@@InfinityDrones Well now that I know it works with Mavic 3 can I just the DJI goggles with this hack?, Update: I went to the website and it says you can only get FCC boost with Mavic 3 I am now sad| Update 2: I looked at the wrong drone it does actually work with the Mavic 3 I happy now :>
Hello. I have one DJI Air 2S and i want to mod it.. i'm tired to ask dji to let me fly MY DRONE higher than 500 M. I don't want to fly over 500 M to make bad things.. but if i go to mountain there are so many situation that 120M or 500M height limit it's not enough. Can you please tell me if i buy this hack, i will lose RTH or Auto Landing or what i will lose if i flash this firmware ( what functions i will lose if i flash this firmware ) Sorry my english is not very good.. Thank you!
Everything will work as per normal - You can look at the later firmware release note to see what you're "missing", but honestly there is no feature that you'll loose since the Air 2S has been out for quite some time and dji only released firmware to block mods. This mod is amazing and you'll love it.
I'm in South Africa... Follow the video - the mod is really easy to do. My latest video for the Phantom 4 shows the exact same process you'll follow for your inspire.
Thanks for the video!! I’ve a question.. what happen to my drone hack package if I change controller of my hacked drone?? Am I going to loose the hack?
This is amazing! Thanks man. What is all this about people saying the Mavic 3 Pro having less reach and more unstable connection due to the controller having no antennas?
I had issues getting the drivers to install using Windows 11 via Parallels. I had to use a native Windows booted computer. After hacking, I noticed that auto-landing when close to the ground is also turned off. Is there a guide or Wiki for setting parameters?
Hi there. Did you use the cinemode option to disable the gps? Of so it's recommended that you flow close to the ground and switch back to Normal mode so the sensors get activated again
@@InfinityDrones Thanks, I did. They created a new help page indicating that Windows 11 ARM is not supported. It needs to be an Intel/AMD based Windows installation. As for disabling the ATTI/Cine mode, they're not helping with that which is very disappointing.
When I select my 1200 firmware it won't allow me to buy a licence, it says downgrade but In their site it says it's supported ?Ok got it sorted and everything seemed to go ok 👌
hi there, you just need to buy a license. When you open the dronehacks you just need to follow the steps as it will auto link the license and then prompt you to download the downgrade firmware. Let me know if you get stuck. But you just need to buy a license (does not matter which firmware you select)
Thanks for the video, Today I also hacked my mavic 3 and it works perfectly. Only my goggles 2 still shows 50 mbps. And at 1500 meters 20 to 30 mbps. is that normal? or how can I see that my goggels 2 now also works better
Hi, congratulations on the work you are doing, I would like to ask you a question, I have a mavic 3 Classic, drone firmware 01.00.06000 and the radio control firmware 01.03.1400, is it compatible with your software, I would be interested in having the flight mode in FCC. Thanks and congratulations again. Simone
Sadly the Mavic 3 Classic is not supported. Only the Mavic 3 and Mavic 3 Cine is currently supported. But check out my latest dronehacks video since the new owners of Dronehacks have enabled fcc mode via the Dronehacks companion app for android.
Hello! Installed DH, everything is ok. Question about the remote control firmware, currently the remote control firmware is 03.01.0800, DJI Fly 1.6.6. Do I need to update my remote and app?
Your videos are great, I have a question about Air 3, drone firmware is 01.00.1000 and RC is 01.00.0600, can the aeroscope see the remote controller location live and if so, is there a way to hack that?
@@InfinityDrones I read that controller (thus the operator) location is only seen if the phone has GPS on, I'm guessing that was wrong info 😕 I don't mind the drone live location and home point as much as operator live location, I'm from Georgia, borders Russia, I might be needing to use this with not so civilian purpose if Russia decides something, I very much need not to be tracked. Thank you for the reply, I'll keep an eye out for the latest hacks
Forgot - Does the “Atti” mode get enabled with a switch flip to “C” instead of “N” or “S”? When flying the Mavic-3 with an RC-Pro, the “C” switch position now indicates “N” and it won’t go into “Atti”. Thanks!
Any idea if the Mavic 3 Pro Cine will be unlocked? I'm wondering if you unlock the Mavic 3 Pro, if the Cine version would use the same basic process? The Pro Cine would be a great unlock for filmmakers.
At approximately 11:20 p, you indicate that if the drone (in our case - Mavic-3 and Air-2s) hits an NFZ on its way back to you, it “hits a wall”. In the discussion, you mentioned the India altitude restrictions . I’m a bit confused. Does the NFZ “wall” apply to drones in the USA? Our big fear is that one of our drone operators will fly into an NFZ and lose it if the drone cannot pass through again. Does anyone have any further info.? Thank you !
