Тёмный

E36 M52B30 Stroker - We Are Ready To Build! 

Pamo
Подписаться 7 тыс.
Просмотров 26 тыс.
50% 1

Finally the parts collection and primary prep work is complete, we are ready to start assembling the engine.
Thanks for watching!
/ pamogriffiths
⏭ What to Watch Next:
E36 Spongy Brakes Permanently Fixed: • E36 SPONGY BRAKES PERM...
Fast Free Fix E36 Wipers Won't Turn Off: • Fast & Free Fix for E3...
E36 Mods: What did I keep and ditch? • E36 Mods Update: What ...
🔧 What's in my Tool Box (2021):
3/8" Ratchet: Halfords Advanced
3/8" Impact Socket Set: amzn.to/3w9oHgO
Pick Set: amzn.to/33J3TAI
3/8" Drive Universal Joint: Halfords Advanced
Spark Plug Socket: amzn.to/3tQxvGQ
3/8" Impact Wrench: amzn.to/3brpXE4
3/8" Impact Ratchet: amzn.to/3tPIbFQ
1/2" Air Impact Wrench: amzn.to/2Rln5BZ
Very Good Prybar: amzn.to/3oj0MJa
10mm Ratchet Spanner: amzn.to/3btaX8Y
Metric Spanner Set: Halfords Advanced
Angle Grinder: amzn.to/3fmL0ck
Cheap Dremel Tool: amzn.to/3eTVAsp
TIG Welder: ebay.us/sCgEAl
Bargain Soldering Iron: amzn.to/2SHVbjR
Paint Pen Set: amzn.to/3fjnBsi
LED Work Light: amzn.to/3hsLuQB
Deep Socket Set: amzn.to/33Mum0c
Torx Allen 3/8" Socket Set: Halfords Advanced
Air Compressor: ebay.us/VcXd6Q
M50 Timing Blocks: ebay.us/rwsFnv
3/8" Shallow Socket Set: ebay.us/TkPJQj
🎥 What's in my Camera Bag (2021):
Camera: amzn.to/3bt8xqN
Lens: amzn.to/3oiVSvC
Lens Filter Kit: amzn.to/2Qj3e5S
In-Car Mount: amzn.to/3tJteoM
Microphone 1 (Lavalier) : amzn.to/3oqvgsP
Microphone 2 (Shotgun): amzn.to/3hponXi
Go Pro: amzn.to/2RQ5B0t
Disclaimer: This description contains affiliate links. This means I may earn a commission should you choose to make a purchase using my link. This helps me continue to produce free content for RU-vid and hopefully hooks you up with a useful product recommendation.

Опубликовано:

 

