Dyson V7 / V8 disassembly and cleaning tutorial. 

The way that you just showed everyone how to do the job without a single word of unnecessary waffle... Everybody here salutes you

Excellent. No 60 minutes of talking nonsense just getting down to it. Love it. Thank you. Saved to my bookmarks for easy reference.

Just finished disassembling and cleaning my V8. I only had one little issue which I think I resolved, however my Dyson now has a slight whistle ;) which not only doesn't bother me but brings a smile to my face. I'm pretty proud of myself for taking the whole thing apart and putting it back together again. Thank you for your excellent tutorial!

Disassembly with no talking 10/10 And ASSEMBLY 🫨 20/10

I will also add my support for NO useless talking. Well done. Love your channel

Thank you so much. This was not only informative but therapeutic.

Excellent - a fine example of how such videos should be done. A splendid resource for people like me who can’t trust anything until they’ve taken it to bits . . . 😂

I dropped my v8 and it twisted the cylinder bit in a funny angle. This video helped me correct it so thank you!

Best video - incredibly useful. Thank you for taking the time to show how it's done. So very helpful and straight to the point.

I'm excellent video and I think you've encouraged me to buy a different make that doesn't mean that much work

Thank you . And loved that you didn’t say a thing just showed how to do it. Yeah!!!

Thanks! I had a problem reaching the 4 T8s. In the cyclone head. The bit was too short and the handle too wide. Then I saw you put the screws into the lid of the same I fix it kit I have. So I went back and noticed you used a hex bit as an extender! Brilliant video!

"Staying in one piece" is not the problem, but if cheap plastics are used there is a risk of deformation. Anyway I tested it yesterday and ALL parts are perfectly fine and therefore dishwasher safe @ 65°C. Of course the two red & black gaskets made out of foam should be cleaned manually. There is just one rubber seal you missed to remove and show in your video. It is mounted on the plastic part opposite to the round metal filter. I also removed the red rubber seal on the dust container by removing two T10 Torx screws. There was alot of gunk around that seal. The black rubber seal on the container cover can also be removed. All these rubber seals should be cleaned with special rubber care spray that keeps the rubber soft and elastic. In the end I want to thank you for your helpful video.

One of the best and helpful video I ever seen!!! Did everything, work perfect 👍🏻 thank u!!! 🎉

Excellent instructions without words!❤

thanks for taking the time to share this how to. very useful for short and long term maintenance.

我的Dyson v7 好像死機啦，不工作啦。😂。昨天跟著你的video 清拆洗了整個機，今天非常好用，跟新的一樣，🙏🙏🙏。

Fabulous video! The only one I've found for the model and type Dyson vac that I have. The rest of the videos I've seen are silly compared to yours. I haven't needed to do a complete break down - deep cleaning as of yet but if I ever do I'll be back to watch this video and any others you have. Very fine video indeed. Thank you!

Best tutorial ever, now i know.

Beyond helpful. Many thanks 🙏🏻

Wow. So helpful, thank you!

Cheers bro, just saved me buying a new one

Cheers mate really appreciated your video gave absolutely crystal clear instructions 5⭐️

Absolutely brilliant. Thank you

Thank you so much!!! This was super helpful, cheers!!

Excellent video - thanks

Thanks. that was a big help!

Really lovely video! It would be helpful if you could list the exact tool sizes needed in the description as I had the same issue as another viewer where I didn’t realize I needed smaller than I had! I appreciate the link for a toolkit though, very helpful. Thank you!

Perfect video! Thank you so much

Super vid, how to clean your dyson but also doubles as an asmr vid 😊

Very useful, thank you so much

Gracias , excelente video !!

Excellent video, thanks.

Nice! Thank you for this video

Thanks alot for your help.

Very very clear how to do

Great jobs. Thanks

Thank you so so so so so so much from germany. I ve disassembled it, washed it and now waiting for the parts to fully dry. I was shocked about how much gunk there was inside the cyclone parts 😮😮😮😮 🤮

Thank you sooo much for the in-depth video. I swear my Dyson vacuum will last years longer due to cleaning all the parts of the vacuum. Thank you - thank you!

merci pour ces explications

I didn't destroy anything. Awesome tutorial!

Большое спасибо. Я все почистил как Вы. Грязи ужас. Спасибо. Вы супер. 👍👍❤❤

Perfect! Thanks!

Only video I can find which explains how to remove the rear casing to clean motor filter. Sadly hasnt fixed my issue of not working in max mode. But great video anyway.

Very very thank you 🙏🙏

Thank you❤

Excellent demonstration. The post filter is a bit different on the V8.

Ahhh, I had the cone shaped thing upside down and it would suck dirt straight under the white jets . Had it like that for a year .

fabulous

Here's hoping this fixes the pulsing issue... waiting for everything to dry so I can put it back together 😅

Thanks!

So I rinse water through the cylinder thing once a week. Probably not a good idea?

Can you just dunk the cyclone in soapy water? I don't think I have that much time to disassemble everything

Is there anywhere I can get those two gaskets (red and black) online? I have checked amazon and they have some but it doesn't look the same.

Excellent video - except I'd add a bit about really cleaning the flap valve. This is a mojor area of blockage for me - and it's really difficult to clean. Well done.

I'm having one problem even though the video is excellent and I'm using the same toolkit. I can't get the screwdriver in far enough to tighten the long T8 screws. The extender doesn't fit in at all. I have the V7. Any tips?

Having a terrible time getting the cyclone to come off. Seems the two red rods that go into the channel are stuck and so hard to get in and out. Also when trying to pull up on the little red handle to discard contents, it is so hard to pull up and down. Any thoughts would be greatly appreciated

After how many years of use is this buildup from?

I didn't realise how many part's went into this tiny thing 😮

👍

I started disassembly but was annoyed to see that the smallest Torx I have is a 10...so now I need to go to the store 😩

I reassembled it as you showed but it is heavy to close it and the led won’t close well 😢 any suggestions please

I need a dust filter for a Hoover Max Extract® 60 Pressure Pro™

would there be risk in just dunking the entire cyclone assembly in hot water for a couple of hours with dish soap and then letting dry for 24-48 hours?

I think I would buy a new one before I attempted all of this !!!

hi! which screwer size it is?

Make a video on ps4 slim

Theres no button at the bottom of my dyson?!

I just know if I went to that level it wouldn’t be working when I put it back together

followed all and still does the same thing Grrrrrrrrrrrrrrrrrrrrr

Bro thanks for the video but just buy a Henry hoover it’s the best

Is it stupid to put all the plastic parts except for the gaskets into the dishwasher ?

asmr

Don't take it a part. Just hose it really good inside and let it dry ,work for me .Good luck

Nope 😮

Bloody thing...I spend more time trying to clean it than actually vacuuming. Worst appliance I have bought. I will never buy another Dyson product.

I am not even going to try

Thanks for covering all dismantling procedures 🦘

Really lovely video! It would be helpful if you could list the exact tool sizes needed in the description as I had the same issue as another viewer where I didn’t realize I needed smaller than I had! I appreciate the link for a toolkit though, very helpful. Thank you!