e37 - Replacing an Oil Squirter/Jet on a 2006 Mini Cooper S R53

Подписаться 1,3 тыс.

50% 1

After discovering a damaged oil squirter in my oil pan I had to get it replaced. Another fun job on my project car. Some people also call this an oil jet.
--------------------------------------------------------------------------------------------
Tools and Parts Links (I will make a small commission):
Haynes Manual I use -
haynes.pxf.io/rQLGJG
amzn.to/3EFDSER
Camera Gear
Sony ZV-E10 - amzn.to/426ZEM4
Sony 11mm F1.8 Lens - amzn.to/3WfCAIS
7Artisans 35mm F1.4 Lens - amzn.to/3Mk6pDA
Ulanzi MT-47 Tripod - amzn.to/42o2JXN
K&F 64" Tripod - amzn.to/3ANBY3d
SAMLLRIG Camera Cage - amzn.to/3nnMB9P
Newer 176 LED light - amzn.to/420nWXU
Become a FREE SUBSCRIBER to Regarding Automobiles now www.regardingautomobiles.com/
--------------------------------------------------------------------------------------------
Instagram ► / regardingautomobiles
Facebook ► / regarding.automobiles.3
--------------------------------------------------------------------------------------------

Авто/Мото

Опубликовано:

15 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@bimmer4624 10 месяцев назад

OMG you are a Hero I would of lost it and scraped it. Well done and Thank you for all your patients hope you get the reward you deserve .

@ja4476 10 месяцев назад

congrat 1k subs !! I've got two projects coming, a 91 yj jeep and a 2007 mini cooper. I don't need to convince everyone who is going the easiest one. When doing a simple repair on the mini, you need to disassemble half of the car..... After two minor repairs, you probably know 90% of every component of the car !!!! btw, you're a very patient guy, I'm sure some bad words are going to come of my mouth when I'll work on my mini !! :)

@tasdevl 10 месяцев назад

Congratulations on 1k subs, everyone who has an R53 should be watching your channel! It is refreshing (and I feel your pain) to see the same struggles I have with mine, instead of these mechanics who seem to perfectly work on everything with nothing going wrong.

@RegardingAutomobiles 10 месяцев назад

Yes! I always say if you own an R53 then watch modMini but then watch mine to see how it’s going to work for you as an amateur.

@johnhibbs6508 10 месяцев назад

Thanks! I'm a R53 owner too. I recently installed an oil pan baffle to prevent oil starvation during 100 mph 30-degree banking turns.

@RegardingAutomobiles 10 месяцев назад

I have the RMW oil pan baffle installed. Hoping it does the trick!

@smithiestrackmini 10 месяцев назад

Hissing, isn't it the compression coming out the valves into the exhaust as you rotate the crank. Sounds like a good thing to me well sealed pistons & valves. Also the engine will have the inlet open on the other 2 cylinders so you could hear a bit of inlet noise as well.... Mine has oil leak from the a system & a knock from the rear end u need to chase down. It's always something with minis, the time we get fault free driving them makes up for all the fix's we have to do 👍 PS: congrats on 1,000 subs 👍👏

@patryksodzinski9461 10 месяцев назад

"Hissing, isn't it the compression coming out the valves " - is or isn't ?

@smithiestrackmini 10 месяцев назад

@@patryksodzinski9461 It was posed as a question, I should have put an ? After the 1st sentence to denote it as a question. I then put my observations on what I thought it was.

@Secondrunnerup613 8 месяцев назад

So what was the tool you used to get the broken screw out with??

@RegardingAutomobiles 8 месяцев назад

Speed out! (My Amazon Affiliate Link: amzn.to/40aLaKG ) It worked because they are banjo bolts. I would have been royally screwed if if was a solid bolt.

@Secondrunnerup613 8 месяцев назад

@RegardingAutomobiles I have some of these. No you would have been OK. Just drill a small hole in the broken bolt shaft and put the appropriate size in. ( if there was one. That would have fit.) Thanks for the info.

@Secondrunnerup613 8 месяцев назад

@@RegardingAutomobiles happy mini motoring!!!!