No video :(

Easily Change a Pentair IntelliChlor Salt Cell to the New iChlor Cell -No Plumbing or Wiring Needed!

Swimming Pool Tips, Reviews & How To - SPL

Подписаться 126 тыс.

Просмотров 65 тыс.

50% 1

The iChlor is Pentair's latest and best salt water generator system. What makes the iChlor a real winner is how easy it is to upgrade your IntelliClor salt system to the new iChlor salt system. No plumbing or wiring is required and you can do this in about 5 minutes. The iChlor uses the same Power Center as the Intellichlor and the iChlor can be plugged in directly to an Easy Touch, IntelliTouch or Sun Touch Panel.
The iChlor 30 is rated for up to a 30,000 gallon pool and produces 1 lbs of chlorine every 24 hours while it is running. The iChlor 15 is rated for up to a 15,000 gallon pool and will produce 0.6 lbs of chlorine every 24 hours as it is running. If you have an IntelliChlor IC40 cell, don't worry about losing the 10,000 gallon production ability. Most homeowners have a pool with less then 30,000 gallons of water so the iChlor 30 should work fine in place of the IC40 cell. Compare the iChlor output with the IntelliChlor cells:
IC40 Cell produces 1.4 lbs of chlorine every 24 hours compared to the 1 lbs by the iChlor 30
IC20 Cell produces 0.7 lbs of chlorine every 24 hours compared to the 0.6 lbs by the iChlor 15
There are two ways to purchase the iChlor and there are two different sizes available. The iChlor is sold only in pool stores or you can purchase it from your pool service company. So you can purchase the complete bundle which comes with the iChlor cell, the Power Center and the special adapter to connect it to an existing 2” PVC line where the old IntelliChlor was connected at. The iChlor 30 bundle is part #523081. You save a little money if you purchase the iChlor 30 cell by itself #523009 and then also purchase the iChlor Adapter #523101. The only difference is that you are not getting the Power Center. If you have your IntelliChlor cell plugged directly into your automation this is the way to go since you do not need the Power Center. But if you are upgrading your system without an automated panel I suggest purchasing the bundle. That way you get the Power Center in case later on down the line you need it. Keep it in your garage as a spare for now.
So to install the iChlor you first turn the power off to the system. Make sure the IC20 or IC40 cell lights are all off and no power is going to the Power Center. Simply loosen the nuts on the old cell and remove it. Just as you would do when you go to clean the cell. Then unplug it from the Power Center. You will reuse the unions on the existing plumbing, since you can't remove them. I suggest using the o-rings from the new unions so you have a tight seal. Attach the adapter to one of the unions on the plumbing. Then simply attach the iChlor to the union on the adapter and the last union on the plumbing. Plug the iChlor into the old Power Unit. Turn power to system back on. That is it, congratulations - you have now upgraded your salt system to the iChlor!
Let me touch on a few features of the iChlor and why I think you shouldn't hesitate to upgrade to it if your IntelliChlor cell needs to be replaced. Here are some of the features of the iChlor:
Easily Retrofits an Intellichlor Cell & Power Center
Adjusts in increments of 1% for precise chlorine levels
Automation ready -ScreenLogic2 Interface
iChlor 30 produced 1 lbs of Chlorine running 24 hours
Detects an automatic cover - reduces output
Detects Intelliflo Pump activity
Automatic Reverse Cycling to prevent scale
Diagnostic menu shows 5 functions
Cell Life
Water Temperature
Salinity (Salt Level) Read Out
Voltage
Firmwire Revision
So the iChlor is a a big step up from the IntelliChlor cell in that it has a detailed Diagnostic Menu that wil display the Salt Cell Lifespan and more importantly the pools Salt Level.
If your IntelliChlor salt cell is at the end of it's lifespan consider upgrading to the iChlor 15 or iChlor 30 verses purchasing another IntelliChlor Cell.
Here is one of the only online sites that carry the iChlor Adapter if you don't want to purchase the Bundle. I couldn't find the adapter from my supplier so you may need to purchase it online or your local pool store may be able to special order it for you.
iChlor Adapter: www.getpoolpar...
iChlor Bundle: bit.ly/2K9Jfyv
iChlor Cell only: bit.ly/2HSnYJ6
Visit my Website: www.swimmingpoo...
eBook: www.swimmingpo...
RU-vid Video Index: poolmandave.blo... - A list of all of my videos:
Follow Me:
Google +: plus.google.co...
Blogger: poolmandave.blo...
Facebook: www.facebook.c...
Twitter: / mrdgvb1
Join me on Patreon: www.patreon.co...
Podcast: www.buzzsprout....
Shop INYOPools: www.inyopools.com?

