Door restoration. Adding Height to this Old Pine Door.

Подписаться 57 тыс.

Просмотров 72 тыс.

50% 1

Thank you for joining me on this one, A similar video to the external door repair video here - • Rotten Door, Full Repa...
I am splicing the Stiles of this door and adding height to both Stiles and the bottom rail. Not as quick as screwing a piece of pine to the door bottom but a much better and correct way to do such a repair. While it may seem a costly thing to do, finding another matching door the right size would take an awful lot more time!
Here is a few links that may be of interest
Reasonable quality, reasonably priced multitool blades - amzn.to/3t5Z3Lg
PU Glue I used - Wurth - eshop.wurth.co.uk/Product-cat...
My personal Preference Pu Glue Woodweld - www.constructionchemicals.co....
BMI Panel Tape - amzn.to/35OARo6
If you’d like to support the channel so we can make more videos please consider becoming one of our Patrons or sending a one off donation Via PayPal
PayPal Donation - paypal.me/OliverBradshaw
Patreon is a simple way for people to support the channel with a minimal monthly subscription.
If you'd like to support us go to our Patreon page here - / bradshawjoinery
Or you can buy me a beer here - BuyMeACoffee.com/BRADSHAWJOINERY
Help support the channel when shopping on Amazon, if you click this link below before buying anything on amazon, I will receive a small percentage of the sale price. It will not cost you any more, so please help me out if you can.
UK: amazon.co.uk/?tag=bradshawjoi...
US: amazon.com/?tag=bradshawjoi0c-21
INSTAGRAM ► / bradshawjoinery
FACEBOOK ► / bradshawjoinery
WEBSITE ► BradshawJoinery.co.uk
qpwoeirutyghfjdkslazmxncnv90
#Joinery #Woodworking

Хобби

Опубликовано:

12 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 222

@davidgroves7342 2 года назад

Love the Double Wadkin disclaimer 🤣 🤣 🤣 Amazing work as usual! Thanks for sharing 🙏

@BradshawJoinery 2 года назад

Haha! Not going to lie I'm in love 🤣🤣

@ianwatson9096 2 года назад

Thanks for another great lesson. Also, thanks for introducing me to PU glue in gun form. I've used bottles of PU before, but there are so many advantages to using it with a gun. I didn't even know it existed in that form until you showed us. Keep up the great videos.

@BradshawJoinery 2 года назад

Thankyou Ian, yes "what glue is that" seems to be a common question. I didn't realise it wasn't so well known, and now it's mentioned most seem to use the bottled version which is just the devil's own juice...

@conscience-commenter 2 года назад

Thank you for taking the time with that undersized door . Most people would have chucked it . You properly restored it for many more years of use . It may look like an average pine door but is forever " The Bradshaw door ".

@BradshawJoinery 2 года назад

Thankyou, it certainly will be and hopefully live on for many years!

@royordway9157 2 года назад

That is some nice work. I'm a new subscriber from Bath, Maine, US. I have been doing carpentry for 47 years.I have done a few jobs like this but not many. You Sir are a real craftsman. I'm glad I stumbled across your channel.

@BradshawJoinery 2 года назад

Ive just visited Bath, but the Uk version haha. Thankyou for the Kind words!

@woodpurposedmechanic8299 Год назад

I built three of these doors for my old house. When we sold it to flippers we asked it they would use them or throw them away. They let us take them rather than throw them away. I hope that someday someone takes as much care for my doors as you have for this one.

@BradshawJoinery Год назад

Nice one, What a shame. Im lucky to have clients that appreciate the beautiful things.

@montedaestrada3563 2 года назад

Love your restoration projects.

@BradshawJoinery 2 года назад

Thankyou, they do seem to be very popular 🙌

@alberttibbets6567 2 года назад

It came out so nicely. Thanks.

@BradshawJoinery 2 года назад

Cheers Albert!

@popcornlover948 10 месяцев назад

I could watch your stuff all day every day. Thank you for what you do.

@lisacole690 Месяц назад

Beautiful work 😮

@normancoutts 2 года назад

I had no idea that work of this quality and requiring such skills still happened. Great to watch. All the very best to you.

