DON'T order an exterior door till you watch this video! 

Matt, thank you for showing this lock & all it's features! I've been designing commercial security systems for nearly 2 decades & have always been disappointed when looking for a truly secure smart-lock for my own home. You just made my week with this!

"Perfectly installed a little bit out of plumb"! Sounds like every door I install.😀

*Matt Risinger* Very nice, thank-you sir for taking the time to show us. God Bless.

I wish Endura would list certified OEM's on their site. Looks like a great solution but to force the builder to hunt around for someone who has experience adding this system in is a time waster.

Love this. I'm a homeowner (on the verge of becoming a builder) and would love this for all of my swing doors.

FINALLY! I'm Florida and I've seen so many houses with multipoint locks (They're good for sealing a door during hurricanes) and I've always been confused by why they don't work like normal locks, especially since they're using very similar locking hardware. AND NOW WE FINALLY HAVE ONE THAT DOES. All I need them to do is design one that goes fully around the edge of the door and I am sold 100%

So awesome...thanks for the video!

Good ideas and impressive. But as long as it's plastic like that, no deal. There should be a 100% brass option like any other door hardware and that includes the battery cover.

Good job Matt we are just about to put new french doors and patio doors in our old ranch house. Now I went these...

I like this guy! “Let’s get going “!

I recently bought a sliding patio door from Menards and I chose a burglar resistant version. The millwork guys said that the company brought in a sample and let them hit it with bricks, bats, and crowbars and none of them broke through the glass. The sell windows too. That's what I'm putting in my next house.

They need to work with all USA door mfgs to make this standard. Much closer to REAL expensive Passive Haus-rated doors in performance than now available.

Genius and slick

The fake air attacker used as a test to prove that the door design is robust enough to cope with an external impact.... might be a non-representative test because involves safety. Ideally should be done with the same device used by Police using the same procedure. Then, in my view, the test is representative. Just a comment in here.

You know it will be a 10 min sales pitch, when it is complicated to lift the handle to lock your door.

I love to watch door installation

not available for individual purchase? how can i get one of those if i am looking to upgrade an existing door in my home?

I was very interested when you showed this before. Glad you gave it a spot. Level lock is a invisible version of the smart locks. I hate the bulky boxes.

Very Cool!

as usual AWESOME👍😎

Makes me wonder how long it would take the Lock Picking Lawyer to get in.

I love this.

That is really really cool

I’m so relieved that Noho Hank is OK.

Love your videos

I want those at my house. Seriously, i've wanted to have a new door since i bought this place but really wanted something that seals better and has more security. This is perfect.

You've gotta wonder how many people will buy this system for security, only to install shitty, easy to pick locks 😂

Excellant !

I just want the hardware. I know I can retrofit that in most old doors. Awesome system!

Internals made of plastic... I had one of the Larson security glass storm doors on our last house, which housed a metal version of the same mechanism. Lasted three years. No thanks, especially at the price-be happy that you are getting them for free Matt.

this is GREAT!!! Any info for those of us looking to upgrade our security with sliding glass doors?

Doesnt routing out a door pocket of this increased size weaken the door to such a degree that it would just be easier to kick the door open?

The lock mechanism is good. The electronics, not so much. Bluetooth is notably insecure. The electronic lock is a convenience, not a safety system. However, given how easy locks are to pick (Watch the Lock Picking Lawyer for example), I suspose it is all about the same.

This is really nice. I would have liked NFC tags instead of using my phone. They don’t need software updates or security patches.

I'm all for security, but thieves take the easiest way. If the door looks too hard, it's a pin prick to a window and they are in and out within 1 minute with anything worthwhile.

Hi Matt, all you need to get into that and any modern lock is a hammer and screwdriver, you put the screwdriver into the lock hole and hit it with the hammer nonce and turn the screwdriver

Very cool

Cool & NICE

Tell them to come to Canada !

Cool door.

I think this is awesome, another question I have is some states require that you install a Deadbolt that only shows on the inside if you want to rent out the home at a later date. Does this product allow that to happen?

I have been thinking about this for 10 years. How we don't have 3 point locks on the active doors with standard hardware is beyond me - and now we do!

I'd love that on my steel fire door!

Great video! Any recommendation for other safety door and window brands to look into?

Doors are fun!

It looks like a better evolution of a deadbolt but it does look a little cheaply made. I'm not trying to be a jerk but those plastic housings and the latches look like some white metal like zinc and those coiled battery springs just look like it could be more robust. I could be totally wrong but that's how it looks in HD on my screen.