2 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 53   
@adamsubtract81
@adamsubtract81 5 лет назад
Great to hear you'll have a dyno result bro, good work as always
@ManSeeksCivic
@ManSeeksCivic 5 лет назад
Thanks buddy, I'll hopefully manage to film it too so it'll be out there for the world to see 🌍
@trinityac6735
@trinityac6735 2 года назад
Love the build I hope you went for catch can setup to keep blowby out of those ports
@jayc4721
@jayc4721 5 лет назад
5 spoke 👌
@vincentrdelinares6732
@vincentrdelinares6732 5 лет назад
Do you know you can use 330i intake cams and 325i non vanos exhaust cam as a cheap « m3us » cams ;) you just need to grind a little bit of the 330i cams and it fits right in here.
@ManSeeksCivic
@ManSeeksCivic 5 лет назад
That's what I'm doing buddy👍
@mistreku
@mistreku 5 лет назад
7:10 a tight fisted scot? preposterous!
@philjunior5201
@philjunior5201 5 лет назад
try to make a video how to assemble this motor......holla from greece keep the good work!!!!
@ManSeeksCivic
@ManSeeksCivic 5 лет назад
I'm going to try my best👍
@fidelistaasika6908
@fidelistaasika6908 Год назад
can i use 84.5mm piston for m54b30 with 145mm robs for m52b20 ?
@whitty132
@whitty132 5 лет назад
Brilliant video....Great prep makes for a great result.....i've been looking forward to getting this video.....good luck mate...
@JuhaEerikki
@JuhaEerikki 4 года назад
Merry Christmas from Finland! Please keep the videos coming! 🎅
@josephstinson7380
@josephstinson7380 2 года назад
I’m having problems finding a master rebuild kit for my m50tu out of my 94 325is mtechnic. Do you suggest any websites? Fcpeuro? Not finding much else.
@ManSeeksCivic
@ManSeeksCivic 2 года назад
Have you tried "AUTODOC"
@MrHandsomejackuk
@MrHandsomejackuk 5 лет назад
nice one following you... cant wait to see the dyno results...
@arielkisara3197
@arielkisara3197 3 года назад
hello can you tell me m54b30 crankshaft and piston size data
@MrZoranbebek
@MrZoranbebek Год назад
hey Pamo,does m54b30 internals clear vanos regarding piston valve clerance or you have remove vanos
@psycho3344
@psycho3344 5 лет назад
What crank are you using pamo?
@ManSeeksCivic
@ManSeeksCivic 5 лет назад
M54b30 from a 330ci e46.
@JuhaEerikki
@JuhaEerikki 4 года назад
@@ManSeeksCivic There might be some harmonics issue with the b30 crank if I remember correct?
@ManSeeksCivic
@ManSeeksCivic 4 года назад
@@JuhaEerikki Sadly they don't like too many revs. This can be helped by a super damper but I've not got a spare £1k to allow me to rev past 7500. It's no 2J but it'll be a little nicer than before 👍
@JuhaEerikki
@JuhaEerikki 4 года назад
@@ManSeeksCivic Thank you for your kind and informative reply as I'm considering stroking my m50b25tu
@mistreku
@mistreku 5 лет назад
can't wait for this! it's something i always wanted to do with my old 325i but never got to it. considering doing it to my 328 now, but not sure if that whole work is worth it, for the extra 200cc.
@ManSeeksCivic
@ManSeeksCivic 5 лет назад
Honestly speaking its not really worth it, it's purely fun and a whole load of learning for me. If it works as I've read then I'll be a happy man.
@mistreku
@mistreku 5 лет назад
@@ManSeeksCivic I know it's quite a bump in power in the 325, especially since that engine is not very torquey, and I think you'll actually feel the difference in the 328 as well, considering you're also using those cams. Really looking forward to this, IMO - the stroker, cams, M50B25 intake manifold and remap should see you around 230 bhp, at least. Maybe 240 even, that would be sweet. No pressure, lol. Not trying to raise the bar, just guessing.
@tiitsaul9036
@tiitsaul9036 5 лет назад
I believe 200cc makes very small difference in peak power. Increase in displacement should bring torque curve to lower rpm, thus making it better for street use. Increase in stroke also increases the compression ratio which makes it really worthwhile. Cams make noticeable improvement through entire rev range. I’m interested to see how much more power can you gain after a proper tune. Mine runs pretty good without any major tune.
@otacon4065
