E36 M50B30 Stroker Timing and Cam Setup

Подписаться 7 тыс.

Просмотров 16 тыс.

50% 1

The installation of my M54B30 Intake and M50B25NV Intake (as exhaust) cams.
Thanks for watching!
/ pamogriffiths
⏭ What to Watch Next:
E36 Spongy Brakes Permanently Fixed: • E36 SPONGY BRAKES PERM...
Fast Free Fix E36 Wipers Won't Turn Off: • Fast & Free Fix for E3...
E36 Mods: What did I keep and ditch? • E36 Mods Update: What ...
🔧 What's in my Tool Box (2021):
3/8" Ratchet: Halfords Advanced
3/8" Impact Socket Set: amzn.to/3w9oHgO
Pick Set: amzn.to/33J3TAI
3/8" Drive Universal Joint: Halfords Advanced
Spark Plug Socket: amzn.to/3tQxvGQ
3/8" Impact Wrench: amzn.to/3brpXE4
3/8" Impact Ratchet: amzn.to/3tPIbFQ
1/2" Air Impact Wrench: amzn.to/2Rln5BZ
Very Good Prybar: amzn.to/3oj0MJa
10mm Ratchet Spanner: amzn.to/3btaX8Y
Metric Spanner Set: Halfords Advanced
Angle Grinder: amzn.to/3fmL0ck
Cheap Dremel Tool: amzn.to/3eTVAsp
TIG Welder: ebay.us/sCgEAl
Bargain Soldering Iron: amzn.to/2SHVbjR
Paint Pen Set: amzn.to/3fjnBsi
LED Work Light: amzn.to/3hsLuQB
Deep Socket Set: amzn.to/33Mum0c
Torx Allen 3/8" Socket Set: Halfords Advanced
Air Compressor: ebay.us/VcXd6Q
M50 Timing Blocks: ebay.us/rwsFnv
3/8" Shallow Socket Set: ebay.us/TkPJQj
🎥 What's in my Camera Bag (2021):
Camera: amzn.to/3bt8xqN
Lens: amzn.to/3oiVSvC
Lens Filter Kit: amzn.to/2Qj3e5S
In-Car Mount: amzn.to/3tJteoM
Microphone 1 (Lavalier) : amzn.to/3oqvgsP
Microphone 2 (Shotgun): amzn.to/3hponXi
Go Pro: amzn.to/2RQ5B0t
Disclaimer: This description contains affiliate links. This means I may earn a commission should you choose to make a purchase using my link. This helps me continue to produce free content for RU-vid and hopefully hooks you up with a useful product recommendation.

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 74

@Cos27O 4 года назад

MORE exciting videos to come?? I don’t know about everyone else, but I’ve been ecstatic watching these last couple vids and seeing all of your progress. Keep it up, man! We’re all rooting for you

@otacon4065 4 года назад

haha told you this earlier Pamo didn't I ;) keep giving the people what they want bro!

@adamsubtract81 4 года назад

The cleanliness of that block gave me a semi

@whitty132 4 года назад

Thanks for another great video.So exciting seeing it coming together ...I was so pleased to see you fit the vanos without any special tools. Cheers

@tiitsaul9036 4 года назад

TD mark at the front pulley in my m52 was almost a degree off. I measured with dial indicator directly from piston.

@SOLiDNiTROGENv8 4 года назад

You are killing it, good pointing out pazi88s work. I've been thinking my car based on his videos for a good while now. Excellent work!

@ManSeeksCivic 4 года назад

Thank you and I'll send a public thank you to the scandanavian legend himself - without Pazi's videos I wouldn't have got half the way through this.

@otacon4065 4 года назад

"I'll just grab my nutssss!" you'll love that lower temp stat, it's what I run in mine, remember I have heating and a quarter temp water in less than 5 mins so ideal for cold weather when you're freezing and it's all steamed up! I might even have a 78 degree one, but I know it was lower and it's mint! Also have that billet stat housing too or one similar to yours.

@robbaker9103 4 года назад

Loving this build man I can't wait to see the finished result. I'd love to do something like this to mine but I don't have deep enough pockets or the ball's to do it! I'm pretty sure I'd end up with a junk engine halfway through lol

@ManSeeksCivic 4 года назад

It's like having babies man.... There's never a "right" time and you wonder why the hell you did it constantly after the fact 😂

@robbaker9103 4 года назад

Pamo Yeah I hear that lol

@otacon4065 4 года назад

haha @2:44 it looks like an owl or summit lol. LOVE how edibly clean it all looks super silver and nioce! I also like how it doubles as a functioning perfectly sized phone holder haha me and salmon would do something like that!