Oh crud. That bluetooth thing is almost certainly vulnerable to repeater attacks. Basically someone outside puts a high gain antenna pointing at your phone and relays whatever it sends to a low gain antenna outside the door and vice versa. From the door's POV your phone is outside the door even though it is actually on your nightstand. This could be mitigated by the lock requiring interaction with the phone (at least some of the time, such as when you are usually asleep or at work). But having those fins activated electronically does open up some great possibilities. For example the system could activate the fins when the door closes (but is not locked). In this mode they would retract when the entey set is operated. This would reduce a lot of air leakage on doors that are frequently accessed. It would also help on interior doors where sound transmission matters. This might open up the market to putting this on bedroom doors (without a deadbolt)!

I custom install/repair multipoint locks and have not been impressed with Endura products longevity hitherto. They fail enough I keep their parts in my service van.

It’s nice to see Endura has continued engineering the W&F multipoint. They were always better than the Hoppe that THERMA TRU sold. Hopefully this newer design is even better.

Deja vu - ish feelings watching this

had to comment. selling doors and hardware to contractors since 97. 1. multipoint locks are used by door manufacturers because they help prevent warp related replacement claims, and here in Florida they have to pass testing for water penetration, and a multipoint lock is better than a deadbolt and lever for that. They aren't necessarily stronger than a deadbolt or mortise lock on an outswing door, and get hung up and bound locked/unlocked far more easily than a latch and deadbolt. 2. We use pallets of Endura's thresholds every week, but the Endura rep won't even say the word "trilennium" to us, which was Endura's last multipoint lock which quickly became as popular as Ford Edsels and New Coke. Can only estimate spending at least 50 hours troubleshooting those locks, and I hardly saw any of them compared to Hoppe and G-U. 3. The bad news on all of these new electronic locks is that the electronics never have more than a 2 year warranty(often 1 yr), and the word "electronic" adds $200-400 to the price. They don't sell the boards separately, so you are buying an entire lock when you know all you need is the electronics. When I tell people that, it's like I just killed Santa Claus. And Schlage, Emtek, Kwikset, Baldwin et al don't include weatherstrip/gaskets with their locks, which would be a good idea on an exterior door with electronics inside. Check with your local door company, they can tell you about the call backs more than the company showroom display. And ask about the electronic warranty before you buy anything. Most people are stretching to pay for an electronic lock, but they don't plan on shelling out $400 every two years.

ABOUT TIME a company saw the need, can you buy a stock door ready to install or is it custom only

Matt I just put a new door In my home that is 2-1/4” thick. This would be a great addition for the double seal, A3 rated door. How do I get this?

You'd think routing that much material out of the door would make it extremely weak.

fact check true for everyone should watch that video before deciding on the right kind of new door.

What’s the link to your video show casing that attic lift?

Matt, what door manufacture do you use/recommend for security doors?

What about sliding and bi-fold patio doors? Is there a recommended smart and/or keyless solution for those?

Very cool but a 5 or 6 pin core lock can still be picked in 30-60 seconds.

Wow. That system, a Bowley lock and hinge security pins... that'd keep the thieves at bay.

Hhmm i am sticking to the old fashioned way just add keyless deadbolts!

That is something that is quite standard in Europe. But good to see it adapted to US locks

This is how all the front door have been here in Europe for the past 30 years. You guys are just getting this now?!!

Can you do this on garage doors Fridge door

Thank you, but no thank you. I have enough "smart" things in my life. Don't want to be switching batteries on anything.

Add some hinge pins, 6 inch screws and a pop up door barricade and they'll have to go hears Johnny to get thru the door

What is the R value of that door? And why are you not aiming for high efficiency doors with 2 or 3 or even 4 inches of polyiso foam sandwiched in the middle to make them ultra warm?

Is it Z-Wave compatible?

Bluetooth-based systems are often vulnerable to replay attacks (record when you unlock, replay the code to unlock when you've left) or extension attacks (stand next to you at the grocery store and route the bluetooth signal from your phone over the cell network, essentially "extending" the bluetooth range to any distance). It's possible to eliminate the replay attack with a good design for generating codes, but bluetooth doesn't really offer high precision timing information needed to mitigate the extension attack. Is this something they consider? The Apple Watch can unlock Macbooks by proximity, but the system ensures the watch is within a few feet of the laptop by only unlocking if the response signal returned within a couple *nanoseconds, which is the time it takes for light to traverse from the laptop to the watch and back* (plus a time-optimized response circuit). Any extension attack cannot break the speed of light so it won't work.

