Dynojet Power Commander V: Adding Devices (AutoTune, Ignition Module, Secondary Fuel Module)

Подписаться 22 тыс.

Просмотров 154 тыс.

50% 1

Learn how to add accessories of the Dynojet Power Commander V, including Ignition Module, Secondary Fuel Module, AutoTune, LCD screen or all of them at once! www.dynojet.com/power-commander
We show you how to connect the devices correctly using your CAN cables as well as how to add the devices to your Power Commander V (PCV) network and make sure they are all updated with the correct firmware.
For more inspiration and knowledge on maximizing your Power Sports experience, check out our blog: www.dynojet.com/blog
For more support related articles and videos, please visit our Help Center: dynojet.zendesk.com/hc/en-us
Subscribe to our channel: ru-vid.com...
Instagram: / dynojetresearch
Facebook: / dynojetresearch

Авто/Мото

Опубликовано:

29 янв 2013

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@outdoorzone 3 года назад

FYI........CAN termination plugs are now built into every unit with a serial number that ends in 1510 or higher, per dynojet when I contacted them on 8-25-20!

@gtrman9706 8 лет назад

Thanks Chris,very helpful !

@akphoto2010 10 лет назад

Where the hell Im going to put all that things in my bike!!! You must change that!

@alexanderzayas8213 4 года назад

Awesome video I’m watching this 7 years later and was a big help understanding!

@DynojetResearch 4 года назад

Thank you, Alexander! Happy this helped.

@outdoorzone 3 года назад

Excellent info!!! I’m fixing to add your auto tune to my PCV on my wildcat xx! Thanks!!!

@DynojetResearch 3 года назад

You are welcome! Enjoy!

@av77garage97 11 лет назад

Great video thanks

@allangosling6134 Год назад

Thank you Chris for the information. I have 2003 Sereamin Eagle CVO 103 stage 4. I am upgrading from the power Commander 3 to the 5 with an Auto Tuner. When setting up there is no need for a dynamometer and the auto tuner oversees the engine performance while the engine is turned on. This is going on my motorcycle with a dual map switch (change back and forth between to maps).

@WhiteGravey 8 лет назад

i havent used a powercomander since 3... i was looking to install one into a hayabusa i just got but this shit seems so complicated now what do all these modules do?

@ranhazz 8 лет назад

What is the difference to the two can port cables that come with the autotune? I received a 4 wire and a 2 wire cable.

@rgvakis 11 лет назад

very informative! but if we want all modules on our bikes must have space ....and nowdays on new sportsbikes thats just simply not there...

@Deadlysuffera 10 лет назад

How do i get the the speed odmeter on the power commander lcd to read for 05 gsxr 600

@MauriFD92 9 лет назад

Can install the PCV + Ignition Module and use the IRC?

@chuxmall 3 года назад

how can I get the termination plug?

@victorjpb1 Год назад

If I only attach auto tune to my PC-V it still need the termination plug?

@KillerwhaleTRX 4 года назад

Need atricle number can link cable + terminator

@brandonpeterson9611 Год назад

how water tight are these, can they be submerged?

@Wrensspeedshop Год назад

I was wondering about the cab termination plug. My new auto tuner didn’t come with one and my PC V didn’t have one either.

@FlipHi808 8 месяцев назад

If you still wondering, check out the comment from @outdoorzone. “FYI.. ..CAN termination plugs are now built into every unit with a serial number that ends in 1510 or higher, per dynojet when I contacted them on 8-25-20!” I had the same question.

@christinaedwards5617 9 лет назад

You should make the cables longer so we can put them were we want I have the auto tune and PC and it came with a 4 inch cable

@peterlindvall7671 2 года назад

I agree! I extended the cable on my KLX250, so I could mount it elswhere.

@panosdanzis950 10 месяцев назад

can you tell us how this can be done with power commander 3 ?

@MartinMcMartin 2 года назад

Autotune question. I have just installed one, but in the list of devices on the network as you showed in the video it is not listed. I search for new devices but get nothing. The power led on the autotune is on. How would I ensure it is hooked up correctly?

@DynojetResearch 2 года назад

Hey there! Please reach out to our technical support at powercommandertech@dynojet.com or at 702-745-4303 and they will guide you through this.

@Wrensspeedshop Год назад

Did you ever figure out what the issue was? I’m having the same problem right now myself. Thank you

@petermoygannon698 4 года назад

all I'm trying to do is get my bmw s1000rr to be smooth and a constant RPM under 4 thousand RPM . this device is my last resort if the 2nd bmw bike shop says it's fine. it's shit in deep traffic doing 40 .jerky unsmooth. in neutral the rev needle is slightly bouncing around.

@jammyhires4598 9 лет назад

Too bad your instructions does not say anything about hat small plug.

@ebra189 9 лет назад

quik shifer i have the pvc 5 + auto tune on my 11 zx10r and i need to add a quik shifter to it do i need Power Commander(Q.E.M.) or (S.F.M)+ Quick Shifter sensor to make it work? i know that both will make it work but im wondering if Q.E.M alone will make it work with my 11 zx10r does it adversely affect in the future for street ride thanks #PowerCommander

@user-td2lj2pd7h 8 лет назад

Just bought an Auto Tune a few days ago and it didn't come with a can termination plug. I called dyno and they told me this was not necessary anymore for the June 2015 and up modules, but every video I've seen says that I SHOULD be using a can termination plug. Help?

@6982chad 2 года назад

I'm in the same boat. Didn't come with one and doesn't work at all.

@Wrensspeedshop Год назад

Did you ever get the issue resolved? Did you have to have the termination plug for it to work? I

@omarmateocampuzanogtz5636 2 года назад

i need conect only the power commander v to autotune module..thanks. have video?

@DynojetResearch 2 года назад

Yes, we have several videos available pertaining to the AutoTune module. Please use the "search" feature on our channel and type in "AutoTune".

@kevinhumphrey932 3 года назад

Can any off the updates or programming be down with a smart phone

@DynojetResearch 3 года назад

Kevin, you'll need a Windows computer to use our software. It cannot be done with a smartphone or tablet.

@Joe-fi4hv 3 года назад

Why have 1 device when you could pay for 3?

@TOGTFOPLOX 3 года назад

Biggest racket ever!!

@collinherold8047 2 года назад

Why not design and create just one module/box with everything inside it already? Or at least make it so one module is simply capable of running all those features, and they're like digital expansion packs or something. Idk what engineer, manager, or marketing team thought this was the way to go.

@DynojetResearch 2 года назад

Not everyone needs every module to suit their riding style. The more cost-effective and efficient route is to have optional modules.

@klum4502 3 года назад

$3000.00 later ... the power commander money grab! I have the PC5 and it is junk.

@micmcbane8726 2 года назад

Thunder max I feel I wasted money two.

@paulsimpson2232 3 года назад

Christ ! Just build one unit that does all ffs...its called a ECU ..this is bollocks .where do I put all this on my bike . I dont have room to carry a spark plug spanner. 🤦‍♂️🤪

@DynojetResearch 3 года назад

Paul, these are optional add-ons for the Power Commander V. You'll still get optimal air/fuel ratio with the Power Commander V itself. These options are for those who want more control over performance.

@kc.95 Год назад

Hope you will do better videos to explain everything, pls invest in your social media

@jessietaylor2963 3 года назад

To much crap there’s no way this is going to be awesome I’m out

@HgTrizzey1 Год назад

Agreed 😭

@motoroadrunner9589 2 года назад

Stupid designs tbh. Having troubles with my gsxr600 install for commander and ignition module. Airings weird and who wants to put a bunch of modules in the bike where there already isn’t much room. Wtf!