Does Da Vinci’s 500 Year-Old Power Hammer Actually Work?

Подписаться 1,8 млн

Просмотров 830 тыс.

50% 1

Huge thank you to Levoit for sponsoring today's video! Check out Levoit, the #1 Air Purifier Brand on Amazon ➡️ amzn.to/3JGqnql
For offices and bedrooms ➡️amzn.to/3p60TJm
Around 500 years ago, Leonardo Da Vinci sketched a simple, compact trip hammer design using a spiraling cam. This could be a useful machine for the HTME shop. Find out what happens when we try to build the da Vinci cam-hammer to help with blacksmithing projects moving forward.
Help us make more videos ► / htme
Instagram ► / htmeverything
Discord ► / discord
Merch ► shop.spreadshirt.com/HTME
H2ME (Second Channel) ► bit.ly/2GTcrcG
▾ Our Camera Gear: ▾
► GH5s: amzn.to/3BzY9Id
► GH5: amzn.to/3Eu0juJ
► Lens: amzn.to/2XXkVvM
► GoPro Hero 5: amzn.to/3EFkxSr
► Dracast Light Panels: amzn.to/3vUY2W4
▼ Send Us Some Mail ▼
How to Make Everything
PO Box 14104
St. Paul, MN 55114-1802
▼ Special Thanks to our Patrons at $15+ per month ▼
Bryce Suchy, Potato, Richard Dyer, Kevin Scott Miller, James Daniels, Edward Unthank, Steven Stowe, Dave Jones, dangerimp ., Joseph Patton, Kat PH, Emerson Propst, Elias, Jonathan Krailler, Jason Resha, Nathan Losee, Kyle Lauritzen, Stray_Sparks , Craftsta64, Victoria Eads, Jeffrey Luck, sally kreidt, Arishaig , Ian Miller, Kevin Shuttic, Erik Språng, Daniel Sixta, Lee Schnee, Iain Bailey, alex latzko, Stephen DeCubellis, Fruitymasterz , Adrian Noland, Tiffany Bennett, Estoky Designs, David George, Emmanuel Fillers, Phil, Benjamin Maitland, Sandy & Jayremy Lester, Larry Ullman, Eilidh MacDonald, Stephen C Strausbaugh, Dylan Rich, Jason Kaczmarsky, Jason Lewis, Andrew Nichols, Susan M. George, and Daniel Laux
▼ Credits ▼
Created and Hosted by Andy George
Co-Hosted and Assistance by Lauren Lexvold
Camera and Cinematography by Daniel Garritsen
Music by Taylor Lewin: taylorlewin.com/htme

Опубликовано:

28 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 929

@richardparsons7012 Год назад

Looking at the chips from the auger, and the tear outs on the various edge tools, an episode focusing on sharpening tech would help you along a lot. The metallurgy and tech is really interesting, but a sharp tool is only as good as the edge worked in. Now you're into good quality materials, you can really benefit from the attention to edges. Thinking contextually, the tools were huge investments, and the folk using them knew how to get the best out of them.

@alexandernewman7587 Год назад

Watching that drawknife hack it's way up the log... Yeah.

@kassiog.6595 Год назад

Well, with the automation vibe, a grinding wheel is a must

@headstanding_Penguin Год назад

Same with the saw and the theets on that thing...

@cfv1984 Год назад

I'd seriously love to see your videos on historical tool sharpening. You seem to know a lot about it and I could use some learning on the topic

@richardparsons7012 Год назад

@@cfv1984 I've got a ton of old books, and some info on woodworking tools going back through archaeological records. Carpentry is my job, and interest. Tools have been under microscopes to establish the abrasives used, for example. And for the era relating to this video; there are documents and surviving examples. Sorry, no I don't have a ten minute video.

