Easy balancing with vibration meter and mobile app 

We are afraid the answer is no. This is a balancing method without phase measurement (no speed probe). The final mass is calculated from all 3 trial weights. If you have a device which can measure amplitude and phase, then you can place the trial weight just once and then you get the result. Check out this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rz4gUVwwHDo.html

This is absolutely correct: "the weight would be REMOVED from the location OPPOSITE where the balancer suggests placing the correcting weight". But we wanted to make the video more understandable. We also wanted to keep the Balancer App as simple as possible, therefore it does not contain remove (drill) weight option. Our vibration analyzers contains this option.

Yes. Very simple.

Yes, we call it Components function. Usually used for balancing of indstrial fans. Means you can define number of blades, for example that 8 and final correction weight will be split into 2 nearby blades instead of angle. You can check it for example in our Virtual Unit software which is free for download: adash.com/software-vibration-analysis/virtual-unit

Theoretically yes. But for high speed rotors would be better to perform standard balancing job with measuring amplitude phase and speed.

Not necessary.

Our vibration analyzers are mostly used for monitoring of industrial equipment such as el. motors, fans, pumps etc. But they can measure anything what generate vibrations. Even with our simplest device you can try it on el. scooters. Vibrio M: adash.com/portable-vibration-devices/a4900-vibrio-vibration-meter

There are a few "vibration meter" apps in the App Store. But there are very limited measurements, not applicable for machine condition monitoring nor balancing.

Unfortunately not. We guess we can make it if there will be a big demand for that from more people.

This balancing method does not need info about speed.

We recommend you our VA3Pro vibration analyzer which is capable of that. See here: adash.com/portable-vibration-devices/a4300-va3-vibration-analyzer Please contact our sales department regading price information: revaj@adash.cz

Balancing in one plane is just a geometric task. Let's construct the initial circle (centre 0,0; radius - init. vibration), circle a (centre A, radius - vibration with weight at position A), circle b (centre B, radius - vibration with weight at position B), circle c (centre C, radius - vibration with weight at position C). The result (point Res.) is then found at the intersection of the circles a, b, c. If the circles do not have a point as intersection, but only a region of intersection, then the result is somewhere inside (where? - that's a long story). So the Res. point is the result of a geometric solution. Position of Res. point determines the resulting final mass weight and the angle of position. Here the whole picture with circles is used to check the balancing calculation.

Please contact us via email. We will send you this procedure with an example. revaj@adash.cz

@@AdashCompany OK....

look up 4 run balancing

That would not be so precise sir.

iOS version will be hopefully ready early next year.

@@AdashCompany Hi There Has there been any update on the app availability for ios? Thanks.

Hello Mark. We have to admit that Balancer App for iOS had very low priority this year. We were all busy mostly with the new VA5Pro development and then of course continously improving our current devices and software. But we opened this issue internaly again and programmers should start on iOS app before end of the year. Hopefully to have good news for you soon!

Sorry, but not applicable for 2 plane balancing. But our vibration analyzers contains 1 and 2 plane balancing feature. For example VA3Pro: adash.com/portable-vibration-devices/a4300-va3-vibration-analyzer

Can you please specify in more detail? It is not very clear what you are asking about, thanks.

Yes it can. Just keep the same unit (your mm/s^2) during the whole balancing process.

@@AdashCompany as i suspected. Thank you very much for your reply ;)

There is something wrong in calculation of the final weight it must be 53g not 5.3

1.33 * 40 = 53

@@mohahm1492 Trial mass is 4.0 g, not 40. So it is correct sir :-)

Please contact our sales department regarding further info. revaj@adash.cz

What do you mean? To do balancing with our App you need some vibration meter. It does not matter which one. Is that your question?

@@AdashCompany Yes without vibration meter

@@amr.a-m8350 You need some vibration meter.

Here you go Sir: play.google.com/store/apps/details?id=com.adash.balancer&hl=en

That is really difficult question. You would need to be more specific please.

Thanks for your interests. Please contact our distributor for Malaysia regarding availability: www.intekma.net

You can use Adash balancing app with any vibration meter. It does not have to be Adash.

Contact our sales department on this email please: revaj@adash.cz