Does Temu Have Any High Quality Woodworking Tools?

Подписаться 24 тыс.

Просмотров 42 тыс.

50% 1

If you're in the market for high-end woodworking tools, you might be wondering if Temu has what you need. Watch this video to find out!
Thank you to Ekster for sponsoring this video:
Please visit the following link and use the coupon code: FLYNNDOGG to recieve 35% off of your purchase!
partner.ekster.com/FlynndoggW...
CODE: FLYNNDOGG
Please check out the new website for links to shirts, tool recommendations and much more!
WWW.FLYNNDOGGWOODWORK.COM
To check out any of the tools featured in this video, please visit the affiliate links below:
- "Romantic Walks" T-Shirt - www.flynndoggwoodwork.com/shop
- Juice Groove Jig -
Temu Link - temu.to/m/uwuzo90gvrr
Amazon Link - amzn.to/3VOdHWd
- Matchfit Clamps - amzn.to/3U3qUt0
- Dewalt Router - amzn.to/3U5EYCd
- Groove Router Bit - amzn.to/43LOYUq
- Festool Dust Collector - amzn.to/3J48bHE
- 2 in 1 Woodworking Scribe Set -
Temu Link - Not Available
Amazon Link (similar) - amzn.to/3U5BeAP
- Paolini Pocket Rule - amzn.to/49vKKlc
- Swanson Combination Ruler - amzn.to/3U5Ag7x
- NicPro Pencil - amzn.to/4cJEgSG
- Table Saw Gauge -
Temu Link - Not Available
Amazon Link (what I would get) - amzn.to/49GEKGB
- Saw Stop 3HP PCS Table Saw - amzn.to/4almeV3
- Aluminum Alloy Woodworking Square -
Temu Link (similar) - temu.to/m/uq5prm3gnq7
Amazon Link - amzn.to/3vDbySN
- MFT Clamps -
Temu Link - Not Available
Amazon Link (similar) - amzn.to/3VOWQTs
- Microjig Clamps - amzn.to/3xqvqsM
- Festool Clamps - amzn.to/4akbGWg
- Round Rubber Mallet
Temu Link - Not Available
Amazon Link (actually rubber) - amzn.to/4b1rBcf
- Carbid Lathe Tips -
Temu Link - Not Available
Amazon Link - amzn.to/49r0ndL
- Vevor Lathe Tools - amzn.to/3J7W8ZN
- Juice Groove Clamps -
Temu Link - Not Available
Amazon Link - amzn.to/3xhHht1
General Temu Link -
Temu claims they will give a $100 bonus if you order through this link:
temu.to/m/u51m04agur1
Video Chapters:
00:00 - Introduction
01:59 - Packages
02:44 - Juice Groove Jig
05:25 - Ekster Wallets
07:09 - 2 in 1 Woodworking Scribe Set
10:09 - Table Saw Gauge
12:48 - Aluminum Alloy Woodworking Square
15:04 - MFT Clamps
16:33 - "Rubber" Mallet
18:02 - Carbid Lathe Tips
20:12 - Juice Groove Jig Clamps
21:33 - Closing
My favorite tools you might see in my shop:
Major Tools:
Jet Bandsaw - amzn.to/3IhIvHP
Nova Voyager Drill Press - amzn.to/446gHhH
SawStop 3HP - amzn.to/3XeN9dL
DeWalt Table Saw - amzn.to/3YuRWsU
Festool Kapex - amzn.to/3JNvYNG
Dewalt Compound Miter Saw - amzn.to/3JLyxj3
Jet 8'' Jointer - amzn.to/3I1NGvf
DeWalt Thickness Planer - amzn.to/3X91dWg
Shelix Cutterhead for DeWalt Planer
DeWalt Router - amzn.to/3Ypl84o
Bosch 2.25HP Router (In Router Table) - amzn.to/40TeIfD
Kreg Router Table - amzn.to/3ljpbkg
Kreg Router Lift - amzn.to/3liJMFK
Festool Cordless Track Saw - amzn.to/3DKiFtk
Festool Router - amzn.to/40LHL4B
Festool Carvex - amzn.to/43h1zyv
Shaper Origin - amzn.to/41fO3cq
Shaper Workstation - amzn.to/418VqlS
Measuring/Marking
Woodpeckers 642 Square - amzn.to/3wY94vl
FatBoy Pencil - amzn.to/3IxstIK
Woodpeckers TS 32 T-Square - amzn.to/3Gvmx2H
Paolini Pocket Rule - amzn.to/4194fw6
1-2-3 Block - amzn.to/3A2CRUY
Finishing/Sanding
Festool 5'' Sander - amzn.to/3RC4a0o
Festool 6'' Sander - amzn.to/3jD7coG
Rigid Oscillating Belt/Spindle Sander - amzn.to/3MCGjNw
Jet 1632 Drum Sander - amzn.to/40RXejN
Joinery
Self Centering Dowling Jig - amzn.to/3Xaapd7
Kreg Pocket Hole Jig - amzn.to/40Ksf9E
Festool Domino Joiner - amzn.to/3YaqG32
Drills/Drivers/Nailers:
Festool Impact Driver and Drill Kit - amzn.to/3RBgga6
Ryobi Brad Nailer - amzn.to/3jyBCsf
Festool Compact Drill - amzn.to/3ZONw0d
Thanks for watching! :)
#flynndoggwoodwork
#woodworking
#amazingtools
#woodworkingfun
#woodworkinghacks
#woodworkingtips
#beginningwoodworking
#toolreview
#diy
#easywoodworking
#woodworkinghacks
#woodshop
#woodworkinggadgets
#gadgets
#reaction
#cheaptools
#affordabletools
#chinatools
#newtools
#toolreaction
#temuhaul
#temuhaul2024
#temuwoodworking
#temufinds
#festool
#juicegroovejig
#clamps
#tablesawgauge
#tablesawsetup
#woodpeckerstools
#woodpeckers
#paolinipocketrule
#pocketrule
#microjig
#matchfit
#lathetools
#carbidelathetools
#carbidtips
#carbide