@Earthenfist Год назад

Hm... I think they've missed a little bit of the point of the system- DaVinci's drawing showed the cam acting on an arm at a right angle to the hammer, on the opposite side of the fulcrum- I think that was an important part of the design, since it meant that there was more mechanical advantage on the hammer and would require less rotational force. This would allow you to use a heavier hammer, possibly set it up with a longer swing, and hand-crank it without getting tired.

@boelwerkr Год назад

It makes the machine also more efficient, because the hammer can fall freely. How the construction is now the fall of the hammer is limited by the speed of the rotating element. It can be seen when it's moved very slowly. It's the same reason why in hammer mills the hammer is actuated at the end with and not from under neath. Also in very old machined stones where stacked on the hammer head to increase the weight without investing in expensive metal.

@jllaine Год назад

Also, the hammer shaft is dropping on top of the cam, limiting its free swing and wasting lots of energy striking the cam instead of the anvil. Operating the cam against the end of the hammer arm would drop the hammer more freely for better striking.

@thomasmarton2857 Год назад

When designers have to engineer 😅

@kafuu_chino Год назад

The lever length should be barely past the cam axel, which would allow for much a slower turning speed while having a quick drop. Slow and strong hits are ideal.

@oldvlognewtricks Год назад

@@kafuu_chino If you copy Leonardo’s design, it wouldn’t matter - the hammer would drop the same regardless of the rotation speed, since the peg holding it would fall all the way off the high point of the cam without obstruction.

@adamchurvis1 Год назад

It's not making a full impact because the hammer handle is being hit by the cam when it falls. Relieve another inch of material from the smallest part of the nautilus and continue that removal for another 120 degrees of rotation.

@nutwiss Год назад

Yep - the hammer's shaft is landing on the cam before the hammer head actually contacts the anvil.

@blahfasel2000 Год назад

No matter how you shave the cam the hammer handle will always ride the tip of the largest radius down through the rotation. It's never really free to fall. That's why the original DaVinci design in the drawing has the cam acting on the end of the handle opposite of the fulcrum instead of between the fulcrum and the head, so that the end can slip off the cam and swing freely.

@adamchurvis1 Год назад

@@blahfasel2000 Yes, excellent point, sir. I should have thought of that. The only way it would have missed contacting the handle is if the rotational speed was high enough to outrun the hammer-fall. Thanks for pointing this out, sir.

@renagenic Год назад

@@blahfasel2000 of course 1 it's free to fall, if it was shaped like a real cam, then I understand what you mean by it always being in contact riding the top radius, but, because it ISN'T shaped like a cam, it falls at 9.8M/S^2, it already had just enough room to fit the anvil, if it was hitting the wood, it would not be making the metal on metal sound. yes, the stake could be driven deeper, but when he put the metal to be hammered, in, even when the metal mostly cooled, it didn't drive the stake any further into the log, so I guess the first few times when it was coming off randomly, would have been when it must have hammered to the depth it could handle, from that fall, of that hammer. I think they must have changed the shape, slightly, so they could raise its axis, unless they moved out further down the fulcrum too

@lassikinnunen Год назад

@@blahfasel2000 its free to fall up to the cam or the nail provided its rotating faster than freefal acceleration would keep it riding on the cam, it wouldn't be able to ride on the cam anyway through the whole rotation as the hammer hit surface would not let the hammer get so down. The cam axis should be lower too and longer handle for the hammer. The cam itself could be different shape tho too, just 45 sector from the middle being full height and everything else 0 height of it would suffice provided the power source has enough torque

@Jay-qs1ef Год назад

The handle of the hammer is hitting the wheel, which prevents the hammer from completing the swinging motion all the way. Shave down the part of the wheel directly after the drop off so that the hammer rests completely on the anvil (until the wheel turns and then lifts it up again). A better way of doing this would have been to put the wheel on the back of the hammer, extend the handle of the hammer, and flip the wheel around so that it pushes down on the handle of the hammer instead of lifting it (this would cause less stress to the structures and take less energy to operate).

