Тёмный

Dream Touring Bike Build - Thorn Nomad MK3 

Подписаться
Просмотров 7 тыс.
% 182

Montaje paso a paso de una bicicleta de cicloturismo con un cuadro Thorn Nomad MK3 y una horquilla Surly Troll de 26"
Cuadro: Thorn Nomad MK3 talla 55L. Permite ruedas de 26”, 27.5” o 700 de 40mm
Horquilla: Surly Troll Disc/Canti 26". 43 Off-Set. Sin corrección de suspensión. Le cabe una rueda de 26” 3.0 o de 28” y 50 mm
Adaptadores de portabultos: Thorn For Cast End 2 x M5 to 1 x M6. Yo compré otros que no eran buenos :(
Adaptador para pata de cabra: Thorn Dropout Adaptor with Kickstand Mount. Con esto Thorn garantiza que no vas a partir el cuadro por usar una pata de cabra
Pata de cabra: Pletscher ESGE KS18 Comp. Ésta pata aguanta 50 kilos!
Bielas y platos: Shimano SLX Hollowtech 22-32-44
Desviador delantero: Shimano XT de tiro lateral. Con este desviador tienes mayor paso de rueda trasera. Mejor para evitar el barro
Cambio trasero: Shimano XT Shadow. Lo he usado mucho tiempo y sigue funcionando genial
Piñón: Shimano Deore CS-HG400 12-36 de 9 velocidades. Prefiero tener coronas grandes que pequeñas para tener buena cadencia subiendo
Pedalier: Shimano BB-52
Pedales: Shimano Deore PD-M324 con cala y plataforma
Palancas de cambio: Shimano SL-BS77 Dura Ace 9 velocidades. Lo más fiable que existe
Soporte de manillar para las palancas de cambio: Sun Race M96. Para que las palancas de cambio se puedan instalar en el manillar. Lo tuve que comprar por ebay
Manetas de Freno: Avid Speed Dial 7. Simplemente las mejores manetas de freno para vbrake
Freno delantero: TRP Spike mecánico con rotor de 180mm. Buena potencia y fácil ajuste
Freno trasero: V-brake Avid Single Digit 5. Los más simples y que mejor funcionan.
Llanta delantera: Ryde Andra 40 26”. Radios DT Swiss Competition 2.0/1.8. La llanta que todos los cicloturistas recomiendan. Aguanta 180 kilos
Llanta trasera: DT Swiss 535 26”. Radios DT Swiss 2.0. Buena llanta pero a lo mejor es muy floja para cicloturismo pesado. Aguanta 130 kilos
Buje delantero: Dinamo Shutter Precision PD-8. Buena calidad-precio para una dinamo de buje
Buje trasero: Shimano Deore HB-T610. Barato y fiable
Cubiertas: Schwalbe Marathon Mondial 50mm / 2.0 de 26”. Ni un pinchazo desde que las tengo
Guardabarros: SKS Bluemels Schutzblech Set VR+HR
Manillar: Ritchey Classic Flat Handlebar 660mm. Con una curvatura que se supone es mejor para la postura de las manos y muñecas
Puños: Ergon GA3. Con una zona plana para la palma de la mano
Potencia: Btwin 35º. Potencia alta para ir cómodo
Dirección: FSA Orbit MX EC34/28.6 - EC34/30 Headset. Sellada y de buena calidad
Portabultos trasero: Tubus cargo. De cromoly. De los mejores portabultos que hay.
Sillín: Garda Sportourer de gel. Un sillín de Gel cómodo, aunque se me sigue durmiendo la zona perineal.
Tija: Funn Kratos 27.2 sin retroceso. Prefiero que no tengan retroceso.
Luz delantera: Axa 70 Lux Steady Plus con USB. Buena luz aunque la función de carga por usb no es muy potente y mi xiaomi mi A2 lite no se carga bien. Por otro lado funciona genial para cargar 2 pilas AA con un cargador USB que me van genial para mi garmin
Luz trasera: Axa Blueline 50 Steady. Con reflectante y buena luz
Cierres de rueda: Pitlock. Inoxidable y con cierres específicos.