Опубликовано:

17 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 162

@tatehogan5685 Месяц назад

Quick note on the table saw gauge, when checking blade alignment to the miter slot you are only validating blade trueness when leaving the gauge stationary and rotating the blade. To check the blade to slot, start at the front of blade then slide the gauge to back of blade. Reference the same tooth in the blade for best accuracy. I have been enjoying your channel. Keep up the good work!

@FlynndoggWoodwork Месяц назад

Thanks for sharing that Tate, really appreciate it! Thank you so much fro watching and your kind words!

@a9ball1 Месяц назад

I understand that most viewers like Bert but I would prefer he went to the wood shed and stayed.

@FlynndoggWoodwork Месяц назад

I hear you. Thanks for watching a9ball!

@DuanePolega Месяц назад

I agree. Kind of lowers the quality of the video.

@patrickflynn-fk8mu Месяц назад

Thanks for the feedback!

@jhenderson4078 Месяц назад

Agreed.

@terencefranks1688 Месяц назад

his commentary is too drawn out & boring !

@georgelavelle2097 Месяц назад

The mallet is actually good. You're mistaken for what it is used for. It's hard and smaller in size because it's used in combination with chisels. Now you know!😅

@FlynndoggWoodwork Месяц назад

Hey! Thanks for pointing that out! Now I know! :). I guess I was mistaken on what i thought I was ordering. Happens a lot on that website! Thanks for sharing and watching George!

@maciej9280 Месяц назад

yeah its best used with carving chisels

@scottdeeslcutusa8117 Месяц назад

Thanks for the reviews

@FlynndoggWoodwork 29 дней назад

Thank you for watching Scott!

@FlynndoggWoodwork Месяц назад

Haha! I agree and great idea. I’ve had a lot of fun making those shirts!

@jimrosson6702 Месяц назад

lol another great video Bryan just can’t get myself to order anything from there love Burt’s scoring system. But I will say I have ordered 2or 3 things now from going makes off Amazon and love the quality of the product so far and got a few more items I will order as soon as I save up the money. Thanks for sharing Bryan. Hope you have a great weekend.