@jarekmace1536 Год назад

Principles of leverage. Placing the cam at the rear end of the handle would take more energy to lift the hammer head. 1 lb. at the end of a 3 ft. shaft has to be countered by a 3 lb. load at the end of a 1 lb. shaft for an equity of 3 lb.-ft. of load. However, it would allow for a longer swinging arc of the hammer, creating a stronger blow. It just means that you'd need 2 people to do the work, one on the anvil and one on the crank, without some creative and excessive gearing to transfer power from the anvil area.

@sadistksuffring1537 Год назад

definitely wouldn't work that way unless you make the handle stick out farther than the hammer does. ever try holding a door open near the hinges?

@latemanparodius5133 Год назад

What would be better is using the cam to push against a peg sticking out from the sides of the handle. Nothing to get in the way of it dropping. Ride up, then drop.

@Jay-qs1ef Год назад

@@sadistksuffring1537 that's why I put extend the handle out, gotta be a long handle

@Jay-qs1ef Год назад

@@latemanparodius5133 I was thinking that too great idea :D

@zinovyrozhestvensky652 Год назад

I love how when he said “alternative power source” the water wheel was in the background, nice editing effect

@joshjones6072 7 месяцев назад

Leonardo was always ahead of his available materials and energy by 400 years. But he had a vision of what was possible! He paved the way for so many things! All of what he could conceive came to pass. Amazing man.

@Thechaos0001 Год назад

great video, why is it unlisted?

@karyjas1 Год назад

A good upgrade would be to add a spring, maybe something like a crossbow to add tension. Also use graphite to lube the whole surface of the cam and the joints

@patriciofreire3375 Год назад

These are my thoughts exactly. And this is why it’s good to read the comments before adding my own.

@kendallguier1378 Год назад

I agree though if you want to be accurate they would have probably used to lead for the cam rip your kids

@ReaperCodes1911 Год назад

@@patriciofreire3375 i just found yours. i was thinking the exact same

@blahfasel2000 Год назад

A better "upgrade" would be to move the cam to where daVinci actually had it, on the tail end of the handle on the opposite side of the fulcrum. When the cam is between the fulcrum and the head the handle will always ride the cam down through the rotation, because the "step" in the cam cannot turn from vertical (where the hammer head reaches its highest point) to horizontal (where the protruding part of the cam is out of the way of the handle) instantly. No amount of springs, heavier head etc. can change that fundamental flaw.

@oldvlognewtricks Год назад

Why add something complex like tension to something simple an effective like a gravity hammer? Just add more weight/mechanical advantage, rather than having to manufacture spring steel or something else under tension that would degrade. Nobody wants gut or other bowstrings in a forge environment… unless you want to be replacing them all the time.

@BearCavazos Год назад

Hey HTME! Y'all are awesome! Thank you for this awesome video! I'm a bladesmith myself, and I dabble in woodworking. If y'all put wedges in the pegs, it will be a much tighter fit. The cams look very sturdy. I am lazy and hate maintenance, so I try to make things as me proof (idiot proof) as possible. You guys killed it just a thought for future projects.

@maxk4324 Год назад

Mechanical engineer here. 7:05 is almost exactly how we were taught to design cams in university. There are of course software packages you could use for this, but they started by teaching us all the manual drafting techniques before moving on to CAD. As ol fashioned as it sounds I think I learned quite a lot about good design practice from that part of course. Really made you have to internalize the geometry of things to be able to draft it accurately by hand.

@DGHamblin Год назад

Designing the cam... Would it also work to tie a string to a pencil, and then wrap the string around a disk? As you rotate the pencil back around the disk, the string would unwind increasing the radius as you draw. The "drop" of the cam would be the same as the circumference of the disk. The length of string would determine the overall size of the cam. But I'm just an old country boy, what do I know?

@fujin657 9 месяцев назад

i love this series so much because as a blacksmith who's not interested in making weapons as much it's so annoying when people think that's all blacksmiths are and this shows a different (what i think is the more interesting side ) of blacksmithing.