Timbre: Knog Oi Classic Bell. Un timbre pequeño y estiloso
Portabotellas tubo diagonal: OUTPOST Cargo Cage. Quiero llevar botellas de Nalgene con este portabotellas

Спорт

Опубликовано:

 

4 окт 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 72   
@georgeramirez5225
@georgeramirez5225 2 года назад
Nice job on the bike, thorn are good bikes I have a thorn also I have thorn Raven. Love my bike and I also built it enjoy it for years to come, be safe.
@ГеннадийРутковский
@ГеннадийРутковский 6 месяцев назад
Великолепная работа и шикарный велик катаю уже 70 лет и сейчас тихо завидую тебе и поздравляю с таким замечательным проектом --- БРАВО ,
@ebuqble33
@ebuqble33 3 года назад
Thanks for subtitles ❤️
@delboy868
@delboy868 3 года назад
I built my own touring bike in 2012 it was a Santos travel master with shimano xt and to this day it hasn't missed a beat and I really enjoyed building it, I really enjoyed watching your build well done it's a sweet bike
@biketouringaddict
@biketouringaddict 3 года назад
Thank you for your comment. It's very satisfying to build your bike exactly as you want. You built a very good bike too. I hope to do a lot of km with "mi burra" sooner than later
@claudiovecchiatto3260
@claudiovecchiatto3260 Год назад
I had a travel master alu 26 inch also (for a short period of time). Never toured with it unfortunately but the food shopping errands never seemed so stable with the panniers full 😁 what a great bike. I wonder how this Nomad is to ride in comparison. The frame stiffness of the Santos was great and the guy I sold the bike to is enjoying it a lot. Small wheels are fun unloaded and stable when loaded. Not same momentum of big size wheels tho.
@nivologo
@nivologo Год назад
Espectacular máquina 🚲🚲🚲🚳
@theconstantcyclist8318
@theconstantcyclist8318 3 года назад
Great when everything just works 👍 very relaxing and therapeutic video to watch
@rodarezekisepeda
@rodarezekisepeda 3 года назад
Nice bicycle and nice review..salam from Indonesian..
@konstantinosmargaronis6205
@konstantinosmargaronis6205 3 года назад
Tengo también un cuadro de Inglaterra, Oxford bike works, modelo expedición. A mí también me encanta elegir componentes y poner los. Buenos viajes.
@biketouringaddict
@biketouringaddict 3 года назад
Muy buen cuadro. Me suena de haber visto un artículo de alguien que se lo monta desde cero también con esa marca
@clappedoutmotor
@clappedoutmotor 3 года назад
I think you have made my dream bike
@paulmckearney4945
@paulmckearney4945 2 года назад
Nice job. Interesting that Thorn's standard build would have a disc brake at the rear and a V-brake up front. I'm sure the bike stops just fine as it is! Happy cycling.
@biketouringaddict
@biketouringaddict 2 года назад
You can use vbrake or discs at the rear. The truth is, a good avid vbrake it's more than enough to stop the bike.
@superlillone1976
@superlillone1976 3 года назад
very inspirational video and beautiful bike! I like the video format where you show the steps in the process, very educational
@biketouringaddict
@biketouringaddict 3 года назад
Thanks! I like to build bikes and I thought it would be fun to record all the process.
@tomcatt998
@tomcatt998 3 года назад
Love them fenders,, plenty of clearance & looks like you have room left so yer toe missed the front fender on turns,, my touring bicycle (Windsor Tourist) don't give me much room & i don't have big feet 👍👍 good job 👍👍
@biketouringaddict
@biketouringaddict 3 года назад
It's one benefit of 26" wheels. Plenty of clearance
@tomcatt998
@tomcatt998 3 года назад
@@biketouringaddict 👍👍👍
@jaimemaciaspe
@jaimemaciaspe 4 года назад
Buen trabajo, Te ha quedado de lujo!!
@biketouringaddict
@biketouringaddict 3 года назад
Gracias, espero que me acompañe en un montón de aventuras
@JoseTorrijos
@JoseTorrijos 4 года назад
Magnífico, espero que la disfrutes Gracias por enseñarlo
@biketouringaddict
@biketouringaddict 3 года назад
Eso es lo que me falta, disfrutarla. A ver si el 2021 se porta bien y podemos salir a ver mundo. Al menos en las vacaciones
@ourclarioncall
@ourclarioncall 3 года назад
Great video 👍 👍
@biketouringaddict
@biketouringaddict 3 года назад
Thanks!
