No video :(

Does this $15 3M Headlight Restoration Kit ACTUALLY Work? | 3M Headlight Restoration Kit Review

Подписаться 56 тыс.

Просмотров 13 тыс.

50% 1

This is a How-To and Review of the 3M Headlight Restoration Kit (39008)! In this video, I'll be putting this $15 Headlight Restoration kit to the test to see just how many stains and imperfections this will remove from the headlights on my Hyundai Azera. Be sure to subscribe and set notifications on so you don't miss any of my other exciting content!
⬇️ PRODUCTS USED IN THIS VIDEO:
1. HEAD LIGHT RESTORATION KIT: amzn.to/3XgTUxx
2. DETAILER & CLAYBAR KIT: amzn.to/43Lt3vL
3. DEWALT DRILL: amzn.to/43OWzAR
⬇️CHECK OUT THESE OTHER LINKS:
🇪🇸 GV ASPIRATED EN ESPAÑOL: • Todas Las Modificacion...
📸 GV ASPIRATED Instagram: / gv_aspirated
🌳 GV ASPIRATED FAVORITES: linktr.ee/gvas...
✉️ For all business inquiries, please contact: gvaspiratedoffcial@gmail.com
⬇️ OTHER VIDEOS YOU'D LIKE:
▪️ Seat Covers for 6th Gen Camaro: • Kustom Interior Camaro...
▪️ ALL THE MODS on my CAMARO SS: • ALL THE MODS on my 5TH...
▪️ ChatGPT to reviewed my Camaro SS: • I asked ChatGPT to rev...
Chapters:
Tools Needed - 01:03
What Comes in the Kit - 01:46
Prepping Headlight - 02:15
Sneak Peak of Final Result! - 03:15
First Sand Paper Grit - 04:29
Second Sand Paper Grit - 05:31
Last Sand Paper Grit - 06:14
Final Polishing Step - 07:34
Final Results! - 08:16
#3m #headlightrestoration #diy #hyundaiazera
******************************
Music:
1) DIJIBB - YOUR ROYAL HIGHNESS TRAP | No Copyright Trap | Music provided by ƁƝƁ Productions
******************************
*PLEASE NOTE: Monetized, Affiliated & Sponsored Content may be included in the video or description. If you make a purchase on items shown in the video or through a link used in the description, I may get a small commission. Thanks for your continued support on my Channel. Driving clips may be exaggerated for entertainment purposes. Please Drive Safely & Modify under state laws.

Опубликовано:

19 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@cartastrophe Год назад

3M is the best restoration kit. The only thing I would recommend is some type of sealant like ceramic coat or wax. The headlights will go back to being foggy and yellow after a month or two without some type of sealant.

@danielboone8256 10 месяцев назад

Is there a specific brand that comes to mind for the sealant? I saw one person use Meguier's Headlight coating, do you think that's a good product?

@keithroberts5611 10 месяцев назад

@@danielboone8256Definitely the best in my opinion 👍

@keithroberts5611 10 месяцев назад

I have used this kit and tobe honest much much worse condition than yours!! Because I had to remove old baked on Clearcoat from the previous owner, That said 3m kit provides extra p500 disk for this very purpose!! IF the disk clogs up its either because your pressing to hard or there's residue left over from using that clay bar and washing the headlight which is totally unnecessary as the surface is being removed anyway?Another issue was the drill just one speed or variable 2speed? At stage three the p3000 trizact pad you run the drill a little higher speed as water keeps the friction down,When applying tap water to the pad + lens you keep the drill moving evenly over the lens until you notice a white slurry over the lens, Don't repeat this process again!! Then use any glass cleaner spray wipe and dry lens before applying the polish again higher speed keep moving the drill slowly!! When your happy with clarity and shine stop if not add more polish and continue until its clear!! Then add a clearcoat as mentioned by other comments, Always use micro fibre cloths, And please pop the hood first saving time and tape, Mine was done 6 months ago and in show room condition, Its all about After care, But that's another Question!! Anyway yours turned out OK just needs refining somewhat!!!🤔🇬🇧👍O just a foot note dont wash that ripple orange foam pad after use!!

@MichaelBlast Месяц назад

Don't wash that orange 3M finesse it pad. That's what The Headlight Restoration Pro preaches in his videos. I unfortunately washed mine after my first set of headlights when I bought the $40 version of this kit. I bought a extra box of p500 and p800 and I think now I have to get new Trizact 3000 discs as well. I also used the chemical guys headlight restore and the 3D headlight restore as polish w some Sonax and a orange Griot's pad. I was going nuts trying to get it perfect.

@trentmurray1770 Год назад

I don't even know how my 6th gen be fogging up like that. I'm going to try this out.

@Bawla187 7 месяцев назад

I see what you were trying to do. I feel you should have sanded a little more using the 500 grit. Also, I would suggest a headlight protectant like Megiars Headlight coating as the yellowing will return within months

@MichaelBlast Месяц назад

I had some problems on my 2nd car and may have worn out the 3000 Trizact disc from the 1st car headlights. Use chemical guys headlight restore instead of the rubbing compound or in addition to. That is how the RU-vid channel: The Headlight Restoration Pro, teaches an advanced version of this method. I added using a 3" orange Griot's pad first then I used the 3M orange finesse it pad and they look good but I was trying for perfection

@danielboone8256 10 месяцев назад

Helpful video and description, appreciate it

@Maximonious 3 месяца назад

They are not "yellow stains". That is oxidation of the clear coat put on at the factory. Also... there can be "fogging" INSIDE the lens. There is nothing any kit is going to do about that. Sometimes, water gets in there as well, leaving a mineral like residue on the inside. Also... sometimes... a little hand sanding around the edges is needed.

@XxChuyoxX 8 месяцев назад

You did a pretty terrible job of sanding thoroughly. That is the most important step in order to remove all of the surface imperfections on the headlight. You could still see the uneven sanding marks before you polished out the sanding marks. The wet sanding marks should be uniform before polishing.

@finn3408 8 месяцев назад

Just get it done

@keithroberts5611 2 месяца назад

At the beginning you mentioned why would anybody want to restore there headlights!!!! Well for a start here in the UK we have a yearly vehicle inspection, And if your polycarbonate lenses have deteriorated to extent that performance is degraded, Your car will fail the test!! Its either replacement or restoration!!! 🤔