@RealAndySkibba Год назад

Could put some boards on either side of the sledge to keep it from moving side to side. Lash them outside the perimeter of the cam.

@Guru_1092 Год назад

Lauren's nails looking absolutely fabulous in this video. 💯💅

@laurenapolis Год назад

Hell yeah thank you lol

@sammacias8390 Год назад

could put a chamfer on the bearing surfaces of the cam to allow the hammer to track better

@EntrappedSoul Год назад

you could always try a foot pedal system like they used for grinding wheels when they sharpen axes and such...and possibly a leaf spring to help bounce the hammer back up to keep momentum up and catch at almost the peak of the cam so it can then be set and to have a control on the speed of the hammer

@scasny Год назад

i seen such a thing, large hammer on long springy branch that you bring down by rope attached to a plank you stepped on, it work quite well, you have free hand and its more powerful then one handed hammer. Also you can use smaller weight and made up power with swing speed, or be slower by using heavy weight exploiting momentum. Its sort of similar to medieval lathe.

@Jordan-hu8fg Год назад

cant wait for the next video looks like finally going to get a water wheel

@Animallovingpermie Год назад

I'd like to see a video comparing your different tools and how much of a step up in efficiency each was compared to previous. like how much faster a bronze hatchet cut versus the stone one.

@elijahhutchinson3031 Год назад

I built a similar hammer for my home blacksmith shop based on your design. I used innertube rubber to pull the hammer up to it's max swing height (instead of a cam) and a treadle to pull the hammer to the anvil with every step. It works pretty well but I ran into the same trouble as Andy. The hammer is limited by it's weight as well as it's ability to be dropped to the anvil in a controlled way. I do think that a treadle attached to the hammer handle with a cord allows it to be pulled with greater force than gravity alone. The davinci design was conceptualized, presumably with a massive hammer, for industrial use. Anyway, thanks for the inspiration! It's pretty cool and I wouldn't have such a fun tool if I hadn't watched your videos.

@DragGon7601 Год назад

Couldnt you increase the power by giving it a longer handle/move the anvil father from the crank?

@danacoleman4007 Год назад

I just can't believe you did all of that stuff in under 13 minutes 😁

@Akren905 Год назад

Welcome to age-ed hipsters make in less then 20 minutes lol

@jannepeltonen2036 Год назад

This looks really interesting and fun. Also am a bit horrified about this thing being connected to a relentless power source such as a waterwheel. I'd like to first make it quite a bit more sturdy and fault tolerant. Maybe add sliders on both sides of the hammer handle so it really cannot fall off the cam?

@prichard6836 Год назад

I have to say, you’ve all gotten much better at using the tools you’ve fabricated. Especially your forging skills. You’ve gotten to the point where you add a flair to your projects just because you can

@thisolesignguy2733 Год назад

I think your next project should be a wood hewing bench. I can tell you guys are in dire need of one if you keep doing projects like these. Also, check Mr. Chickadee. He builds everything (buildings, tools, etc.) all with vintage hand tools and techniques. He would really help you guys get an idea on how to do these types of projects without struggling too much.

@onebrickatatime9097 Год назад

I would love to see you make more of these automated machines. Nice.

@CharlieBrownsApocalypse Год назад

Nice. I’m about to enjoy the hell out of this

@raymondraptorclaw2901 Год назад

As a dude who built his own power hammer, the best idea I got for it is a pulley mechanism. That way, you can pull the hammer up as high as you want and let it come down.

@Evpat2000 Год назад

Brilliant! It's amazing how many things that Da Vinci came up with that are in use today.

@asdfjoe123 Год назад

Another thing that might improve this is making the cam smaller so that when the hammer drops it hits the anvil before it hits the cam. A lot of the 'oomph' is being lost to contact with the cam.

@paulmiller6545 Год назад

I love it allready, but don’t hit a metal ax with a metal hammer, use a large wooden mallet! You could break the ax otherwise.