Since the hardware can be selected separately, which keyless (maybe biometric or keypad) hardware is recommended?

seems like the US is a bit behind the EU on this one, we've had a hormann front door for years, that has all the fingerprint/keypad and app functionalities they talked about, ofcourse also a "normal" key opening but using a special type key. its closes with the standard lock bolt, 3 hooks (like their butterfly) and 3 steel pin's. (on the automatic doors, if you only want a key there's actually more hooks and pins) 100mm thick (~4inch) steel frame with insulating foam, triple pane safety glass, triple weather sealing and a build-in drop down seal when the door closes... and though not cheap its actually not crazy expensive starting at 3K (ex install)... hell even the door on my fathers house is 30years old and has a 5-point lock

This is Matt Risinger advertisement for PanoLock system. It is NOT compatible with most smartlocks. It does not use your lock manufacture hardware. The lock part is really in the middle between deadbolt and the nob. Special trim kits are white plastics (the reason for this door). U can buy this from ABP. This multipoint system has issues, it uses fiberglass reinforced gears. These gears are failing quite frequently (rumors). Unlike Nest & Yale hardware the smart hardware can not be externally powered, nor has digital keyboard. These locks are easy to open. Bluetooth is unreliable [2 year warranty] and can not be replaced without replacing the entire lock. Be aware there are issues with this system and all MultiPoint's, but if you have 8' door they do help to avoid warping. Alternatively you can rout a steel plate.

There needs to be a retrofit kit, for existing doors that don't seal properly.

I recently found a multipoint lock door with 18 points of contact at home depot. The door felt rock solid and operated just like a normal door, only difference: many key turns to close the door.

Can this be used on double metal doors?

Matt,,Endura Data Sheet(s) are where?

Really hard to find online info on Entry Sync or whatever you call it. Would be helpfull if you provide a link.

Interesting premise, but I want to know if this is HomeKit enabled and what level of software security testing has been done on the software. Having a way to use the battery pack as a power backup but also running a power line to and through the door hinge would be great in the event of a power failure. The fact that they didn't show off the app or whether it uses HomeKit to enhance privacy and security concerns me. I'd also like to know if this supports any higher end locks that are harder to pick, etc.

Looks good but the deadbolts look a little short. Might be vulnerable to frame spreader.

What happens if the batteries die while the door is closed? Any way to open it then?

Lock Picking Lawyer: Click on 1...

Lockpicking Lawyer: 4 seconds to pick this lock

Sorry maybe I missed it but does this work with WiFi and Bluetooth while using a phone and will it work in a power outage? Also is it a slower opening and closing procedure? As in when you unlock it do you have to wait a second or two for it to unlock and pull back those locking blades? Is this product available outside the USA? I’m in Canada.

How about electronic deadbolt compatible

Does EntrySync support Matter so that I can operate it with the SmartHome tech of my choice?

Does Endura make any products for Dutch Doors?

What about if the batteries die??

This is impressive. As an engineer that is fairly tech savvy I find smart home devices neat but not really that impressive. They seem to be a logical progression of technology. This door system is truly impressive set up. I will be looking into getting one of these on my house.

Anyone that's real about security would laugh at the Bluetooth pairing to your phone to unlock..... It's not that hard to replicate that connection with a little grey hat Linux skills. The tri point lock also does not look that secure.... Better than one I guess though.

"This is the Lock Picking Lawyer, and what I have for today is..." @LockPickingLawyer

I much rather prefer to install a foyer entrance space room with an all metal security bar door to act as a buffer initial entrance door then just a regular insulated secondary entry steel door into the home. Anyway this all begs question how secure or small proof are your windows? Are they 1inch thick plexiglas or laminated glass theft deterrent? With enough funds I guess most anything is possible

I live like 20 minutes from Endura!

Why not integrate a smart combo lock on it.

Why try to cram this system into a thin door? This is the type of thing that belongs in the doorjamb which can be sized to fit during construction or modification AND could be set up to lock BOTH sides so a hinge side attack wouldn't work either. I've seen several house entryways where the security door AND doorframe were knocked in because it was only attached to the wall framing with 3 screws on each side.

Why is the so hard to find?

Why does everyone install hardware in the door that grips the frame instead of installing the hardware in the door frame and gripping the door? A frame mounted system would eliminate most size limits of the hardware and make charging the batteries easier. I, personally, have no problem with the lock being mounted on the wall.

Are these locks available in Germany?

Not a bad idea, seems like every exterior door I install is always warped or crowned the wrong way. If the door was checked before machining that wouldn’t be a big deal.

I’m not American, can someone tell me what a trim set is please?

Matt, do you know any good door carpenters in the DFW area to recommend? I really want pano lock, and it’s been a struggle to find someone who will order the door through bmc.