Опубликовано:

19 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 88

@austinm3734 6 лет назад

Got 6 years out of our old ic20 cell. Hardly ever having to clean it. We took it in every winter stored inside and replaced with dummy cell. Low calcium levels

@rotfan77 8 месяцев назад

I’ve heard that the Intelichlor is better or more reliable than the ichlor and I have seen quite a few people in a video on RU-vid that have the same area leaking on their ichlor cell, I believe demonstrating that the Intelichlor is more durable.

@SPL 8 месяцев назад

You can't argue against older tech. Simple, well built, and reliable.

@2hyped72 2 года назад

You're supposed to install those vertically

@joeinfl5610 5 лет назад

I asked Pentair, and they said a tech should do the first install and then I could in the years to follow. I didn't see anything that "required" a technician.

@SPL 5 лет назад

I think they are referring to a full install. Not this method. You wouldn't need a tech for this. My 11 year old son can do this. 😜

@joeinfl5610 5 лет назад

@@SPL My new iChlor 30 should be here today. I sprung for the whole kit with the new power supply even though my current one is okay. Looking forward to having my pool working like it was. Thanks for the reply.

@deannab8890 Месяц назад

Our 2nd in 5 years until just stopped working. These things are pricey. Is there troubleshooting or a way to fix them?

@SPL Месяц назад

It all really depends on the output. These are rated for 10,000 hours of use. But you should be getting a longer lifespan.

@electricalsmokealarmsandmo1564 3 года назад

The extra sticker is for flipping the display. When the salt cell is installed, the display may be upside down.

@SPL 3 года назад

I figured that out - thanks!

@electricalsmokealarmsandmo1564 3 года назад

Can that be swapped out with a Hayward aqua rite without any plumbing required? I know I need to swap out the power center.

@TheDugarric1 2 года назад

Hello David, I have the ichlor 30 and my display is reading "cold" and cell light is red. I check the temp on the ichlor and it says 48 degrees, I know that inaccurate. Could it be my flow switch?

@SPL 2 года назад

Maybe a bad temp sensor in the iChlor

@snakerog 4 года назад

David, I just have to ask, please do not think bad of me. A lot of people are complaining about the Ichlor and the only person I have seen hyping it is you. My question is whether you receive any compensation from Pentair for recommending the Ichlor? Sorry, but I had to ask.

@SPL 4 года назад

I receive no money from the manufacturer and this cell was purchased at my local supplier for a customer. They had a bunch of bad flow sensors - same as with the Intellichlor. Go figure.

@Mr._Chievous Год назад

i was wondering the same thing because this guy is dispensing a lot of bad advice.

@snookmania1062 2 месяца назад

How long after you plug in your new ichlor salt cell till it boots up and starts producing chlorine again

@SPL Месяц назад

Usually right away.

@spirit4341 12 дней назад

Hello is a hayward salt cell and a pentair salt cell the same size

@SPL 10 дней назад

As far as gallon ratings they make a comparable units. Hayward is off though. The T-15 Cell is for 40k gallons where Pentair is clearer with their IC40 rated for 40k gallons.

@spirit4341 10 дней назад

Thank you appreciate your help

@danwhitehead9922 2 года назад

The second label is if it needs to be reversed, not a spare

@SPL 2 года назад

Yes, i figured that out later. 😜👍

@CSJiGSaW08 4 года назад

Whats better the Intellichlor or the Ichlor. I'm hearing bad reviews of the Ichlor not lasting or flowing properly with variable speed pumps.

@SPL 4 года назад

Ichlor works fine.

@Mr._Chievous Год назад

@@SPL wrong

@realgrapedrop 11 месяцев назад

My IntelliChlor IC40 (installed in June 2019) for the last 6 months has been showing the wrong Ph level; about 500 ppm too low. I also have the Pentair EasyTouch so everything is there. My pool is only 8,000 gallons. I think Pinch-A-Penny over sized the IntelliChlor. Does it make sense to get the iChlor 15 vs 30? I see the specs say iChlor 15 up to 15,000 gal and iChlor 30 up to 30,000 gal.

@SPL 11 месяцев назад

You can get away with the iChlor 15.

@melissaroberts2359 2 года назад

What are the best gloves for pool handling chemicals?

@SPL 2 года назад

These are the best amzn.to/3r57bez

@rubenscott3972 6 лет назад

I have to study this stuff

@SPL 6 лет назад

The iChlor is a better cell all around.

@josephrohland5604 2 года назад

Hi David, My iChlor has a slow GREEN FLASHING FLOW LIGHT while the SALT & CELL LIGHTS are just GREEN. What does this mean?

@SPL 2 года назад

I wonder if your flow sensor is defective. Pentair has been sending out free replacements.

@josephwalker2541 5 лет назад

Do you still think this is a better value than the ic40?

