caliper install and snapped the bolt in the process. I have purchased replacement pins for the caliper however, in my mind I'm thinking I can just swap out the pin boot from the one that I damaged instead of purchasing a whole new set of boots. Yes or no? If yes, then why if the boot is brand new anyway.
@rogerbrown9924
@rogerbrown9924 2 года назад
Thanks that was perfect
@starkiller2002
@starkiller2002 4 года назад
Helped me identify the exact same issue on my 2015 dodge challenger. Thanks a lot!
@Desertcarcare
@Desertcarcare 4 года назад
Ulises Venegas ~ rock on < glad it helped !
@richardpizzahut08
@richardpizzahut08 4 года назад
My car drove perfect I got a brake job done know my car feels like something is majorly loose. When you tap the brakes you feel and hear a lose popping sound. It's bad enough I also have a parasitic battery drain.
@Desertcarcare
@Desertcarcare 4 года назад
Richard Johnson ~ definitely recheck brake work ! If you need further help let me know ~
@richardpizzahut08
@richardpizzahut08 4 года назад
@@Desertcarcare I have a 2010 Dodge Challenger I bought the car used and knew if would have a few issues, but the; motor, tranny, and suspension was strong. I do have a parasitic battery drain, that drains my battery every 1-3 days? The car coded out for a cooling/heating fan relay. That hasn't been put on yet do to the mechanic not being able to find out where it goes. Second it coded out for a bad alternator that happened about a week after I bought it. Replaced it and also had the front and back brakes done. That being said after the brake job, now my car feels like there is something loose in the front right drivers side? When you tap the brakes it feels like the calipers are loose. Before the brake job the car drove imaculatly. I can't win for lose. It also has a leaking powerstering unit. And....
@richardpizzahut08
@richardpizzahut08 4 года назад
Can ypu send me any recalls on my car. I don't have a computer all I have is my cell phone. I live out in the sticks. Lol
@cdwwillow9671
@cdwwillow9671 4 года назад
Suzuki alto gf model has this problem too. But much worse . When going over a bumpy road sounds like the whole front ends falling out.. But only caliper slide pin bolts , hi from Australia 👍😊
@BumpyBaluga
@BumpyBaluga 3 года назад
Literally diagnosed the clunk in my Subaru Legacy, looked up the TM, replaced calipers, boom!!! No more clunk, thank you!!!!
@Desertcarcare
@Desertcarcare 3 года назад
Glad it all worked out ! 👊🔧
@salvatore_davi
@salvatore_davi Год назад
Out of curiosity, would this be the same issue if your caliper chirps on a hard stop then a sudden hard acceleration? I noticed my caliper chirps at times.
@bellalisah8174
@bellalisah8174 3 года назад
Can You Do A Video on a Dodge Dart 2016 Wheel Bearing Hub & Assembly - Im hearing a Noise coming from mine and it sounds like a ticking coming from my chasis ...????
@Medusaa92
@Medusaa92 6 лет назад
May i have a copy? I have a stx 2015 Dart and having clicking noise with back left tire
@crazys8s
@crazys8s 2 года назад
So I replaced my caliper guide pins. But it still clack clakcs when I go over bumbs. I looked at the "hardware kit" and it's got the 2 rubber boots but then also 2 smaller rubber... Grommit looking things.... No idea where those go. Any clue
@tahiro101
@tahiro101 3 года назад
Had clucking thinking it was my rotors but it really was just a loose caliper bracket... took me 3 months to figure out the noise lmao fml
@tashawnuatilmon8312
@tashawnuatilmon8312 4 года назад
I have a 2008 Dodge Caliber. that’s the same exact noise it’s making definitely going to try this.
@Desertcarcare
@Desertcarcare 4 года назад
Double RT TV ~ should be simple enough ~ good luck here 👍
@ericbunn9824
@ericbunn9824 4 года назад
hello my brother got 2013 dodge dart and everytime he stop at the light a horn like sound u can hear inside the car then he release the brake the sound stops just wondering if anyone can help me find out what that sound is
@markulanday2781
@markulanday2781 2 года назад
is this pretty similar with a 2017 jeep cherokee? or do you think i could just replace bolts to tighten the caliper?