@olbluetundra881 Год назад

You know in the title it shows da Vince's hammer wheel. As someone who has built hi machine using a 12 oz ballpeen hammer. I made 1 mod to it. I ended up making the cam for the movement of the hammer adjustable up and down by screws so I could add shims basically. It actually worked pretty good. The problem I found was the release point to allow the hammer to fall and strike the workpoint. So I made another mod later. I used a twisted rope with a screw adjustable tension so I could increase strike force. Amazing what he had done so long ago. Fun designs to play with also. I've even built a cutie chunker entirely out of an old oak tree I cut down to test designs and to see how I could improve upon it.

@nathantron Год назад

Glad to see the shop coming together. Shop tour time!!!

@jonathanhadden8199 Год назад

You definitely need to adjust the shape of the cam since most of the time, it was barely even hitting anvil. The hammer is being caught by the cam, especially when you try and spin it quickly.

@cosmicbrambleclawv2 Год назад

Love the video :D as a smith myself this is going to be a huge help because traditional power hammers are priiiicey and I don't have a dedicated shop for one anyway One adjustment I would suggest is to add a treadle so you can use both hands on the project rather than one on the crank Roy Underhill from the Woodright Shop on PBS made a foot powered treadle lathe once I believe (he's actually fairly local :D town or two over) but with your water wheel I'm sure you could even do that fairly easily with a belt and wheel system (akin to a car's timing belt) but a foot treadle would probably allow more precise work and modern power hammers use a foot bar to regulate the speed

@Tvngsten Год назад

A treadle with a flywheel would actually be awesome for this kind of hammer.

@matthewmarting3623 Год назад

It warms my heart to see how far you’ve come in creating things. I noticed you properly hafted the sledgehammer by hitting the handle at the end and forged a quite respectable crank (including some decorative twists). In a few more years you’ll be an expert at so many things

@stevenking3286 Год назад

So much work required in the "old" days, all muscle no fat, most of us are soft and would be sore as heck the day after. Thankfully DeWalt and Milwaukee helped us out. Enjoyed the video and your commitment of doing everything the Pioneer way.

@KingJupiter Год назад

She always seems so genuinly happy which makes me genuinly happy on top of being well entertained by the things you guys construct

@laurenapolis Год назад

Ah this is really sweet! Thank you 😊

@gustavholm6193 Год назад

Just an idea: Why not exchange that hand crank for a pedal system? Then you got your hands free for moving around the metal that you might be smithing on the anvil and you drive down the amount of operators from 2 to 1. Love the video btw ^-^

@Herr_Scheissemann Год назад

Andy, add more length to the hammer arm so you'd have more height for the hammer to swing at full force. Cool project BTW..

@mtbrocket Год назад

So much work for such short videos. I really appreciate the effort you and your team put into these videos. How far you have come in experience and learning. Bravo. 🎉😊

@velazquezarmouries Год назад

A treadle hammer would have been better because our legs have more power and it can be worked with a pole or a bow like a lathe

@niznwnw6091 Год назад

Rotate the wheel 90 degrees and power it from the back You will be able to use a smaller wheel The drawback is it will need mor force to rotate as the torc you will need to aply will be higher Edit: oh and you will have to make a new base for the whole thing the can support the wheel and the anvil, as the weel will be pepindicular to the support beams and you will have to build the base around it

@dullahanblack3090 Год назад

I keep seeing on tv a foot pedal grinding wheel that seems to work like your lathe, maybe that could be a project

@brt5273 Год назад

It's a fine first attempt to get an understanding of what works and what needs redesigning. Lots of room for improvement but a very inspiring project. I can imagine setting up a treadle with a flywheel to drive the cam disc, which could also provide a more stable and smoother turning axle.

@isaacgraff8288 Год назад

Trip hammers are interesting chunks of history.

@humanistwriting5477 Год назад

Check out slitting mills if you think trip hammers are neat.