@BradshawJoinery 2 года назад

Tha kyou Norman that's great to hear. All the best to you

@122MLJ 10 месяцев назад

Amazing talent 😮

@yt66228 2 года назад

Amazing beautiful work! A true craftsman!

@BradshawJoinery 2 года назад

Thankyou so much Paul 👍

@2255buck 2 года назад

Beautiful work !

@BradshawJoinery 2 года назад

Thankyou Joe

@dyoooooooooon 2 года назад

What a fantastic video. Both informational and entertaining.

@BradshawJoinery 2 года назад

Thankyou Very much!

@lesterdewey7644 2 года назад

Great explanation with lovely workmanship Thanks Ollie

@BradshawJoinery 2 года назад

Cheers for that Lester

@montewoods4766 2 года назад

Very nice workmanship!

@BradshawJoinery 2 года назад

Cheers Monte

@Sibbe2560 2 года назад

Skills all over the place. Love watching this…👍👍

@BradshawJoinery 2 года назад

Cheers matey

@sheepskullcaver 2 года назад

Fantastic job proper craftsman

@BradshawJoinery 2 года назад

Cheers for that 🙌👍

@dougsaunders8109 2 года назад

Lovely job Ollie as always. Look on Otis face is the same as our dog gives when it is raining!

@BradshawJoinery 2 года назад

Cheers Doug, Yeah haha, hed sat there so long he didnt quite believe me when i said walkies

@michaelplays2449 2 года назад

Great video, very enjoyable thank you !!!!

@BradshawJoinery 2 года назад

Cheers Michael

@TheNorthernmunky 2 года назад

Awesome as always pal!! Keep em coming - Logan

@BradshawJoinery 2 года назад

Cheers Logan!

@Cradley684 2 года назад

Another great job, great restoration, have a nice day !!!.

@BradshawJoinery 2 года назад

Thankyou very Much Brian! Appreciate the support :)

@lissataylor12345 2 года назад

Beautiful!

@BradshawJoinery 2 года назад

Thankyou Lisa! :)

@1myfriendjohn 2 года назад

Beatiful work as always man.

@BradshawJoinery 2 года назад

Thanks matey 🙌👍

@leftwichprojects 2 года назад

Another great video Ollie, a lovely repair job on that door 👌

@BradshawJoinery 2 года назад

Thankyou Jason 👌👍

@tonyworkswood 2 года назад

Great job Ollie enjoyed watching. It's good to see alternative methods not seen before. Tony

@BradshawJoinery 2 года назад

Cheers Tony! 👍

@dsdragoon Год назад

I like the way you modified the door.

@BradshawJoinery Год назад

thanks±!

@MHTutorials3D 2 года назад

Great video as always

@BradshawJoinery 2 года назад

Cheers Mike 🙌

@liambrophy7574 2 года назад

Lovely job the dog part was brilliant

@BradshawJoinery 2 года назад

Thankyou Liam! Haha it was about 8pm 🤣

@WayneMacDonald1 2 года назад

Lovely fix! Thanks for explaining the reason for the beveled angle on the joint. Makes perfect sense but I'd not have thought of it.

@BradshawJoinery 2 года назад

Cheers Wayne! 👍

@HSkraekelig 2 года назад

Brilliant repair. I'm inspired to use my new multitool in ways I would not have thought of before. Thanks!

@BradshawJoinery 2 года назад

Cheers matey, yes its a great tool!

@benjaqsonworkshop9974 2 года назад

Great to see how you use even the simplest of jigs and guides to create a perfect looking joint. Thank you.

@BradshawJoinery 2 года назад

Cheers Ben!

@handyjim 2 года назад

excellent job

@BradshawJoinery 2 года назад

Thanks Jim

@andreacordonier9257 Год назад

I have eight doors of a similar vintage to extend, so this was fantastic! I'm a little light on the Festool gear I'm going to have to beg/borrow/steal from friends and work my Fein.Thanks tons, Andrea

@BradshawJoinery Год назад

THankyou Andrea, thats brilliant to hear.