@FlynndoggWoodwork Месяц назад

Haha! Thanks as always for watching Jim! I'm actually doing another goingmake video sometime soon. I just got a bunch more of their tools to check out so stay tuned! :)

@TheTonysean Месяц назад

The mallet is used for leatherworking. Great video as usual. 👍🏼👍🏼👍🏼

@FlynndoggWoodwork Месяц назад

Yep, I agree. That and possibly chisels? Either way, it is classified under their woodworking tools for some reason. :(

@robertkerby2581 23 дня назад

Great idea on the Temu Purchases! Well done!

@FlynndoggWoodwork 23 дня назад

Thanks so much Robert! I appreciate you watching! :)

@robertchambers4466 Месяц назад

Haven't got anything from there yet got a friend who has over a month ago and hasn't gotten his stuff, so I'll wait and see how long it will take. The Going Make tools I got are great. Thanks for showing us these tools and another great video

@FlynndoggWoodwork Месяц назад

Yeah, it really is a crap shoot with getting your tools from these sites. I prefer amazon, you can still find some similar priced items on amazon as well! Glad you like the Goingmake tools. I’m a big fan. I’m actually getting ready to do a video on some of their other tools here in the next couple of weeks so stay tuned. Thanks so much for watching Robert!

@a9ball1 Месяц назад

I wanted to give you a big shout out for answering comments. I subscribe to a ton of channels and it just feels right when the channel owners say something in the comments. I feel like they are actually reading them instead of just saying that they do. ⭐

@FlynndoggWoodwork Месяц назад

Haha! I appreciate that a9ball. I read every single one! :). I think it's important, and I learn a lot from reading them. Lots of good suggestions out there!

@LordHog Месяц назад

Thanks for sharing. I have wanted to get a table saw set up gauge and that looks to be a good enough one for my few times a year that I use my table saw. Tell Burt we said hi.

@FlynndoggWoodwork Месяц назад

Haha! Burt says hello LordHog! Thanks as always for watching!

@kwiebje24 Месяц назад

You’re t-shirt is great 😂

@FlynndoggWoodwork Месяц назад

Haha! Thanks so much! :). If you are interested I sell them on my website! www.flynndoggwoodwork.com

@toonybrain Месяц назад

“Luckily I remembered what this tool was….” 😆 Love that sweatshirt. I would have to modify it to read “hardWOOD store”: nothing serves as catnip to me more than a warehouse filled with domestic and exotic, rough-cut lumber and live edge slabs. 🧡

@FlynndoggWoodwork Месяц назад

Haha! Great idea toonybrain! really appreciate it and thanks for watching! Great idea!

@Jack_all Месяц назад

I've bought a lot or woodworking tools from temu lately and they have all showed up well packaged and within 10 days, and im in Utah. I don't really like buying chinese knockoffs, but there's no way i'm paying $150 for a woodpeckers compass i can get for $7... the chisel honing guide is my favorite Temu purchase of the year.. i love it.

@FlynndoggWoodwork Месяц назад

I hear you Jack, There are definitely some things that are well worth taking a look at on temu. Haha! I'm glad you like the shirts, I'm having fun making them. You can see all of my inappropriate shirts: www.flynndoggwoodwork.com/shop THanks so much for watching, really appreciate it!

@hamilde Месяц назад

Don't forget, you can use that dial indicator to measure how parallel you blade is to the miter slot. I check mine every year or so.

@FlynndoggWoodwork Месяц назад

Excellent point! Thank you so much for sharing and watching hamilde! Really appreciate it!

@hamilde Месяц назад

@@FlynndoggWoodwork I started watching you when you only had 1k or 2k subscribers I think. I enjoyed seeing a woodworker that was as organized as me😉. I'm glad your channel continues to grow.

@FlynndoggWoodwork Месяц назад

@@hamilde Thanks so much! This youtube thing is making it more difficult than ever getting organized! :). Thanks for watching me over the last year or so. I can't believe I've had so much growth. Really am grateful!

@raywilliams9461 Месяц назад

Seems like accurate evaluations

@FlynndoggWoodwork Месяц назад

Thanks so much Ray! I appreciate it and thanks for watching!

