E220 CDI Mercedes Timing Chain Replacement W210 from Om646 engine 

Now this is a man with some balls , prolly one of the few Timing chain DIY videos on the free internet and prolly the only good one on a CDI engine. Much respect

Thank you very much sir, I drive this car since 2007 380000km now still runs great, manual

this is certainly not a first time you doing this job surely....great knowledge experience 2nd to none.class 1

Great work. It's nice to find videos of these kind of repairs, especially for this car. Easy to understand, and you seem to know what you're doing. Keep it up!

I'll just go back to bicycle; chain is dead easy on them....respect! and a great video; not a single swear word.

thanks for this, i own the exact same car and i‘m currently restoring the body, the engine is defenitly next

thats om611 not om646

Parfect video ! I learned a lot about serviceability of this engine. It doesen´t seem impossible but the need to remove the head in order to replace the guides is crazy. I remember the timing chain job on my BMW and this seems to be a bit worse since you need to remove the turbo, intake, injecotrs etc. but on the other hand, the 220cdi seems to have much more robust and simple design which can last a lot longer.

Great job thanks for posting the video. Nice and easy to understand

Bel lavoro complimenti, considerato il lavoro cambiavo tutto pulegge e tendi cinghia.

Trank you for the Video!

Why would you change the chain on a om611?? They last for atleast 800.000km You dont have to open the chain at all, you remove the high pressure pump and the camshaft pulley and it falls down.

Hey man, i was trying to extract my injector and the screw breaks in half, could u tell me that if i remove all injectors and screws, that half inside would block me quiting the valve cover or not? Thanks!

My 2016 Infiniti Q50 has a 2.2 diesel Mercedes engine. I've done 240k miles and it still runs okay. No noise from the chain. Is there a way just to check it rather than replace it?

Great video but I am sure this is an OM611. It looks a bit different than my OM646 in some details. Also the OM646 was not used in W210. Anyway this can become very useful for me as I have to change my timing chain of my S203 with OM646.

Amazing work bro !

Hi where you based I want to change timing chain on my e220

Excellent video!

Fantastic video. We need more of these.

If the big nut on the crankshaft pulley cannot come off, then have to give up?

Whit chain replacement is it not necessary to also replace the sprockets?

1.9 pd timing belt is just fine after seen this.

How can you remove ac condenser if you dont remove refrigerant?

Good to see you, to make these more complex videos ! Anyway where are you from mate?

Hi where are you based? I want you to change the belt on my 2015 e220d Thanks

Best ☝🏿💪🏿💪🏿

Can't You just remove camshafts and roll with crankshaft new chain connected provisionally to old? Without removing anything except valve cover.

Român?

How many Newton meters does the crankshaft gear have .............. And control cover Newtonmeter

5:17 if you out an new on how many NM and degrees I have to put it back?

great sharing video

sweet job there. to do just the chain tensioner is there a special method asuming its the same for a om648

Good job 👍🏼

Nice video sir

Шланг надува , обязательно отрезать)

hi, can i use this as a guide for an OM646.963 engine? car is facelift w203 c220 cdi no dpf

Buenas algún tutorial para desarme de motor y puesta ah punto de un mercedes s320 cdi

at what mileage should the chain be changed? because im looking into buying a w204 220cdi so im wondering if its a common problem or not.

Great work but that is an OM611 not OM646!

who changes a chain on these engines? it can last 100000000 km

Do I need to time the fuel pumps?

Hello bro, big fan here, how long did that whole job take to complete?

nice work, but cleaner work shouldve trained the oil :D

I just gonna rebuild the whole engine at that point

can i fly you over to my place to help me?

Why you do it so difficult way? No need so much work for just replace timing chain. This duplex chain nevere brake up. But anyway good luck!

Clk 220 Cdi 240K Mls same Chain same ATF

👍super.☆☆☆☆☆

NO! i AM NOT HAPPY WITH THIS JOB! yOU SHOULD REMOVE THE ENGINE FIRST, remove THE CYLINDER HEAD, CHANGE THE SLIDERS!!! OF THE CHAIN! ALSO-IYOU SHOULD CHANGE ALL THE SPROCKETS!!! THE CHAIN IS WORN AS WELL ALSO THE SPROCKETS A RE WORN DOWN! ALSO- WHAT ABOUT THE OIL PAN GASKET? IT SHOULD BE CHANGED! ALSO THE REAR AND FRONT CRANKSHAFT SEALS! YES THIS WILL BE A RELAY SLOPPY JOB IF DO NOT REPLACE THE VALVE STEM SEALS!. BUT, BEFORE THIS YOU SHOULD INSPECT THE CONDITION OF VALVE AND RESURFACE THE VALVE SITS AND THE VALVES AND CHECK IT AGAIN . also! VERY IMPORTANT- CHANGE THE PISTON RINGS AND ROD BEARINGS AND CRANK SHAFT BEARINGS!!!. ALSO- THE INJECTORS!- BRING THE INJECTORS TO BOSH SHOP TO BE RE CALIBRATED AND UPDATE THE NEW CORRECTION NUMBERS INTO THE ECM... MAN, YOU JUST DO SLONPY JOB WITH THIS TIMING CHAIN. IF YOU DO NOT DO ALL THIS THINGS THAT THE BETTER WAY WAS JUST TO CONNECT THE NEW CHAIN TO THE OLDER ONE AND MADE TWO REVOLUTION ON THE CRANK SHAFT AND TO CONNECT THE NEW CHAIN PIN AND DUN- JOB FOR 15 MINUTES

Thats a OM611 engine !!!

In other words, not a weekend job

How many miles?

How over engineered can something be

Луче ты гавари па руски! 😁☝️

That's not an OM646

wash it first

Tear down the whole car 🤣🤣🤣

Если уже снял пол мотора, то наф цепь разъединять?

🫵 hahah Mercedes Hahaha a distribution chain never changes on this model the