@erm238
@erm238 4 года назад
Buena maquina y buen trabajo, a disfrutarla muchos kilómetros..
@biketouringaddict
@biketouringaddict 3 года назад
Eso es lo que me pide la bici. Devorar kilómetros!
@laurentberger69100
@laurentberger69100 3 года назад
Very good job. It would be amazing if you could list the parts assembled nd tools used for this touring bike. Bravo!
@biketouringaddict
@biketouringaddict 3 года назад
You have all the components listed here: www.rodadas.net/foro/topic/dando-vida-a-un-cuadro-thorn-nomad-mk3
@CassioRabuske
@CassioRabuske 3 года назад
Muito boa a edição! Bela bike!
@t.v.5677
@t.v.5677 4 года назад
Eres un crack Dani!
@biketouringaddict
@biketouringaddict 3 года назад
Gràcies. Encara em falta utilitzar el tensor de radios jejeje
@t.v.5677
@t.v.5677 3 года назад
@@biketouringaddict Dani, les rodes de 26 li'l senten de maravilla i són més fortes per a viatjar. Això ja ho saps tú.
@tacostwowheels4934
@tacostwowheels4934 4 года назад
Looks good!
@biketouringaddict
@biketouringaddict 3 года назад
At least it doesn't fell apart XD
@claudiovecchiatto3260
@claudiovecchiatto3260 Год назад
Very relaxing video. I agree with you about the bike building process being a form of creativity and fun. I personally love doing this things also. The bike looks great, I also like the cyclingabout content and saw the article Alee wrote about the Nomad MK3. I used to have a Thorn, I think early 2000s, a Club Tour in light blue color. It was great as a light tourer, the paint very durable (based on my research it was powder coated with some clear coat on top). Now apparently they use a paint called imron.. I wonder if it's also good and scratch resistant. What's your experience about the paint in your bike? By the way I love it! I remember a review about this bike joking about the color because it reminds the postman color here in England 😁 I personally would build it with 27.5" wheels to carry more momentum while riding. I think you would save some energy in the long run. And 27.5" are available apparently even in remote places nowadays (not that I know it for sure or experience, just what people say in the internet). Are you planning to change your 26s to 27.5s? I had a Santos Travel Master 26er and love the combination of stability given by frame stiffness, long chainstays and small wheels, but at the same time I think that wide 27.5" wheels are just perfect as closer to 26er than 29er in diameter and feeling. Best of both worlds for me. Also I would have loved to see a proper kickstand attachment on the chainstays and not through an adapter.. I read bad things about that adapter snapping while using it with loaded panniers. Did it hold up to you?
@biketouringaddict
@biketouringaddict Год назад
About the paint, I have had a scratch due to a rock hitting the frame, but the black coating they use as primer is very nice, because it didn't revealed the raw steel. By the way, I love the red color. I don't care anymore about wheel sizes. It's a nonsense in my opinion because we travel slowly and with a lot of weight, so it doesn't matter if you arrive 20' later. 26" is way stronger and it gives me confidence. I am a bit old fashioned about wheel sizes. And with the kickstand, no problem whatsoever. One thing I dislike is about the position of the bolts where the kickstand ataches, because I must use it in the largest position available to have the bike in the most straight position. I consider the problems with the kickstand that people have, are caused by having the bike pretty much reclined. Both the kickstand and the chainstays suffer a lot if the bike is not standing in a straight position
@claudiovecchiatto3260
@claudiovecchiatto3260 Год назад
@@biketouringaddict good to know about the paint, and understand you point about the wheel size, even so I truly think that a wheel well built with strong rims and the right count of spokes can be strong even 29er and not only for speed intended as going same pace as you do at the moment while saving energy with the big wheels but also more comfort off road with wheels that are still strong but flex more and can go over obstacles with better angle of attack.Saying that I cannot stop myself checking sjs website for a frame to build with 26inch wheels because I do not need more than that for the trails around here 😎 just love the look of a steel frame and the feel also. Happy miles with your beauty
@haikureel
@haikureel 3 года назад
What type of fork did you purchase for the Nomad, and what size is your frame? Excellent work, very educational and helpful.
