Don't Get Hung Up On the Rivets! Window MOTOR AND REGULATOR Replacement on a 95 Ford Ranger 93-10 

1/2 inch long bolts work just as well and are easier to find. But you saved me a lot of trouble with those rivets...this technique worked just as well on my 95 Explorer limited, though I had to fight through a lot more gadgets and.....stuff. Thanks bro!

Thank you so much for this video. I just changed my drivers side 97 Ford Ranger motor and regulator. Couldn't have done it without your step by step.

Hilarious and very helpful. Good title too, rivets are my mortal enemy.

honestly the best video on how to do this I've seen

Dude this video was pretty awesome and informative. I know exactly what I'm doing this weekend

THAAANK!!! YOUU!!! 👏😆🙌😍 I needed this 💪💪❤ EXTREMELY INFORMATIVE AND SO EASY TO FOLLOW!!!

Good advice, better commentary. Thanks for saving my 93 Exploder's windows!

Thanks buddy! Enjoyed the video!

Epic soundtrack

The rivets are easier to remove if you PUNCH OUT the center metal pin with a punch and a ball peen hammer , then the aluminum rivet will drill out, using small drill and work your way up to 1/4 inch. I had to learn this the hard way too.

This video helped a ton I just finished changing mine out

Best repair video ever. "It's like taking a baby out of a pregnant woman" is the best line I have heard, then "Just wiggle it back and forth" that cracked me up so much that my wife thought I was having a seizure. LOL

wish I could buy you a beer. You saved me some money brother thank you...much appreciated.

lmfao bro you funny. but seriously, this is the ACTUAL video on how to replace the regulator. theres about 4 big brand channels that overcomplicate this. thanks for the simplicity!

See this is a good one finally

Ur assuming that when the motor stopped that would be the position to re-attach it. Not the caae with mine. When i took the old motor out i connected it & it worked intermitently. I guess now i have to get it in either full closed or open position & then bolt it in right ?

What length of 1/4 bolts did you use

Good job, very helpful , thanks

We have very different images on which way a baby comes out! Hah

Does this fix the lock and unlock problem

I would suggest those nuts, be of the locking variety. Hope this helps?

Thanks man

Nice video

Help! Other videos said to remove rivets holding window. I did not notice if you did that. It can be done with out doing that?

needle nose plies to hold the bolt? I use a popsicle stick with duct tape wrapped around the tip. Stick the bolt on the duct tape and it will be able to slide into the thinnest of area. Visualize the nut thru the hole and then place the bolt thru it. baddabing, baddang!

Very helpful video but the high I was on after watching the awesome video was countered by the interpretive dance. 😜

I see the window is done a slight bit,,is that the the right amount?

tacky, yet delightfully satisfying. 5 stars.

Yep, pretty good video, new subscriber,,

i love your analogy of popping the unit out like a baby...Ha ha ha thats too funny...LMAO !! i'm having to change both window motors. they work but when they reach the top they make a clicking sound like very annoying..but they go down with no issues.. maybe they need to be realigned or repositioned.. does anyone have a clue what im talking about.

3/8 inch long bolts. Did you buy them or did you have to cut them that short?

👍

I have a 93 thunderbird , windows dont go down or up . they started slowly over time , the motors or regulators ? sound good but wont go up or down no more . any help

...BUH-BYE RIVETZZZZ!!!!! 😉😁👍

Use a punch to knock the center of the rivet through.

I had to rip a baby out from the junkyard this morning

Here is a video to show the easiest and quickest way to remove the rivets. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c9D5WkwbRQg.html

heeHeeheh good help and "subscribe, press bell while ¶still on emoshinil high from video¶🎶👏☺️😅stands out! good wurk🙏

bad comparison with a pregnant lady

Horrible editing dude