EarthQuaker Devices: SWISS THINGS pedalboard reconciler

Подписаться 86 тыс.

Просмотров 9 тыс.

50% 1

www.earthquakerdevices.com
• Combines two Flexi-Switch™-enabled effects loops, a Flexi-Switch™ AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost with adjustable gain, expression pedal output for volume control, and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box
• Use as many pedals as you’d like without tone-suck
• Quickly and easily bypass all pedals with one click
• Use Flexi-Switch™ Technology with every pedal in your setup
• Eliminate volume pedal tone-suck by using any expression pedal to control volume
• Use multiple amps without phase issues, ground loops, or extra noise
• Improves pedalboard cable management
• Shortens cable runs to reduce capacitance which causes tone loss
• Keeps all inputs and outputs in one convenient location
• True bypass Silent relay-based switching with All-analog signal path
• Features EarthQuaker Devices’ proprietary Flexi-Switch™ Technology on Loop 1, Loop 2, Boost, and Both footswitches
• Lifetime guarantee
• Current Draw: 40 mA, Input impedance: 1M, Output impedance: 1K
Today's tools:
Guitar: 2018 Yamaha RS820
Amps: Fender 6G4 Super combo and HIWATT DR103 models - Axe-FX III. No noise gates were on for this video. The Swiss Things is dead quiet.
Extra effects: Klinger Bee Baa clone (see: profile.php?... GFI System Specular Tempus
Cables: Various
Power Supply: Strymon Zuma
Mic: Samson Airline77 (me)
Camera: Canon 60D (me) and Nikon D5100 (pedals)
Soundcard: PreSonus Quantum & Fractal Audio Systems Axe-FX III (guitar, mixing and bouncing).
Monitors: Blue Sky Media Desk 2.1
Computer: Apple iMac 27" i7 3.4 GHz 16 GB RAM
Software: Logic Pro X, Waves Plugins, Apple Final Cut Pro X (video editing and RU-vid compression).

Видеоклипы

Опубликовано:

7 янв 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@lyric.kayden 5 лет назад

Just picked up the same Yamaha RS820CR a couple months back and love it. Nice video, good job.

@tremelo68 5 лет назад

Cool aby switch! Like that it has loops too.

@somewhatlikealex 5 лет назад

Completely unrelated, but that is a fantastic shirt!!!!

@PoweredbyRobots 5 лет назад

Damn they got the hype down for what’s a nice but pretty much already available elsewhere pedal. Getting in on radial engineering, Carl Martin, lehle at last.

@tmitz73 5 лет назад

This thing looks sick!!

@dsrecords22 5 лет назад

that dirty tone is everything right now!

@gcvrsa 5 лет назад

Mother of God, that distortion sound! Is that *just* the BeeBaa??!! It's humongous!

@Xn4W 5 лет назад

I had one for about 3-4 months now but still figuring out every day since it's such new technology. So I use both single coil and humbuckers and use Lava solderless patch cables, voodoo 4x4 power supply, Polytune 3 in the Tuner out, a Dunlop Volume X expression in the EXP out, Keeley Compressor Plus BEFORE my SWISS Things Y as recommended in the EQD manual, a Boss NS-2 noise gate and a Timmy OD in my Loop 1. I actually leave my Loop 2 empty(because I don't like that the clean boost also boosts my Loop 2(only flaw I discovered in the Swiss Things, the Boost should only Boost Loop 1, so I put my Nova Delay and Boss RV-6 Reverb AFTER the B output of my Swiss Things until I get my 2nd amp for stereo in the future. I leave the Loop 2 empty as a result and just use it as a mute like you guys. I run all this through the front of my Fender Super Champ X2 on the clean channel. So my question, is it better to leave the Compressor in front of the Y input, put it in Loop 1 before my Timmy OD? I'm trying to use my single coil strat but get rid of my Noise Gate via clean isolated power, good solderless Lava patch cables, and good solderless DC power adapter cables. Also final question, with a side chained built in FX looped Boss NS-2 Noise gate, where and how should I wire the NS-2 in the Swiss Thing's signal chain? P.S. The Swiss Things has so much buffers in it on top of my buffered Boss Reverb, Boss Noise Suppressor, and Bonafide Buffered Polytune that's already on a buffered tuner out, so double buffering there, and I noticed my short Mogami cables actually sound darker and my longer Mogami cables sound brighter and has better signal. Is this due to having so many buffers in my chain?

@richscarff2990 5 лет назад

Hi mate. Love your work. I’m keen to know the brand of the tuner you are using in this clip. Cheers.

@SixStringHarmonies 5 лет назад

I would love one that creates a W/D/W setup, with stereo considerations for time/mod effects.......

@ESANANIKONE 4 года назад

Does it exists now ? I wish

@matrixmodulator 4 года назад

Hi i got 2 brand new swiss things and both have signal coming out of OUT B even if it is muted... I tried with active pickups first, then with passive pickups it's less apparent but when i activate the boost switch it passes a bit of signal through the OUT B, enough so that i hear it clearly.

@DragDealer 7 месяцев назад

Im soooo confused! Got one, I have a big board. Without the Swiss I get very little to no noise. Even stacking OD/Ds pedals. Today I hooked it up and did the loops 1 for gain pedals. 2 for modulations. And THIS THING! Add so much noise I thought I had a different board. Really I’m not bashing it. Not sure why it adds so much noise to my signal. Spent all day trying to make it work and no. I take it out of my signal and noise is gone. I add the pedal and the noise is there. 😅 best part is NO ONE online has the same experience everyone has a great one with this pedal. Why not me? 🤨

@DaleHauskins 5 лет назад

Angeleno Californian guitarist detectable Dale was in renowned Swiss progressive rock band Flame Dream (Vertigo Records). I am extremely proud to have inspired EQD by my longtime love of all things Swiss and so they named it “Swiss Things”.

@CarlosSantiago-td9eh 2 года назад

Could this pedal be used as an extra FX sends for a mixer? Can I plug into mixer instead of 2 amps?

@bluesnaggletooth1660 Год назад

Will a volume pedal in the volume input control the volume of the entire unit?

@robertfoster8025 5 лет назад

SOLD

@krisofnh 5 лет назад

Hi there! I just got this pedal in today, and I'm noticing a substantial volume drop once I kick in Loop 2. Do you notice the same issue with yours? Quick fix would be to add a boost pedal in Loop 2, but that's more $$.

@jplagarde2922 2 года назад

Omg i just emailed eqd regarding this i thought im the only one, what im doing right now is im kicking both loop 2 and boost to even the volume drop.

@DragDealer 7 месяцев назад

@krisofnh 7 месяцев назад

I don't recall if my issue was solved by replacing a patch cable or what- but as soon as I went down the route of stereo modulation effects, I parted ways with it. I did go with an Old blood noise signal blender at some point for variety and mixing pedal combos.

@xyzresearchlab 5 лет назад

a channel switching ABY pedal that doesn't have MORLEY users tears all over it... NOW I can use my two SKB-45s with TWO AMPS??? - ...to be honest doesn't Jamie still owe you a royalty for the Avalanche Run I bought because of your Demo? Cheers