@stevefromlondon9175 2 года назад

As I said before so nice to see a skill still alive in our throw-away world Regards Steve UK London

@BradshawJoinery 2 года назад

Cheers Steve! Its not cheap which is why it is dying out i guess

@jimbartley9125 2 года назад

Very nice to see a quality repair. The door will be good for the next hundred years. Well done. Very informative.

@BradshawJoinery 2 года назад

Cheers Jim, hopefully! It will make a nice piece

@martinbrice9802 2 года назад

Mate that’s a quality repair love watching your work thanks for posting 👍🏽 so nice to see old doors being restored and used again. 😄

@BradshawJoinery 2 года назад

Thankyou Martin! Appreciate it. I love keeping things alive too!

@carllamb6711 2 года назад

Perfection at its best I could watch you all day iv learnt so much from your videos thank you 👍👍👍👍

@BradshawJoinery 2 года назад

Thankyou Carl 💪🙌

@markfiges999 2 года назад

A nice bit of PROPER woodwork.

@BradshawJoinery 2 года назад

Cheers Mark! 👌

@joshscunthorpejoinery Год назад

Would be fantastic to workalong side some one like yourself, I would learn so much, its another side to.joinery I never get involved in, regretfully realy inspiring.👍 top work as allways.

@BradshawJoinery Год назад

Cheers Josh, Trouble is there is such a broad spectrum of work, its a good 5-7 years of experience before you get to grips with it all, then you can start mastering it.

@peetkoolstra3891 2 года назад

Great to see that there are still crafrsman how knows to do this kind of restore jobs. Unfortunatly there are less people with this gift and plesure in this work.

@BradshawJoinery 2 года назад

Thankyou, yes there are less trained people now, hardly any Proper joinery apprenticeships available or places making proper joinery/mastering the trade.

@realbartlett8882 Год назад

To oxidize that fresh wood you could try brushing on a potassium peregrinate solution. Should darken it enough to blend in.

@BradshawJoinery Год назад

Thanks matey, ill remeber that one

@hermenegildorodriguez6876 2 года назад

EXCELENTE RESTAURACIÓN .. DIGNA DE UN PROFESIONAL

@BradshawJoinery 2 года назад

Thankyou Very much! 👌

@markrussell9719 2 года назад

Great job Ollie - Otis is cute.

@BradshawJoinery 2 года назад

Cheers Mark! Too cute, gets away with all sorts

@michaelchapman4269 Год назад

I’d rather have a door like that than a new one! Beautiful work as always

@BradshawJoinery Год назад

Cheers Michael. Yeah i love the old pine doors too.

@paultay23 2 года назад

I say this every Video Ollie...masterclass again...I might even get the opportunity to put this into action one day...Cheers Paul

@BradshawJoinery 2 года назад

Haha thankyou for the support Paul! 👌 Hopefully it goes well if you do, it's not all that difficult tbh!

@gordonagent7037 2 года назад

I’m slowly working through your playlist and as with this post, your work is incredibly well done to a very high standard, which is an absolute credit to you as a tradie who takes pride in his craft and to the satisfaction of the clients expectation. Thanks for all the tips along the way. Take care

@BradshawJoinery 2 года назад

Thankyou Gordon, good to hear, I try my best! Thankyou for the kind words

@baloo021063 2 года назад

brings back memories👍👍.jobs like this was what I served my time on, not to forget the best window ever designed the sash n case window, long as the painter didn't paint them shut tho lol, another great video fella cheers Ross

@BradshawJoinery 2 года назад

Yes I have a few sash windows at my parents to repair. I made the sashes about 4 years ago 😂 still not got there

@rick91443 2 года назад

Beautiful work, as usual...cheers...rr Normandy, Fra.

