Downstream Injector Bypass. How and Why it works 

Best pressure washing channel on RU-vid and that’s a fact

Im brand new to this business, and your videos are Priceless, Thank You

HI Joe, thank you for expanding your reasons for this little set up and for showing how you have achieved what you wanted. Appreciate your time in putting these up. Thanks from Australia downunder.

Just put together my remote ball valve bypass kit and used it today on a job...man is so nice not having to walk back to the truck to turn the bypass valve.. I added a twist to my set up, I have 2 electric ball valves, one is used to turn on/off soap, the other is used to join 2 machines (10gpm) together when I'm ready to rinse..both are controlled off one 4 button long range remote..built the whole thing over the winter...man this thing is sweet!!!

Great video with perfect presentation Joe. You will definitely love the remote bypass.

This is a really good video of the injector bypass thank you for sharing it’s one of the best videos on RU-vid I’ve seen hundreds of videos and no one gets close like you do in your videos keep em coming have a good day thank you!

Thanks so much for the tutorial Joe, def needed it. Your review is well trusted. I just purchased one for my truck!!!

A man and his truck. That is all we really need!

Absolutely amazing content. Your my go to for pressure washing videos. You explain every step of why or why not you do this. I'm going to set my business up with a 5.5 starting up. Thanks

Great video! Very helpful and explained well. I can appreciate the adjustment you made to the bypass you no longer have to wait for the line to clear after soaping. Thank you.

This is exactly what Im looking for thanks joe!!

You're great tutor Joey awesome demonstration..heyyyy ruby🤗🤗🤗

"Joe Deery here, Putnam, Connecticut." It's got the same magic as my favorite TV show as a kid! Love your videos, Joe.

I’m going to run this setup until I get more jobs going and need to be quicker/increase productivity. Then I’m going to the flow pro. Thanks for the tutorial joe!

My flow pro was set up how you made the bypass configuration so I was impressed plus it gives me an extra 8ft of flow on my 8gpm. Love your vids.

THQ for sharing. Curious of you have place where you purchase injectors in bulk, without the quick connect? I really like the mounting block idea with a 3-6' whip. 👍

A personalized one pull baby! Love it! Thanks!!! You know why your videos are so good? Because it's all good info. Not some pitch to buy some course or for you to manage facebook ads behind a little bit of content.Why dont you teach Ruby to turn the bypass?

Good content with great explanation....right on the money

Yeah there is a big difference between a 4 gallon and 5.5 gallon pump when you get full flow from it. Those 13 horse Hondas will always start with one pull as long as the spark plug is gapped right, just remember that when you do maintenance on your engine. Thanks for the video Joe!

The bypasss remote is a game changer. Its a time saver for sure especially on larger homes. Definitely worth the expense

Joe your explaining is first class as is everything you do. I hate owning things and not understanding them you just made me understand it thanks!

This is awesome😎 I will be using this setup this year😀 Restriction is never a good thing😬 I'll buy a shirt🤘🏻

Very impressive on the bypass Joe. Love the lack of kickback when using the 5.5 GPM. Keep sling'n!! 💪💪

Great upload as always .

Well, that looks fantastic. 👌

Hey Joe, Awesome video with great info. Just incase you were not aware, kleenrite has completely stainless injectors for like $30. I have a few months on one already with zero issues.

Great video what type of gun and spray nozzle did use with the injector kit?

Great job Joe! Don’t forget the nothing to crazy t shirt 😎😂

I've made some of these for some of our customers,they really love using them,good thing about working at a pressure washing store is getting stuff at cost 😁😁

Looks great 👍👍👍👍👍👍👍👍👍👍👍👍👍

I'm sold, I think that's the way to go. I'm going to do the same thing except I'm going to go with the remote set up, save time. I built my remote for my soft wash setup, it's not to hard to do. Thanks for the great info. You always have great videos.

I've got the bypass from pressure tek. Works great mounted directly to my pump but the injector doesn't work when I connect the bypass to my cox reel. I don't know why that is but, it works great when mounted to my direct drive pump with 4gpm.

