Dropping Single Cab 4/7 on 24" Intro Billet Wheels Drop Kit Installation 

Wow thats a huge difference. Went from an old run of the mill stock truck to straight badass truck now..

How much y’all wanna bet the next mods are stickers that say “si quema cuhh!” and a flow master exhaust 😂

That really set off the truck. Looks way better! Those new wheels are sick AF!!

I have a 4 7 on my single cab year 17 and it hits

Prices on Installation is by phone only (832) 770-4366. Get Your Kit Today Atreklez.com/collections/2014-2018-silverado-sierra-drop-kits-rear-level-kits-2-4-3-5-4-6-6-9-6-10 Thank you for watching!!

Got the same pick up with a four and six launch it Z 71 Whitesville Drive

Thinking about bringing my 2000 Sierra 1500 single cab only thing is that is has the torsion bar in the front. So my question is Have u ever did a coil over kit with torsion bar delete? Is so I may be making a special trip to Houston. Really love the world u Guys put out... B blessed

Great work! Looks like a whole new different truck. It looks to me like the rear is sitting a bit lower than the front though

Very nice work guys! Do you guys know what the offset of these 24s were? I have a 2007 new body silverado w a 4/6 drop and Im going to be getting 24x10 with a +31 offset. Im just wondering if you guys know if these wheels will fit my truck ok without rubbing in the front. Thanks for the help

Next time please record the test drive, I wanna see how smooth it was especially on bumps and pot holes

Would I be able to bring mine from MO to be done? I have your mini notch but needs installed, would love to have it professionally done.

I’m on mcgaughys 4/6 same parts and my caster is in spec2.3 on the left and 2.9 on the right...

Is there a full video that shows all the steps to do for all of us DIY...

I have a 3 , 6 belltech drop on an 08 2 door Silverado. I believe I was able to use factory spindle.. with this kit. My question is I'm now at 140k miles.. and I need to do front end work. I was just going to replace upper/lower control arms and tie rod.. etc. With new shocks/struts. Someone told me there was a modified control arm for this truck to allow better alignment.. what brand and website do you recommend I use to replace entire front end

i did a 3/4 drop on 2014 silverado 1500 double cab. i used 2 inch drop spindles and belltech adjustable struts at 1 inch drop. it rides ok but in your opinion if i did 1 inch drop springs and putting struts at o drop will that give me a better ride . thnx awesome vids

With strut and spindles can you go with a 5? Iknow alignment wouldn be good but what if get upper control arm for that good alignment

I have two questions, does this kit affect the turning radius and will this kit still work with a single cab long bed?

I got a question? I got a 4,6 drop but I want the back a lil lower just like this truck and I tried to take the shackles off and just mount to the bracket I couldn’t get it to work is this truck on shackles

I have a 4/7 drop on my crew cab Silverado, I had to put helper bags on the back because the tire rubbed on the fenders with any weight in the bed.

Why weren’t shock extenders used on the rear..?

How does the maxtrac drop struts compare to belltech and mcgaughys

The front needs to go down a bout a " or so more but it looks awesome

Is that an aftermarket bumpstop

Would 26s fit without rubbing?

How much for a full bagged system for a 2015 gmc Sierra single cab?

Another nice kit.. what about a 03 F150 CrewCab? Any kits?

Where did you get the bump stop

Can I do this kit on a 5/7 with 26x9/26x12 will I have any issues

I need those bump stops who’s got a link? Or where can I buy them alone

Do the 24’s rub?

Where aré hoy located??

Size of tires

👍

stock hangers?

What tire size is it ?

The link for the kit please

Any 2007-2012 crew cab videos? More specifically 4/6 drops??

Do yall sell the adjustable lowering struts separately?

Is a notch required for a 3/5 drop on a 2018 Silverado crew cab? Thanks

I have an 06 chevy crew cab I'm working on, is there a 4/6 kit for 99-07 ? I Will also be running 24s, will I habe to cut or do any major work for it to work? thanks

We’re The lowering components bought as a kit or separate parts?

What’s caster? & is the caster on there gonna affect anything?

would it be the same for a 2008 single cab with a 4/7 drop? C notch not required?

Front needed a 5 inch

truck looks nice but i thought you were gonna show the installation process

I have a 2017 Silverado single cab with 305/45R22 how low I can go without rubbing tires ?

What’s the lowest you can go on a 2016 Silverado crew cab 4x4 without putting a notch

Anyone know the wheel specks

Do you guys do 4/9 drop? And would it have to get tubs ? Or what’s the lowest it can go without having to cut to fit any size rims

Do you recommend a 2/4 by belltech for a 2014 ram 1500 quad cab?

Anyone know the specs on those wheels? Or their ig?

can we get the exact link to kit hard to tell which one this is on website

What where the tire sizes for the 24” wheels?

How much will this labor cost for a 5/7 drop

Do u know the length that 2018 single cab bed is

Will caltrac still work on this drop?

Looks like a 3/4 drop on a Tahoe

Why do we have to watch him take off all four caps 🤦🏻‍♂️

Muffler delete next😫😭💀

For some odd reason the GMC looks lower 🤷🏽‍♂️

I would rather have the stock wheels on it doesn’t look so good with those 24” in my opinion.....but over all the work was done well I like the video but the owner should have been pointed towards something else more decent 🤭

Lowering a truck... doesn’t that make it less than a car? Can you haul stuff ? Do you scrap the bottom of all that money as you enter driveway? What happens at 70 mph in a cornering freeway, when you hit a pot hole or a bump? I don’t get it? Spending good money to lessen the weight carrying, lessen the trailer carrying tongue weight. It seems to defeat the reason of buying a truck. Mine have extra coil spring over shocks. My 1/2 ton dose 3/4 ton work . Dose this work of yours increase the trucks hauling power any? Or dose it just look cool to some? Remember “cool and stupid go together “

They should go lower