@BradshawJoinery 2 года назад

Thankyou Richard :)

@neilw4881 2 года назад

We are running out of superlatives for you Sir! Class 👍

@BradshawJoinery 2 года назад

Haha 🤣 seem to be getting some good feedback. Cannot thank you enough

@cliveclapham6451 2 года назад

Ottis 😱🎯 the shop dog 👍👍👍 nice job l like to see old stuff repaired and re-purposced give meaning an value in this throw away world. 👍👍👍

@BradshawJoinery 2 года назад

Abso friggin lutley! I say the story of a joiner who's repaired and cared for that old door is worth more than the same time spent making a new one... Imo. It's the story that gives things value. And then having a video of the work being done as well... Priceless? 🤣

@cliveclapham6451 2 года назад

@@BradshawJoinery 🤔🎯🎯🎯🎯🎯🎯

@evedickson2496 2 года назад

Great video, and the "Hot Fuzz" reference was the icing on the cake 😁😁

@BradshawJoinery 2 года назад

Haha Thanks Eve, glad you enjoyed!

@user-fq4qk9wz5k 6 месяцев назад

Great work as usual giving a new lease of life to a classic old panelled pine door u give us lots of tips so it seems fair to reciprocate. To help blend the colourisation of the new pine to the old u can use of all things a tea bag ( I’ve done it many times ) not a soaking wet one a damp one will do it might raise the grain slightly but u can sand it back and u really do have control over the tone with a humble old tea bag not to mention the cuppa whilst working or of course there is the alternative u could call in a french polisher but then the expense creeps up

@bobbg9041 Год назад

I love it he owns a track saw usescit, radial arm saw uses it, really nice panel saw and uses it. Do you know how many shops don't use the panel saw anymore or refuse to use a radial arm saw in the USA. Id use all of them tools and a cnc mill if I had it. You've got a nice shop and looks like doors are your thing. Becuse you've got the tools do make short work of it and do a really good job.

@BradshawJoinery Год назад

Haha no point owning a tool and it not get used! I literally do all sorts, Generally limited by my shop size or if i can handle it on my own lol! Thanks for watching

@raydriver7300 2 года назад

I’ve just found you and already I am a fan. It’s so nice to meet a Brit who makes housing joints and not rabbits. I’m so jealous of your Festool kit. Great job 🌞

@BradshawJoinery 2 года назад

Cheers Ray. Your subscriber 30001 👍😎

@raydriver7300 2 года назад

On the way to 40,000. Best wishes 🌞

@2373stevieb 2 года назад

Easy with the “walkies” Mr Bradshaw please. My Lab thought he was of for a trot around the block at 2:30 this morning when he heard that word mentioned Lol. Great job as always.

@BradshawJoinery 2 года назад

Hahaha brilliant. That made me chuckle!

@jcsrst 2 года назад

As a rot repair specialist it fills my heart with joy to see such a well done job 😊

@BradshawJoinery 2 года назад

Thankyou 🙌🙌🙌

@jimc4731 2 года назад

The lock will be too high?🤫 Keep up the good work! JIM 🤩

@BradshawJoinery 2 года назад

Haha, Balls! Cheers buddy

@daves4026 2 года назад

Awesome video. Would appreciate a video on how to use that saw. It’s same as the one my builders merchant and local B&Q use.

@BradshawJoinery 2 года назад

Thanks Dave, yes a lot of these .odels were in B&Q stores. This came from one, not previous owner but at some point

@Settez123 Год назад

great video. Would love to see a little PU glue for dummies video from you. I've never used it but you sing its praises in a lot of your videos so would be great to see a video on the subject

@BradshawJoinery Год назад

I have been thinking about this. I will endeavour to do one, but time is my enemy currently

@simoncarney9944 2 года назад

Another great job Ollie. Nice to use old timber for the repair, seasoned through age so it’s done it’s shrinking. I can see you’re going to cost me money again with the cutter blades this time! 😂

@BradshawJoinery 2 года назад

Haha cheers again Simon! The blades are good for the money but nowt special. Cheaper on eBay I think... 😉 The very best blades are festool speed max ones. Incredible them!

@TheToolnut 2 года назад

@@BradshawJoinery Top notch craftsmanship Sir 👍🔨🇮🇪 Do you know if those Festool osm blades fit a Bosch osm?

@freebornjohn2687 Год назад

I've got to take the rotten bottom of an old door and replace it with new wood. To avoid it looking like a new board all the way across I'm going to cut a false line into the board to continue down the line where the original joint is.

@BradshawJoinery Год назад

Yeah thatll work!

