**PLEASE SUBSCRIBE** www.youtube.com...
Want to support the channel?
SEXY WOODWORKING SHIRTS: woodworkingshi...
!!!!*****BUY ME A BEER*****!!!!
Did I do a good job? Buy me a drink man! I deserve it! I'm toasting to my supporters at the end of videos and would be stoked to say a toast to you!
Here are a few methods how (Make sure to leave a comment, I'll cheers with the best one):
Venmo: Tyler-S-22189
Cash App: cash.app/$wood...
Or buy me beers monthly by becoming a Patreon: / woodnerds
Cheers everyone!
Alright Nerds! Follow me as I build a really cool dog bed / kennel / dog crate in the form of furniture. I'm not lying when I say this project has made me a better woodworker. Some of the things I show you here I'll be using on a ton of woodworking projects in the future. Really excited to show this one to you all! Let's get to work!
Wood Nerds Website: www.woodnerdshq...
Cut list/buy list
---------------Buy (I used pine but any wood would be beautiful):--------
12 - 2x4s (I had extra)
5 - 1x2s (I had extra)
1 - 4x8 sheet 3/4 plywood
1 - 4x8 sheet 5mm plywood
----------------------Cuts:---------------------------
I started by milling all my 2x4s to
1-1/4” x 3” and then the lengths I need for the bars to 1-1/4" x 2" (you don’t have to do the same but will have to adjust some measurements to get similar results)
Bars: (cut a few extra as backups and testers)
***14 @ 1-1/4” x 2” cut @ 9” long
Door:
***3 @ 1-1/4” x 2” cut @ 16-1/8” long(Door bars)
***2 @ 1-1/4” x 2” cut @ 19” long
***2 @ 1-1/4” x 2” cut @ 20-1/8” long
Legs:
***4 @ 1-1/4” x 3” cut @ 29-1/4” long (each with two special cuts)
Special cuts:
(Back legs only) Slot is 1/2” deep, 9-1/4” long, and about 3/16” wide (might take several passes to sneak up to fit the 5mm plywood) starts 5-1/2” up from the bottom of the leg and 1-1/8” in from the backside) (see diagram for dimensions)
Stopped rabbet on back legs start 5-1/2” up from bottom, runs 9-1/4” long and is 1/2” wide. Depth setting should be done with your router (around 5mm or 1/8”)
Side Rails:
***6 @ 1-1/4” x 3” cut @ 31-3/4” long (4 with special cuts)
Special cuts on 4 Rails :
1/2” wide rabbet, runs entire distance of rail at 3/16” deep (5mm plywood)
Front/Rear Rails:
***5 @ 1-1/4” x 3” cut @ 23-1/4” long (2 with special cuts)
Special cuts (on 2 Rear rails ONLY!!!):
1/2” wide rabbet runs entire distance of rail at 3/16” deep (5mm plywood)
1x2:
Top edge banding:
2 @ 5/8” x 1-1/4” cut @ 39” long (long end)
2 @ 5/8” x 1-1/4” cut @ 27” long (long end)
(Definitely measure your carcass for these measurements)
Plywood:
Top:
3/4” plywood cut @ 25-3/4” x 37-3/4”
Bottom:
3/4” plywood cut @ 23-1/4” x 35-1/4”
Side panels:
2 @ 5mm cut @ 9-1/4” x 32-3/4”
1 @ 5mm cut @ 9-1/4” x 24-1/4”
Linked tools/Materials: -
-Leveling feet: amzn.to/3kecx3k
-Barrel bolts: amzn.to/3lq7w76
-Hinges: (Found my 3" 5/8" radius hinges at Lowes)
-Polyacrylic: amzn.to/3AmbrIc
-Foam roller: amzn.to/3zjn2qn
-Kreg Pocket Hole Screws (2" Coarse): amzn.to/39cl7cr
-Kreg Automaxx Clamp (6"): amzn.to/3lxkhNd
-Pocket hole plugs: amzn.to/2Z6DXzZ
-Ryobi Hinge Guide: amzn.to/3nLHYUV
-Right angle positioning squares: amzn.to/3nDLiBl
-Titebond III: amzn.to/3hJwa2d
-Speed Square (super useful and cheap!): amzn.to/2VkhCZr
-Punch: amzn.to/3AjV0MK
-DeWalt Planer: amzn.to/3Esecuf
-Bosch Router: amzn.to/2XiLRoZ
-Small upcut bit: amzn.to/2Xr6M9z
-Bigger rabbet bit: amzn.to/3AmckR2
-Flush trim bit: amzn.to/3tLuXLM
-Angle finder: amzn.to/3kh5sin
Camera Gear:
Sony A7Riii: amzn.to/2Sk4Qdv
A7iii (Cheaper but awesome alternative): amzn.to/2Slj4dZ
GoPro Hero 5 Black (Lowest Price): amzn.to/2RyotQ0
Tripod: amzn.to/2zB3mF4 Lights: amzn.to/2y24Ack
Lapel Mic: amzn.to/2BSznGe
Microphone with deadcat: amzn.to/2VnyLBj
Song rights code: 4NQLQOTG2UNSEMR0
Song rights code: VBMDX5TCGGRSK5QF
_____________________________________________________ Disclaimer:
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
18 сен 2024