@dang6832 Месяц назад

Do the Temu “Micro Jig” clamps also fit into the T groove to hold like the jig clamps?

@FlynndoggWoodwork Месяц назад

Yes, they should fit regular t slots. That is one thing I intend on doing with them for sure. Thanks for watching Dang!

@dang6832 Месяц назад

@@FlynndoggWoodwork 👍🏼 thanks!

@liquidrockaquatics3900 Месяц назад

@@FlynndoggWoodworkmore importantly, is the metal quality the same? A lot of the super cheap stuff is pot metal and not worth the time to unwrap; not always, but the super cheap metal stuff often has tin or something added to the alloy

@FlynndoggWoodwork Месяц назад

@@liquidrockaquatics3900 This is an excellent point liquidrockaquatics. This is something I should probably comment on in the future. I feel like a lot of times when you get things from temu, the metal feels light. Even lighter than normal aluminum. Something to watch out for sure I think. Thanks for sharing and watching!

@robertlevine2152 Месяц назад

Flynndogg, Good information as usual. When you use the dial indicator on the blade as in your video, I'm not sure what you are checking. Assuming the arbor nut is tight unless the blade is bent you should not find any difference. The dial indicator is used to check whether the blade is parallel to the track. This is done by marking a spot on the blade as far from the arbor as practicable. You should mark where the dial indicator is making contact to the blade with a Sharpie. Rotate the blade 180° and move the dial indicator to the spot that was marked. The difference will be an indicator of whether or not the blade is parallel. You can buy a calibration disk. This keeps your fingers safe from the teeth of the saw. The calibration disk, with some adhesive and sandpaper can turn your tablesaw into a disk sander. Bob

@FlynndoggWoodwork Месяц назад

Thank you so much for sharing this Bob - Great information really appreciate it!

@afpitbull60 Месяц назад

Well done! I've purchased several low-end tools from Temu. No issues so far. Don't think I would ever purchase a high-end tool from them.

@FlynndoggWoodwork Месяц назад

Thanks so much for sharing afpitbull60. I think that is the way to go. You can't go wrong with some of the low end stuff. THanks for sharing and watching!

@afpitbull60 Месяц назад

@@FlynndoggWoodwork I always find your videos both entertaining and informative.

@patrickflynn-fk8mu Месяц назад

I appreciate that!

@FlynndoggWoodwork Месяц назад

@@afpitbull60 Thank you so much, I appreciate that. I know my humor isn't for everyone, but I'm having fun with it.

@afpitbull60 Месяц назад

@@FlynndoggWoodwork For me, it's all about having fun. Otherwise, what's the point of doing it, right?

@jeffautry8892 Месяц назад

My question has zero to do with this video, I was wondering what and where did you find the insulation for you roll up door and does it allow the door to operate when installed ? Thanks

@FlynndoggWoodwork Месяц назад

Great question Jeff, it actually comes with insulation already attached to the door. If you google insulated roll up garage doors you should find plenty of options. Mine was made here by a local company here in Indiana. Hope this helps, and thanks for watching!

@richardanderson1152 Месяц назад

Te-wo wo thanks burt for your input tops as always

@FlynndoggWoodwork Месяц назад

Haha! Thanks for watching Richard!

@MemelordSupreme Месяц назад

That juice groove jig is tempting.. rockler jue came out with one but it's like 80 bucks! 😲

@FlynndoggWoodwork Месяц назад

I know, i saw that. I think I paid 50+ bucks for this one, so I might have spent the extra 30 to get it from rocker! Thanks for watching MemelordSupreme!