@bobbg9041 Год назад

After stretching it ya put wood hardener on it so it stays put at its new size.

@BradshawJoinery Год назад

If only that worked with all wood!

@johnpeplow3985 2 года назад

I would never have given it a thought about making the slope in the wood at the joint to stop the rain from running into it. Good job I’m not any good with woodwork.

@BradshawJoinery 2 года назад

Thanks John! Yeah little details like that help, if there was to be movement, it's kind of a failsafe!

@TheHeavyend81 2 месяца назад

No doubt this is going to be an internal door so not likely to have rain on it but I still think the angle cut in makes for a far better professional looking job which somehow makes it look stronger. Great video and a fantastic job. Can you provide a link of the door after it has been waxed and hung.

@DovetailTimberworks 2 года назад

Very nice clean repair, to a good old door that deserved it. Always hard to match color tone with old wood, but I expect some careful die work and you could get it closer. Unfortunately that flashing collar on your pup stole the show on ya!

@BradshawJoinery 2 года назад

Haha! Thought someone might pick up on that! It slows the traffic when they see blue flashing lights 👌🤣

@BradshawJoinery 2 года назад

Yeah I used an antique pine die after and it worked a treat

@garygilbert1526 2 года назад

It would be great to see a video ( if you haven't already made one ?) about your Wadkin crosscut saw .Thank you !

@BradshawJoinery 2 года назад

Cheers Gary, yeah I filmed getting it in place just need to film the dust extraction alterations and then I'll upload it

@andrewclarkehomeimprovement 2 года назад

Incredible. On my current job, I need to repair the bottom of a door where it's been 'fixed' with cardboard and filler! How does YT know what I need to know? Many thanks for sharing in such a timely manner!

@BradshawJoinery 2 года назад

Cheers Andrew! Pleased its helped you out

@anthonyromano8565 2 года назад

Not bad at all.

@BradshawJoinery 2 года назад

Thankyou Anthony!

@asw19B100 2 года назад

We used to call it door more😉

@BradshawJoinery 2 года назад

Haha! 👌

@mauserkk98 2 года назад

Saved another one from the skip .

@BradshawJoinery 2 года назад

Absolutely 👌

@randallthomas5207 2 года назад

For the rail, I think I would have used a dovetail router bit, and set both the interior and top of the edges of both patches to the 14-degree of the router bit. It wouldn’t have occurred to me to do like you did. But it really shouldn’t make a different strength or appearance wise. To widen the style I probably would have made a groove in the bottom of the existing and added a spline. But, again it shouldn’t make much difference in the end. Just a difference of method.

@BradshawJoinery 2 года назад

Yeah could do! I'm cautious of old doors and nails so don't use your best router bit. The problem with dovetail bits is you have to guarantee the height of the router doesn't alter when cutting so easy to get a wobble in the edge. The best way is with the track saw set to the depth then finish with the multitool 👍

@aytonbob Год назад

Great work, why waste a good door.

@BradshawJoinery Год назад

Thankyou Robertt!

@tedwpx123 2 года назад

👍👍

@BradshawJoinery 2 года назад

Cheers Ted 👍

@vanzipper6486 2 года назад

👍

@BradshawJoinery 2 года назад

Cheers van zipper

@dkg30 2 года назад

A great fix and so refreshing to see your commitment to doing a professional job. Can I ask what software you use to produce your drawings?

@BradshawJoinery 2 года назад

Thankyou! I use SketchUp, then use Layout to create the 2d drawings

@Justinofalltrades1 2 года назад

What king of clamps are those? they look really good

@BradshawJoinery 2 года назад

They are really good tbh. T bar clamps 56" ideally you want the Record version but they are frighteningly expensive. Hold God Second hand value though

@user-ex9hc6cn9x 2 года назад

شكراً جزيلاً من أي بلد انت

@BradshawJoinery 2 года назад

Not sure on that one, but thanks

@ChristianChallis Год назад

Thanks for the videos they are amazing they have inspired me to lengthen three doors and the frames. Tech question: what size dominoes did you use on this door 40mmX 8mm or bigger? Many thanks.