@whoucallinstupid
@whoucallinstupid 5 лет назад
Ok I ordered the parts related to the service bulletin yesterday and the parts came today. The parts did not come with new slide pins. I had a professional mechanic install the hardware which includes a caliper bracket, some springs, and bolts. There weren’t any slide pins included in the TSB. The noise is still there but not as bad, is this because they didn’t include new slide pins? Help please I’ve been living with this god awful noise for way to long. I’m in a 2013 Dart Mopar edition.
@dainbender7578
@dainbender7578 4 года назад
I’m having the rattling pad noise in my 2015 Chrysler 200s. I just put new pads on it. Do you know if I can buy just the caliper guide pins and the oem brake pad hardware? Thanks!
@AutOdometer
@AutOdometer 7 лет назад
Nice man. I have an awful squeal that I took into Meineke a while ago I mean like more than a year ago. I had them check it out and they just wanted to charge me $700 to fix it all. I just had the bare minimum done. This incident made me get into car repair myself. Anyways.... the squeal is still there and it MOST definitely seems to be on the driver side but I have investigated both driver side brakes.. drum and disc.. and see nothing wrong. I am just driving on the squeal. If I find the problem ill make a video on it.
@Desertcarcare
@Desertcarcare 7 лет назад
...totally understand. Repairs should be broken down & managed. Rock on with your future as a wrench..always here to help ! -Frank
@snakeyscorpio1
@snakeyscorpio1 7 лет назад
Great vid. I'm hoping you can help out. I have a 2016 1500 sport model with the 8spd/hemi. I am hearing a rattle from the passenger side rear, possible the exhaust, but not 100% sure. It happens mostly on cold starts and the rattle used to go away somewhat as I drove and the truck warmed up. Now I hear it consistenly, especially over bumps. I haven't had this truck long, and started noticing this rattle as the weather got colder. What could this be? Again, it seems it is coming from the right rear of the truck, possibly behind and/or below the cab. Thanks again.
@Desertcarcare
@Desertcarcare 7 лет назад
Paul ....give me a ring at the Garage. Best to walk through over the phone...480 726 6400 -Frank.
@scitzen
@scitzen 7 лет назад
iv got a lancer thats making a noise over bumps but when you break a little it stops was thinking breaks but now ill check it out tomorrow and see if its the same as this dart, cheers for the video
@Desertcarcare
@Desertcarcare 7 лет назад
scitzen ...that would be be a great start. Don't forget to check those struts & strut mounts ! Thank you for stopping by ~~Frank
@scitzen
@scitzen 7 лет назад
Desert Car Care yeh its definitely the rotor slight warping has gotten worse but im still driving it like normal lol but dont be worried im getting a new car and the rotor will be sorted before i sell it
@yovanyarroyo3110
@yovanyarroyo3110 7 лет назад
scitzen
@scitzen
@scitzen 7 лет назад
Yovany Arroyo yes?
@tonycharron73
@tonycharron73 7 лет назад
FIRST- Thanks for taking time to post your videos! So much help for people trying to diagnose. Similar issue for me on our 2012 Chrysler T&C. Doing a brake job... took caliper pins out to regrease and noticed 2 different styles being used: 1 standard pin, and 1 pin with a suspension bushing (not the caliper boots). The pin with the bushing is seized up on 3 of 4 of the wheels. Looks like no grease ever from the factory. The standard pins still had grease and move freely. Can you explain these pins with bushings... why they exist, how to lube them properly and should they slide freely likw the ones with no bushings? Ive searched the internet and no luck finding information. THANKS AGAIN FOR WHAT YOU DO! - Tony (Michigan)
@Desertcarcare
@Desertcarcare 7 лет назад
Anthony Charron ...I will be back up & running more videos in September & will select this very comment & demonstrate. In the meantime get those updated components & stick with Mopar. Additionally oxidation can wreak havoc on these caliper slide points. Hope this helps brother! Always at the Garage if you have questions. ~Frank
@RebelRob34
@RebelRob34 3 года назад
Mine has this on the passenger side (2014 Dodge Fart, 80k). LOUD rattle over bumpy pavement. Bolts are tight, but the play is like this one. Got a job for this weekend I guess. Should I replace both?
