No video :(

Easily Replace Brake Pads and Rotors 2012-2017 Hyundai Accent + Kia Rio

Подписаться 60 тыс.

Просмотров 47 тыс.

50% 1

Welcome!
Today we are swapping out the brake rotors and brake pads on a 2012-2017 Kia Rio, which is the same exact process on the Hyundai Accent from 2012-2017 as well. I replaced the brakes on one of those, as well.
replacing the brake pads and brake rotors for new brake pads and brake rotors is made easy with this video. I quickly and calmly show you how to remove the old braking pads and warped rotors that are also scratched grooved rotors with new slotted rotors, which were pretty affordable.
I also include the torque specs and bolt sizes to make things easy for you.
Products:
Brake Rotors/Brake Pads From 1AAuto: bit.ly/3ay0iZw
Or, Brake Rotors and Pads from amazon: amzn.to/30plKyg
Brake Cleaner: amzn.to/3lAMT9n
Brake Caliper Compressor: amzn.to/3v6TfR4
Affordable Torque Wrench: amzn.to/3mJ6mnG
Hand Impact Driver: amzn.to/3FIJhdv
Copper AntiSeize: amzn.to/3ByVrmV
Check out my channel and subscribe!
/ automotivate
I have a website:
AutoMotoNation.com
Have questions or just want to chat?
Here is my IG:
Instagram: / automotivate
#AutoMotivate #Brakepads #BrakeRotors

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@badass1g Год назад

Brother you forgot to take off the brake fluid cap when you pushed the piston back in. Otherwise great job 👍

@bawstonfan12 Год назад

What does this cause? I've done a ton of brake jobs and never done this and never seen an issue.

@JAlves88 11 месяцев назад

@bawstonfan12 not that big of a deal ur just pushing a lil dirty fluid back into the system, which prolly has dirty fluid in it already 😂

@aseriesguy Год назад

I have a 2012 Accent bought new in 2011. I am retired so I don't drive it a lot. 90% of my driving is short trips but I take IT on the highway every couple weeks and run between 70-85 where possible for an hour or so. At 45,000 miles it has never used oil between changes. The valves have never caboned up. The reason is I have used full synthetic oil since new. I always use Top Tier gas.

@sujaysoman Год назад

Great informative video! Well edited and clear instructions. Going to attempt this job on my 2014 RB Accent.

@AutoMotivate Год назад

You got this 💪 be safe

@Dark33_Qc Год назад

How’d it go?

@simoncridge6578 2 года назад

Good video.Strong emphasis on safety set up before attempting job in hand 👍☝️☝️☝️👍Going to do my pads + rotors. Just waiting for parts and a new torque wrench to arrive. Local garage quoted me £342.50 to supply and fit discs and pads. Can do it myself ; half a days work under £150.

@Rotwiler26 Год назад

Thank you,your video has help my dad and I change the front brakes on our 2015 Accent

@Pehr81 Год назад

No lubrication needed on the guide bolts?

@Iliek 2 года назад

Very informative, well shot and edited video. Thank you

@AutoMotivate 2 года назад

Thank you very much 🙏

@g33senpai 2 месяца назад

thanks for that reminder to check my oil. i'm not "due" for an oil change for another 1000 miles but my dipstick is already on low

@beachwalker2574 2 года назад

I needed a refresher on the Accent and thank you love that piston tool I still use my 1981 C Clamp I need to up grade to your piston tool ! Excellent job ! I did brush on some of that on the brake shoe numbin lol and thank you for pointing out the dip stick !!!! the stick read half way ! so I put in what i had 5w30 ... I did not know those cars burn oil no I have to watch it ! great job ty !

@AutoMotivate 2 года назад

No problem friend! If the car has been slightly neglected, then they are prone to burning oil. These Korean cars are finicky, but reliable if you keep the fluids topped off. Glad I could help!

@brentonfrance7400 3 месяца назад

My Kia Rio UB 2015 in Australia requires the rear brake caliper/ piston to be screwed back in using a Cube tool.