The NFZ (No Fly Zones) you can check in your dji fly app's map. It applies to all around the world. In india they have an aditional law that prevents drones from going higher than 15m.
I got it loaded but when i tried it out... I don't have sensors anymore... Landing is a bit weird as well. When I move to ATTI mode with cine position It shows a battery low warning.
Yes, Check ou the dronehacks website (its in the video too) but there are things you can do to make coming out of Atti mode better. Check the section under NFZ: drone-hacks.com/m3-custom-fc
@@InfinityDrones I don't have any sensors not just in atti mode. I can fly directly at anything and it will not give the normal warning. The drone is in normal mode.
@@RandomSynr that is very weird. I would recommend you update to official firmware and then do the mod again. Just to rule a few variables out. If you still have an issue please let me know.
I tried my done out yesterday (version 1000) and when i move the right stick the drone goes 15ft then stops and wont go any further !.I switched off the sensors and it works ok must be a bug in the hack?.I might try the other version of the hack .I ony really wanted fcc mode but its handy that i can turn on and off fcc, leds ect .
@@saltire546 why did you do 1000 and not 1100 if I may ask? If you can't go more than 15ft I think its because you're not logged in to your dji account. So log out and log back in again
Good evening I cracked the drone using your software except that my computer no longer recognizes the drone nor the dh application the drone displays black camera on the DJI Fly application and the update is always at .1300 but I can write things on the drone name to modify
Hi there, I would say try with the latest version of Dronehacks and make sure you have DJI assitant 2 for consumer drones and the dronehacks driver installed.
hi bro i have the mavic 3 but it dident work to downgrade from 1100 to 1000. i tryed to download via the link the 1000 version but at the DH app it show this when i import the downgrade file: Info: Fw has lower Antirollback value as drone. Please check the birdmap is a downgrade would be possible with a license.
Hello, i have bought a mini 3 with rcn1 normal controller, i wanted to get licence but only mini 3 pro is showing on roadmap and not mini 3 :( Can someone help ? I couldn't fin any contact email on that website either
The mini 3 and 4 onky has the fcc mod. So no nfz removal or altitude removal
5 месяцев назад
CustomFC install failed please remove the battry from the deone and re-instsert. İt bedore connectting the drone again. It gives this error while doing nfz..
@@joshmontanez2239 new drone or has the drone been used? I would hook up toe dji assistant 2 for consumer drones and check that everything is activated
I bought the .1000 for my Mavic 3 and I got all the way to the step of connecting the drone to the computer...the application couldn't detect my drone?? Waste of money for me. Would be great if I could get help with this so I didnt waste $50 :(
Hi there, dis you follow all the steps? Do you have the Dronehacks driver installed and dji assistant 2 for consumer drones installed? Remember, dji assistant 2 for consumer drones must be closed otherwise dronehacks won't be able to detect it
I am using your hack well. After watching this video, I purchased the Mavic 3 Hack. I would like to ask another favor. I would also like to purchase the Mavic 3 Pro and RC Pro Controller if they are released with the latest firmware. Thank you for always.
@@InfinityDronesno sweat thank you. I can just sell my cine mavic 3 for a non cine version. I hope it will -allow us to turn off the lights for stealth flights -able to turn off drone ID number for our safety -able to increase horizonal speed -able to remove NFZ restriction😊
@@AleXtazee Issue is not the RC... but id does make it easier to spot. Remember the Mini 3 uses the same RC as air 2, mini 2 and now mavic 3 and cannot be unlocked. The way to unlock drones is via the firmware on the drone, the controllers dont' have anything to do with it as the drone tells the controller what it can't and cannot do. (hence you request unlock certs via the app for example)
@@InfinityDrones sure, of course. It's not about the RC per se, I meant, from what I understood, each new RC model represent the next generation of drones, the transmission system.etc.. Like
hi, love your videos. i was able to hack 2 of my FPV thanks to your previous video. When i saw this vid a month ago i went and bought myself a mavic 3, not the cine, pro, or classic. just the regular mavic 3. my issue is that the mavic 3 wont connect to the software. it easily recognized both my previously hacked drones no problem, but when i connect the USB to the computer and drone it just say "Info: searching for device.." the mavic 3, when connected pops up as "internal storage(D)" on file explorer im not a computer wizard.. all youtube and learned alot from you. hope you can help me with this weird issue or someone thanks.