@larrywoods2304
@larrywoods2304 Год назад
I like this video because the Dodge dart might be my first car to buy 😊
@sams8603
@sams8603 2 года назад
Hey frank, got the same problem 13’ dart, but also has a violent shake in the steering wheel when braking above 45mph…rotors are not warped and in good shape, Could the shaking be from the caliper being worn/loose? Thanks.
@supercalibragulistic
@supercalibragulistic 4 года назад
Mine make noise when brecks has new calipers new brecks idk what could it be. But the bearing are tide non movements .
@ermelindaleal5315
@ermelindaleal5315 2 года назад
I have a Dodge Dart 2013 and when I put it on drive with my foot on park it sometimes makes a trembling noise. Can you tell me what it could be please? and thank you in advance
@RaduMichael
@RaduMichael 6 лет назад
Hello! Sorry for bothering you. I have a similar play on my rear axle caliper on a Mitsubishi Lancer. I replaced the caliper sliding pins but the noise is still there. Caliper brakets can be repaired? I can't seem to find any after market ones as the original costs a fortune, I replaced both sides a year ago and the noise returned. I don't want to spend again 2 hundred dollars on a single bracket....I tend to think the quality is really poor... What should I do? The car is 3 year old, it's practically new....
@Desertcarcare
@Desertcarcare 6 лет назад
Radu Michael ~~ring me at the Garage ~I will jump in with you & try & find a reasonable solution .
@jarretguercia1467
@jarretguercia1467 6 лет назад
Can you please send me info on the calipers I am having same issue
@AggressiveNugget
@AggressiveNugget 3 года назад
Had my calipers replaced many times from the dealership. The shop foreman finally came for a ride a long and told me flat out that they can continue to fix it but no matter what it's going to continue to come back. Had my dart since 2015. Its now 2021 and it's still an issue, with no recall
@ernierodrigues5789
@ernierodrigues5789 11 месяцев назад
WELL watch more videos and fix the caliper pins yourself.. theres several good videos that show how to fix the noise
@joeymucha09
@joeymucha09 7 лет назад
hi currently having a weird ringing whistle noise when car is moving mostly slower friend said sparks were coming from wheel area I'm thinking it might be caliper thoughts?
@Desertcarcare
@Desertcarcare 7 лет назад
gregg jonaa ...pull that wheel & investigate immediately...ouch. Sparks ? There is some binding on metal for sure there...keep us posted ..let us know what the fix was..-Frank
@brandonodonnell4533
@brandonodonnell4533 6 лет назад
Hey guys ! Big issues with the Dart 2.4L caliper is very noisy and has tons of play they say it's just because there on gliders or something like that to me sounds almost like a bad sway bar bushing or link rod can I please get sent a copy of the bulletin
@Desertcarcare
@Desertcarcare 6 лет назад
Brandon O'Donnell call me at the Garage for help here~also Check in the comments here ~there is a TSB for the brakes|noise if that is the case with your symptom
@richardpizzahut08
@richardpizzahut08 4 года назад
I just my brakes done and they are doing the same thing sounds and feels like something majorly lose. The car was fine before my brake job.
@sreekumarv341
@sreekumarv341 5 лет назад
I have the same problem but the dealer insisting to change strut and associated accessories. Showed TSB but still not ready to check caliper as you did. Took it to another place they could not find any fault with struts. The problem still not solved.
@TheMELTDOWN911
@TheMELTDOWN911 3 года назад
yeap! thank man! this is the problem with my 2015 Chrysler 200C
@richardpedroza4301
@richardpedroza4301 5 лет назад
why is my rotor loose? can wiggle it with tire off. HELP
@ebebimik
@ebebimik 3 года назад
so the fix is get new guide pins or a whole new calliper assembly?