@ishnifusmeadle Год назад

If u enlarge the cam, also keep in mind the cam start point. It appears like the hammer is hitting the cam som when it drops so maybe adjusting the shap a small amount to ensure it doesn't happen. Maybe some oil or beeswax on the hammer shaft/cam/axles to reduce friction n increase efficiency too.

@papaown Год назад

There's something really fresh about the videos and I can't put a finger on it. The camera work is great and you finally changed that same song you'd use every single video lol. I like it

@nickg5250 Год назад

one of the best channels out there, and glad you were able to make it past the shop fire. cheers for 2023!

@mikelauramcguire Год назад

You could also add a spring that would pull the hammer down with more force than gravity alone.

@Kurokubi 11 месяцев назад

Coil springs didn't exist during the Renaissance, granted I don't know if this channel tries to keep things accurate to the time period

@paulklee5790 Год назад

Fascinating stuff... just to say given Leonardo’s mathematical turn of mind I’m sure he would have given a lot of thought and care to the exact curves of the cam geometry. Laying out a pretty good approximation of a spiral is easily done with a compass or trammel (after all the Greeks were using volutes on capitals two millennia earlier) and the smooth running of the machine is down to how the rotational energy is transformation to the hammer. When it comes to the mechanics of gears and leavers, the devil is in the details....

@freedomjams8201 11 месяцев назад

I Needed this command 😅

@memoegz0187 Год назад

That was awesome I'm glad your back and uploading !!!!! Hope everything Is going good for you guys bless you and your team

@TheRokkis Год назад

Whoever edits these is doing a great job. It's the small things like sped up hammering working out with music. I tip my fedora to thee!

@skeleton_craftGaming Год назад

I bet especially with that axe. that was a battle axe. (you can tell because it has a large portion cut out of it making it lighter where as tree axes have more metal added to them to make them heavier.)

@DimiDzi Год назад

you can always just use a kick hammer like the drum's but for blacksmithing

@jhoughjr1 Год назад

we had a kick hammer in my high school shop to make sawdust pucks.

@Stahlengel13 Год назад

I like the waterwheel just chilling in the background...

@JessWLStuart Год назад

I love Lauren's enthusiasm!

@ke9tv Год назад

I was wondering when you were going to build a trip hammer. You've been working iron for a while. In China, fineries equipped with fining hearth, chafery and trip hammer date back to the 3rd century BCE. With a well equipped finery, you can make bog iron into fine Damascus steel!

@josephm6734 Год назад

Why is this unlisted?

@68able2 Год назад

mayeb they are checking how many people click by notification on upload

@kasnitch Год назад

it showed up in notifications but not in my feed when I refreshed ...

@Fisheiyy Год назад

maybe for patreon early watch but instead of unlisting they published at first and then fixed

@WasatchWind Год назад

That bizarre moment where I casually post your video in a discord and some idiot freaks out about your ad read saying air purifiers are inherently dangerous or some nonsense. Great video regardless, glad to see bigger projects like this again!

@jamesmccallum3781 Год назад

You don't get it! Air purifiers ARE dangerous! Once it finishes purifying dust and contaminants out of the air, it will start purifying out the oxygen, and you won't be able to breathe!

@mattkhosh Год назад

Love this channel and the content! Thanks HTME team!

@grimtin10 Год назад

why is this unlisted

@therealeikichionizuka Год назад

bros been playing minecraft im real life for years and i just now noticed. i remember when you was on the stone age

@coleeolee Год назад

You should def look into creating a proto gearbox to attach to a weight and the hammer. Idk if that technology was created yet, but it would be a simple solution to a lot of your problems with sawing, hammering, etc.

@elijahsanders3547 Год назад

Pretty cool video. Would love to see it further developed. Thank God for machinery!

@colelewis2482 Год назад

I loved rex's appearance. I saw the words come up for one frame and had to figure it out.

@BombingCarpets 8 месяцев назад

Doing all that work with immaculate nails. Love it!!!

