Dyson Ball | How to repair ripped Hose 

thank you so much, I did it, and I am a 70 year old widow lol. It was so easy to save the old hose and the trick of the warm water made it all so easy. love it

Gone are the days I could spend hundreds of pounds on a vacuum. When I noticed a rip in the hose I almost cried. Didn’t have enough money for the replacement part let alone a new Dyson. And I know buying a cheap vacuum replacement would mean buying twice. Your tutorial saved me ££. Although I had to glue it back on😅,your instructions were spot on. God bless you!

This gentleman helped us a lot with this tremendous tutorial. He basically solved our problem and our vacuum cleaner works well again.

Great video! I just repaired my 2002 Dyson Animal using this. Slightly different, and I had to scrape off the hardened OEM glue, but everything worked perfectly! Many thanks. I was not able to repair the tear for 4 years but your video solved all that.

Fantastic!👍I had been fiddling about with this for over an hour but after watching this the repair took literally 10 minutes!! Thanks so much!!

I don't even have a Dyson, but was looking for a ShopVac hose repair video...I stayed for the whole repair and I am a smarter DIY-er for it! 😁 Thank you so much for your video!! 💪🙏

EXCELLENT demo! Although mine ripped at the opposite end. 😩 But it looks like a commenter below said your fix it worked on the other end as well. 👏🏽

Thank you for sharing this video. I purchased a replacement hose and it didn't fit correctly. So your video helped a lot!

Thank you very much. The hose ripping is a flaw I wish they could have solved years ago. Too much tension on the end anytime you want to use the wand.

Thanks for this video! Unfortunately I found it after buying a replacement hose, but that's ok. It wasn't very expensive and now I can fix the old one and keep it as a spare.

First class tutorial - at exactly the right time! Thanks

THANK You…I’m up and running again with your Dyson ripped hose repair instructions. Greatly appreciated!

Thanks for posting, saved me a lot of time.

Brilliant. Thank you, saved this Yorkshire bloke a few quid 👏👏👏

Brilliant, these instructions helped enormously. No waffle, just clear instructions. Wish I'd bothered to research fixing before buying a replacement hose. 😁 Thank you very much!!

Thanks to this video I was able to repair my DC15. Different fittings but same method.

Many thanks RManni. Your tutorial worked and saved me £30.00. Great !!!

Thank you for letting me know not to try pushing in those three black tabs! I tried for a minute and then decided to look for a video.

Thank you! I found this video while trying to find a new hose to order, Fixed in in less than 30 minutes!

Thank you! Simplest video I found on RU-vid to fix this issue.

Thank you, will give me a little bit more life with my current hose.

Спасибо огромное. Надевала на сухую - не получалось - мучалась пол часа где-то. Спасибо за подсказку нагреть в воде

Thanks a million!!! My Dyson is repaired and working!! Much appreciated, thanks again 😊.

Thanks! Easy to follow and not hard to fix. Saved me $30.

Thank you for your video. I've successfully repaired mine following your instructions.

Great video. Thanks. The most in-depth I found on RU-vid. Others miss the most important section. Well done

Excellent video. Just fixed mine. Easy to follow. Thank you very much 👍

I fixed my ripped hose with this video, thank you very much 👍🏼

Thanks. I picked up a DC41 and managed to do your fix, and also fixed the bottom that was leaking as well, using a similar method. That was much more difficult to do, but it is possible. Thanks again :)

This is a very good and helpful video. I was ready to toss it in the trash. But I saw this video and fixed my vacuum in just a few minutes. Think again

Wait this is fixable!!!? Dude just saved us £20 on buying a replacement Would highly recommend adding some adhesive to the pipe so it doesn't come off but it's up to u

Very good video, thanks. However, if you don't put some kind of adhesive the hose will eventually come off.

I tried to repair my dyson DC 33 hose following this & after much time, effort & further damage to the worn hose decided to get a new one with little cost from a dyson agent.😀😀😀

Excellent - thanks for this - was about to spend £30 on a new hose, but now I know I can repair it - I won’t!

Thank you. It worked. I recommend this video especially versus other resources online who encourage you (wrongly) to force the tabs.

Thanks .Very helpful video .It helped me takeout a coin stuck in vaccum pipe.

Exactly what I needed to see. I followed your steps and everything worked out great. Thank you!!

This helped a ton. I bought a new hose and the damn thing didn't fit.

Brilliant! Thank you so much for sharing - it's worked a treat and vacuum cleaner doing its job properly again. 🙂

Thank you! Saved me a trip and money during the pandemic!!!

Good tips. Going to give it a shot now. Thanks so much.

Ouch, wish I had seen this before I tried to fix. Nice job!

Well done partner

thanks , fixed min in 10 mins , i used a hair dryer to warm plastic parts.

Perfect! Great video gave me the info to make the repair in about 15 minutes. I see your dog did get the screwdriver, I have several screwdrivers with the same K9 customization.

Worked great, thank you! I added some crazy glue at the receptacle just because I had some.

😊 thank you. I'm a "if I can learn how to fix things, I WILL!"

Thanks Really helpful video took you 5 minutes but took me an eternity to get it done but got it done.

Followed this exactly. Thanks saved £40+

Thank you just fixed mine saved med on buying a new hose/vacuum and saved me from injury hahaha as i try to push them with a screwdriver and it slipped abd just missed my fingers. Excellent indepth and good technique with yge warm water 👍🏾

What a relief! I can get back to cleaning LOL. Thanks for the lesson

Perfect video. Thank you. I’m off to repair my animal 2 hose.

Thank you. Dog definitely chewed your screwdriver 👍

Thanks man... saved me $30

Great info. Thank you. Love your doggy. 💕

Cheers mate. Warm water works a treat 👍

Excellent I’m doing that to mine right now thank you for the great tutorial

Thank you for this. I’ll give a try.

Good to see! I still would have cleaned the hose while it was apart and let it thoroughly dry before refitting. And of course the whole thing should be allowed to completely dry out before putting it back on the vacuum cleaner.

Brilliant instructions, thank you very much

Most impressive. Grateful.

Great repair video 👍🏻👍🏻 Though my issue is the other end...🙄😔

Many thanks for your help

Thanks for your help

Excellent video! Thank you sir!

Thanks you so much! You helped me so much!! Very grateful!

Thanks saved me some time and money !!

Just fixed my DC04 thank you

Thanks! Fixed mine. Appreciate the help.

you saved my life, thank you

Thank you. I've just fixed mine. :-)

Cheers fella just sorted mine thanks

Thank you. We saved by fixing ours too!

Excellent!

Many thanks.

Thank you, thank you, thank you!!!

Awesome! Very helpful!

Thanks so much. I will go and operate on my DC 42

Thanks so much 👍 fixed mine

worked, thanks

AmaxI’m my absolutely the best nstruxtuons and I even had the little Lego bits around as well! 😂

Thank you so much.Job done 😃😃😃

Thanks… big help :)

Thanks for this video!

Fab, hose sorted 🤩

Thank you so much!

Thank you really helped

Thanks mate, top tip!

thank you! this helps

Thanks so much, you saved me a few £

Very helpful thank you!

Genius

Thanks!

Thanks

Thank you. No my dog didn’t do it. 🤣. Don’t do this do not do this of course that’s the first thing I was doing

Order one. It’s cheap.

You didn’t glue it it’s gonna come on down again you can’t be that cheap they’re only 26 bucks on Amazon

Thanks but how did you release the hose from the machine? Great diy repair

Very helpful video. Thank you.

Thanks, great video!