Man you are lucky I always come across some sort of matted leaf mater in gutters that my backpack blower needs to get closer for

Good stuff 👏

How do you stop water from coming out the downstream injector when the ball value is open for straight water flow??

Nice work Joe. I look to you for the info and knowledge. I'm starting this year on my business. Thanks for all the intel.

Did you figure out the Chem draw with the 2.1 injector? All the websites say 2.3 is for 5-8 GPM, but 5.5 is right on the cusp. Have you tried both since filming this video? Thanks!

Confused how the house is plumbed. Did you disconnect the back line from the house reel and connect it to the bypass?

Thatz so cool mate! Can you tell me please what hypo procentage you use for roofs/walls(render) wondering how you guys use hypo, and there is no discolouration. As here in Europe (ireland/uk) we afraid to use hypo for everything... Patio discolouration ,upvc damage and etc....

I’m working on my trailer. Can you send me a link to by that by pass and the injector to a 8 gpm machine? I have my first job next Saturday. Its a big 3 floors house. My soft wash system can’t spray at the top. I will have to use a by pass like you have. Maybe will work. Please help me with that. Thank you very much

Hey Joe, how well is the by pass working with the chem injector mounted to the by pass hose instead of the ball valve. Looking to do the same set up. Thanks for the awesome videos.

great video

Hey Joe Danny Roberts up here in PEI Canada 🇨🇦. Thanks for another great video. Just wondering if you ever thought about moving the bypass to the gun and zip tie the chen line to the pressure hose. Lot of fleet washing guy do it this way and i was thinking on trying it out myself. Also just wondering if you ever have to deal with heavy moss on vinyl and if so do you still use the m5 twist?

You can use an allen wrench to swap out the 2.1 or 2.3 orifice in your injector if you ever need to. Quick and easy.

Joe you said you’re using the suttner easy pull gun. What unloader are you running and which one do you like best?

Hey Joe, thank you for all tips you gave us. Question, did you mix 6 gallons of pure SH with Apple Blosoom for downstream a house wash?

Soap is pretty much soap when house washing. I used to use dawn but decided to try Elemonator definitely like it a little more, Masks the sh smell alot more.

Your almost fully pro bro, get your remote setup and your there... on the money fully kitted out 👍👍💰

💪. Love it. Gonna buy me one now too. Can’t wait to see what that 2.1 strength is gonna give you. Do you have one of those super suds sucker down stream injector? Was thinking of getting one.

Nice video!..I’m going to do the same set up..can you tell me where you purchased the mounting block?..Thanks

I have a 4200 psi 4gpm pressure washer and i ordered one on amazon it says “2.0” instead of “2.1” so im not sure if i would have to lower my psi for it to work properly? Or if i wont even be able to use it. Great video btw i think u explained downstream better than most of the videos ive seen to try to understand it

Love your vids man. Great stuff. I'm curious. With the 2.1 size injector are you just drawing from a straight bleach tank with soap and that gives you 1% or are you mixing bleach, water, and soap and then running it through the bypass?

Do you think I could install one of these to my gun so I would not have to walk back and forth to the truck?

Joe where did you buy the mounting block? Thanks in advance for all the awesome info

Whats the advantage of the injector over just using the venturi effect of low pressure high pressure tips and shutting off the flow of chem without having to walk back to your truck each time?

Look at you and those fancy intros.... lol. I bought my bypass from Pressuretek. Then bought a couple stainless nipples off Amazon and did the conversion. I want to move my unloader off the pump and down to my skid. Need to get the mounting block.

Love that intro

Thanks for making good informative videos 👍... I had a question if you don't mind what size Honda motor is your 5.5 gpm pressure washer? Is it the Honda GX390?

how do you do a draw test?

Wait til you put a remote control servo on the DN 10 ball valve and stop walking back to the truck. They sell them for 300 to 500 bucks, worth every penny.

Hey Joe. If you open\close DN valve everytime you go from water to chem, you don't have to have the ball and spring in the injector, right?