@otacon4065 5 лет назад
haha as promised!
@_IRONJAW
@_IRONJAW 4 года назад
ECU wise would you run fine on stock? or a tune is necessary?
@ManSeeksCivic
@ManSeeksCivic 4 года назад
It would run, but not well. You need to tune the engine to allow the car to run without the adaptions working like mad.
@yaboijames_
@yaboijames_ 5 лет назад
Looking forward to this and the more detail the better as far as I’m concerned!
@ManSeeksCivic
@ManSeeksCivic 5 лет назад
Thanks and I'll try to keep it honest, thorough and as clear as possible.
@andrewmarriott4033
@andrewmarriott4033 5 лет назад
Not got a clue what a stroker is lol but always love your videos
@ManSeeksCivic
@ManSeeksCivic 5 лет назад
Thanks Andrew. Hopefully I'll pass my knowledge on 👍
@annabanna666
@annabanna666 2 года назад
who would u recomend for vanos units, thanks
@ManSeeksCivic
@ManSeeksCivic 2 года назад
DIY if possible, but it depends where you are. In the world.
@annabanna666
@annabanna666 2 года назад
@@ManSeeksCivic I'm in new Zealand. Happy to rebuild myself. Any kits you trust and recommend
@huseyinerdem6934
@huseyinerdem6934 4 года назад
hi pamo.what would you use for the enginee parts and how many horsepower do yu expect thank you
@ManSeeksCivic
@ManSeeksCivic 4 года назад
I don't understand "what would you use for the engine parts". I would like to see anywhere around 240 crank horse power 👍
@huseyinerdem6934
@huseyinerdem6934 4 года назад
What parts did you use in the engine?
@ManSeeksCivic
@ManSeeksCivic 4 года назад
@@huseyinerdem6934 m50b25nv block, m52b25 head, m54b30 crank rods and pistons, M54b30 intake cam, m50b25nv intake cam as exhaust.
@huseyinerdem6934
@huseyinerdem6934 4 года назад
I am using m52b20 I want to use s50 cam to this engine, do you think this is possible?
@ManSeeksCivic
@ManSeeksCivic 4 года назад
@@huseyinerdem6934 I'm not sure, your b20 has a 66mm stroke but I don't know the difference to the deck height from tdc and lift of the s50 cam. Someone will have tried it so I'd spend some time looking around the net. The only way to tell properly would be to put it together with clay on the piston crown and test for valve clearance. Good luck.
@filipHRboy
@filipHRboy 2 года назад
what pistons and piston rings did you use?
@ManSeeksCivic
@ManSeeksCivic 2 года назад
M54b30 pistons and stock goetze M54b30 rings.
@filipHRboy
@filipHRboy 2 года назад
@@ManSeeksCivic there are no problems ? because the m54 block has steel sleeves and the m52 only aluminuim
@ManSeeksCivic
@ManSeeksCivic 2 года назад
Coated/treated aluminium, that's as hard, if not harder than the steel that's in my M50 block. The internals stay the same.
@GimpSlayerGeneral
@GimpSlayerGeneral 5 лет назад
Who said YT don't do porn?
@nnedition7789
@nnedition7789 4 года назад
hp ?????
@ManSeeksCivic
@ManSeeksCivic 4 года назад
Sadly I've still not had it on a dyno. I moved to the North East of England just before our lock down and am seeking a decent shop to run it. Hopefully it'll be sooner than later. I believe it's around 240 now but won't know for sure until its been tested.
@davomyarse
@davomyarse 5 лет назад
so looking forward to this one progressing!!!
@abgingernuts
@abgingernuts 3 года назад
Sorry mate I'm not clued up. Why wouldn'r you just put the e46 engine in it?
@ManSeeksCivic
@ManSeeksCivic 3 года назад
Experience, enjoyment of building the engine, less wiring headaches, and as a learning process.
@abgingernuts
@abgingernuts 3 года назад
@@ManSeeksCivic well you definately seem to know your shit
Далее
M52B30 Bottom End Assembly
14:17
Просмотров 9 тыс.
E36 M50B30 Stroker Timing and Cam Setup
9:35
Просмотров 15 тыс.
小路飞嫁祸姐姐搞破坏 #路飞#海贼王
00:45
#kikakim
00:10
Просмотров 14 млн
Вопрос Ребром - Серго
43:16
Просмотров 1,6 млн
M52 STROKER ENGINE BUILD PART 1
15:42
Просмотров 155 тыс.
E36 Pre-Stroker Dyno Results Are In !!
8:12
Просмотров 4,7 тыс.
E36 M50B30 Stroker First Start & Drive!
9:58
Просмотров 23 тыс.
V16 из БЕНЗОПИЛ - ПЕРВЫЙ ЗАПУСК
13:57
BMW M50 vs M52 vs M52TU vs M54
29:41
Просмотров 182 тыс.
Power Gains for the E36 M50B30 Stroker
13:23
Просмотров 18 тыс.
小路飞嫁祸姐姐搞破坏 #路飞#海贼王
00:45