@mtnjak Месяц назад

Good video. I like knowing ahead of time if some of these budget items from China are any good. I wanted to let you know that I took the plunge recently and order a few items from Banggood. Of course, I want to support American companies whenever I can but the alternative to what I purchase is not actually from an American company and is twice as much for what I paid for its Asian equivalent. I'm referring to the Chinese equivalent of the Jessum table saw stock guide. I just started using the Hongdui guide yesterday. I have never used the Jessum brand but I will say that the Hongdui doesn't appear to be a knock off. It actually looks pretty identical to the Jessum guide. So much so that, and I could be wrong but, I suspect they are made from the same tooling. The guide works very well with no issues and it's half the price of the Canadian counterpart. I also picked up a 39" inch T square. It also appears to be very accurate and a good buy. With free shipping and taking a little less than 2 weeks to arrive at my door I can't complain! I thought I'd mention it. I wasn't sure if you've done any videos from Banggood or not. Thanks for the video!

@FlynndoggWoodwork 29 дней назад

Thank so much for sharing this mtnjak! I've heard some other viewers talk about hongdui as well. Sounds like they are putting out some decent products. You may have just gave me a future video idea! :). Thank you so much for sharing and watching!

@mtnjak 29 дней назад

@@FlynndoggWoodwork You bet!

@craigbrosinski1905 Месяц назад

Sorry, not ordering any cheep Chinese tools but did pick up the T-shirt you had on in todays video.

@FlynndoggWoodwork Месяц назад

I hear you! I'm sticking with amazon too. Thanks for watching and thanks for getting a t-shirt! really appreciate it Craig!

@ST-0311 Месяц назад

@@FlynndoggWoodwork Meh. Most of the same tools are available on Amazon, but for 50-100% more. Multi Angle Square: Temu - $11.24 Amazon $21.58.

@FlynndoggWoodwork Месяц назад

@@ST-0311 I agree, I'd rather pay the higher fee on amazon knowing that I'd get what I order and be able to easily return it.

@peterg0 Месяц назад

@@FlynndoggWoodwork Actually many products from amazon also made in China 🤣😂🤣

@FlynndoggWoodwork Месяц назад

@@peterg0 Yep, I agree, but amazon is american and is much easier to deal with in my opinion. Temu is a carnival! :)

@patrickflynn-fk8mu Месяц назад

Now that sounds like fun! Pizza, grandkids and wrestlemania! That is about as good as it gets!

@FlynndoggWoodwork Месяц назад

whoops!

@gruss5157 Месяц назад

The problem that I had with the Juice groove maker is that the screwhead did not fit my allen wrench and they would not replace it😢

@FlynndoggWoodwork Месяц назад

That sucks! I think we are on the same page with temu. I'm sticking with amazon!

@robertberger8642 Месяц назад

Good info, but… that type of mallet would normally be used for chiseling/carving, yes? If so, wouldn’t a harder striking surface be better than a softer one?

@FlynndoggWoodwork Месяц назад

Yep, someone else mentioned that as well. But I was hopping for a rubber one. That is part of the problem with this website, the descriptions are poor, and the pictures are misleading sometimes. But you are 100% right, this is definitely a mallet for chisels. Thanks for sharing and watching Robert!

@CorbyQ Месяц назад

Love me some Burt

@FlynndoggWoodwork Месяц назад

My alter ego! :). THanks as always for watching CorbyQ! Hope you have a great weekend!

@CorbyQ Месяц назад

@@FlynndoggWoodwork i appreciate that. Just watching Wrestlemania with the grandkids and ordering some pizza. Hope everyone in the Flynndogg woodworking family has a great weekend as well. Even Burt. Lolol. Such a great character.

@patcross5799 Месяц назад

I decided quite a while ago that TEMU may deliver, but the risk just isn't worth the occasional success. Still thanks for the fun Saturday Lunch video, enjoy your weekend!

@FlynndoggWoodwork Месяц назад

I'm 100% with you. If I didn't have this channel I probably wouldn't be ordering from them at all. This channel gives me an excuse to check them out for everyone, and I'm not convinced! Thanks as always for watching Pat!

@FrugalShave Месяц назад

What risk? If anything if not up to snuff they refund you instantly.

@eddiyws Месяц назад

I like your shirt 😅

@FlynndoggWoodwork Месяц назад

Haha! It's one of my favorites as well! :). Thanks so much for watching eddiyws!