@FrankieTheGent
@FrankieTheGent Год назад
Frank Happy Holidays man, I have a 2013 Dodge Dart SXT over 120K miles on it, there’s a chirping/squeaking noise while Im driving. My mechanic replaced a hub bearing and a strut/shocks but the squeakings still there, any ideas what else it could be? Much appreciated thanks
@sr20dett1000
@sr20dett1000 6 лет назад
Why does the rotor have 10 bolt holes?
@matthewlarsen7000
@matthewlarsen7000 7 лет назад
Sounds like the problem I have on my 1998 Holden rodeo cheers
@Desertcarcare
@Desertcarcare 7 лет назад
Matthew Larsen ..cheers ! ~Frank
@cooldaddy1973
@cooldaddy1973 5 лет назад
Where does one check up on recalls and technical service bulletins you mentioned?
@ChutneyInc.
@ChutneyInc. 4 года назад
Hey Frank and guys i just installed new calipers and pads on my miata. I know we definitely over tightened the caliper bolt on the passenger side. And the hardware/shims sent with the pads resemble the oem but the center/triangular portion of all the shims seem to be rubbing the rotors. There is an unbearable noise now. I would like to know what you guys and dudetts may think. My hearing is fried due to many years in navy flight decks so tracking sources of sound is challenging
@Desertcarcare
@Desertcarcare 4 года назад
CHUTNEY 2020 ~ first off THANKS for your service! We hate to say it ~ but will need to start from scratch here. Without the ability to actually see it first hand ~ tough to say ~ sorry
@ChutneyInc.
@ChutneyInc. 4 года назад
@@Desertcarcare no problem. The noise has mostly left. I'll bend the excess material of the shims back so they don't rub then get new rotors so it will all be new [calipers, pads, rotors, lines, hardware] then bleed several times. And I'll loosen the the caliper bracket
@lupemartha9878
@lupemartha9878 7 лет назад
My Car Recently Started Making A Grinding Noise Everytime I Would Drive, I Changed The Brake Pads The Rotors And It Kinda Stoped, Now I Only Hear Thr Grinding Noise Sometimes, Especially If I Go Over A Pot Whole, Also If I Have My Car Parked For A While And I Push It With My Hands Back And Fourth You Can Hear The noise, So Idk If It Can Be The Caliper Or Wheel Bearing?
@Desertcarcare
@Desertcarcare 7 лет назад
Lupe Martha .. Wheel Bearing : When driving & hearing that noise should slightly change when steering left to right. Brakes : Make sure rotors don't have imperfections & new brake pads are good quality. Reach out if still a problem frank@desertcarcare.com ✌🏻️
@lwandilebaliti2595
@lwandilebaliti2595 Год назад
I think this is the very noise I hear from my opel astra. It's exactly sounding the same, like two metals hitting each other on uneven surfaces but not on spped humps for now. Ama do thi check myself tomorrow cuz the other guys from garage just couldn't figure it out.
@bik0304
@bik0304 6 лет назад
Same issue on my Chrysler 200. So can I just replace the caliper push pins?? Or should I replace the entire caliper assembly??
@Desertcarcare
@Desertcarcare 6 лет назад
bik0304 ~ best to go with the complete assembly
@johnmoore5431
@johnmoore5431 7 лет назад
I'm having this exact problem, thank you so much! After three misdiagnoses and tons of research I found your video. The front brakes rattle over bumps but the slightest braking pressure causes the to be quiet. Now just to get it fixed, would replacing the calipers entirely fix this? What's the best route that won't cost an arm and a leg? Suggestions would be greatly appreciated. Also can I get that TSB? Thanks again.
@Desertcarcare
@Desertcarcare 7 лет назад
John Moore ...awesomeness! They can be difficult to isolate..those darn noises LOL.Here is the bulletin number : SB-05-004-13. Glad it helped ya ! ...stay tuned..will have more tips soon. Rock on. -Frank
@brandoneberlin1694
@brandoneberlin1694 6 лет назад
Do you have a part number for the updated design and did you have to change the whole caliper and caliper bracket or just the slide pins ? My wife's drivers side is making the same noise and we just replaced the brakes as the rotors were badly warped. Her car is a 2013 dodge dart rallye 1.4. Thanks for the awesome video. I always do my own work on my cars but this noise had me stumped. I believe it to be the same issue we are having.