@BradshawJoinery Год назад

thats Awesome to hear! I tend to only use 5 x 30 or 10x50. so they are 10 x 50 i think.

@nicklloyd-jones 2 года назад

Nicely done. Are you going to fill the groove that's in the bottom rail?

@BradshawJoinery 2 года назад

Well spotted, it ended up about 7mm deep and there may be a small amount to come off the door so I didn't feel the need to do it! 🥴

@whomadethatsaltysoup 2 года назад

Thanks for sharing this very interesting little project. Excellent work and very clever use of the multitool. Just a quick question regarding the blade you use in the plunge saw to perform the rip cut. I've been using thin kerf 24tpi blades, but have found they just don't last very long, tend to wander, and can leave significant burn marks, especially on hardwood doors. Any advice would be appreciated.

@BradshawJoinery 2 года назад

Tricky one, but the problem namely lies in the blade quality. Rip cutting wants to be alternate bevel with a positive rake, in a 160mm blade 24 teeth is about right but like you I've always found the 24t blades "tinny" to the ear and struggle to get a nice cut. Id try a higher tooth ATB with a thicker plate if you can find it. My HK 85 rips beautifully with a 2.4mm plate blade. Thick blade and plenty of power will solve your issues but most small track saws aren't capable of it unfortunately. They are designed as panel saws with triple chip blades..

@whomadethatsaltysoup 2 года назад

@@BradshawJoinery Thanks for getting back to me! I was using the 36v Makita, but went back to using the 110v corded one. I've got several tracks, and have one set dedicated to the cordless, and the other to the corded. Yes, I'll definitely be avoiding the thin kerf blades going forward. 👍

@megaman2016 5 месяцев назад

Can you put a mortice lock through the middle rail on these types of mortice and tennon doors?

@BradshawJoinery 5 месяцев назад

Ummmm, ideally no, it take one tenon out if necessary, but ideally not both if can be avoided.

@rossmckenzie2283 2 года назад

Nice work, but... why didn't you fill the slot across the new bottom piece as you said you would?

@BradshawJoinery 2 года назад

No I didn't, well spotted 😂, it ended up about 6mm, so I didn't seem it necessary tbh!

@alvintechnology49 2 года назад

Hello friend👍👀

@BradshawJoinery 2 года назад

Hallo!

@davidaldrich3488 2 года назад

Struggling here a little Why not replace the entire bottom piece Repair leftover mortise on both sides or remove the old mortise completely while replacing all of bottom piece If it was to be painted maybe not but I heard you say it was to be a natural finish Ty

@BradshawJoinery 2 года назад

Just not touching the panel areas saves alot of time, and less timber required. Plus the more of the original left the better, I think it doesn't catch your eye as much

@mattcable6379 2 года назад

You arse... I can't fit a single CC in my shop and you've got two! Out interest, how much room behind does the arm stick out? Love the video buddy. And a great tip on the starlock - the bosch ones from Screfix are about over a tenner! M.

@BradshawJoinery 2 года назад

🤣🤣 I'm not rubbing it in, but then new one is absolutely minty.... Without a full restoration your not gonna get better Blades are good, they are cheaper on eBay, I just earn a few pence from Amazon hence the link to there 🤣👍

@mattcable6379 2 года назад

@@BradshawJoinery How far out the back does the arm protrude? I miss my old BRA, but always wanted a CC .

@melvindenny8962 2 года назад

Looks like it was planned that way.

@BradshawJoinery 2 года назад

Cheers Melvin

@tarap5618 Год назад

Could you do similar process if you needed to add to the width? Ex. an interior barn door design

@BradshawJoinery Год назад

Yeah, adding width is easy as it's a straight join allt the way with the grain of the Stiles

@tarap5618 Год назад

@@BradshawJoinery Thank you!!!

@Kapt6911 2 года назад

May i ask what adhesive you are using for the repair that is dispensed in a caucking gun?

@BradshawJoinery 2 года назад

Hi, I've added the links In the description. Wood weld is probably your best bet but the adhesive is called Polyurethane

@johnomahoney565 2 года назад

Nice work! Will you bevel the door for hanging or will that be necessary in your case?