@Madman2429 Год назад

The falling off the cam problem would have also been solved by sanding or filing a groove into the cams face. Gluing a second cam in place did a similar trick, as the space between the two formed a guiding groove. A lot of their joints in the frame could use a second dowel/nail could improve performance by redeffort lost to the frame twisting.

@KeithOlson Год назад

FWIW, instead of making the hammer head heavier, you could add a weight connected between the cam and the head. The weight could be on the end of a beam that pivots below the hammer's pivot, so both rise in sync via a rod that connects the two beams.

@SkellyBobRoss Год назад

Every time I watch this I realize how important it is to be working with groups of people and for people to specialize in what they do.

@iamnotgood5710 Год назад

You may have already made this connection because I’m a little behind on your vids but it just struck me that the fire that got your old workshop sort of simulates a natural disaster that sets back a civilization.

@comfortablegrey Год назад

This is some of my favorite content. I bet Archimedes, Leonardo Da Vinci, and all manner of Indian or Chinese inventors could inspire new videos for the channel now that you're in the iron and steel era!

@johnnyrebel5458 Год назад

That's was fun to watch, THANKS.

@jameslocke3069 Год назад

This is a popular first hammer among hobby blacksmiths. Add a couple of trampoline springs to the hammer handle for the extra bang. Also considered sheathing the outside of the cam with sheet metal for a smoother operation and to keep the two pieces of wood from wearing each other out.

@Solais1019 Год назад

If you can find a way to put a concave wheel on the lower edge of the hammer handle so that it rolls on the cam, it would likely help with the friction that's working against the spinning because you've got the entire cam rubbing against the hammer. The wider cam does help keep the hammer from falling off, but you could probably also have put guide posts on either side of the assembly as well

@jonathanballoch Год назад

I'VE ALWAYS WANTED TO BUILD THIS!!! so cool

@chrisfox961 Год назад

It is good to know that hanging out with Andy is a great way to get hammered!

@CrazyMagicHomelesGuy Год назад

Id reccomend you add a spring that would pull the hammer down. It would add force

@aidenburgess217 Год назад

The Scientific terminology "its gonna, BAP BAP BAP," is gold. Great video!

@rodrigoff7456 Год назад

Your couple's partnership is inspiring!

@greevar Год назад

You could modify the hammer so that you can attach barbell weights to the shaft. That way, the force can be adjusted as needed. Also, a treadle would probably be advisable to allow the user to control the speed of the cam. I haven't read other comments, so someone may have already said this.

@genelomas332 Год назад

As a proof of concept, you've done well.. to take it to the next level and make it actually functional, there's a few modifications you'll need to make. For an external power source you just need to harness a water wheel or windmill, something to provide power to turn a drive belt. Then through various sized belts and pulleys you can increase the speed and torque to lift the hammer higher and faster. Clean, accurate holes with dense timber bushings (soaked in oil or wax) will give a smooth operation and reduce friction. To manage the speed of the hammer you need a spring-loaded foot pedal which will adjust the tension of the final belt, allowing the belt to slip when the pedal is released, and tightening it when it's depressed. To control the accuracy of the hammer through its range of travel, you'll need to snug up all the pivot and rotation points, (your current tolerances are too wide, allowing a lot of 'slop' in the system, and this is wasted energy). You'll also need a couple of guide rails either side of the hammer handle, just forward of the cam lifter. These rails will need to be made from a very stiff and hard wood (and also need to be replaceable) as they'll wear over time. Ditto the hammer handle and the cam itself. Once you have these additions, the final thing is to brace it and add a lot of mass to the base so it is solid and doesn't dance around your workshop when in use...

@1steelwheel1999 Год назад

very interesting to watch. I would love to try it.