@Desertcarcare
@Desertcarcare 6 лет назад
Brandon Eberlin no part numbers off hand -however here is the TSB ~05-004-13 ~stating caliper brackets, spring clips and pads if necessary~sorry for delayed response here~hope this helps !-Frank
@brandonweis2884
@brandonweis2884 5 лет назад
Exactly the same issue I have
@ClunkGam1ng
@ClunkGam1ng 7 лет назад
i have a 2013 dodge dart (same color as that one lol) but the back right wheel bearing is bad, it makes a lot of noise around 60, i need to replace it but im not 100% sure how. i brought it back to the dealership and they where gonna charge me $250 to fix it. i looked up the part online and its only $80, so i was gonna attempt to do it my self. any tips you could give me to help make this a bit easier on me?
@Desertcarcare
@Desertcarcare 7 лет назад
ClunkGam1ng ...totally understand. Not a challenging repair..if you can press bearing out with ease. (special tooling ). Call me at the garage & I can help walk you through or perhaps convince you to save a few knuckles & pay to have it successfully removed...either way here for ya !-Frank
@victorvargasjr4023
@victorvargasjr4023 2 года назад
Nice...I'd like to see a rear caliper replacement on a dodge dart gt
@bennettcarr8893
@bennettcarr8893 2 года назад
would this also cause a rotaional noise that gets louder with speed?
@Desertcarcare
@Desertcarcare 2 года назад
It can absolutely-
@fytgfr45
@fytgfr45 4 года назад
Could I please have a copy of the brake caliper recall concerns?
@Desertcarcare
@Desertcarcare 4 года назад
Joshua Jordan head up to video description above and you will see notes ~ hope it helps !
@ethanbrewer1520
@ethanbrewer1520 5 лет назад
Any help or advice?? Anyone?
@TheDickMan_
@TheDickMan_ 3 года назад
What kind of hair gel do you use?
@fordnut4914
@fordnut4914 4 года назад
My mechanic told me to go to modern round tires and get rid of the square tires I said I just bought these at a really good price at a side road flea market. Wtf.😳
@lacycallahan2365
@lacycallahan2365 5 лет назад
Gosh I wish I was closer. Just picked up same model dart and all recalls and things haven’t been fixed on it...mom of 3 and I don’t want to die in it lol. Is there any way you could advise a DIY if the dealership won’t help?
@Desertcarcare
@Desertcarcare 5 лет назад
Lacy Callahan ~ first off ~ your not in any major calamity~ otherwise if you like call me at the Garage & I could FaceTime the specifics ~ no worries
@lacycallahan2365
@lacycallahan2365 5 лет назад
That would be lovely. It’s making a horrible racket and has me skiddish.
@lacycallahan2365
@lacycallahan2365 5 лет назад
I’ve been waiting almost a month and a half for my local dealership to get in the right recall parts. Is there any way you could talk me through the repair process since I’m so far away? It’s the oil in the brake line recall...
@Desertcarcare
@Desertcarcare 5 лет назад
Lacy Callahan ~ ring me at the garage ~ do my best ~ Monday thanks
@brianapayan429
@brianapayan429 6 лет назад
Hi I have a 2016 Dart can you send me the tsb I plan on taking it to the dealer for repair
@Desertcarcare
@Desertcarcare 6 лет назад
Briana Payan ~good luck there !~scroll down lower in the comments here & you will find the TSB
@kirkarnold9023
@kirkarnold9023 5 лет назад
how about showing in detail how to change the pads. not a hard job. you may have already.???
@jake5210
@jake5210 5 лет назад
Blue Dart?
@MohammedHassan-nc1pu
@MohammedHassan-nc1pu 7 лет назад
that's exactly the problem I have
@Desertcarcare
@Desertcarcare 7 лет назад
...good luck ! Here if you need help.
@brandono.4945
@brandono.4945 5 лет назад
I am having this problem after replacing my rear caliper in my Honda Odyssey. It feels loose and rattles with normal driving. I don't get how that can happen with a new Raybestos Caliper. Would getting new pins fix the issue?