@SPL 5 лет назад

As long as your pool is under 25,000 gallons it makes sense to upgrade. It regulates chlorine production better allowing you to set the output to get the maximum life out of the cell. It is rated for 10,000 hours of use and if you adjust the percentage down correctly it is better in the long run.

@jackramsey1600 4 года назад

I can't seem to purchase one from anybody. need to replace my Intellichlor 40 for my 20Kgal pool,but can only find the Intellichlor. not the Ichlor30

@SPL 4 года назад

It is only sold at brick and mortar pool stores.

@alpagano50 3 года назад

Can I turn the display around 180 degrees?

@SPL 3 года назад

Yes.

@davidallott5826 Год назад

Hi there. Quick question... what are the differences, pros, cons etc between the iChlor and Intellichlor product lines? Pentair still sells both, so its not like iChlor was a supersede replacement for Intellichlor. Appreciate the help!

@SPL Год назад

The Intellichlor is a bit dated. I will jest tell you what the iChlor does and that the Intellichlor does not. Adjustment increments of 1%, salinity level reading, cell life countdown. If you have a pool greater than 30,000 the intellichlor would be better. Any other situation the iChlor is better.

@lisalammens1822 5 лет назад

is the iChlor Bundle all that is needed if I'm swapping out Hayward AquaRite for IChlor15 Bundle (#523081) to use with my EasyTouch #522355? I have ~11,000 gallon pool.

@ameremortal 3 года назад

One of the metal places (cells?) is eaten away on mine, any idea what caused it? Barely 3 years old, cleaned often using acid.

@SPL 3 года назад

Could be a defect in the manufacturing. I have seen that in only a couple of salt cells in all my years.

@ameremortal 3 года назад

@@SPL Thank you, I hope so, buying another cell for $800 😞

@porcelinaofthevastoceans3903 2 года назад

The acid cleaning itself can cause damage, especially if you are cleaning 'often.' If you dont see any visual buildup of scale and you dont see bubbles forming when you put acid in, then dont leave it in there more than 5 mins. If it is very dirty, spray it out w a hose first to losen, then use the acid, but again, when it stops bubbling, remove the acid.

@andrewsimmering9471 5 лет назад

Hi, Thanks for the great info! Can you confirm if the newer iChlor is compatible with the intellipH system?

@SPL 5 лет назад

I know it uses the same power center so it should be compatible.

@dalonsoarana 6 лет назад

You set it up at 80, how much do you recommend to set it, got mine on 20 as factory

@SPL 6 лет назад

Depends. How large is your pool and how long are you running the pump?

@Ty-ge4ib 5 лет назад

Swimming Pool Tips, Reviews & How To -MrDgvb1 My pools 16k gallons. I run it for 6 hours at 2200 during the summer and run it for 3 hours in winter.

@Crazyd2050 4 года назад

In your opinion this newer version is better than the original?

@SPL 4 года назад

I talked at length with Pentair on this. The iChlor has the latest software and can be set increments of 1%. The Intelichlor only in 20% increments. So this cell will last longer because you can fine tune the output and is less expensive to replace compared to an IC-40 Cell. It also gives you the salt level reading - so if you don't have an automated system this is a real bonus. Basically like buying a new car that has all the bells and whistles or buying a 14 year old model... tech-wise.

@Crazyd2050 4 года назад

@@SPL thx dude

@Lumpiada Год назад

Since the ichlor has been out a while now, do you still suggest it over the intellichlor? Do the cells last as long?

@SPL Год назад

It all depends on your pool size. 20,000 gallons and under the iChlor. Plus 20,000 an IC40.

@Lumpiada Год назад

@@SPL thanks so much! I saw another video where you can piggyback off the 220v line of the pool pump to power the salt power supply. Is this normally they way?

@Matt-py6nl 3 года назад

Hey bro, i have a customer with an IC20 and was thinking about swapping it with the Ichlor 15 ... can i still use the same power center? Tiny pool. 8k gallons. I know the ichlor15 is only rated for 110volt so im thinking if they have the current power center wired at 240v its gonna be a no go.

@SPL 3 года назад

You would be okay with the iChlor 15. I thought the power unit was dual voltage but you may need to call Pentair on that. But yes, you can use the same power unit.

@Bunkysworkshop 6 лет назад

Is this available for above ground pools? If so do you know what model?

@SPL 6 лет назад

What size above ground pool do you have? In Gallons.

@brianclayton1875 4 года назад

Hi, my Intellichlor 40 is going bad, green flashing check cell light, even after cleaning and checking chemistry. My pool is only 15k gallons, so don’t understand why the 40 was installed. Should I go with the Ichlor 30 or 15? 30 is only $100 more, if I go with it will it run less?

@SPL 4 года назад

Would go with the 30 and set it at 50%. This will give your cell a longer life span than a 15 running at 100%.