@Wastelandman7000 Год назад

For riving pieces off the logs you really need a froe. It looks like a Japanese sickle reversed. Its designed for being whacked with heavy mallets. (its also how they used to make shingles)

@xboxcrusher Год назад

For the hammer sliding off the cam, just insert some guide rails alongside the cam to ensure the hammer stays in place. The guides would also help ensure the hammer is hitting right where you want it too. Further, by using rails you wouldn't have to widen the cam, thus lowering its weight and making it easier to turn. That would also help keep your handle from bending so easily due to the torque of turning a cam that big. Also, you need to put a stop bar level with the cam or at least add some leather padding on the hammer handle. Or simply make it so there is space between the handle and cam at the point the hammer comes down. Otherwise the repetition of the hammer handle striking the cam will make the whole mechanism more and more wobbly as time goes by. Eventually even cracking the wood.

@SparJar Год назад

Switching to the more modern axe head while hewing the log instead of while felling the tree is just golden content. Lol

@handyhippie6548 Год назад

a metal plate under the step of the anvil will help. you are slowly driving the anvil into it's stand, lowering the height of the striking face. because of that, the handle is hitting the start of the cam as the striking face is lowered, reducing the force of the blow. i made one of these all out of steel, and they do work quite well. mine is powered by an electric motor i got from a dryer rather than a crank, but the concept is the same. you could use a split of springy ash to help drive the hammer handle as it falls to get more force from the same hammer weight. i use a couple of trampoline springs on the hammer arm in my design. i created a smooth cam spiral by tying a string to a sharpie and winding it around a tuna can clamped in the center of the cam plate. as the string goes around the can, it gets shorter creating a smooth spiral with no measuring.

@rrrosecarbinela Год назад

You guys are awesome. HNY to the whole team

@sweetkity Год назад

Wanting to pet the Floof is strong. Floof must always be loved. Love The Floof!

@DobleWhiteAndStabley Год назад

Ah man. I remember making these as a kid. Bringing back so many memories. Use a 'pulling' spring attached about 4 or more inches under the hammer head, and on the frame in between the anvil and the cam. It will add pull into the hammer increasing strike force.

@RealAndySkibba Год назад

Wow. This is super cool

@madammazon2942 Год назад

This looks wonderful! One you have an automatic method that should really help your project progress! Also Lauren, those nails look so pretty this episode😍

@sharkins8696 Год назад

Jack of all trades master of none, because all of these are really hard to master. keep at it and write us all a book XD " Normal guys guide to everything " This channel just pours out creativity and proof a normal guy can do anything if you just practice and look things up!

@benjamintudor821 Год назад

I just want to Complement them for how hard they work on each and every project and they are really great about their work and they don’t give up

@A_Gray Год назад

Love the work and love the direction its heading! Little blacksmith thought for yall. Sadly I cant say im surprised with its performance. Cam hammers of this size tend to be more like a powered treddle hammer. Less physical work but more time. Something closer to DaVinci cam hammer that have been used in the past would be a tilt hammer. Powered by water they would swing a hammer weighing upwards of a 1/4 ton! While im not sure if water will pack quite a punch on this scale, but i am thoroughly interested to see the end result.

@PhngluiMglwnafh Год назад

Damn dude, your blacksmithing skills have gotten really good

@g4all205 Год назад

Great video. It was very interesting and fun. Some suggestions though as far as potentially improving this device. -bigger heavier hammer -larger wheel for it to go up higher -playing with gear ratios so the wheel spins faster -add some sort of spring, bow or other tensioning method so the hammer wants to go down beside from gravity

@ThomasEricWendt Год назад

thanks for the vid. funny teaser at the end

@revolcane 8 месяцев назад

I have seen a few RU-vid vids of working Da Vinci Cam power hammers and what one guy did to increase the weight of the hammer is to add a spring near the head of the hammer.

@CharChar2121 Год назад

I enjoy when both of you are in the video. I think she has something that you're missing and it's just lovely to see you together.

@najroe Год назад

for strongest anvil stump you want knots near top to divert any cracks, and a Froe and maliet is a MUCH better tool combination for the initial squaring then that very light axe.

@interestingideas7982 Год назад

To stop the hammer falling off without having to make everything twice as thick and heavy, just rotate the cam 90 degrees around the vertical so that its axle points toward the work piece.