@Desertcarcare
@Desertcarcare 5 лет назад
Brandon O. - possibly new pins ~ double check mounting
@brandono.4945
@brandono.4945 5 лет назад
@@Desertcarcare I've double check mounting and even torqued to spec. It also seems like the bolts that go into the pins that hold the caliper to the bracket have some play. I will buy some new pins and compare them and see if that helps.
@brandono.4945
@brandono.4945 5 лет назад
Been working on cars for 15+ years and never had a problem like this on a new caliper. Maybe a piston issue, a bleeder issue or piston boot issue but never that. 😂 Gotta love aftermarket garbage.
@Desertcarcare
@Desertcarcare 5 лет назад
Brandon O. ~ good luck my friend ~ call me at the garage during the week anytime if need be. 🤜🏼🔧🔧
@Desertcarcare
@Desertcarcare 5 лет назад
Brandon O. ~ man ~ it happens ~ walk away ~ re approach it with a fresh set of eyes ~ aftermarket can be risky ~ stay strong rock the weekend
@oclaothug69
@oclaothug69 6 лет назад
I had this same problem I replace the caliper pins and bolt and it was fix , I got lucky
@Desertcarcare
@Desertcarcare 6 лет назад
Truth Seeker ~Nice!
@mauricioortega2595
@mauricioortega2595 6 лет назад
Hey, can you send me a copy of the TSB, please?
@Desertcarcare
@Desertcarcare 6 лет назад
Mauricio Ortega ...they had quite a few T.S.B.'s for that platform ~~this is related to what is covered here: 2013 DODGE DART Technical Service Bulletin NHTSA Item Number:10052113 Service Bulletin #:SB-05-004-13 Replacement #: Vehicle/Equipment Make:DODGE Vehicle/Eqipment Model:DART Model Year:2013 Mfg Component Code:030000 BRAKES (PWS) Date of Bulletin:2013-03-15 Date Added:2013-05-20 Summary:DODGE: WHEN BRAKES ARE NOT APPLIED, WOULD BE RATTLE NOISES FROM FRONT BRAKES WHEN DRIVING. MODELS 2013 DART Any questions ring me at the garage.Hope this helps !
@filipinojacktolentino6735
@filipinojacktolentino6735 6 лет назад
Can you send me TSB report
@filipinojacktolentino6735
@filipinojacktolentino6735 4 года назад
I have the same problem and the dealer said caliber bolts needs to be replaced and will cost $530
@RaduMichael
@RaduMichael 7 лет назад
I thought you had a solution for the present problem. Not replacing the calipers which is obvious.
@gerrycovarrubias8226
@gerrycovarrubias8226 4 года назад
You guys looking for oil lube techs ,tire changer?
@sinqros
@sinqros Год назад
Paid 500 for my break job, my Scion TC 2015 is doing the same thing, I’m sure it’s those pins.. it rattles over uneven surface at slower speeds, sounds metallic like something is broken,
@narioesprit4516
@narioesprit4516 2 года назад
The exact problem with my 2004 Mazda Axela
@MrPureSin
@MrPureSin 6 лет назад
Sooooo how did you fix the play in it? You replaced the whole caliper?
@Desertcarcare
@Desertcarcare 6 лет назад
MrPureSin ~yes.
@MrPureSin
@MrPureSin 6 лет назад
Desert Car Care if its just bad pin bolts couldn't I just replace the pins?
@Desertcarcare
@Desertcarcare 6 лет назад
MrPureSin ~~you could try that first~make sure no play there
@alessandrozavagno6463
@alessandrozavagno6463 5 лет назад
Is it not possible to replace only brake carrier?
@Splitskull112
@Splitskull112 6 лет назад
I actually called my dealership and asked about this issue and they tell me absolutely nothing. If you're able to give me the info needed to get this correct I'd appreciate it. Thanks
@Desertcarcare
@Desertcarcare 6 лет назад
Splitskull112 ~here you go as this should help ~NHTSA ID : 10136510 ; TSB 05-004-13 Rattle from front brakes when driving without brakes applied ~involves replacing front brake caliper brackets ,spring clips & if necessary front brake pads.