@brianclayton1875 4 года назад

@@SPL That's what I was thinking, thank you for confirming. Informative and helpful videos!

@arthurvin2937 5 лет назад

David, my newly installed iChlor 30 salt level reading is at 4400ppm - which is totally wrong. Water temp is 75F and it's running for 2 days already. I tested salt level many times with Lamotte Spintouch disks and it reads spot on ~3600ppm. I started with fresh water and added 15x40lb bags as per instructions to reach 3600 ppm from 0ppm. Do you know if iChlor can be recalibrated or what's wrong with it?

@SPL 5 лет назад

That is unusual for the new iChlor to be off. It could be a bad unit. Pentair warranties these against defects so contact the store you purchased it from to get a new unit. It sounds defective to me. 1000 ppm is way off.

@arthurvin2937 5 лет назад

@@SPL But it works just fine producing chlorine, I don't think I'll ever use iChlor salt reading. I trust SpinTouch more because it's more likely that iChlor has got bad reading rather than Spintouch.

@chrissnipes4472 2 года назад

Love your channel David, my Ichlor 30 had a CELL light on hot a few months back, opened up, some build up, did the mild acid bath, looked really clean. Worked for a few weeks CELL light again. Opened no build up. It does have 10,874 hrs, so is there anything to rebuild? I cannot find the CELL instock any where. I have a power supply that came with it that works fine. Is there a replacement CELL I can purchase if this one is not available any longer? or what do you recommend looking out to replace this brand?

@SPL 2 года назад

Your local pool store should have the cell in stock. Maybe a local pool service can also order you one. 10,000 hours means the lifespan has been reached and a new cell is needed.

@OP-nz7dl 6 лет назад

How often do you have to clean the new iChlor? My current IC20 needs to be cleaned every 3-4 months with muratic acid.

@SPL 6 лет назад

I talked to Pentair about that this AM. The iChlor should do better then the IC20. It does use the same cell plates but has improved technology - I just installed this one last week so we will see. I usually had to clean the previous cell ever 3-4 months like yours so hopefully they improved that part of things also.

@Mr._Chievous Год назад

@@SPL new technology is worthless if the cell doesn't last past a year or two.

@chrisheitman 4 года назад

The reviews on Amazon are really bad. Have you had any problems with the ones you've installed? Does this work better with an Intelliflow VSF pump? I keep mine set at 33 gpm and run it 20 hours a day. Thanks

@SPL 4 года назад

Not sure why so many negative reviews on Amazon. Technically they are not sold online so none of the reviews are verified purchases which makes them a little suspect. One said it displays "cold" which is normal when water temp is low. The dead screens are probably just the fuse. But a good product in my book.

@bennyz429 4 года назад

We have have the ichlor 30 and it is terrible. Having to replace it 3btimes in 3 years is horrible. Nothing, but problems. Wish we stayed with Hayward. The bad mazon reviews are legit and not suspect.

@busterd6672 4 года назад

How are the flow switches in these? I have a 4 year old IntelliClor IC15 for my 10k gallon pool and I have replaced the flow switch 3 times and they're definitely not cheap to replace!

@SPL 4 года назад

Same flow switch in both salt cell types.

@spseale 6 лет назад

Hey, so my pool is probably a little larger than 30k gallons. You think the iChlor30 will still be okay?

@SPL 6 лет назад

You would have to check with Pentair on that but I think you would be able to get away with it. You currently have an IC40 installed? Pentair: 800-831-7133

@spseale 6 лет назад

Thank you. Yes, I am currently running an IC40, but they seem to last only a couple of years. Consistent problems with their flow sensors, etc. I'll check with Pentair as well, and thank you for their number.

@miles267 6 лет назад

How does iChlor differ from IntelliChlor? Am running an IntelliChlor 60.

@SPL 6 лет назад

For one it won't produce as much chlorine as the IC60. You must have a very large pool? It is rated for 30K gallons of water or less. The main difference is that is eliminates some of the errors the IntelliChlor cells have, it has a salinity readout built in and it just works more efficiently then the Intellichlor cells. It is all around a much more hi-tech salt cell. The IntelliChlor Cell design is well over 10 years old. But if your pool is over 30K gallons you wouldn't be able to make the switch.

@miles267 6 лет назад

Swimming Pool Tips, Reviews & How To -MrDgvb1 thanks for explanation. Have a 25K gal. pool but opted for the IC60 to generate a low concentration of salt in fewer hours to prolong like of the cell. Noticed the iChlor isn’t yet available in larger output.

@SPL 6 лет назад

I would call Pentair and see what they think but I think upgrading even in your case when the time comes would work out well. Your replacement IC60 cell is like $800 and the iChlor cell by itself is $450. So even if you upgrade twice in 8 years the cost will be about the same and you are getting the latest salt cell technology. Just my thoughts.