Yes i do, the software 1.39v recognizes both my DJI fpv drones. But with the mavic 3, nothing. Should i uninstall and reinstall the DJI assistant 2 provided in the link? It’s very odd because i followed step by step on previous video, worked flawless. But this first part a little frustrating
@@InfinityDrones actually the fleet has been drastically reduced,I’ve pretty much sold everything I have apart from dji FPV and 1 plane with a 03,and putting the money into a motorcycle,it’s been a tuff decision but I’m going to try this approach for a year and see how I feel then,I allowed things to quickly get on top of me with loads of projects and it became a hassle,so when the uk weather decided it wanted to play the game!,I then wasn’t in the mood,it was a tough year last year so I’m hoping with less stress and hassle I get out and fly more
@@wastedworldexploration2842 I completely understand that. It was a tough year. My wish for you is just to be able to enjoy flying and when you get a chance to fly.
@@InfinityDrones Well, I did it. Perfect tutorial by the way. I installed the prehacked FW, however if I use fcc_on or fcc_off and modify in "name", the FW says modified, however the drone always stays in FCC mode. Did you have similar experience? Thanks! :)
Yeah, me too! But I know its at the very least 6-12 months away... Try not to update your firmware okay, dji is sneaky and puts locks in place that prevents hacking.
Honestly, the amount of good is WAAAY more than what you're suggesting. Read the comments and you'll see how many search and recue guys have commented etc. If you are really that worried about "invading the airport" then I hope you know that DJI is the only company that has NFZ. IF someone wanted to invadte the airport they could use a super easy and cheap custom fpv drone, any cheap gps drone thats being sold like JJRC Bugs etc. Hell, they could even use any non DJI drone... Point is, if someone wants to do harm there are MANY MANY better, easier and cost effective ways to do it than using a dji drone.
Stolen is a very strong word to use without any proof. I have it in good authority that the Dronehacks devs are in communication with the author and there are not issues.
@@InfinityDronestrust me, they either stole or hacked the 1001 firmware that was made by the group called Russian hackers for the Russian army now for the war.
Hey mate I love your videos can I please get a free drone hacks license I really love your videos and I have subscribed and I want to set my drone free.
I have shown DJI all the proof and that I have been permitted and authorised to fly in some No Fly Zones legally, yet I still have to wait, show my details, licenses etc just to get them to permit the zone, sometimes it’s taken 2 days to get them to remove the block, I have installed on my other drones the drone-hacks mod and now finally I can do my Mavic 3 you have no idea how much of a relief this is . Brilliant work guys for some5hing that DJI should give us. I do like vision assist and have used it a few times here and there but I can live without it for the benefit of not having to ask them to allow me to fly legally.
Many public safety agencies are running into the same issues. We have several heavily wooded areas and multiple lakes in our response area that are frequent locations for search & rescue operations. They are marked as being within restricted areas on DJI’s maps -BUT- the entire area is verified as being free and clear of any restrictions, yet DJI seems to think it’s adjacent to an airport when the airport is physically over 20 miles away. Despite the program DJI launched a few years ago, where they issue a special license that removes all NFZ and other restrictions…. It is nearly impossible for our small volunteer fire department / rescue squad to obtain assistance from DJI. They seem to only have this available for the enterprise series drones. Due to the much lower cost for the Mavic-3, our limited budget organization has chosen these. So… Thank you! This seems like a perfect solution.
@@PowderMill so happy this helps you! Thank you very much for your detailed comment. I hope others will read this and realize ithat removing nfz can really help a lot of people.
@@InfinityDrones The mavic 3 v2.0 is a version of the mavic 3 with a c1 certification. The drone-hacks support said it should work because it's the same hardware.
I did the HACK and for me it's horrible having to keep clicking every time the 90 second screen appears. but it is a solution. I prefer to use the license myself.
I understand completely. Atm this is the onky way to get the nfz removal. You can still apply the normal way vI dji flysafe website for an unlocking licence
No it will not.. you must activate the drone via dji consumer drones when you get it. Also, possible stolen drones are blacklisted and then the activation error occurs.
34:05 I think there’s a huge issue with this counter while failsafe lose connection, RTH will not work and you could lose the drone. Since you live in a restricted area zone and you’re getting this counter, can you help test it? When there’s drone and RC connection, the counter just keeps resetting itself and starts over and it’s not an issue, just pretty annoying. However, the problem comes to play when a failsafe (lose connection) occurs and that counter is counting down. If you have the setting set to RTH at signal lost, does the drone fly back to its home point as it should, or what does it do?