@KangasAri Месяц назад

I've ordered from Temu several times and I've yet to receive a package that's as battered as you and other Americans seem to get. Not to mention anything being banged up enough for them to be damaged right from the start. I'd probably look at your local couriers / USPS / whatever delivers the last leg for those responsible for the damages. Otherwise I do agree with what I see often: A lot of the gear is often really tiny, some are really poor quality while others may surprise you, but most often you're just surprised for once you actually received something useful.

@FlynndoggWoodwork 29 дней назад

Someone else mentioned that when I did a video on this last time. I don't think it is my local courier but maybe customs. Many times you can tell that the packages have been taped over where there is damage. Thanks so much for watching KangasAri!

@CorbyQ Месяц назад

Pretty sure those holes in the red thing is either indexing holes or for some kind of centering jig. Idk i dont speak chinese

@FlynndoggWoodwork Месяц назад

Haha! Yeah, I agree with you. You would think they would include some pins with the tool. I think 1/2 the stuff sold on Temu is not fully thought out.

@10_rds_Fire_For_Effect 15 дней назад

@Flynndogg Woodwork I've only received a couple of orders from Temu. No packaging damaged at all. But what I have noticed is that stuff I've seen is counterfeit. I recently bought from TEMU an "Original' German made Hurricane lantern from an apparently well known German maker. The packaging says "MODEL IN GERMANY". The attached tag, which is a copy of the genuine makers tag says "MODEL IN GERMANY". The lanterns glass lens says "MODEL IN W.GERMANY". It has "W.GERMANY" embossed on the metal body. But underneath the base of the lamp it has the embossed words "MADE IN CHINA". But I have run the lantern for several hours and it seems to work fine… for now. It seems to be well made. I guess time will tell. So until it stops working, I will give it a "Chinese Clap" for functionality, and a "Chinese Crap" for dishonesty. It is clearly a dishonest counterfeit of the genuine German product. But it was dirt cheap. A very nicely made and fitting cap I bought from Temu has NO manufacturers label inside. That is dodgy.

@FlynndoggWoodwork 15 дней назад

Totally agree. That has been exactly my experience as well. I actually did a video on many of the issues you spoke of last summer. Temu also avoids paying import or duty taxes by making sure orders are less than $800 apparently.

@Damon_Barber Месяц назад

Thanks for reminding everyone why to steer clear of TEMU for any measuring devices. They just stick thin rulers in a bag to ship over the biggest ocean on the planet. It looks like either they are TRYING to improve shipping since a couple of items were in boxes, OR… and this is more likely… they got a deal on “scratch and dent” products.

@FlynndoggWoodwork Месяц назад

I 100% agree with you! I really don't like going to their website either, I feel like I'm going to a carnival website. It seems so confusing when I get on there. I'm happy with amazon, and that is where I will do most of my online purchasing! Thanks as always for watching Damon!

@radiko76 Месяц назад

You can return stuff to Temu, quite often they just give you money back ( in credit) and you don’t have to send the item back ;)

@FlynndoggWoodwork Месяц назад

Thanks for sharing and watching radiko!

@NathanTalbertWoodworking Месяц назад

Every once in a while i'll try downloading temu to see whats up. Every time I end up just deleting the app because of how pushy it is to pick your stuff and check out immediately.

@FlynndoggWoodwork Месяц назад

Yep, I 100% agree. Their website and app are like a carnival. Too much going on, too many deals, etc. I'm sticking with Amazon! :)

@NathanTalbertWoodworking Месяц назад

@@FlynndoggWoodwork agreed. besides amazon has us spoiled with fast shipping. I live in the middle of nowhere so I still only get 2 day shipping and the very rare next day shipping. my buddy lives in the cities and gets same day shipping on a lot of orders.

@FlynndoggWoodwork Месяц назад

@@NathanTalbertWoodworking I'm lucky enough to get same day sometimes, but usually next day. Most of the time plenty quick for me! :)

@Kreacher1974 Месяц назад

Ive ordered quite a few tools from Temu and have no conplaints yet.

@FlynndoggWoodwork 29 дней назад

Oh good! I'm glad to hear that. Sounds like you've had some great luck! Thanks for watching Kreacher!