@baudedelini956
@baudedelini956 4 года назад
Cool ,so how much did you charge":))
@jessyboyer2861
@jessyboyer2861 6 лет назад
would it stop the noise only by changing the pins ?
@Desertcarcare
@Desertcarcare 6 лет назад
Jessy Boyer ~ that should be good to go
@jessyboyer2861
@jessyboyer2861 6 лет назад
thank you very much for the video and the answer !
@Desertcarcare
@Desertcarcare 6 лет назад
Jessy Boyer ~ always here ~thanks for stopping by
@jessyboyer2861
@jessyboyer2861 6 лет назад
Hey, just wanted to late you know that the new pins did not work. The problem seem to be in the bracket.
@Desertcarcare
@Desertcarcare 6 лет назад
Jessy Boyer ~worth the shot. Ultimately glad overall a no drama easy fix for ya ~if you can ~ join me over here www.wrenchnation.tv/ ~ rock on.
@ernierodrigues5789
@ernierodrigues5789 11 месяцев назад
i really like your video until the end when you didnt show how to fix the caliper loose pins
@Desertcarcare
@Desertcarcare 11 месяцев назад
Yes - could have done that more detailed for sure
@kingdrosive4102
@kingdrosive4102 5 лет назад
Can a very bad strut cause a brake disc to overheat
@Desertcarcare
@Desertcarcare 5 лет назад
Kingdrosive 3 ~ have never heard or seen that situation there ?
@kingdrosive4102
@kingdrosive4102 5 лет назад
Yea..it was a odd correlation..but I’m highly convinced I have a bad caliper due to how hot one of my brake discs get..you can drive it around the block and the brake disc is untouchable compared to the other rotors
@Desertcarcare
@Desertcarcare 5 лет назад
Kingdrosive 3 ~ let us know how it all works out ! Good luck there 🤜🏼
@--..--.-.
@--..--.-. 5 лет назад
This is the same problem I have with my Ambassador.
@kylemorton7815
@kylemorton7815 5 лет назад
Hey Frank, awesome video! If you could send me the SB-05-004-13 that would be great! Thanks again!
@ethanbrewer1520
@ethanbrewer1520 5 лет назад
Just put a brand new pads on my front tires I have a Volvo S60 2001 and it has a 175000 miles on it the brake pads were smoking on both sides I’m almost positive that the caliper is sticking
@Desertcarcare
@Desertcarcare 5 лет назад
ethan brewer ~ could be calipers | need to ensure hydraulically that when you depressed the pistons in the calipers ~ there wasn’t any debris back up in to the brake master ~ bleed the brakes really well with new fluid ~Additionally ensure caliper mount and operation is moving freely . Hope this helps ~ call me at the garage Monday am if needed
@P-Dubs
@P-Dubs 2 года назад
I couldn’t hear the caliper noise in the video because of all the wind noise.
@joseluagonzalez5507
@joseluagonzalez5507 6 лет назад
Whats the link?
@Desertcarcare
@Desertcarcare 6 лет назад
Jose Lua Gonzalez ~NHTSA 10052113 ~ TSB 05~004~13
@joseluagonzalez5507
@joseluagonzalez5507 6 лет назад
Desert Car Care what's the link for the upgraded guide pins
Далее
Brakes Still  Dragging? And Not a Frozen Caliper?
11:05
Просмотров 284 тыс.
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,4 млн
Good deed #standoff #meme
00:15
Просмотров 407 тыс.
The Only Brake Pad You Should Buy
10:07
Просмотров 815 тыс.
How to Stop Your Brakes from Squeaking
14:48
Просмотров 8 млн
Stop brake caliper rattle!
4:21
Просмотров 49 тыс.
4 signs a caliper needs replaced | 4 Tips
2:33
Просмотров 743 тыс.
Brake Caliper Slide Pin Grease
12:38
Просмотров 1,9 млн
#стант #на альфе
0:39
Просмотров 309 тыс.