I've tested this, the counter is ignored by the drone. It's the DJI fly app that displays all the normal info and will show all the warning (which is a good thing since the pilot should know they are in a restricted zone). But like I said, the drone will ignore all the warnings/limitations :)
@@InfinityDroneshave u tested it when a failsafe occurs though? DJI has this thing, that if you're inside or near a GEOzone, RTH will not work and I suspect that’s what’s going on here.
@@rubengarciajr7560 Yes sir, I've tested all the scenarios. RTH is one of the biggest reasons I did the unlock in the first place. This means if there is a NFZ the drone will fly through it to get home and not get stuck on an imaginary wall (nfz)
Really sorry to hear... that is a big issue that DJI has... they do not allow you to calibrate the sensors on any drone newer than the Mavic 3 (Mini 4 pro, Air 3 and all of the Mavic 3 series)... Sadly you'll need to send it in for repair.
thanks for the video. I downloaded everything and linked the license to the drone and downloaded the file 1000 as in the drone hacks mavic 3 website. Dji assistant is installed and drivers installed also. any idea why the choose firmware button is grayed out and wont allow me to select a firmware to flash. appreciate the help
Great Video! I only have one question. When at the end the drone says that you have 100 seconds till auto landing, is that possible to somehow change that 100 second to something like 500 seconds? Thank for answearing.
Thanks for answear, but my problem is that I have an Air 3, and i somehow managed to get that autolanding when entering a 500 meter altitude zone, and when i enter the drone says that i have 100 second till auto landing, in that 100 seconds i can change that max altitude to whatever i want, but the time is just not enough to reach some serious height. So if you could help me to somehow change that 100 seconds to 500 second in the code I would be very thankful.
@@ElodVass_ Instagram probably. But I can tel you know that anything geofencing related will not be something you can change in parameters. That's locked out completely. Best bet is to sell the air 3 and get a mavic 3 and unlock it as per the video.
Be careful when you switch to "cine" mode, you will be in atti mode and risk losing your drone. I think that this feature should be optional like "drone id" and "air sense" also.
@@InfinityDrones DJI RC Motion 2 I tested that the rocker does not seem to support double-click unlocking. Does DJI RC Motion 1 support it? I updated version 1100.
@@Nayzf450 So you bought a license and you did downgrade to the lower firmware version? Just need to be sure that you drone is the Mavic 3 (not the Pro or the Classic)
My drone is a Mavic 3T. Sometimes when the GPS signal is lost, the drone switches to Atti mode and automatically loses altitude. Is there a way to prevent it from losing altitude?
As a practical solution, I try to keep my drone stable in the air, until it goes to Atti Mode, then I raise it to the altitude I want, sometimes it descends so much that its altitude falls to minus points relative to the house.
I understand you, but especially this drone has such a problem. For example, I used both other Mavic 3 series, they did not have such a problem, of course they were swinging left and right, but they did not lose their altitude.
with the prehacked .1100 in Europe Remote ID is sending, with the prehacked .1000 RID is not sending. So not only the flashing rear LEDs is the difference between both.
I can confirm that .1100 is sending drone ID info. Just checked with 2 different applications and they both pick up the drone and give all the information back to the apps.
@@whitedynamite1555 thank you for the update. Please log a ticket with dronehacks, I'll do the same. Lets work together to get all the info we can from them.
I’m flashed to .1000 and it works as it should. I’m going to flash back to .1100 and see if I get any different results. Drone Hacks support says both firmwares should have the same results in regard to remote ID blocking. I’ll report back after some tests. Also, if you do not want ATTI mode, you can send command gps_on, and you’ll have Cine mode back with GPS hold.
@InfinityDrones ok I'm on 0104, it keeps failing and I don't see any options to turn off or on the height or geo restrictions and ive linked my license, it just keeps telling me it can't download the files from dh
@RESISTAGE drone hacks did all the drones before the mavic 3. Russian hackers did mavic 3, mavic 3 pro, mavic 3e, mavic3t and matrice 30(t) with their 1001 firmware. Then the mavic 3 firware got leaked or stolen and thats what drone hacks is selling now, the first version of that hacked firmware, what proves it is exactly the same fuctionality, everything. but the russian hackers one is much more advanced, as it is a much later version, it has even more features as it has evolved with releases. and as only the mavic 3 version got leaked or stolen thats why drone hacks only has mavic 3 and not all the other mavic 3 pro,e,t. But the russian hackers have modded firmware for all the mavic 3s and matrice 30(t) @RESISTAGE
Well, I cannot comment on anything that you mentioned here. But if you can get the Russian versions I would love to make a video so that everyone can get the benefit!