Another great tutorial Joe, thanks, what the wash Dog had for lunch?lol

What tip is that?

So the downstream bypass is used for house washing only? Can you use the downstream bypass method for roof washing or do you recommend the 12 volt pump method? Also, in your opinion, what would be the best source to find chemical mixing techniques ? Thanks from a new guy

US Flag is hanging backwards. Good content, thank you for your time in your schedule.

I bought mine and tested it yesterday. I want to bypass the downstream injector when it is time to surface clean so I can get stronger pressure. I did a draw test with my downstream injector and bypass. With the bypass off and on I filled up my bucket to the 4 gallon mark for both tests. By looking at other videos I saw a difference of the flow rate with the bypass on and off. I was shooting water to measure the distance and the distance is the same for both bypass on and off. I’m using a 4gpm PW. Am I doing something wrong?

Hey Joe does 5% roof mix take off chimney soot or soot from wood burners? Thanks

Do you get that much more flow that it is worth walking back to the truck to turn off rather than just changing tips? i guess thats what you are debating now ?

Hi Joe, when using the Bypass can you use more than 150 ft of hose? I know with just a downstream injector you are limited to 100 or 150 ft hose, so I wasn’t sure if the SH can still be forced with the bypass valve? Thanks

Hey Joe, great video. Where did you purchase the rigid mount thingy for the bypass to mount on the shelf? Thanks in advance

I'm building the same bypass, my question is whats I do with the stock bypass they came on my dewalt 4gpm machine? Is there a way to get rid of it or can I cap it with something?

Joe, I really like the skid you have on your truck. You said earlier that it was a local shop that did it for you and I happen to live in that relative area. Could you tell me the name of the place the did it for you? Thanks

Hey Joe, how are you making your pressure washer have no kick. I have a 5.5 and it’s hard to hold onto it.

Hi Joe, what kind of gun do you use? Enjoy your videos a lot!!

8:12 with this method of not going through your hose reel, do you have to wind off the length you need before connecting? Also disconnecting before reeling it back in? it just seems like the end of the hose would be flopping around doing it this way, is there a solution to that you've found?

Where you order your guns.and down stream injections. Hose.at joe. Thanks for videos

I checked SouthSide equipment for that mounting block i can not find it. Mind posting a link?! If not thanks for the demo ill find something lol

Can you now remove the spring and ball from the downstreamer, now that you have installed a bypass? And never have your downstreamer go bad again?

Good info

So for your annual are you only charging in the Spring or are you splitting the cost between spring and fall?

How do you have fuel line attached to motor ?? Do you have a remote tank ?? Thanks

Where did you buy yours from and price please Joe? I see some places don’t come with injector. Thank w

Hey Joe. You diluting your mix with water or is it just SH and Apple?

Did you ever use a jrod (soap nozzle) to initiate the chem pull?

Hey Joe do you just put straight sh and soap in the downstream tank?

Do you ever get worried going on roofs anything to check for? I would like to start getting on roofs

Flo Pro Solutions! Remote bypass.....no more walking back and forth to your truck!! I set up my bypass/injector the same way you did for the same reason, more water through the DN10!!!

Joe, Where did you buy that mounting block? Thanks, Tom

THE WASH DOG!!!!

how long can you let a direct drive pump run without being on the trigger. I have one right now and im worried with by the time I walk back to the truck and turn the valve then walk back that would be bad for my pump

Smart

Ruby! ❤

Hello, I have a 5.5 gpm 3500psi, where can I get a bypass that will work on my machine?

What's your batch tank have in it when using this set up

@Joe Where did you find that block at?

Hi Joe, do you or anyone else reading this have a link to that mounting block? next will be trying to find one in bsp not npt

Joe - I can't get Russ on the phone and I can't find the brass mount on his website. Is there a part number or specific name to find it?

where did you get your praportioner from?

Did you get 3-5 gpm or 5-8 gpm bypass I'm thinking 5-8 for future upgrade. Thanks Joe always good stuff👍💪

Good stuff. Why don’t you use a jrod?