@biketouringaddict
@biketouringaddict 3 года назад
The fork is a Surly Troll of 26". it is 420mm from axle to crown and with an offset of 43mm. It fits quite well with the same specifications of the original nomad fork: 410mm / 48mm Surly Troll fork specs: surlybikes.com/parts/troll_fork Nomad fork specs: www.sjscycles.co.uk/forks/48-offset-a-650b-26-inch-thorn-nomad-mk3-steel-fork-red-imron/?geoc=ES The frame's size is 55L and I am 175mm tall. I think it is the right length for me
@haikureel
@haikureel 3 года назад
@@biketouringaddict Thanks for this information, I will try and get this fork for my thorn frame, great build, thanks for the advice.
@kvbcycles
@kvbcycles 3 года назад
Gran video. Creo que hay dos nómadas en España, ¡el tuyo y el mío! :)
@biketouringaddict
@biketouringaddict 3 года назад
Tengo unas ganas tremendas de irme de aventuras con ella. He visto tus vídeos de Portugal y Melilla. Muy chulos. ¿Me pareció escuchar que quieres ir a Sudáfrica? ¿Por donde andas ahora?
@kvbcycles
@kvbcycles 3 года назад
@@biketouringaddict Gracias, y sí, escuchaste bien, quiero pedalear a Sudáfrica, así que de momento, estoy en Melilla, esperando ...
@AlbertoFL
@AlbertoFL 4 года назад
Gran trabajo!! Yo soy incapaz de montarla asi desde cero con lo que se . Lo único que cambiaria quizás seria los 3 platos intentaría poner un monoplato, como mucho dos y una buena piñonera, las hay ya de 52 dientes, lo habras visto en MTB, aunque desconozco su uso en 26" y si es igual de efectivo que en 29". Al final se queda un sistema mas simple quitando posibles fallos del desviador, ahorra peso y sencillo con un solo mando. Supongo que cambiar a freno de disco en la rueda de atras cuando cambies la rueda algun dia seria otro cambio
@biketouringaddict
@biketouringaddict 4 года назад
El freno de disco trasero lo tengo pendiente, pero he de cambiar la rueda. El 1x12 está guay pero no lo veo claro para cicloturismo. Con tantos km's y la cadena tan cruzada, se acelera el desgaste. Además de que tienes marchas un poco más largas con un 3x9 por ejemplo
@AlbertoFL
@AlbertoFL 4 года назад
@@biketouringaddict Creo que cubre todo el rango de 3 platos eligiendo bien el plato y piñones aún así tampoco se como afecta a ruedas de 26, que seguro que es diferente a 29
@jeffv.akaonsjeffke9865
@jeffv.akaonsjeffke9865 2 года назад
El 3x9 es perfectamente valido en cicloturismo, mejor opcion que 1x12. Una tourer no es una mtb. Una mtb pesa de 11 a 15 kg, una tourer cargada llega a pesar 40kg y realmente vas a aprovechar ese plato de 22 o 24 dientes. Con un 1x12 tendrias que reducir mucho el plato para poder subir las cuestas con carga, y te faltaria velocidad en recta llana. 3x9 perfecto !!!!
@chrispictures1
@chrispictures1 3 года назад
Great video but that front dereilleur cable is rediculous especially for touring,,,,its asking for trouble
@biketouringaddict
@biketouringaddict 3 года назад
What trouble? It's ideal indeed
@petesig93
@petesig93 2 года назад
Why fit a rear V-brake when you have perfectly good disc tabs? And why fit a derailleur drivetrain to a dedicated Rohloff frame like the Thorn Nomad ?? That kickstand mount for the Pletscher 2-bolt stand is unusual but pretty cool.
@biketouringaddict
@biketouringaddict 2 года назад
I fitted a rear V-brake because I didn't have the rotor and the caliper available at that time. The same for the rohloff. But right now I have the two things installed. I want to make a review of the new changes soon, when I can do a long bicycle tour. I am a fan of the kickstand. The only drawback is that it's installed too high with the thorn's adapter, but it gives safety to the integrity of the frame
@petesig93
@petesig93 2 года назад
@@biketouringaddict ah, OK. That explains it all. I have the Pletscher Multizoom clamp-on kickstand and have had no concerns at all for the frame's integrity. I did break the stand after 2 years when loading the panniers on a heavily-loaded desert tour. But the replacement has worked without fail for nearly 10 years now.