@bastian1847 Месяц назад

I'm not sure it's fair to say the quality of the ruler isn't great based on it bending.... it was sticking out the side of a package, unprotected, after all :) I do like that you can switch out a more stable ruler, though.

@FlynndoggWoodwork Месяц назад

True, and point taken. Temu really has a packaging issue in my opion. Thanks for watching Bastian

@pinballrobbie Месяц назад

The fence is not supposed to be square, there is supposed to be a tiny relief from the front of the saw blade to the back edge for clearance. The wood will still cut parallel to the fence.

@FlynndoggWoodwork Месяц назад

That makes sense! Thanks for sharing! I guess that I don't need to make any adjustments assuming my variance was in the right direction. Thanks so much for sharing and watching pinballrobbie!

@pinballrobbie Месяц назад

@@FlynndoggWoodwork The same applies to the Sliding table fence, I did not know this for many years until a trainer from SCM came to our workplace and showed us how to set up the table saw. This is why you can't use both fences together when cutting sheet material.

@FlynndoggWoodwork Месяц назад

@@pinballrobbie Oh makes sense! Now you have me thinking about when you put the fence on the other side of the blade. I rarely put it over there, but probably something to think about! Thanks so much for sharing great insites.

@TrevorMatthews Месяц назад

Honestly I think it’d be a better video without Bert but I still appreciate the reviews

@FlynndoggWoodwork Месяц назад

Haha! You and me both! Thanks for watching and the feedback Trevor!

@FrugalShave Месяц назад

You forgot to mention that Temu has free returns and will refund you for any and all duds you get, so you don't end up spending any extra. Also the mallet is designed for striking metal tools not wood. So if it was soft it would be a compete fail as it fell apart very quickly.

@FlynndoggWoodwork Месяц назад

THanks so much for sharing FrugalSHave! And thanks for watching!

@mlrable 25 дней назад

I can't wait until my bright ass charges the wallet

@FlynndoggWoodwork 24 дня назад

Haha! Too bad it doesn't work like some of those motion winding watches you see. With all the twirking I do, I'd never have to charge it! :)

@bmacaulay18 Месяц назад

Can't be surprised when the tool that shows up is smaller than expected. Using a child's hand in the photo shoot to make it look bigger is no different than using child labor in the factory to make it cost less.

@FlynndoggWoodwork Месяц назад

Haha! That may be accurate! :). Thanks for watching bmacaulay!

@marypowell2994 Месяц назад

👍

@FlynndoggWoodwork Месяц назад

Thanks for watching Mary!

@themeat5053 Месяц назад

Dogg, man, sponsors now, what...? We got the Chinese clap, once. We knew you had a fat wallet after watching all the toys you've got. Paolini, Paolini, Paolini! Many push-ups...thanks. A lot tinier than you need to pound in those joints, eh? We think you should consider the carbide tips from My Wood Cutters, they seem to be well priced and ship quickly. Effing Burt.

@FlynndoggWoodwork Месяц назад

I know Effing Burt.... Haha, I need to check out My Wood Cutters, hadn't heard of that website before. Sounds very interesting! Thanks as always for watching meat. Effing Burt will be making an appearnce next week too unfortunately. At least that is the plan. Had a burt run in me a couple of weeks ago. :(

@themeat5053 Месяц назад

@@FlynndoggWoodwork Well, we suppose that Burt, in his own way, is trying to help.

@FlynndoggWoodwork Месяц назад

@@themeat5053 :)

@CorbyQ Месяц назад

Te-shit. Lolol good ole Burt

@FlynndoggWoodwork Месяц назад

Haha! You got that right! :). And that is PG rated Burt! :)

@theomoons Месяц назад

So, a temu review video, but hardly any functional links to the reviewed temu products, interesting.

@FlynndoggWoodwork Месяц назад

Yep, that is because Temu does not allow you to create such links, the products are constantly changing and I couldn't even find many of the products that I even reviewed. This is another issue with the website.

@theomoons Месяц назад

@@FlynndoggWoodwork what a Circus... Thanks for the reply.