@BradshawJoinery 2 года назад

Yeah I did, use a 2mm packer to one side of the door and EST planer to cut just under 2mm👍

@johnomahoney565 2 года назад

@@BradshawJoinery Ahh cool, thanks for that. Great content on your site, fair play!!

@llamedosr7843 2 года назад

Gotta get myself a festool tracksaw, my evolution doesn't compare. You might say it doesn't cut it

@BradshawJoinery 2 года назад

They are real nice to use. I think the latest model with the thinner blade has sorted out the underpowered nature some didn't like about the ts55. I've always got on well with it

@silverfox8801 2 года назад

Just watched the shipping container episode. What was it for? Just storage?

@BradshawJoinery 2 года назад

It's to store timber about to be used and completed jobs in an acclimated environment before installation. It's made a massive difference to the quality of my finished work after installation I get absolutely minimal movement from the timber.

@silverfox8801 2 года назад

@@BradshawJoinery yeah just saw the other episode. How much did it cost total??

@BradshawJoinery 2 года назад

About £6k I think, £2150 for container, same for insulation then some electrics and the OSB/battens. Would be alot more now 🤣

@keanMechanic 2 года назад

That’s your option on those key blades?

@BradshawJoinery 2 года назад

What's my opinion? Cheap and ok. The Festool blades are actually very good for the price I think so for best work get them. Sthele version is probably the best

@SPMech1 Год назад

👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@BradshawJoinery Год назад

👍

@johnnelson5611 2 года назад

Which PU glue do you use?

@BradshawJoinery 2 года назад

Hi John, this is Wurth but I prefer WoodWeld

@williamcampbell-gray754 2 года назад

Why the wall saw not a sliding table? Is it space or do you prefer them?

@BradshawJoinery 2 года назад

Space was the initial reason but for a lot of jobs it's actually better..! I wouldn't be without it now!

@williamcampbell-gray754 2 года назад

@@BradshawJoinery wow that’s really interesting, I suppose the only major downside is it is not as ergonomic as you are not above the workpiece? You sort of have to bend down a lot? From recently watching your videos though I had no idea how versatile they can be!

@markosborne5510 2 года назад

More walkies and where’s my mask😂

@BradshawJoinery 2 года назад

Haha 🤣 pretty much wallies and meatz is all he obides by

@wallybeep Год назад

I loved this. I am in the States and often travel in the UK. You DO have many shorter doors there. As it happens, a prior owner shortened 8 doors here at my house of comparable vintage. A shame, but I need to correct now that her carpet has been removed. This has been very helpful . Great job, sir!.

@BradshawJoinery Год назад

A Normal door is 1981mm but many older houses have been reworked etc and doors get trimmed down... very old cottages the doors are really low!

@deemauk2591 2 года назад

Got to ask, why didn’t you just shorten the styles a little more and then replace the bottom rail in its entirety?

@jcsrst 2 года назад

If it's not broke don't fix it. Structural integrity.

@jimc4731 2 года назад

Possibly didn't have any old matching wood? JIM

@BradshawJoinery 2 года назад

Having some remaining joint leaves strength in the original door and I don't have to worry about panel grooves etc, I also didn't need wide timber for this repair and s full bottom rail in old pine is hard to find. So in short, it's less work this way, stronger and the materials were available 👍

@koolaid11289 8 месяцев назад

Hi, I have an old door 32 inch x 80 inch) that I want to use in a 36 inch x 81 inch opening. I need to add material to its width and height. I was hoping to poly it to show off the wood rather than painting it to cover the patch. How can I do it so the door looks good after I apply the poly?

@BradshawJoinery 8 месяцев назад

try to keep the grain in the same orientation as it is. i.e dont add a batten on the bottom under the end grain. adding 4" to the width is alot! it may look bulky on the stiles

@koolaid11289 8 месяцев назад

@@BradshawJoinery we had the idea to make a picture frame (miter the corners) around the door. Do you think this would work?

@BradshawJoinery 8 месяцев назад

@@koolaid11289 it will work but may look a little DIY! Mitres will be tricky to make work when fitting the door too. I would keep the Stiles one full length top to bottom whatever you do