@biketouringaddict
@biketouringaddict 2 года назад
@@petesig93 Well, that could be luck or that you take a good care of your bike. But it's well documented, the problems you can have with kickstands clamped to the frame triangle. You can read it in the Thorn's brochure at page 13. www.sjscycles.com/thornpdf/thorn_mega_brochure.pdf If the manufacturer says it...
@fernandoespinosabenayas255
@fernandoespinosabenayas255 2 года назад
Gracias por compartirlo, una pregunta: sabes como funciona el tallaje de esos cuadros , estuve mirando una web....y o soy muy torpe o no me entero de como tallan?? Gracias
@biketouringaddict
@biketouringaddict 2 года назад
en este enlace, www.sjscycles.com/thornpdf/thorn_mega_brochure.pdf, tienes en la página 29, el tallaje de estos cuadros Te recomiendo leer el pdf entero. Te da una idea del cariño con el que están diseñados estos cuadros
@fernandoespinosabenayas255
@fernandoespinosabenayas255 2 года назад
@@biketouringaddict muchas gracias
@ibiniohalduno
@ibiniohalduno Год назад
Que intetesante este video. Tambien estoy entusiasmado en comprar una Thorn para viajar. Veo que has elegido "flat bar" en lugar de "drop bar". Como es eso? Gracias amigo.
@biketouringaddict
@biketouringaddict Год назад
En mi caso, no entiendo como la gente elige manillares de carretera para viajes largos. Prefiero los planos, porque me dan mayor control y maniobrabilidad.
@ibiniohalduno
@ibiniohalduno Год назад
@@biketouringaddict lo tendre en cuenta. Gracias. Otra cosa, como es que has puesto disco de freno adelante y v-brake detras? Y el disco es de freno hidraulico, mecanico o combinado? Y como comprastes el cuadro, por internet? Gracias
@biketouringaddict
@biketouringaddict Год назад
Puse vbrake trasero porque la rueda que tenía no estaba preparada para disco. El freno de disco es mecánico y el cuadro lo compré por internet, aunque ahora vale 300$ más que entonces a través de sjscycles
@ibiniohalduno
@ibiniohalduno Год назад
@@biketouringaddict muchas gracias. Ahora lo entiendo. Mirare como comprarlo. Un amigo se compro el cuadro del modelo audax de thorn y en una tienda le montaron su bici para marchas brevets y es tambien una maravilla de bici. Gracias y muchos kilometros
@MrBolaextra
@MrBolaextra 2 года назад
Muy bien vídeo y muy bonita la bici!! ¿Se puede preguntar cuánto te costó el cuadro? Me estoy pensando montar una bici para cicloturismo yo también desde cero, pero me echa para atrás el precio de los componentes y todo lo relacionado con las bicis ahora mismo, que está disparado... Por cierto, muy curiosa esa combinación de freno de disco delante y freno de zapata detrás, nunca la había visto.
@biketouringaddict
@biketouringaddict 2 года назад
Yo la compré en esta página: www.sjscycles.co.uk/thorn-nomad-frames/?geoc=ES Ahí tienes los precios de los modelos. Por el precio de los componentes, si no tienes prisa y estás al tanto, puedes conseguir buenas ofertas
@alanchapter440
@alanchapter440 Год назад
Hi, how tall are you and what is your standover height? I'm trying to decide what size to buy for myself. TIA
@biketouringaddict
@biketouringaddict Год назад
I am 175cm tall and my frame is the 55L version and it's a bit long for me. I should have chosen the 52L
@weiwei1808
@weiwei1808 2 года назад
Good
@lmhr9
@lmhr9 2 года назад
how is the bike? still holding up ok?
@biketouringaddict
@biketouringaddict 2 года назад
Yes, I did some changes to the transmission and installed a rear disc brake. But the rest is the same. It's a nice bike
@rubenruizdeurrafernandez2430
@rubenruizdeurrafernandez2430 9 месяцев назад
Hola, donde compraste el cuadro y la horquilla?
@biketouringaddict
@biketouringaddict 9 месяцев назад
El cuadro en www.sjscycles.co.uk La horquilla creo que fue en bike-components.de
@rubenruizdeurrafernandez2430
@rubenruizdeurrafernandez2430 9 месяцев назад
@@biketouringaddict muchas gracias
Далее
Katta janjal
00:29
Просмотров 185 тыс.
Azizbek Temirov otasi nima deganini aytdi
0:49
Просмотров 359 тыс.