@budha59 4 года назад

World's tyniest hammer for vanos cover

@paulgallagher1376 4 года назад

doing well buddy!

@ManSeeksCivic 4 года назад

Thanks.

@seffens1313 2 года назад

Heeeeey buddy... You woulding by any chance have a link for the Guy on RU-vid, that you got you info from to make this happen??😅

@ManSeeksCivic 2 года назад

Pazi88

@cihangirasi 2 года назад

Hello. There's the M54b30 suction eccentrical and the valve-free suction eccentr. How should I wear these eccentrics? Is it right to set it up with the classic timing apparatus. I apologize for the inadequate English

@_coffeeandcigars 4 года назад

Hey Pamo, not shure if you were aware, that Pazi set the opening to 0,1 mm by accident. He was trying to go to 1mm open at TDC for the correct overlap. Its clarified in the comments of his video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZjKEzgb6lfo.html I am too in the process of doing the same as you (M52 stoker) i also have the M50 cam for exhaust side but the S52 instead of M54 for intake. My Block is Aluminium but i have inserts in it :) Are you also on MS41/Romraider? Best of luck for the rest of assembly!

@plamendimitrov6839 21 день назад

Hello what is the timing for m50nv intake cam as exhaust? Thanks in advance im building m52b30 stroker

@tillbortels5306 4 года назад

Becoming pro! ;)

@rady1349 5 месяцев назад

Hi I have vibration at 2200 to 3500 rpm after upgrading the engine from 2500 cc to 3000 cc please help Thank you for your kindness

@placeholdername3206 4 года назад

Thats a clean looking m50 bottom end with the bmw logo and everything, whats your secret lol

@ManSeeksCivic 4 года назад

More luck than judgement I reckon

@jimmadis4128 3 года назад

Hey mate! I have a m50b25tu aswell and I instal this setup yesterday! I read from pazi88 that u have to machine the sprocket mounting surface down by 2mm for the M52's. Is that same for M50's?

@ManSeeksCivic 3 года назад

Yes. The heads are almost exactly the same.

@alejandronm8845 Год назад

Hello I need help timing my m50b30 stroker, do you know where can I get the 3d printed tool that you name in some comments? Thank you!

@ManSeeksCivic Год назад

They are now sold on ebay.

@claytonhaske 6 месяцев назад

@@ManSeeksCiviclink?

@ilkin-898 3 года назад

Head gasket original na 1.7mm

@hitman1268 4 года назад

Bmw e36 love king car .no dead bmw e36.

@rayenezemouli2070 2 года назад

Is the stroker need tuning or stock Map?

@blazet7176 2 года назад

which cam setup is this, i have m54b30 and m50b25nv cams and trays. about ready to put the cams in and time the motor. it looks like in your video that you can't use the timing blocks. is this true?

@ManSeeksCivic 2 года назад

You use the timing block for the M54 cam, it sits normally as an intake cam. The m50b25nv intake cam is used as an exhaust cam which means that it sits about 60 degrees off its normal angle to allow it to work. There are now 3d printed timing blocks available which make this job much easier.

@blazet7176 Год назад

@@ManSeeksCivic the m54 cam is the exhaust one correct?

@ManSeeksCivic Год назад

No, the M54 cam is the intake.

@petarmalinov2177 2 года назад

Hi. I know this video is old but I have one question. I build turbo M50 with two intake cams. How mush lift to set on 6th cylinder ot TDC to have perfect setting for turbo engine. I know overlap is not good....

@ManSeeksCivic 2 года назад

Because I've not built a turbo I wouldn't be sure. I'd assume the stock setting would work... But to give an optimal setting would need someone with more experience than me.

@ManSeeksCivic 2 года назад

Good luck with the build.

@markusmuller2156 Год назад

Hey Peter, I have also a M50 double intake cam set up. do you get Infos about houw much lift on TDC? My Setup bring me high Exhaust Gas Temperatures at high RPM. So i have to change it. Maybe you get a good Setup for me??

@cihangirasi 2 года назад

Exhaust camshaft position false... The corner should face up a little higher

@ethanbhagwandin2684 2 года назад

Hi there, will m54b30 Intake camshaft fit onto m50b25 non vanos

@ManSeeksCivic 2 года назад

Should do, you'll have to check cam tray clearance or use the m52 tray.

@becomematrix 4 года назад

Any idea what power figures this is making?

@ManSeeksCivic 4 года назад

Not yet.......