@sebasballeux Год назад

What's the torque for the bracket bolts ? All I hear is "between ninety seven two foot pounds"... 🤷🏻‍♂️

@deana.4660 Месяц назад

I know this is old but do you know what size the Philips is for the rotor?

@sean8190 10 месяцев назад

graat vid tho man, cant wait to save myself some cash and fix my brakes

@sean8190 10 месяцев назад

1:54 "Our nuts are now broken. Deez nuts. Dont want any other nuts broken... 😏" lmfao my ass off lol, goddamn right 😂😂😂

@jamesdevine7260 2 месяца назад

Good video mate cheers

@mohammedhawasli1 11 месяцев назад

Excellent video. Thank you for the insights brother

@unalatli3268 6 месяцев назад

Teşekkürler,5.19 sürede kullandığın gres mi ?Yoksa özel bir maddemi?

@Noormuffin 5 месяцев назад

It would be nice if you mention in your title that this is for the "Rear" pads and rotors. Thanks

@daveheys2699 4 месяца назад

He showed one front, one rear....

@revolutionar 7 месяцев назад

on GDI engines you always will have a 5L of 5w30 with you :))

@mikemanne8112 Год назад

very nice work !

@buckeyduck Год назад

Thanks for the video.

@thumperliciouz 8 месяцев назад

I stripped that screw. How would I get it out?

@officialmetroplexman3088 Год назад

What size was that star again? For the small two screws?

@YorkshireD1 Год назад

When changing the rears do you not have to do anything with the handbrake cable? That's the only thing that's concerning me. Thanks.

@debbiedreg6614 Год назад

@Reyeyawn Год назад

Everytime he says deez nuts I laugh 😂

@anyclipwithmrraven1030 Год назад

Thx Buddy

@ericromano8078 Год назад

This could be great but the camera is moving so much and the lighting is bad and the scenes change too quickly. It looks good but it's not good for absorbing the information. Please keep these in mind for your next video.

@sean8190 10 месяцев назад

why dont you absorb deez nuts lol

@767dag 2 года назад

is the rotor retention screw necessary , just had to drill mine off in back

@AutoMotivate 2 года назад

It is not! Had to drill them out on another car and just left them out

@Iliek 2 года назад

In my car there was only 1 of these screws in per rotor. They're just there to hold the rotor in place while you're installing the caliper and pad assembly. The lug nuts are what actually secure it. Though you'll have an easier time installing it correctly using the retaining screws.

@destroyuttobots Год назад

1:56

@debbiedreg6614 Год назад

1:57

@tyroneparker8399 2 года назад

Did you bleed the brakes afterward?

@AutoMotivate 2 года назад

I did not, no need to if you don't break open the lines.

@everready19373 2 года назад

Just be sure to pump the brakes BEFORE putting the car into gear!!

@johngreene6783 6 месяцев назад

Is he calling the caliper a caliber??

@AutoMotivate 5 месяцев назад

Cahlupur bro. Get it right

@salazmiguel5542 9 месяцев назад

I don't understand his accent when he says the torque specs.

@billybob917 Год назад

Oh yeah my accent loves to burn oil

@warrenmccormick8923 11 месяцев назад

Mine too (2016 accent). Didn't know this was a thing with these cars. Of course, just got the code for cat converter issue, so don't know if I need to replace or run some lacquer thinner through.

@rustyshackelford1483 2 года назад

This channel is like the Chris Fix YT channel. Only not as good and with far less viewers & subscribers.

@AutoMotivate 2 года назад

Oh dang, shots fired. I just create content different from him, which doesn’t mean it’s any less valuable

@Tyler_Wenya 2 года назад

This dude does great content don’t hate

@colinyandon6137 2 года назад

@@AutoMotivate Don't let that dipstick bother you my friend. I appreciate the video and will follow it step by step. Thank you.

@Iliek 2 года назад

Chris Fix is an informative channel but I dislike his speech pattern so much I won't watch any of his videos any more. With that forced style of speaking much like announcers and news anchors use, it's like listening to someone trying to sell you something instead of trying to help you out. It's an intentionally hypnotic way of speaking and I'm certain that's a major reason why he has so many views and subs.