@quakergrits4610 25 дней назад

The website literally says your information will be encrypted

@FlynndoggWoodwork 25 дней назад

Thanks for watching quakergrits!

@ronaldmoravec2692 Месяц назад

Temu is a company from the large country in west Asia. Support them at our country risk.

@FlynndoggWoodwork Месяц назад

Thanks for watching Ronald

@Pat64783 Месяц назад

I've seen a lot of videos about temu and I'm just going to stay away from it and stick with Amazon as well.

@FlynndoggWoodwork Месяц назад

Excellent decision Pat, I am 100% with you. Thanks so much for watching!

@paullalekna5478 Месяц назад

Temu is exactly the same as Amazon, they are both aggregators, they don't sell any products of their own but Amazon looks better because it has been around longer and is more polished

@apenza4304 Месяц назад

@@paullalekna5478 Except on Amazon you don’t have to worry about your credit card being charged fraudulently.

@roberttillotson4889 Месяц назад

So, Ekxter gave me 3.5% not 35%. Hmmmmmm...

@FlynndoggWoodwork Месяц назад

Hmmm, it should be 35% If you would like to send me an email to my email address I can follow up with them. My email is bflynnwoodwork@gmail.com

@VagabondTE 25 дней назад

This is just a personal opinion, but if you're battling with the company just to make sure you get what you payed for, then it's not high quality.

@FlynndoggWoodwork 24 дня назад

I would tend to agree with you Vagabond. Thanks for commenting and thanks for watching!

@michaelbradford4444 19 дней назад

Burt needs to go!

@FlynndoggWoodwork 19 дней назад

Thanks for the feedback and thanks for watching

@jimgott119 Месяц назад

I will never buy from TEMU. Ever.

@FlynndoggWoodwork Месяц назад

I don't blame you. I'm done with them too!

@user-zl1pj5ii1f 19 дней назад

You’re missing out. They have ALOT of good stuff. As a matter of fact, most of your Amazon items COME from temu and resold or straight from alibaba where all suppliers get their stuff 😂

@samcolt1079 16 дней назад

@@user-zl1pj5ii1f WRONG THE STUFF IS JUNK

@user-zl1pj5ii1f 16 дней назад

@@samcolt1079 no I’m right. It’s 100% facts. Your Amazon tools are junk as well 😂 keep crying

@swarf52 24 дня назад

If you want accuracy don’t buy Temu…..in general buy Temu buy crap

@FlynndoggWoodwork 24 дня назад

I would tend to agree with you on that. You really have to dig for decent items. Not something I typically like to do. Thanks for watchign swarf52

@ThePSMA Месяц назад

No!

@FlynndoggWoodwork Месяц назад

Thanks for watching thepsma!

@albertabs 7 дней назад

Temu is for DIY , it’s cheap ,not for professionals ,

@FlynndoggWoodwork 7 дней назад

Haha! I'm not sure I would even give them that much credit. Some of the stuff is just flat out junk! :). Thanks so much for watching albertabs!

@CycoBillywoodworking Месяц назад

you can the same stuff with wood made in squares and not support china

@FlynndoggWoodwork Месяц назад

Yep, you could do that! Thanks for watching!

@liquidrockaquatics3900 Месяц назад

It’s difficult to not indirectly buy from China anyway. Even products made in other countries are often made with parts sourced in China and other nations. It’s VERY rare to have a complex product made entirely from 100% domestically sourced, manufactured, and assembled in a single country except China.

@FlynndoggWoodwork Месяц назад

@@liquidrockaquatics3900 yep, I would 100% agree with you!

@TheGc66 Месяц назад

that alter ego bizness is hilarious!! its also indicative that you may need a friend.

@FlynndoggWoodwork Месяц назад

Haha! I won't disagree with you on both points! Thanks so much for watching TheGc66! :)

@TheGc66 Месяц назад

@@FlynndoggWoodwork digging that new shirt too, you need a "mass t-shirt deal" offering all of them at a discount, i can't decide,,, theyre all like the mantra's to my life.

@patrickflynn-fk8mu Месяц назад

That’s a great idea, I’m actually contemplating building another one for my shop as I love it so much. So useful!