@foskye3692 3 года назад

@Pamo Hello, I have seen your video and I really liked how you work. I have 2 doubts to see if you can solve them for me, 1st, what do you mean by the letters TDC? and 2nd, is the opening on the valve 0.1mm, which is 1 tenth or 1mm? I read comments and did not understand it very well. I am from Spain and I am doing it on a m50b25 nv engine the stroker, is this setting of valve opening also valid for m50b25 nv? Thank you

@ManSeeksCivic 3 года назад

TDC = Top Dead Centre 0.1mm is 1 tenth of a millimeter The valve opening will work but there is quite a large range which you can use that affects how the torque curve responds. There are now a few guys making 3d printed timing blocks that make this process much much easier - run a Google search and you should find them. Good luck.

@foskye3692 3 года назад

@@ManSeeksCivic I imagine the TDC to be from the valve? The valve is in tdc, is that where you have to give it 0.1mm to stay open? Is there no problem of any kind in the operation of the engine with respect to touching the piston heads? Thank you very much, I was really going crazy because not many people do this. Thanks

@ManSeeksCivic 3 года назад

Top Dead Centre refers to the piston being at its maximum height in the cylinder for a particular cycle. You use this point to check the opening because its a set point which is easy to confirm in the engine cycle. No you will not touch valves with this lift, these engines are capable of much higher lift than these cams cam provide.

@ManSeeksCivic 3 года назад

en.m.wikipedia.org/wiki/Dead_centre_(engineering) Check here for a better explanation than I can provide

@foskye3692 3 года назад

@@ManSeeksCivic I understood it, in the TDC with the piston at the top, which is the setting mark of the crankshaft pulley with the cover. I give 0.1mm of opening to the valve, is that so? thanks friend

@GaragE36uk 4 года назад

Hi Mate, Any more progress on this?

@ManSeeksCivic 4 года назад

Another video is being edited as I speak and should be out on Friday evening. We were hoping for today but my filming is a nightmare and my excellent editor has to work her magic 😂

@GaragE36uk 4 года назад

Excellent cant wait. I have just purchased an m54 engine to do a similar build so have been following your videos. I am using an m52 block like you originally planned on using but the threads stripped on yours, did you ever work out why that happened? The arp head studs you used, was they specific to m52 ally block? From your videos I didnt see you buying a new set of arp headstuds when you swapped to the m50 block. The m52 arp specific head studs are 15mm longer than the m50. Not sure if that would have made a difference to stripping the threads?

@ManSeeksCivic 4 года назад

@@GaragE36uk I used stock head bolts... Not studs. I'm fairly sure the threads stripping was down to the overheat I'd had previously. I believe this softens the alloy and leads to the issues. A virgin ally block should be fine.

@GaragE36uk 4 года назад

@@ManSeeksCivic ah for some reason I thought you used arp. That's my theory out the window ha ha Thanks again, look forward to the next installment

@cihangirasi 2 года назад

08:02

@embturbo 4 года назад

Hello, Pamo. What is the point of clocking the exhaust cam 62° forward?

@ManSeeksCivic 4 года назад

It's actually an intake cam being used as an exhaust cam. This is me setting the correct timing to make that work properly.

@embturbo 4 года назад

@@ManSeeksCivic I know it's m50b25 NV intake cam but i didn't knew it has different position, thanks.

@ilkin-898 3 года назад

Hello intake how much 0.00m? Exhaust 1.mm

@ManSeeksCivic 3 года назад

0. Use the standard timing setup for the intake cam. Again, this can be adjusted slightly to raise the toque curve, but begin with 0

@martinsrazmanis8173 4 года назад

You exhaust cam timing is wrong, it shoud be 1mm lift, not 0.1mm.

@ManSeeksCivic 4 года назад

Well spotted. There have been a few before me who have done this setup. I started with 0.1mm as per the pazi videos and have since gone to 0.5mm. I may try 1mm also to see how it moves the power band. 👍

@martinsrazmanis8173 4 года назад

@@ManSeeksCivic I have same engine setup with 11.5cr, but i dont remember how i set my exhaust cam, i think 0.5mm. Only after i finished engine and drive half year i read this www.romraider.com/forum/viewtopic.php?f=58&t=13968&start=75

@ilkin-898 3 года назад

Hello 0.9 .06 ?

@ManSeeksCivic 3 года назад

Around 1mm open at tdc.

@ilkin-898 3 года назад

@@ManSeeksCivic what 1mm? 0.6mm no

@ManSeeksCivic 3 года назад

It's preference. You really need to start with 1mm then log the cars torque curve. Adjust until you're happy with your setup.

@ilkin-898 3 года назад

@@ManSeeksCivic 1mm okey Camshaft m50b25 no vanos yes 240 9.7